Top Sellers
Hatch Riser Arm for 20" x 20" Hatch from TAYLOR
Replacement arms for Taylor hatches from 1987 to the present. Universal arms can be left or right.
|
|
|
Fishing Boat Cover - HS Blue 15'5"-16'4"/65" Beam from TAYLOR
Patterned to fit basic fishing boats with bench seats. (These covers are not patterned to fit over trolling motors. ) The bow and transom corners are reinforced to protect the cover from sharp aluminum edges. Poly Cotton Fabric: Trailerable 65% polyethelyne/35% cotton Breathable Mildew & Stain Resistant Water Repellant Heavy-gauge shock cord in hem 2-year limited warranty Color: Silver Gray. Hot Shot Fabric (HS): Trailerable 100% urethane-coated polyester 7.
|
T-Top Boat Cover, Center-Line Length 20'5" to 21'4", Blue from TAYLOR
The main features of these covers are: Bow and stern sections are separated into two halves. The sections are joined through the use of a 7mm single pull molded nylon zipper on both the port and starboard sides. Cover design incorporates a "console tube" section with two adjustable straps which lift and secure the cover halves up and over the console body and up under the T-top. The top edge of console tube incorporates an adjustable draw rope in both front and rear sections.
|
T-Top Boat Cover, Center-Line Length 19'5" to 20'4", Blue from TAYLOR
The main features of these covers are: Bow and stern sections are separated into two halves. The sections are joined through the use of a 7mm single pull molded nylon zipper on both the port and starboard sides. Cover design incorporates a "console tube" section with two adjustable straps which lift and secure the cover halves up and over the console body and up under the T-top. The top edge of console tube incorporates an adjustable draw rope in both front and rear sections.
|
Fleece Fender Cover, Fits Fenders 10" x 26", Black from TAYLOR
Perfect for use with Big B and other center-tube style fenders, these 100% polyester fleece covers will provide posh protection for your boat! Made of rugged, 12-ounce Blizzard fleece, they are UV- light and tear-resistant. The draw string hem enables adjustment for a snug fit and also permits removal for washing.
|
Back-to-Back Lounge Chair Seat Cover, 22"H x 50"W x 22"D from TAYLOR
Breathable rip/stop polyester fabric plus air vents provide optimum protection and ventilation for your seats, especially in hot and humid climates. Polyurethane coating on the inside prevents color transfer or bleed-through . Comes with drawstring hem . Available for most popular seat styles .
|
84”L Fiberglass Bow from TAYLOR
Bows moounted in bow sockets are the sure and easy way to keep a boat cover taut and free from water-collecting pockets. Sockets can be mounted on any rail system or anywhere on deck wall. Rubber gasket provides snug fit for fiberglass bows. Super strong and flexible, will not take a “set”. Cut to desired length. Incude rubber end covers to grab socket.
|
Replacement Gas Strut, 12" Compressed x 20" Extended Length, 40lb. Rating from TAYLOR
Reliable gas struts incorporate a strong annealed steel rod with a special coating for added corrosion resistance. Recommended by the manufacturer for use as dock box lid supports or hatch supports. Where use as a hatch cover support is desired, we recommend you base your selection upon the recommendation of the hatch manufacturer.
|
Adjustable Lock from TAYLOR
Three-part system provides easy snap-on/snap-off fender attachment and adjustment. A stainless base mounts to your boat, into which a peg snaps to hold the fender strap (sold separately). Fixed peg requires tying a knot to secure the fender at the desired height. Adjustable peg - adjust fender height by simply pulling on the strap. Max.
|
Welcome Aboard Mat, Navy, 18" X 30" from TAYLOR
High-quality, marine-grade mats will add spice to any deck or door. Made from plush carpet that is waterproof, stain- and fade-resistant. Mats are mold- and mildew-resistant and feature a nonskid rubber backing.
|
Sully Stick Winter Mooring Buoy from TAYLOR
Extend the life of your mooring with our ice-proof stickUse this long tapered buoy in place of a standard round buoy during winter months to help prevent ice entrapment and extend the life of the mooring by protecting it from the damaging effects of freezing temperatures. Molded in eyelet at the top allows for easy retrieval and the base eyelet is reinforced with galvanized metal brushing to attach a rope and connect to the anchor chain. 80"L x 6" Dia.
|
Medium Edging, White, 25' Coil, 3-1/2"H x 1-1/2"W from TAYLOR
Prevent scuffing when you dock Vinyl dock guard is specially formulated for softness and durability to protect your boat or dinghy. Each piece installs easily with screws or nails to the edge of docks, piers and floats. Material: Extruded PVC . Attachment Method: Stainless steel dock nails . Shock Absorption Mechanism: Flexible PVC .
