Top Sellers
Johnson/Evinrude Outboard Starter, 120 to 140hp V4 (1985-99), 10 tooth drive gear from SIERRA
Sierra's new and remanufactured starters are the only marine starters that meet Marine UL standards. Sierra's remanufactured starters all have new solenoids, drives, bushings, brushes and springs. The bodies are powder coated for greater corrosion resistance. Sierra has entered an agreement with United Technologies to market their complete line of outboard starters and components. All are 100% load tested . Our remanufactured starters are covered by Sierra's customer satisfaction warranty .
|
Replaces OMC P/N 378444 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
For Chrysler/Force, 89-817109A2 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
Water Circulating Pump - #18-3581 - Chrysler Inbd # 3004886, 3619542, 3619859, 3745985 from SIERRA
Water Pumps The water pump is the heart of your inboard or I/O cooling system. All Sierra pumps are bidirectional and can be installed on reverse rotation engines. The pumps are also powder coated for additional protection. Includes mounting gasket. Pumps include brass bi-directional impellers, brass plugs and fittings, carbon resin seal, all mounting gaskets, stainless steel seal cup and spring, stainless steel back plate (where required), and powder coating for maximum corrosion protection.
|
10 Micron Replacement Filter Element for OMC 502905 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. Today’s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage.
|
10 Micron Replacement Filter Element for Mercury 35-807172/35/35-802893Q, Yamaha ABB-FUELF-IL-TR (Short) from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. Today’s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage.
|
Aqua View Element Only, Mercury Replacement Element, Replaces Racor S3213 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. Today’s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage.
|
30GPH Cartridge, Replaces Racor S3240 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
|
Sierra-Tube-Exhaust from SIERRA
Some larger V-8 engines that create a large amount of back pressure use exhaust tubes rather than bellows. This helps to relieve the excessive pressure and eliminate problems with premature bellows failure. In the past, the exhaust bellows would blow up like a balloon and cause the drive shaft bellows to rub against the yoke and U-joints causing holes in the bellows.
|
|
|
|
|
Prop Nut Kit, Yamaha 40-50HP from SIERRA
An excellent emergency item to carry in your toolbox, for those occasions when the prop nut is misplaced or lost.
|
Prop Nut Kit, Yamaha V4/V6 from SIERRA
An excellent emergency item to carry in your toolbox, for those occasions when the prop nut is misplaced or lost.
|
Exhaust Flapper Valve - 4" from SIERRA
Heavy duty rubber flapper valve keeps following seas from entering exhaust outlet when moving slowly or stopping.
|
|
|
|
Impeller from SIERRA, Bearing from SIERRA, Gear from SIERRA
|
|
The newest universal-fit boat covers from Taylor feature heavy-duty polyester fabric in two-tone colors for a unique look while fully capable of surviving the rigors of the road. Each cover includes a storage bag, tie-down straps and a support pole for a complete boat cover care system. 6. 5oz. polyester fabric with excellent mildew- and water-resistance.
Part No: 70901
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Flexible Couplings
Protect your boat's drive train with the Flexible Coupling. Fits between the transmission output flange and the shaft flange to absorb shock load s resulting from gear changes, or the propeller striking a submerged object. If the disc is destroyed from massive shock load, the metal compression straps keep the coupling intact, ensuring that the drive system is functional in both forward and reverse. The flexible disc is machined from resilient and durable polyurethane. Isolates the shaft.
Part No: 910-002
|
|
|
|
Home -> Plumbing -> Marine Sanitation -> Head Parts->Service Kits & Parts for Manual Heads
.
Part No: 37064-0000
|
|
|
|
Home -> Electrical -> Meters & Distribution -> Distribution Panels->360 Circuit Breaker Panel System
AC and DC panels feature an interchangeable modular design with open architecture and flexible layouts that eliminates custom engineering and metal fabrication. Flat rocker actuators have a modern appearance and protection against accidental switching. The AC Panels may be equipped with main breakers up to 100A per pole to suit the application. Large selection of 360 System panels are available by Special Order. Switch Type: Rocker . Lighting: LEDs on each circuit illuminate to indicate ON .
