Top Sellers
Hatch - Ocean 60 Flat Base from LEWMAR
Well-engineered hatches with CE-certified quality materials and construction. Smoothly styled external hinge enables one-hand operation. Inside handles feature locks that cannot be forced from the outside. Flat base or 1'' flange base (pictured). 3-year warranty. Flat base cutout sizes: Ocean 10 - 10" x 10". Ocean 20 - 7-3/4"W x 13-1/2"L. Ocean 30 - 12-5/8"W x 17-3/4"L. Ocean 40 - 16-3/8" x 16-3/8". Ocean 44 - 17-3/16" x 17-3/16".
|
Zinc Grouper Anode from CANADA METALS
Supplements your boat's existing anodes An excellent anodic device to supplement a vessel’s existing anode system, especially to counteract stray current from defective shore power. Clip to bolt on outdrive. Clip to grounding strap if possible or wire items together with copper wire and clip to wire. Do not connect to negative battery terminals. Dimensions: 8 1/4"L x 3 1/4"W x 1 3/8"D.
|
33C Red Jacket Cable, 18' from TELEFLEX
The most widely used cable type in the world. 8" minimum bend radius. Cable adapter kits available for use with Mercury, MerCruiser, Johnson/ Evinrude, and OMC sterndrive. 3" travel.
|
4300BC TFX Cable - 20' from TELEFLEX
TfXtreme's unique design assures smoothness and efficiency–with hardly any lost motion–even in the longest and most complex cable routings! This means superior feel at the control, in any boat–performance that had been considered "impossible". TfXtreme achieves the "impossible". Patent-pending splined core to achieves the impossible–easy movement and minimum lost motion.
|
Snap-On Cable Cover, 1/4" Wire Dia. from DAVIS INSTRUMENTS
White vinyl cable covers in 6' lengths. Tubes split down length and install in seconds.
|
Aluminum Transom Support Master Mounting Kit from TELEFLEX
Universal mount for most outboard engine steering applications. This kit includes the Teleflex Outboard Clamp Block, Support Tube, and the Clevis Kit.
|
Big-T Rotary Helm from TELEFLEX
Die-cast gears and added shaft support help it hold up to tough use. For single or twin station powerboats up to 34'. Boat Type: Inboards and power-assisted sterndrives, up to 34' . Steering Type: Rotary . Dimensions: 6-13/16"D behind dash front x 6-3/8"W x 5-1/16"H . Steering Wheel: Up to 20". Not included . Steering Wheel Shaft: 3/4" tapered . Cable Type: QC II SSC61XX or SSC72XX . Mounting Hardware: Requires bezel kit sold separately .
|
Side-Mount with Trim & Tilt 4-Wire from TELEFLEX
SL-3 is specifically engineered for installation without control modifications. Port or starboard installation with various cable-entry angles. Adapts for push or pull mode without tools. “Easy-On” cable design means no shift or throttle adjustments. Optional trim switch in handle grip for one-hand operation. Functions: Gearshift/throttle . Levers: Dual functions—each lever controls throttle and shift . Lever Material: Metal . Features: Push button for neutral Adjustable brake .
|
Twin Straight Handle Control, Chrome from TELEFLEX
Stylish low profile flush mount design available in several function and style options. For single or dual station applications with single or twin engines. Single function (each lever controls shift or throttle). Suits 33C type cables.
|
Auxiliary Steering Kits for Trolling Motors - Zinc Rod from MARINETECH PRODUCTS
Steer your trolling motor with your boat's main steering wheel. These connector rods attach the trolling motor directly to the main engine—when the big one moves, the little one moves along with it. Kits come complete with two quick disconnect ball joint assemblies which make taking it off when you don't need it easy. Connect rod length is 24", cut it to size for a perfect fit. Use the drive bracket for motors that have SeaStar or Teleflex steering.
|
Roller Shaft Cap Nuts Only - 1/2", Pack of 8 from C E SMITH
Roller Size Length Shaft Diameter Shafts and Nuts 4" 5 1/4" 1/2" 4" 5 1/4" 5/8" 5" 6 1/4" 1/2" 5" 6 1/4" 5/8" 8" 9 1/4" 5/8" 10" 11 1/8" 5/8" 11" 12 3/4" 1/2" 12" 13 1/2" 5/8" Shaft Only 18" 19" 5/8" Cap Nuts Only Packs of 8.
