Top Sellers
Stern Rail Outboard Motor Mount - Aluminum for 1-1/4" Railings from EDSON CORPORATION
Built to hold motors up to 15 hp or 100 lbs/45 kg. Convenient cleat and side handles allow you to tie the motor and lock it safely on board. The non-corroding polished 316 stainless bracket with non-skid pad, bolted to the UV stable poly backing board always looks ship-shape… no more varnishing. Bottom cleat comes unattached so that it will fit any rail spacing. Note: 1-1/4” rail version comes complete with anodized aluminum bracket, stainless cleat and stainless U-bolt for 1-1/4” railing.
|
PE-1 Lexan Mast Pad Eye from FORESPAR
For use on our small poles. 1-3/4"H x 1-1/4" x 5/8"dia. ring. Same ring as supplied with 4-8 and 6-12 poles.
|
Rim Latch Sets - Reverse Bevel with Flush Strike from PERKO
Chrome-plated zinc. Sliding lock button. Case size: 2 1/8'' x 1 3/4''. Escutcheon Size: 4 3/8'' x 1 1/4''. For Door: 5/8'' to 1 3/8''.
|
Whale Swim 'N' Rinse Transom Shower from WHALE PUMPS
Whale Swim 'N' Rinse Transom Shower Add the convenience of a hot and cold shower to your transom. The easy-to-install shower connects directly to the Whale Quick Connect 15 mm freshwater system. Durable, ABS plastic housing with cover hides the shower when not in use. 7' retracting hose . Water conservation control on the handset . Base plate: 6-1/2" x 11-1/2" . Allow 3-1/2" behind surface .
|
Flush Cup Door Latch from PERKO
Chrome plated zinc alloy with sliding lock button. For door thickness 3/4 to 1-1/8 inches. Supplied with black plastic spacer for surface mounting. Bevel/Strike Type: Regular w/Box. Case Dimensions: 2-1/8 x 1-3/4 .
|
5/16" Wire Rope Clamp from SEADOG
Investment Cast 316 Stainless Body / AISI 304 Stainless U-Bolt. Accepts 5/16" wire. 1-5/8" Long. 1-3/8" wide.
|
Abandon Ship Dry Bag from WEST MARINE
Store critical safety and survival gear at the ready and keep it protected from wet conditions. Featuring a roll-top dry seal for complete waterproofness, this bag has plenty of room to keep essentials dry, such as a watermaker, EPIRB, instant meals and first aid supplies. Features lanyard, three internal pockets and elastic loops for flares. 30Ltr.
|
Stainless-Steel Compact Electric Horn - Double from AFI
Mini Twin Electric Horn Excellent for use in the marine environment. totally seal sound units have type 304 stainless cover, diaphragm and mounting brackets. Material: 304 stainless cover & horn diaphragm. Loudness dB: 106 dB. Approvals: ABYC for boats up to 20 meters. Dimensions: 3"L x 8"W x 1 3/4"H. Power Requirements: 12V. Draw: 3A @ 12V (max. 6A). Fundamental frequency: 490±20/440±20.
|
Medium Edging, White, 25' Coil, 3-1/2"H x 1-1/2"W from TAYLOR
Prevent scuffing when you dock Vinyl dock guard is specially formulated for softness and durability to protect your boat or dinghy. Each piece installs easily with screws or nails to the edge of docks, piers and floats. Material: Extruded PVC . Attachment Method: Stainless steel dock nails . Shock Absorption Mechanism: Flexible PVC .
|
Dielectric Silicone Compound from ANCOR MARINE
A silicone "grease" that's great for waterproofing coax connections, butt splices, and other sliding electrical connections. 1/3-oz.
|
Zinc Grouper Anode from CANADA METALS
Supplements your boat's existing anodes An excellent anodic device to supplement a vessel’s existing anode system, especially to counteract stray current from defective shore power. Clip to bolt on outdrive. Clip to grounding strap if possible or wire items together with copper wire and clip to wire. Do not connect to negative battery terminals. Dimensions: 8 1/4"L x 3 1/4"W x 1 3/8"D.
|
Electric Bilge Pump Installation Kit from ANCOR MARINE
Essential items for installing a bilge pump Convenient package includes four #8 x 3/4" stainless-steel panhead screws, one 1-3/4" x 3/4" stainless steel hose clamp, and three 16-14AWG heat shrink butt connectors.