Part No: 1459
|
|
|
|
Home -> Plumbing -> Fittings & Valves -> Valves, Deck Fills, Misc.
Protect engine cooling systems, generators, air conditioners and marine toilets from debris. Clear plastic body makes checking flow easy. Nylon filter basket can be removed without tools. Includes a molded mounting bracket. Threaded 1-1/2" female inlet and outlet ports.
Part No: RWS
|
|
|
|
Home -> Electrical -> Meters & Distribution->Water-Resistant DC Fuse Panels
Fuse panels have sealed Contura switches Water-resistant panels withstand rain, sea spray and hose spray washdown, and are designed for flybridge and open cockpit applications. Fuse holders are improved and easy to open. Voltage: 12/24V DC . Fuse/Switch Type: AGC and MDL 1-1/4" x 1/4" glass fuses; Contura switches . Waterproof: Rated IP66 “Use on Shipdecks” . Lighting: Embedded LED "ON" lights . Labels: Set of 60 common labels included . Approvals: USCG, ABYC .
Part No: 8053
|
|
|
|
Home -> Electronics -> Radars -> Radar Accessories->Radar Mast/Pole Mounts & Accessories
This application will fit most radomes and requires some assembly. Choose the top plate that fits your brand of antenna (each top accepts LTB option): Raymarine top plate (Model 5436290) Universal* top plate (Model 5436308) Garmin top plate (Model 6966022) . Choose secondary support: Two 48" stainless-steel struts with brackets and hardware (Model 5436324) One 48" stainless-steel strut and one rail stand-off for 1" rail and mounting hardware (Model 5436316).
Part No: RM-3G-TOP
|
|
|
|
100 Amp 125/250 Volt Male Plug.
Part No: 100HM1
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Big Boat Track & Accessories
Harken’s Big Boat Traveler Track is available in low-beam and high-beam configurations.
Part No: 3155.2.1M
|
|
|
|
Home -> Cordage -> Rigging Products->Backstay Insulators/Antennas
Turn your backstay into an antenna! For your steel wire backstay to serve as an SSB or ham radio antenna, it must be electrically isolated at both ends. Swage end fittings are made from Type 316 stainless steel. For peak radio performance the stainless steel end terminals are insulated from the anodized aluminum body with a special Acetal spacer. The large external webs of the spacer help to minimize power leakage, a problem with conventional insulators particularly when wet.
Part No: RF3628-12
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> Mainsheet Traveler->Small Boat Captive Ball (CB) Traveler Cars
These lightweight, solid aluminum and compact captive ball (CB) travelers are built to handle very high loads. Captive ball bearings let you roll the cars on and off the track without using a ball loader. Boat Size: Dinghies, multihulls, to small offshore boats. Material: One-piece solid aluminum . Shackle: Pivoting toggle models—fasten control blocks directly to post without needing a shackle. Sheave: Fixed sheave models—mainsheet loads 40° or less from vertical.
Part No: 2735
|
|
|
|
Home -> Cordage -> Rigging Products
Turn your backstay into an antenna! For your steel wire backstay to serve as an SSB or ham radio antenna, it must be electrically isolated at both ends. Swage end fittings are made from Type 316 stainless steel. For peak radio performance the stainless steel end terminals are insulated from the anodized aluminum body with a special Acetal spacer. The large external webs of the spacer help to minimize power leakage, a problem with conventional insulators particularly when wet.
|
|
|
|
Home -> Cordage -> Rigging Products->Backstay Insulators/Antennas
Turn your backstay into an antenna! For your steel wire backstay to serve as an SSB or ham radio antenna, it must be electrically isolated at both ends. Swage end fittings are made from Type 316 stainless steel. For peak radio performance the stainless steel end terminals are insulated from the anodized aluminum body with a special Acetal spacer. The large external webs of the spacer help to minimize power leakage, a problem with conventional insulators particularly when wet.