|
SW Inverter/Charger Remote Panel with 50ft. Cable from XANTREX
Designed for use with SW and PS inverter/chargers, the SWRC is a full-function remote control with backlit LCD display. The remote control comes with a standard 25’ (7. 5 m) cable or a 50’ optional (15 m) cable.
|
3/8" Bow/Stern Eye - 1.03" ID Between Studs x 4.63" Thread Length from SUNCOR
Bow / Stern Eye 304 Stainless Steel - Formed . Each U-Bolt set includes four nuts (two standard and two beveled) . Includes one bow plate, and one stern plate. . Threads are "UNC". . Stock size: 3/8" . ID between studs: 1. 03" . Thread length: 2. 50" .
|
Polycord Value Pack (10 polycords in assorted colors & lengths) from POLYFLEX
Unaffected by chemicals, sunlight, salt water and oil. Perfect for cover tie-downs, lashing jibs on deck when the chute is up, etc. Molded elastomers with glass-reinforced nylon hooks always return to original length.
|
Repl. Cylinder - Repl. Hynautic Model K2 from TELEFLEX
Hydraulic Cylinders -- the same quality steering components that comprise the many Hynautic systems may also be ordered independently for both new or retrofit applications.
|
|
11' Cable Length from TELEFLEX, 12' Cable Length from TELEFLEX
|
|
Home -> Engine Systems -> Steering Systems -> Steering Kits->The Rack™ Stern Drive Rack and Pinion Steering System
Great for inflatables, bass boats, jet boats and small cruisers with a small space behind the dash. Uses a machine cut pinion gear, which engages a pre-assembled rack and cable with armor-stranded core. Includes rack helm, 90° bezel, bezel kit, steering cable with stainless steel output end. Steering wheel and link-arm kits sold separately. Boat Type: Virtually all power assisted stern drive boats . Turns Lock-to-Lock: Four . Dimensions: 6 1/2"D from dash front, 28 1/2"W .
Part No: SS14109
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->Marine Premium Filler
Make sure your boat starts every time! Two-component vinylester filler for cosmetic repairs and fairing above and below the waterline. Cream hardener included. Formulation: Two-part vinylester filling/fairing compound. Recommended Usage: Filling blister damage, keel/rudder damage, cracks, gouges; fairing applications. Features: Contains microspheres for sandability. Used above/below water line. Drying: 10 min.
Part No: 46006
|
|
|
|
Home -> Navigation -> Compasses & Navigation Tools -> Surface Mount Compasses->Helmsman Compasses
Big compass performance and style that fits today’s most popular boats, Helmsman compasses feature high-impact, fiberglass-reinforced components with a matte finish. Accuracy and dependability are assured with sapphire jewels and tempered carbon steel pivots. PowerDamp (flat cards) and CombiDamp (direct reading cards) have lightweight baffles that eliminate spinning and dial jumping to make the Helmsman easy to read, even at high speeds. Apparent Card Dia. : 3-3/4" . Clinometer: No .
Part No: HF-743W
|
|
|
|
Home -> Fishing -> Reels->Saltist Saltwater Conventional Reels
Built For Today’s Super Braids Introducing Daiwa’s new Saltist™, with the features and rugged “Full-Metal Jacket” construction demanded by today’s ultra-strong braided lines and mono. 9 to 1 retrieve or new ultra high speed 6. 4 to 1 retrieve models that rip in over 47 inches of line with every crank, just the ticket for Kingfish. Features: Rugged, all-metal construction with rigid, one-piece aluminum frame . Super Drag . Up to 30% greater winding power . Powerful, high-strength alloy gears .
Part No: STT40H
|
|
|
|
|
Home -> Engine Systems -> Steering Systems->The Rack™ Stern Drive Rack and Pinion Steering System
Great for inflatables, bass boats, jet boats and small cruisers with a small space behind the dash. Uses a machine cut pinion gear, which engages a pre-assembled rack and cable with armor-stranded core. Includes rack helm, 90° bezel, bezel kit, steering cable with stainless steel output end. Steering wheel and link-arm kits sold separately. Boat Type: Virtually all power assisted stern drive boats . Turns Lock-to-Lock: Four . Dimensions: 6 1/2"D from dash front, 28 1/2"W .