|
Single Deck Chair Cover, 24"H x 24"W x 22"D from TAYLOR
Protect your seats from the elements!Heavy-duty waterproof poly/vinyl blend keeps your seats from cracking and fading. Poly/vinyl blend is softer and more pliable than traditional vinyl.
|
Fender Pump from TAYLOR
Compact, high-pressure hand pump for filling fenders, rafts, footballs, etc.
|
|
from SIERRA, Black from TAYLOR, Blue from TAYLOR, Burgundy from TAYLOR
|
|
Home -> Paint & Maintenance -> Winterizing & Storage->All Deck Boat Cover
Combines the simplicity of conventional boat cover installation with the tight fit and durability of our premium shrinkwrap.
Part No: SC-WA200ED
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting->1127-Series Red & Green Side Lights
Black plastic Pre-wired double-contact socket and 3 feet of 16/3-SO cable Watertight access cap for rebulbing and cleaning Bulb: 12, 24, 32 or 120 Volt (not included) Screw Size: 1/4" Height Overall: 7-1/2" Height Lens: 4-1/2".
Part No: 1127GA0BLK
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Electrical Eng Parts->Converter Kits
Designed to replace points and condensers for true solid state ignition. . In 1997, we added a 4 cylinder Prestolite kit (18-5295) to fit many Onan, Universal, Waukesha, & Wisconsin applications. These kits provide an affordable option when replacing a mechanical ignition system with solid state performance. Conversion kits are easy to install. Accurate to within 1/4 degree timing 0 to 6000 RPM. Six kits available to fit all major marine engines .
Part No: 18-5295
|
|
|
|
Home -> Electrical -> Shore Power -> Adapters, Plugs & Outlets->Shore Power Pigtail Adapters
Short jumper cord for wet locations Water-resistant adapters are fully molded, include sealing covers, and look like very short shore power cordsets. Recommended for use in wet locations. Pigtail adapters allow you to connect from one dockside receptacle (or other power source receptacle) to one boatside inlet or equipment of dissimilar power configuration. All components are covered by Marinco’s five-year warranty.
Part No: 121A
|
|
|
|
Home -> Engine Systems -> Engine Parts
Fits 6 cylinder Delco distributors for: Chris Craft. Chrysler Inboard . Crusader. Pleasurecraft. Mercruiser. OMC Sterndrive/Cobra.
Part No: 18-5294
|
|
|
|
Home -> Seating & Covers -> Covers & Biminis->AnchorShade™ Tops
AnchorShade is a lightweight and versatile alternative to an expensive, permanent custom top, and provides plenty of cool comfort, even on the hottest days. AnchorShade features a water-repellent, mildew- and fade-resistant polyester fabric top with adjustable nylon straps at the four corners, and an adjustable powder-coated steel pole and frame for support in the middle. Easy to set up and remove.
Part No: 22000
|
|
|
|
Home -> Seating & Covers -> Covers & Biminis->Anchorshade II
Long been known for quality marine products, Taylor Made Products has Reinvented the highly successful AnchorShade. Based on feedback from boaters all over the world; several important design changes are being introduced. 375" diameter solid fiberglass. These innovations are sure to keep your Anchorshade looking and working well, for years to come! Adjustable pole locks in place up to 8'. Lightweight, mildew/fade resistant UV-treated nylon top which blocks out 85-90% of harmful rays.
Part No: 22038
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks->Floating Dock Lifting Ladders
D. pipe made from marine grade aluminum 6063 T-5 to resist corrosion All welded construction for strength Floating Dock Lifting Ladder stores upright completely out of the water New double-rung locking mechanism results in the sturdiest lifting ladder in the industry Extruded aluminum channels are serrated to produce a non-skid surface rung with no sharp edges Rated for 665 lbs.
Part No: FL-5
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Made from marine grade cross-linked polyethylene for light weight and durability, all tanks are USCG, NMMA and ABYC compliant. Mechanically vented cap floats, and is easy to grip, with ribbed design. Tank includes 90° 1/4"NPT Moeller patented “Poplock” aluminum withdrawal elbow. It swivels 360° without losing its seal. Injection molded 2 1/4" fill neck with gauge and vent. 43"L x 15"W x 7. 87"H.