Part No: RF3628-10
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Starter-Outboard|**Starter-Outboard.
Part No: 18-5627
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Midrange Traveler Track & Accessories
Midrange track is available in low-beam or high-beam configurations. Use high-beam track to span a cockpit or other unsupported area. Choose between variable hole spacing and drilled track. Holes in metric drilled track are on 100mm centers. Use 1/4” (6mm) FHMS fasteners. End stops sold separately. Add 1522 or 1523 Heavy Duty End Stops (sold in pairs, fasteners not included) when end control assemblies are not used. Low-beam track measures 9/16" (14mm)H x 1 1/16" (27mm)W.
Part No: 1618.1.8M
|
|
|
|
Home -> Sailboat -> Blocks
An easily adjustable, two-position, spring-loaded pin stop allows this car to be fixed in place or travel freely on ultra low-friction plastic car slides. Made of lightweight and corrosion-resistant black anodized aluminum. Sheave dia. : 1-1/4" x 1-1/2"W for one or two sheets up to 5/8"dia. . SWL: 3,300lb. .
Part No: RC73231
|
|
|
|
Home -> Electronics -> VHF Radios & Communications -> VHF Accessories->GVM400 Cables
GVM400 Video and Audio Cables.
Part No: R08274
|
|
|
|
Home -> Engine Systems -> Engine Parts
**SwitchBox|**SwitchBox.
Part No: 18-5778
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains
**Gear-Reverse|**Gear-Reverse.
Part No: 18-2219
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains
**Clutch|**Clutch.
Part No: 18-1565
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Electronic Conversion Kit|**Electronic Conversion Kit.
Part No: 18-5293-1
|
|
|
|
Home -> Electronics -> Boat Instruments->DVI-D or VGA Interconnect Cable
DVI-D Interconnect Cable. 5 meters long. Connects the DVI-D output of your computer or satellite television receiver to the DVI-D input on Raymarine M1500, G170 and G190 Marine Displays. VGA interconnect cable. 5 meters.
Part No: E06022
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Tool-DriveShaft Preload|**Tool-DriveShaft Preload.
Part No: 18-9874
|
|
|
|
Home -> Sailboat -> Rigging Products->Hi-MOD Compression Studs
These slim Hi-MOD compression fittings are at least as strong as the rated breaking load of the rigging wire, and they work equally well with right/left hand lay wire. " The shallow angled cone establishes direct mechanical grip on the wire's core and all the outer strands. Constructed from 316 stainless steel, with aluminum/bronze crown rings, they can be taken apart for maintenance and re-used without the need for new parts (provided that no overloading has occurred).
Part No: 34CTS12
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> Mainsheet Traveler->Small Boat Captive Ball (CB) Traveler Cars
These lightweight, solid aluminum and compact captive ball (CB) travelers are built to handle very high loads. Captive ball bearings let you roll the cars on and off the track without using a ball loader. Boat Size: Dinghies, multihulls, to small offshore boats. Material: One-piece solid aluminum . Shackle: Pivoting toggle models—fasten control blocks directly to post without needing a shackle. Sheave: Fixed sheave models—mainsheet loads 40° or less from vertical.
Part No: 2736
|
|
|
|
Home -> Clothing Accessories -> Hats, Watches, & Accessories
Men's chronograph watch Big and bold, this watch feature large 1-7/8"dia. dials and chronograph movements with date, countdown and stopwatch functions. Five year warranty. Brushed and polished stainless steel case with blue dial.
Part No: N14555G
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Impeller (10)|**Impeller (10).
Part No: 18-3017-10
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains
**Bearing-Carrier|**Bearing-Carrier.
Part No: 18-2376
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains
**Bearing-Carrier|**Bearing-Carrier.
Part No: 18-2370
|
|
|
|
Home -> Engine Systems -> Engine Parts
**TriggerAssy|**TriggerAssy.
Part No: 18-5798
|
|
|