|
3/16" Stock Dia. U-Bolt, 1-3/8” Thread Length, 1-3/16" Hole Spacing, 1" Eye Dia. from SEAFIT
Stainless steel U-Bolts have metric threads. The top plate is held in place by small ears that are forged into the U-bolt. Includes matching backing plate. ShWt .
|
Hose Adapter, From 1-1/8" to 3/4"-5/8" from RULE INDUSTRIES
#69 is stepped & adapts from 1-1/8" to 3/4" - 5/8" #57 is an elbow & adapts from 1-1/8" to 1" NPT #67 adapts from 1-1/2" to 1-1/8".
|
SeaStar Helm Seal Kit from TELEFLEX
Replacement shaft seal kit HS5176 fits various post-1990 SeaStar 1. 4, 1. 7 (I), 2. 0, 2. 4 (II), SeaStar Pro and SeaStar helms.
|
|
1-1, Dry-Seal Shaft Seal, 2-1, 1-3, 2" from LASDROP SHAFT SEALS
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-114-212
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-114-2
|
|
|
|
Home -> Foul Weather Gear & Jackets -> Foul Weather Gear -> Foul Weather Gear->Racing Pants
These Racing Pants are made of laminated nylon taslon, waterproof and breathable. Thermo-taped seams, elasticated net to ensure adhesion and comfort. One double pocket on the thigh with waterproof zip and one located higher up, which is thermo-welded. Knees and seat of pants reinforced with non-rip fabric. All stitching is thermo-taped. Sizes: XS - XXL. Thermo-taped seams The heat application of a special backing tape on fabrics offers total protection against water penetration along seams.
Part No: LIGHT GREY-2X
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-114-214
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks
Steps - Fold out and over, telescope down easily Compact stowage - Steps fold over flat on platform Flat poly treads for increased comfort Securing strap included Electropolished stainless steel Standard Folding Gudgeons 4 steps, L deployed: 45. 50" (116cm), L stowed: 15. 50" (40cm) Overall height 1. 75" (4cm), W 12" (30. 5cm), L of gudgeons 6.
Part No: 19617-61:01
|
|
|
|
Home -> Engine Systems -> Steering Systems -> Wheels And Steering Acc.
Classic Italian styling at an affordable price. Our Fantasy wheels feature modern styling that will enhance the look of any power boat. The 3/4" tapered hub fits most steering systems. Black aluminim spoke. Black polyurethane grip. Burlwood inserts. 13-3/4" Diameter.
Part No: PU011111
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-114-258
|
|
|
|
|
Home -> Foul Weather Gear & Jackets -> Foul Weather Gear -> Foul Weather Gear->Racing Pants
These Racing Pants are made of laminated nylon taslon, waterproof and breathable. Thermo-taped seams, elasticated net to ensure adhesion and comfort. One double pocket on the thigh with waterproof zip and one located higher up, which is thermo-welded. Knees and seat of pants reinforced with non-rip fabric. All stitching is thermo-taped. Sizes: XS - XXL. Thermo-taped seams The heat application of a special backing tape on fabrics offers total protection against water penetration along seams.
Part No: LIGHT GREY-S
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Fender Covers (A-Series, F-Series, HTM-Series & AERE)
Master Fender Covers are specially designed to protect the topsides and hull from fender scuff and reduce the need for expensive gel coat repairs. They are made from a premium stain resistant, non-abrasive, loop-knit acrylic fabric, which is both durable and fade resistant. The HTM-Series (Hole Through Middle) comes in singles or doubles which are also reversible; they fit Taylor Made Big B™ and SuperGard™ fenders.
Part No: MFC-F11N
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-138-238
|
|
|
|
|
Home -> Foul Weather Gear & Jackets -> Foul Weather Gear -> Foul Weather Gear->Racing Pants
These Racing Pants are made of laminated nylon taslon, waterproof and breathable. Thermo-taped seams, elasticated net to ensure adhesion and comfort. One double pocket on the thigh with waterproof zip and one located higher up, which is thermo-welded. Knees and seat of pants reinforced with non-rip fabric. All stitching is thermo-taped. Sizes: XS - XXL. Thermo-taped seams The heat application of a special backing tape on fabrics offers total protection against water penetration along seams.