Part No: SS14112
|
|
|
|
Custom designed by the best net man in the business. Designed to fully open . 3/8˝ nylon hand line . Additional premium braille lines . Double selvage mesh at leadline . Additional weight added to sink faster . Tied with extra strong bonded thread at leadline.
Part No: 21-10
|
|
|
|
|
Home -> Engine Systems -> Steering Systems -> Steering Kits->The Rack™ Stern Drive Rack and Pinion Steering System
Great for inflatables, bass boats, jet boats and small cruisers with a small space behind the dash. Uses a machine cut pinion gear, which engages a pre-assembled rack and cable with armor-stranded core. Includes rack helm, 90° bezel, bezel kit, steering cable with stainless steel output end. Steering wheel and link-arm kits sold separately. Boat Type: Virtually all power assisted stern drive boats . Turns Lock-to-Lock: Four . Dimensions: 6 1/2"D from dash front, 28 1/2"W .
Part No: SS14111
|
|
|
|
Home -> Engine Systems -> Steering Systems -> Steering Kits->Safe-T® Quick Stern Drive Rotary Steering System
Rotary three-turn steering kit with a quick connect cable set up to cut down on installation time. This system works on most boats with power steering assist, inboards and small outboards under 50hp where NFB isn't required. Boat Type: Virtually all power-assisted outboard, stern drive, and inboard boats . Steering Type: Rotary . Turns Lock-to-Lock: 3 . Dimensions: 4-7/8"D behind dash front x 6-7/8"W x 5-5/16"H . Steering Wheel: Up to 16". Not included .
Part No: SS13711
|
|
|
|
Home -> Electronics -> Antennas, Mounts, Cable->Destackers
Destackers for use with KVH DIRECTV HDTV.
Part No: 19-0347
|
|
|
|
Home -> Engine Systems -> Control Systems->KE-4 Electronic Remote Control System
This longlasting control has been extensively tested, and performs well in excess of a typical mechanical system. Features fail-safe operation, self-diagnosis system, control head with built-in station select switch, neutral warm up provision, optional mechanical backup, overload protection. Use one control unit and one actuator for single engine boats with up to four pilot stations. Use two control units for two engine boats with up to four stations. Call 1-800-BOATING for more information.
Part No: NM0616-24
|
|
|
|
|
Home -> Engine Systems -> Steering Systems->Safe-T® Quick Stern Drive Rotary Steering System
Rotary three-turn steering kit with a quick connect cable set up to cut down on installation time. This system works on most boats with power steering assist, inboards and small outboards under 50hp where NFB isn't required. Boat Type: Virtually all power-assisted outboard, stern drive, and inboard boats . Steering Type: Rotary . Turns Lock-to-Lock: 3 . Dimensions: 4-7/8"D behind dash front x 6-7/8"W x 5-5/16"H . Steering Wheel: Up to 16". Not included .
Part No: SS13720
|
|
|
|
Home -> Plumbing -> Marine Sanitation -> Treatment Sys/hldng Tnks->Holding Tanks
1520) requirements. Standard Tanks feature a multiple port arrangement that enables use as a sanitation holding tank or for potable water storage. They include two 1 1/2" fill/drain ports and two 1/2" vent/supply ports. Designed for waste storage, each includes two 1 1/2" ports for inlet and drain and one 1/2" vent port. Both Standard and Heavy-Duty Tanks feature threaded NPT ports that are molded in to eliminate stress cracks and leaks. One year warranty.
Part No: 85-1525WH
|
|
|
|
Home -> Engine Systems -> Engine Lubrication -> Oil Absorbents->Petroleum Sorbents
Absorb spilled oil before it pollutesSorbents help contain and control potentially dangerous spills of oil and gasoline, but repel water. They go to work immediately so there's less exposure to you and others and less risk to the environment. For use in "oil only" (hydrophobic) applications. T-156 and HP-156 absorb . 25 gal. per pad. HP-256 absorbs . 50gal. per pad.
Part No: HP-156
|
|
|
|
Home -> Shoes & Boots -> Leather Boat Shoes -> Men's Leather Boat Shoes->Men's Gold Cup Billfish 3-Eye Boat Mocs
Vibram non-marking rubber outsole with Wave Siping Cushion midsole and full length, triple-density footbed with memory foam Genuine deerskin lining.
