Top Sellers
Fuel Hose, Type B-2 5/16" from MOELLER
We offer 5/16" and 3/8" SCG B-2 alcohol-resistant hose as used in pre-assembled fuel line. Sold by the foot.
|
Hatch Riser Arm for 20" x 20" Hatch from TAYLOR
Replacement arms for Taylor hatches from 1987 to the present. Universal arms can be left or right.
|
|
|
1/8" NPT X 5/16" Brass hose barb from MOELLER
1/8 NPT X 5/16" Brass hose barbs with male threads.
|
1/4" NPT X 5/16" Brass hose barb from MOELLER
1/4 NPT X 5/16" Brass hose barbs with male threads.
|
Fuel Line - 5/16" - Universal from MOELLER
Each assembly comes complete with a large alcohol resistant primer bulb with fittings, co-extruded braided fuel line hose which is alcohol resistant, and barb connectors which can be used with large, as well as small engines. Assemblies use a compounded, tough & pliable UV-resistant hose. Promotes maximum fuel flow. Includes fittings built to OEM Specifications for replacement parts. Uses o-ring construction on all fittings for tight, leak-free connections. Specifications: 5/16".
|
Fishing Boat Cover - HS Blue 15'5"-16'4"/65" Beam from TAYLOR
Patterned to fit basic fishing boats with bench seats. (These covers are not patterned to fit over trolling motors. ) The bow and transom corners are reinforced to protect the cover from sharp aluminum edges. Poly Cotton Fabric: Trailerable 65% polyethelyne/35% cotton Breathable Mildew & Stain Resistant Water Repellant Heavy-gauge shock cord in hem 2-year limited warranty Color: Silver Gray. Hot Shot Fabric (HS): Trailerable 100% urethane-coated polyester 7.
|
84”L Fiberglass Bow from TAYLOR
Bows moounted in bow sockets are the sure and easy way to keep a boat cover taut and free from water-collecting pockets. Sockets can be mounted on any rail system or anywhere on deck wall. Rubber gasket provides snug fit for fiberglass bows. Super strong and flexible, will not take a “set”. Cut to desired length. Incude rubber end covers to grab socket.
|
Replacement Gas Strut, 12" Compressed x 20" Extended Length, 40lb. Rating from TAYLOR
Reliable gas struts incorporate a strong annealed steel rod with a special coating for added corrosion resistance. Recommended by the manufacturer for use as dock box lid supports or hatch supports. Where use as a hatch cover support is desired, we recommend you base your selection upon the recommendation of the hatch manufacturer.
|
Adjustable Lock from TAYLOR
Three-part system provides easy snap-on/snap-off fender attachment and adjustment. A stainless base mounts to your boat, into which a peg snaps to hold the fender strap (sold separately). Fixed peg requires tying a knot to secure the fender at the desired height. Adjustable peg - adjust fender height by simply pulling on the strap. Max.
|
T-Top Boat Cover, Center-Line Length 20'5" to 21'4", Blue from TAYLOR
The main features of these covers are: Bow and stern sections are separated into two halves. The sections are joined through the use of a 7mm single pull molded nylon zipper on both the port and starboard sides. Cover design incorporates a "console tube" section with two adjustable straps which lift and secure the cover halves up and over the console body and up under the T-top. The top edge of console tube incorporates an adjustable draw rope in both front and rear sections.
|
Welcome Aboard Mat, Navy, 18" X 30" from TAYLOR
High-quality, marine-grade mats will add spice to any deck or door. Made from plush carpet that is waterproof, stain- and fade-resistant. Mats are mold- and mildew-resistant and feature a nonskid rubber backing.
|
Sully Stick Winter Mooring Buoy from TAYLOR
Extend the life of your mooring with our ice-proof stickUse this long tapered buoy in place of a standard round buoy during winter months to help prevent ice entrapment and extend the life of the mooring by protecting it from the damaging effects of freezing temperatures. Molded in eyelet at the top allows for easy retrieval and the base eyelet is reinforced with galvanized metal brushing to attach a rope and connect to the anchor chain. 80"L x 6" Dia.
|
Medium Edging, White, 25' Coil, 3-1/2"H x 1-1/2"W from TAYLOR
Prevent scuffing when you dock Vinyl dock guard is specially formulated for softness and durability to protect your boat or dinghy. Each piece installs easily with screws or nails to the edge of docks, piers and floats. Material: Extruded PVC . Attachment Method: Stainless steel dock nails . Shock Absorption Mechanism: Flexible PVC .