Part No: LIGHT GREY-M
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-118-3
|
|
|
|
|
Home -> Foul Weather Gear & Jackets -> Foul Weather Gear -> Foul Weather Gear->Racing Pants
These Racing Pants are made of laminated nylon taslon, waterproof and breathable. Thermo-taped seams, elasticated net to ensure adhesion and comfort. One double pocket on the thigh with waterproof zip and one located higher up, which is thermo-welded. Knees and seat of pants reinforced with non-rip fabric. All stitching is thermo-taped. Sizes: XS - XXL. Thermo-taped seams The heat application of a special backing tape on fabrics offers total protection against water penetration along seams.
Part No: LIGHT GREY-XL
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-138-234
|
|
|
|
|
Home -> Foul Weather Gear & Jackets -> Foul Weather Gear -> Foul Weather Gear->Racing Pants
These Racing Pants are made of laminated nylon taslon, waterproof and breathable. Thermo-taped seams, elasticated net to ensure adhesion and comfort. One double pocket on the thigh with waterproof zip and one located higher up, which is thermo-welded. Knees and seat of pants reinforced with non-rip fabric. All stitching is thermo-taped. Sizes: XS - XXL. Thermo-taped seams The heat application of a special backing tape on fabrics offers total protection against water penetration along seams.
Part No: LIGHT GREY-XS
|
|
|
|
Home -> Foul Weather Gear & Jackets -> Jackets & Fleece -> Jackets & Fleece->Coastal Softshell Jacket
Waterproof breathable weather protection. Features: 3 zippered pockets. Fleece-lined collar.
Part No: WHITE-L
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-138-214
|
|
|
|
|
Home -> Foul Weather Gear & Jackets -> Foul Weather Gear -> Foul Weather Gear->Racing Pants
These Racing Pants are made of laminated nylon taslon, waterproof and breathable. Thermo-taped seams, elasticated net to ensure adhesion and comfort. One double pocket on the thigh with waterproof zip and one located higher up, which is thermo-welded. Knees and seat of pants reinforced with non-rip fabric. All stitching is thermo-taped. Sizes: XS - XXL. Thermo-taped seams The heat application of a special backing tape on fabrics offers total protection against water penetration along seams.
Part No: LIGHT GREY-L
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-114-238
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-114-134
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting->Aluminum Light Covers with LED Lights
High efficiency LED light strips are housed in an aluminum housing and are waterproof (not to be submerged).
Part No: 88981
|
|
|
|
|
Home -> Foul Weather Gear & Jackets -> Jackets & Fleece -> Jackets & Fleece->Coastal Softshell Jacket
Waterproof breathable weather protection. Features: 3 zippered pockets. Fleece-lined collar.
Part No: WHITE-XL
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains
**Screw-LwrUnitDrain/Fill(50)|**Screw-LwrUnitDrain/Fill(50).
Part No: 18-23871-9
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-138-2
|
|
|
|
|
Home -> Foul Weather Gear & Jackets -> Jackets & Fleece -> Jackets & Fleece->Coastal Softshell Jacket
Waterproof breathable weather protection. Features: 3 zippered pockets. Fleece-lined collar.
Part No: WHITE-M
|
|
|
|
|
Home -> Foul Weather Gear & Jackets -> Jackets & Fleece->Coastal Softshell Jacket
Waterproof breathable weather protection. Features: 3 zippered pockets. Fleece-lined collar.
Part No: WHITE-S
|
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting->Aluminum Light Covers with LED Lights
High efficiency LED light strips are housed in an aluminum housing and are waterproof (not to be submerged).
Part No: 88980
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Fender Covers (A-Series, F-Series, HTM-Series & AERE)
Master Fender Covers are specially designed to protect the topsides and hull from fender scuff and reduce the need for expensive gel coat repairs. They are made from a premium stain resistant, non-abrasive, loop-knit acrylic fabric, which is both durable and fade resistant. The HTM-Series (Hole Through Middle) comes in singles or doubles which are also reversible; they fit Taylor Made Big B™ and SuperGard™ fenders.
Part No: MFC-A6B
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-118-212
|
|
|
|
Home -> Cabin & Galley -> Appliances & Cookware -> Appliances
6 cubic foot SpaceSaver microwave oven has features just like full-size microwave ovens. This microwave ovens features digital, interactive touchpad offers a choice of 10 power levels to prepare anything from a cup of coffee to a frozen dinner. The eight touch menus provide the perfect microwaving time and temp for potatoes, pizzas, popcorn, beverages, soups, dinner plates, fresh vegetables and frozen vegetables. Measures 17" W x 10 1/8" H x 12 3/4" D Unit weight 27 Lbs.
Part No: CM7060S
|
|
|