Part No: 031818
|
|
|
|
|
Home -> Seating & Covers -> Covers & Biminis->Anchorshade II
Long been known for quality marine products, Taylor Made Products has Reinvented the highly successful AnchorShade. Based on feedback from boaters all over the world; several important design changes are being introduced. 375" diameter solid fiberglass. These innovations are sure to keep your Anchorshade looking and working well, for years to come! Adjustable pole locks in place up to 8'. Lightweight, mildew/fade resistant UV-treated nylon top which blocks out 85-90% of harmful rays.
Part No: 22039
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks
Attaches permanently to your pontoon's port or starboard side gate. Swings horizontally from its brackets, then up or down into position quickly. Durable, double-walled 1" dia. anodized aluminum tubing is coated to help prevent saltwater corrosion and weathering. Anodized aluminum folding standoffs have cushioned tips Includes stainless steel mounting hardware and fold-up securing strap Measures 36"H from mounting brackets to the bottom step Made in U. S. A.
Part No: 19250:01
|
|
|
|
|
Home -> Seating & Covers -> Covers & Biminis->Anchorshade II
Long been known for quality marine products, Taylor Made Products has Reinvented the highly successful AnchorShade. Based on feedback from boaters all over the world; several important design changes are being introduced. 375" diameter solid fiberglass. These innovations are sure to keep your Anchorshade looking and working well, for years to come! Adjustable pole locks in place up to 8'. Lightweight, mildew/fade resistant UV-treated nylon top which blocks out 85-90% of harmful rays.
Part No: 22034
|
|
|
|
Home -> Engine Systems -> Steering Systems -> Hydraulic Steering->Relief Valves
Intended to protect the system’s components and assist in purging air.
Part No: MSV-19
|
|
|
|
Home -> Clothing Accessories -> Bags
The 3-in-1 Harken Rolling Carry-On is a backpack, wheeled bag, and a handy carry-on all in the same smart pack. Detachable daypack with laptop sleeve and S-shaped shoulder straps. Embroidery friendly. Padded backpack straps stow behind main compartment’s zippered back panel. Zippered accessory pocket, two water-bottle pockets, and a back strap allow pack to slip over the main bag’s extended handle. 4" laptop sleeve. Quick-clip buckle at top of removable daypack attaches to main bag.
Part No: 2261
|
|
|
|
Home -> Ventilation -> Bilge Blowers->Par Marine Blowers
Designed to remove gasoline vapors from enclosures, these blowers are also a medium-duty, versatile means of exhausting warm air from galleys and engine rooms, ventilating odors or steam from heads and general marine air circulation. Constructed of a tough reinforced plastic housing . One-piece balanced plastic rotor f. Maximum corrosion-resistance in marine environments.
Part No: 34739-0020
|
|
|
|
|
Home -> Seating & Covers -> Covers & Biminis->Anchorshade II
Long been known for quality marine products, Taylor Made Products has Reinvented the highly successful AnchorShade. Based on feedback from boaters all over the world; several important design changes are being introduced. 375" diameter solid fiberglass. These innovations are sure to keep your Anchorshade looking and working well, for years to come! Adjustable pole locks in place up to 8'. Lightweight, mildew/fade resistant UV-treated nylon top which blocks out 85-90% of harmful rays.
Part No: 22035
|
|
|
|
Home -> Seating & Covers -> Tables
Stowable Table Pedestal for Smaller Boats Provides salon areas and pontoon decks with removable dinette tables. Engineered for marine use . Three piece, all-aluminum provides solid table base . Fluted profile stanchion with protective anodized finish . Quick stowage .
Part No: 75340:01
|
|
|
|
Home -> Seating & Covers -> Covers & Biminis->AnchorShade™ Tops
This unique 6' x 6' umbrella can be used on almost any vessel from small fishing boats to larger performance power and sailboats. Improved features include the same high-quality water-repellent, mildew- and fade-resistant nylon fabric, which now includes a "Market Style" fabric top that allows venting to occur without loss of sun protection. Nylon straps at the four corners adjust between 3' and 8'. 6'W x 6'L umbrella is a lightweight alternative to expensive, permanent custom tops.
Part No: 22001
|
|
|
|
|
Home -> Seating & Covers -> Covers & Biminis->Anchorshade II
Long been known for quality marine products, Taylor Made Products has Reinvented the highly successful AnchorShade. Based on feedback from boaters all over the world; several important design changes are being introduced. 375" diameter solid fiberglass. These innovations are sure to keep your Anchorshade looking and working well, for years to come! Adjustable pole locks in place up to 8'. Lightweight, mildew/fade resistant UV-treated nylon top which blocks out 85-90% of harmful rays.