Part No: TAN/BEIGE-11 1/2
|
|
|
|
|
Home -> Engine Systems -> Steering Systems->Safe-T® Quick Stern Drive Rotary Steering System
Rotary three-turn steering kit with a quick connect cable set up to cut down on installation time. This system works on most boats with power steering assist, inboards and small outboards under 50hp where NFB isn't required. Boat Type: Virtually all power-assisted outboard, stern drive, and inboard boats . Steering Type: Rotary . Turns Lock-to-Lock: 3 . Dimensions: 4-7/8"D behind dash front x 6-7/8"W x 5-5/16"H . Steering Wheel: Up to 16". Not included .
Part No: SS13712
|
|
|
|
|
Home -> Engine Systems -> Steering Systems -> Steering Kits->The Rack™ Stern Drive Rack and Pinion Steering System
Great for inflatables, bass boats, jet boats and small cruisers with a small space behind the dash. Uses a machine cut pinion gear, which engages a pre-assembled rack and cable with armor-stranded core. Includes rack helm, 90° bezel, bezel kit, steering cable with stainless steel output end. Steering wheel and link-arm kits sold separately. Boat Type: Virtually all power assisted stern drive boats . Turns Lock-to-Lock: Four . Dimensions: 6 1/2"D from dash front, 28 1/2"W .
Part No: SS14119
|
|
|
|
Home -> Fishing -> Reels -> Conventional Reels->Tekota Levelwind Reel
Engineered to provide comfort, convenience and rugged durability at a very attractive price. The Tekota series features die-cast aluminum frames, comfortable oversized Septon non-slip handles, reliable star drags, oversized clicker knobs and a smooth levelwind mechanism. Material: Die-cast aluminum . Drag: Precision Click Star . Ball Bearings: 3BB, 1 Roller . Handle: Right Hand . Features: Super-Stopper anti-reverse, oversized clicker button, Septon non-slip handle, counterbalanced handle .
Part No: TEK-600
|
|
|
|
|
Home -> Engine Systems -> Steering Systems->Safe-T® Quick Stern Drive Rotary Steering System
Rotary three-turn steering kit with a quick connect cable set up to cut down on installation time. This system works on most boats with power steering assist, inboards and small outboards under 50hp where NFB isn't required. Boat Type: Virtually all power-assisted outboard, stern drive, and inboard boats . Steering Type: Rotary . Turns Lock-to-Lock: 3 . Dimensions: 4-7/8"D behind dash front x 6-7/8"W x 5-5/16"H . Steering Wheel: Up to 16". Not included .
Part No: SS13714
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Thinners & Solvents
Awlgrip 1010 Flattening Agent for Urethane Topcoats Gallon.
Part No: OG3013/1GLUS
|
|
|
|
Home -> Anchor & Docking -> Windlasses & Rollers->Deluxe Chainstoppers
Chainstoppers stop the chain and take the load off the windlass. They are used to set and ride on the anchor, break free the anchor or to prevent accidental free fall of the anchor while under way.
Part No: P102211
|
|
|
|
|
Home -> Engine Systems -> Steering Systems -> Steering Kits->Safe-T® Quick Stern Drive Rotary Steering System
Rotary three-turn steering kit with a quick connect cable set up to cut down on installation time. This system works on most boats with power steering assist, inboards and small outboards under 50hp where NFB isn't required. Boat Type: Virtually all power-assisted outboard, stern drive, and inboard boats . Steering Type: Rotary . Turns Lock-to-Lock: 3 . Dimensions: 4-7/8"D behind dash front x 6-7/8"W x 5-5/16"H . Steering Wheel: Up to 16". Not included .
Part No: SS13710
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Fenders->Tuff End™ Round Fenders
Tough enough to meet the punishing demands of the commercial marine industry Tuff End buoys feature heavy duty seamless construction to meet the punishing demands of the commercial marine industry. The curved design hole prevents chafing. Compressor or football needle valve inflation. Made from thick-walled marine grade vinyl for durability. Injection molded ends for high strength. Trivalve™ for easy inflation with football needle or compressor. Great for larger boats or rafting! .