|
Single Deck Chair Cover, 24"H x 24"W x 22"D from TAYLOR
Protect your seats from the elements!Heavy-duty waterproof poly/vinyl blend keeps your seats from cracking and fading. Poly/vinyl blend is softer and more pliable than traditional vinyl.
|
|
Buoyancy from TAYLOR, Orange from TAYLOR, 5"H from MOELLER, 40mm from PYI
|
|
Home -> Fishing -> Reels -> Baitcasting Reels->Curado E Baitcasting Reel
Winner of the 2008 ICAST New Product Showcase Award for Best Freshwater Reel and Best of Show. The new 200's are smaller than 100's with the capacity of a 200. Lightweight Graphite Sideplates (Aluminum Handle Side on 300 sizes). Recessed Reel Foot. Super Free Bearing Supported Pinion Gear System (SF). A7075 Aluminum Magnumlite Spool. Dartainium Drag. 7 Bearings - 1 S A-RB BB - 5 Shielded Stainless Steel BB - 1 A-RB Roller Clutch Bearing. Variable Brake System (VBS) with Reduced Mass Hub.
Part No: CU200E7
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers->Bunk Board Boat Guides
Align and load your boat easily. A tilting bracket allows the boards to hug the hull. Marine-grade 2" x 4"s and galvanized steel posts and hardware stand up to corrosion, even in saltwater. Fits trailer frames to 3" x 4 1/4" and allows the galvanized post(s) to extend up to 13" out from the edge of the trailer frame. 5'L model includes two mounting posts each. 2'L model includes (and requires) only one post per board. Mounting hardware included.
Part No: 27600
|
|
|
|
Home -> Engine Systems -> Fuel Tanks -> Permanent Fuel Tanks->Permanent Below Deck Fuel Tanks
Moeller permanent tanks are favored by quality boat builders. Cross-linked rotationally molded polyethylene fuel tanks are UV stabilized and impervious to corrosion and ethanol-enhanced fuel. S. They’re equipped with an electrical fuel sending unit for use with a dash-mounted gauge. Measurements do not include fittings. Add 2 1/2" to height for fill neck. Allow for hydrocarbon swelling that adds about 3% to measurements in all directions. Quality features: Fittings with highest O.
Part No: 032515
|
|
|
|
Home -> Fishing -> Reels->Stradic FI Spinning Reels
Reel-Spin STRADIC 4000FI Almnm|Reel-Spin STRADIC 4000FI Almnm.
Part No: ST4000FI
|
|
|
|
Home -> Shoes & Boots -> Leather Boat Shoes -> Men's Leather Boat Shoes->Men's Gold Cup Billfish 3-Eye Boat Mocs
Vibram non-marking rubber outsole with Wave Siping Cushion midsole and full length, triple-density footbed with memory foam Genuine deerskin lining.
Part No: TAN/BEIGE-12
|
|
|
|
Includes software CD, memory cartridge and USB peripheral device for connecting your C-cartridges to the computer. System requirements: Windows 95/98/2000/ME/XP, 8MB RAM (32MB for 2000, ME and XP), 4MB available disk space, VGA display, one available USB port View contours, soundings, port information, marina information, tide data . Create and change routes, measure distances, edit waypoints and marks . Enables transfer of saved trip plans to C-MAP memory card for use in your chart plotter .
Part No: Mplanner XX
|
|
|
|
Home -> Electronics -> Video, Stereos, Weather Radios->Platinum Series Flush Mount Speakers
Three-way speakers for rich, crisp soundThe Platinum Series are high power, waterproof speakers that offer superior sound for discriminating listeners who demand the best audio quality. They are the first truly waterproof, full-range marine speakers to offer the performance of a home stereo system, plus the construction to withstand the most severe effects of sun and salt water. Speakers handle 200W peak per pair (except the 6 1/4" round speakers, which are 160W peak). Impedance: 4 ohms .
Part No: MA6500W
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring->Sur-Moor Taper Buoy
This buoy's taper shape design places more flotation area at the waterline creating a higher visibility mooring. Hard-skin buoys feature a reflective blue band to increase visibility and a Tube-Through-The-Center design. Hardware not included.
Part No: 46718
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Dock Bumpers->Dock Pro™ Inflatable Dock Wheels
Smooth rolling wheels fend your vessel away from the dock. Molded-in standard-needle inflation valves let you adjust firmness. Hot dip galvanized hardware. Strong, 2"dia. axle housing on the 12" and 18" model, and 3/4" dia. axle housing on the 9" model. Material: Vinyl. Attachment Method: Galvanized hardware. Shock Absoption Mechanism: Inflated vinyl bumper.
Part No: 1082
|
|
|
|
Home -> Engine Systems -> Fuel Tanks -> Portable Fuel Tanks
28. 00"L x 15. 00"W x 12.