Part No: 22036
|
|
|
|
Home -> Engine Systems -> Engine Parts
Fits most Mallory Y or YD and cylinder distributors with clockwise or counter clockwise rotations.
Part No: 18-5296-2D
|
|
|
|
|
Home -> Seating & Covers -> Covers & Biminis->Anchorshade II
Long been known for quality marine products, Taylor Made Products has Reinvented the highly successful AnchorShade. Based on feedback from boaters all over the world; several important design changes are being introduced. 375" diameter solid fiberglass. These innovations are sure to keep your Anchorshade looking and working well, for years to come! Adjustable pole locks in place up to 8'. Lightweight, mildew/fade resistant UV-treated nylon top which blocks out 85-90% of harmful rays.
Part No: 22037
|
|
|
|
|
Home -> Engine Systems -> Engine Parts->Converter Kits
Designed to replace points and condensers for true solid state ignition. . In 1997, we added a 4 cylinder Prestolite kit (18-5295) to fit many Onan, Universal, Waukesha, & Wisconsin applications. These kits provide an affordable option when replacing a mechanical ignition system with solid state performance. Conversion kits are easy to install. Accurate to within 1/4 degree timing 0 to 6000 RPM. Six kits available to fit all major marine engines .
Part No: 18-5297D
|
|
|
|
|
Home -> Seating & Covers -> Covers & Biminis->Anchorshade II
Long been known for quality marine products, Taylor Made Products has Reinvented the highly successful AnchorShade. Based on feedback from boaters all over the world; several important design changes are being introduced. 375" diameter solid fiberglass. These innovations are sure to keep your Anchorshade looking and working well, for years to come! Adjustable pole locks in place up to 8'. Lightweight, mildew/fade resistant UV-treated nylon top which blocks out 85-90% of harmful rays.
Part No: 22033
|
|
|
|
|
Home -> Paint & Maintenance -> Winterizing & Storage->All Deck Boat Cover
Combines the simplicity of conventional boat cover installation with the tight fit and durability of our premium shrinkwrap.
Part No: SC-E22D
|
|
|
|
Home -> Seating & Covers -> Seating->Millennium 2000 Seat Swivel/Slide System
The easy-to-use aluminum Mill 2000 system combines dual Quick-Lock handles, for stable, wobble-free support; a positive lock-action slide, with 6" fore-and-aft travel; and a swiveling spider, with 4-prong, 360° rotation, for smooth operation. Slider plate is 13 3/4" x 8" with a 5" x 12" mounting hole pattern. Use with 2 7/8"dia. fluted pedestals only, including the PosiPin-type that secures the stanchion at specific 1" increments with a spring-loaded pin.
Part No: 75528:01
|
|
|
|
Home -> Plumbing -> Fittings & Valves->ARG Series Raw Water Strainers
The first line of defense to your engine’s cooling system. Well-made traditional bronze strainer head. No leaks under pressure or vacuum. Cast mounting brackets. Mounting system allows removal of the strainer without tools. Buna-N “O-ring” seal at strainer cap.
Part No: ARG-1250-P
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Marine Alkyd 50, (Commercial/Industrial Only)
Marine Alkyd 50 - Commercial/Industrial Only Marine Alkyd 50 is a single component marine grade alkyd finish. High gloss and good color retention. Fast drying and good leveling characteristics. Good resistance to chemicals cleaners and abrasion. Specifically designed for Steel and for (select styles) aluminum ships.
Part No: 3004-5G
|
|
|
|
Home -> Engine Systems -> Trim Tabs & Hydrofoils -> Power Tilt/Trim->Tilt/Trim Motors, Outboard Applications
Tilt/Trim Motors, Outboard Applications.
Part No: 18-6759
|
|
|
|
|
Home -> Electrical -> Shore Power->Shore Power Pigtail Adapters
Short jumper cord for wet locations Water-resistant adapters are fully molded, include sealing covers, and look like very short shore power cordsets. Recommended for use in wet locations. Pigtail adapters allow you to connect from one dockside receptacle (or other power source receptacle) to one boatside inlet or equipment of dissimilar power configuration. All components are covered by Marinco’s five-year warranty.
Part No: 110A
|
|
|
|
Home -> Engine Systems -> Control Systems -> Control Cables->TFXtreme 6400 BC Performance Cables
TfXtreme's unique design assures smoothness and efficiency–with hardly any lost motion–even in the longest and most complex cable routings! This means superior feel at the control, in any boat–performance that had been considered "impossible". TfXtreme achieves the "impossible". Patent-pending splined core to achieves the impossible–easy movement and minimum lost motion.
Part No: CCX64008
|
|
|