Part No: 1155
|
|
|
|
|
Home -> Engine Systems -> Steering Systems->Safe-T® Quick Stern Drive Rotary Steering System
Rotary three-turn steering kit with a quick connect cable set up to cut down on installation time. This system works on most boats with power steering assist, inboards and small outboards under 50hp where NFB isn't required. Boat Type: Virtually all power-assisted outboard, stern drive, and inboard boats . Steering Type: Rotary . Turns Lock-to-Lock: 3 . Dimensions: 4-7/8"D behind dash front x 6-7/8"W x 5-5/16"H . Steering Wheel: Up to 16". Not included .
Part No: SS13716
|
|
|
|
Home -> Seating & Covers -> Seating->Pro Series Sliders Seat, ABYC Pro 2.875in
Designed for larger helm seats, these heavy-duty sliders are built tough for added strength and durability. They feature strong Celcon bearings and are CNC machined to exact standards. Positive locking spring-loaded pin for secure connection of slider to pedestal. Stainless steel handle with vinyl grip. Comply with the highest ABYC standards. Slider top plate is 8 1/4"W x 13 1/4"L.
Part No: 20-2012
|
|
|
|
Home -> Cabin & Galley -> Refrigeration & Coolers
Our most affordable ice box conversion systems! Cooling volumes up to approx. 3. 5 cu. ft. with 2" of insulation/4. 5 cu. ft. with 3" of insulation. Provides a freezer compartment for ice making. Dimensions: 10. 03"L (255mm) x 8.
Part No: VD-07
|
|
|
|
|
Home -> Engine Systems -> Steering Systems->The Rack™ Stern Drive Rack and Pinion Steering System
Great for inflatables, bass boats, jet boats and small cruisers with a small space behind the dash. Uses a machine cut pinion gear, which engages a pre-assembled rack and cable with armor-stranded core. Includes rack helm, 90° bezel, bezel kit, steering cable with stainless steel output end. Steering wheel and link-arm kits sold separately. Boat Type: Virtually all power assisted stern drive boats . Turns Lock-to-Lock: Four . Dimensions: 6 1/2"D from dash front, 28 1/2"W .
Part No: SS14120
|
|
|
|
|
Home -> Engine Systems -> Steering Systems -> Steering Kits->The Rack™ Stern Drive Rack and Pinion Steering System
Great for inflatables, bass boats, jet boats and small cruisers with a small space behind the dash. Uses a machine cut pinion gear, which engages a pre-assembled rack and cable with armor-stranded core. Includes rack helm, 90° bezel, bezel kit, steering cable with stainless steel output end. Steering wheel and link-arm kits sold separately. Boat Type: Virtually all power assisted stern drive boats . Turns Lock-to-Lock: Four . Dimensions: 6 1/2"D from dash front, 28 1/2"W .
Part No: SS14115
|
|
|
|
|
Home -> Shoes & Boots -> Leather Boat Shoes -> Men's Leather Boat Shoes->Men's Gold Cup Billfish 3-Eye Boat Mocs
Vibram non-marking rubber outsole with Wave Siping Cushion midsole and full length, triple-density footbed with memory foam Genuine deerskin lining.
Part No: TAN/BEIGE-8
|
|
|
|
Materials: Stainless steel, phosphor bronze, acetal, glass, reinforced polyproplene, nitrile rubber - High quality ABS plastic. 38mm (1 1/2") inleVoutlet Lightweight Can be mounted in various orientations/positions Large non choke valves Tough plastic housing keeps in nasty smells Easy to clean (no tools required) 56 litres (14 3/4 US gals) per minute Maximum lift: 4. 5m (15ft) Maximum head: 4. 5m (15ft) Weight: 1. 4lbs) Hose bore: 38mm (1½") Service kit: AK8050 Lift=1m (3ft) Head=0.
Part No: BP0535
|
|
|
|
|
Home -> Engine Systems -> Steering Systems->Safe-T® Quick Stern Drive Rotary Steering System
Rotary three-turn steering kit with a quick connect cable set up to cut down on installation time. This system works on most boats with power steering assist, inboards and small outboards under 50hp where NFB isn't required. Boat Type: Virtually all power-assisted outboard, stern drive, and inboard boats . Steering Type: Rotary . Turns Lock-to-Lock: 3 . Dimensions: 4-7/8"D behind dash front x 6-7/8"W x 5-5/16"H . Steering Wheel: Up to 16". Not included .
Part No: SS13709
|
|
|