Part No: 031620
|
|
|
|
|
Home -> Shoes & Boots -> Leather Boat Shoes -> Men's Leather Boat Shoes->Men's Gold Cup Billfish 3-Eye Boat Mocs
Vibram non-marking rubber outsole with Wave Siping Cushion midsole and full length, triple-density footbed with memory foam Genuine deerskin lining.
Part No: TAN/BEIGE-13
|
|
|
|
Home -> Electrical -> Chargers & Inverters->ProSport Battery Chargers
ProSport Generation 2 On-Board Marine Battery Chargers rise to the next level of performance. Rugged 100% waterproof and shockproof design with advanced electronics in a heavy-duty, compact, lightweight case. Maintenance Mode is safe for short- or long-term storage. User Selectable Functions: 3 Charge Profiles—User selectable performance charge profiles for: Flooded (lead-acid)/Standard AGM, GEL & High Performance (HP) AGM. Conditioning/Maintenance Mode for lead-acid batteries .
Part No: 42020
|
|
|
|
|
Home -> Shoes & Boots -> Leather Boat Shoes -> Men's Leather Boat Shoes->Men's Gold Cup Billfish 3-Eye Boat Mocs
Vibram non-marking rubber outsole with Wave Siping Cushion midsole and full length, triple-density footbed with memory foam Genuine deerskin lining.
Part No: TAN/BEIGE-8 1/2
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Fenders->Tuff End™ Round Fenders
Tough enough to meet the punishing demands of the commercial marine industry Tuff End buoys feature heavy duty seamless construction to meet the punishing demands of the commercial marine industry. The curved design hole prevents chafing. Compressor or football needle valve inflation. Made from thick-walled marine grade vinyl for durability. Injection molded ends for high strength. Trivalve™ for easy inflation with football needle or compressor. Great for larger boats or rafting! .
Part No: 61155
|
|
|
|
Home -> Electronics -> Video, Stereos, Weather Radios->VHF Accessories
ICOM VHF Accessories include: Chargers and adapters 12v Lighter cords Battery packs and trays Flush mount kits And more!.
Part No: HS-95
|
|
|
|
Home -> Anchor & Docking -> Windlasses & Rollers->Windlass Gypsies
Windlass Gypsies.
Part No: 605298RC6K
|
|
|
|
Home -> Plumbing -> Marine Sanitation->Heavy Duty Holding Tanks
Heavy-duty holding tanks for tough jobs! USCG-approved tanks manufactured from white FDA-approved polyethylene. Molded-in, threaded ports eliminate stress cracks and leaking. Extra-heavy 1/4" wall thickness for strength and lower odor permeability. All ports are standard sizes . Tanks have two 1 1/2" female inlets and one 1/2" female vent inlet . Note: Plumbing fittings not included.
Part No: 01-24WMH
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers->Boat & RV Trailer Wheels & Tires
.
Part No: 714612B215C
|
|
|
|
Home -> Electronics -> Global Positioning Systems->BlueChart g2, Europe South Atlantic Coast, Garmin Datacard
Garmin’s new BlueChart g2 cartography gives mariners detailed offshore coverage with features beyond traditional BlueChart. Integrated maps provide a much smoother presentation on your plotter screen. View charts in 3D perspective. View richer detail and content plus coastal roads and points of interest (POIs), photos of ports, marinas and more (Note: photo coverage is limited to certain areas currently; coverage will grow). .
Part No: 010-C0851-10
|
|
|
|
Home -> Electronics -> VHF Radios & Communications -> Fixed Mount VHF Radios->VHF650 Class D DSC VHF Radio
"When we received the pre-production samples of the VHF650 at West Marine, I “borrowed” one and installed it on my Zodiac RIB. The first thing I noticed was that its short chassis fits the console perfectly and doesn’t protrude like the old radio. It’s also a cinch to use, since the dot-matrix LCD display has a scrolling menu function that makes it easy to set up DSC functions and to change display settings. It doubles as a weather monitor that can alert you to a killer storm on the way.
Part No: VHF650 BK
|
|
|
|
Home -> Fishing -> Reels->Torium Conventional Reels
Modeled after the Trinidad, but without the premium price tag. The Torium is a high-speed durable reel with excellent castability and the brawn to take on big, fast fish like yellowtail and bluefin tuna. The frame is diecast aluminum with aluminum and graphite sideplates for lightweight and high strength. High efficiency gearing provides the high torque needed to turn big fish. One of the best values around in big water casting reels. Ball Bearings: 3 ball, 1 roller. Handle: Right hand.
Part No: TOR-16
|
|
|
|
Home -> Electrical -> Chargers & Inverters->Marine Multi-Battery Isolators
Battery Isolators have the ability to charge multiple batteries automatically from one or two alternators eliminating overcharging. Features include a heat-chamber design, and a corrosion-resistant casing to withstand harsh marine environments. Prevents the higher charged battery discharging into the lower battery. Each battery bank provides current control. Ignition protected, compact and easy to install. Mfr.
Part No: 93-BI70/2-A
|
|
|
|
Home -> Fishing -> Reels->Slammer Live Liner Reels
Trophy-hunting? Use a Slammer reelFor the serious angler targeting trophy fish. Their over-sized, sealed drag located under the spool ensures consistent and smooth performance. These Live Liner models have all the Slammer features plus the benefit of an automatic Live Liner drag. They're the perfect reels for anglers who prefer the ease of a spinning reel, but the practicality of a conventional reel. Live Liner drag is adjustable. Fish various sized baits.
Part No: 760L
|
|
|
|
Home -> Fishing -> Reels -> Spinning Reels->Spheros Salt Water Spinning Reels
Stopperless Design . Aluminum Frame . Graphite Sideplate . Graphite Rotor (Aluminum on 14000 & 18000 sizes) . Power Roller III Line Roller . S-Arm Cam . Aerowave Oscillation (3000 & 8000 sizes only) . Aero wrap Oscillation (14000 & 18000 sizes only) . 3 + 1 Bearings (4 + 1 on 14000 & 18000 sizes only) . Super Stopper II Anti-Reverse . Direct Drive Mechanism .
Part No: SP18000FB
|
|
|
|
Home -> Paint & Maintenance -> Winterizing & Storage -> Boat Stands->Adjustable Boat Stands - Power Boats
These adjustable stands support and stabilize the weight of a boat on land Every stand features easy-to-use handles for quick and secure adjustment and every stand has been totally submerged in paint to resist rust, inside and out. Full-length center pipes ensure stability and provide extra protection for the full-size 1 7/16" Acme threads. Angle iron bases prevent damage to pavement. A safety chain notch accepts 3/16" galvanized chain. Bow-heavy boats require a Vee at the bow.
Part No: MB-3
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->PSS (Packless Sealing System) Shaft Seals
PSS (Packless Sealing System) Shaft Seals for various shaft sizes .
Part No: 07-112-1
|
|
|
|
Home -> Engine Systems -> Steering Systems->Safe-T® Quick Stern Drive Rotary Steering System
Rotary three-turn steering kit with a quick connect cable set up to cut down on installation time. This system works on most boats with power steering assist, inboards and small outboards under 50hp where NFB isn't required. Boat Type: Virtually all power-assisted outboard, stern drive, and inboard boats . Steering Type: Rotary . Turns Lock-to-Lock: 3 . Dimensions: 4-7/8"D behind dash front x 6-7/8"W x 5-5/16"H . Steering Wheel: Up to 16". Not included .
Part No: SS13715
|
|
|
|
Home -> Engine Systems -> Steering Systems -> Steering Kits->The Rack™ Stern Drive Rack and Pinion Steering System
Great for inflatables, bass boats, jet boats and small cruisers with a small space behind the dash. Uses a machine cut pinion gear, which engages a pre-assembled rack and cable with armor-stranded core. Includes rack helm, 90° bezel, bezel kit, steering cable with stainless steel output end. Steering wheel and link-arm kits sold separately. Boat Type: Virtually all power assisted stern drive boats . Turns Lock-to-Lock: Four . Dimensions: 6 1/2"D from dash front, 28 1/2"W .
Part No: SS14113
|
|
|
|
|
Home -> Fishing -> Reels -> Spinning Reels->Spheros Salt Water Spinning Reels
Stopperless Design . Aluminum Frame . Graphite Sideplate . Graphite Rotor (Aluminum on 14000 & 18000 sizes) . Power Roller III Line Roller . S-Arm Cam . Aerowave Oscillation (3000 & 8000 sizes only) . Aero wrap Oscillation (14000 & 18000 sizes only) . 3 + 1 Bearings (4 + 1 on 14000 & 18000 sizes only) . Super Stopper II Anti-Reverse . Direct Drive Mechanism .
Part No: SP14000FB
|
|
|
|
|
Home -> Shoes & Boots -> Leather Boat Shoes -> Men's Leather Boat Shoes->Men's Gold Cup Billfish 3-Eye Boat Mocs
Vibram non-marking rubber outsole with Wave Siping Cushion midsole and full length, triple-density footbed with memory foam Genuine deerskin lining.
Part No: TAN/BEIGE-9
|
|
|
