Top Sellers
Hatch Riser Arm for 20" x 20" Hatch from TAYLOR
Replacement arms for Taylor hatches from 1987 to the present. Universal arms can be left or right.
|
|
|
Fishing Boat Cover - HS Blue 15'5"-16'4"/65" Beam from TAYLOR
Patterned to fit basic fishing boats with bench seats. (These covers are not patterned to fit over trolling motors. ) The bow and transom corners are reinforced to protect the cover from sharp aluminum edges. Poly Cotton Fabric: Trailerable 65% polyethelyne/35% cotton Breathable Mildew & Stain Resistant Water Repellant Heavy-gauge shock cord in hem 2-year limited warranty Color: Silver Gray. Hot Shot Fabric (HS): Trailerable 100% urethane-coated polyester 7.
|
T-Top Boat Cover, Center-Line Length 20'5" to 21'4", Blue from TAYLOR
The main features of these covers are: Bow and stern sections are separated into two halves. The sections are joined through the use of a 7mm single pull molded nylon zipper on both the port and starboard sides. Cover design incorporates a "console tube" section with two adjustable straps which lift and secure the cover halves up and over the console body and up under the T-top. The top edge of console tube incorporates an adjustable draw rope in both front and rear sections.
|
T-Top Boat Cover, Center-Line Length 19'5" to 20'4", Blue from TAYLOR
The main features of these covers are: Bow and stern sections are separated into two halves. The sections are joined through the use of a 7mm single pull molded nylon zipper on both the port and starboard sides. Cover design incorporates a "console tube" section with two adjustable straps which lift and secure the cover halves up and over the console body and up under the T-top. The top edge of console tube incorporates an adjustable draw rope in both front and rear sections.
|
Back-to-Back Lounge Chair Seat Cover, 22"H x 50"W x 22"D from TAYLOR
Breathable rip/stop polyester fabric plus air vents provide optimum protection and ventilation for your seats, especially in hot and humid climates. Polyurethane coating on the inside prevents color transfer or bleed-through . Comes with drawstring hem . Available for most popular seat styles .
|
84”L Fiberglass Bow from TAYLOR
Bows moounted in bow sockets are the sure and easy way to keep a boat cover taut and free from water-collecting pockets. Sockets can be mounted on any rail system or anywhere on deck wall. Rubber gasket provides snug fit for fiberglass bows. Super strong and flexible, will not take a “set”. Cut to desired length. Incude rubber end covers to grab socket.
|
Replacement Gas Strut, 12" Compressed x 20" Extended Length, 40lb. Rating from TAYLOR
Reliable gas struts incorporate a strong annealed steel rod with a special coating for added corrosion resistance. Recommended by the manufacturer for use as dock box lid supports or hatch supports. Where use as a hatch cover support is desired, we recommend you base your selection upon the recommendation of the hatch manufacturer.
|
Adjustable Lock from TAYLOR
Three-part system provides easy snap-on/snap-off fender attachment and adjustment. A stainless base mounts to your boat, into which a peg snaps to hold the fender strap (sold separately). Fixed peg requires tying a knot to secure the fender at the desired height. Adjustable peg - adjust fender height by simply pulling on the strap. Max.
|
Welcome Aboard Mat, Navy, 18" X 30" from TAYLOR
High-quality, marine-grade mats will add spice to any deck or door. Made from plush carpet that is waterproof, stain- and fade-resistant. Mats are mold- and mildew-resistant and feature a nonskid rubber backing.
|
Sully Stick Winter Mooring Buoy from TAYLOR
Extend the life of your mooring with our ice-proof stickUse this long tapered buoy in place of a standard round buoy during winter months to help prevent ice entrapment and extend the life of the mooring by protecting it from the damaging effects of freezing temperatures. Molded in eyelet at the top allows for easy retrieval and the base eyelet is reinforced with galvanized metal brushing to attach a rope and connect to the anchor chain. 80"L x 6" Dia.
|
Medium Edging, White, 25' Coil, 3-1/2"H x 1-1/2"W from TAYLOR
Prevent scuffing when you dock Vinyl dock guard is specially formulated for softness and durability to protect your boat or dinghy. Each piece installs easily with screws or nails to the edge of docks, piers and floats. Material: Extruded PVC . Attachment Method: Stainless steel dock nails . Shock Absorption Mechanism: Flexible PVC .
|
Single Deck Chair Cover, 24"H x 24"W x 22"D from TAYLOR
Protect your seats from the elements!Heavy-duty waterproof poly/vinyl blend keeps your seats from cracking and fading. Poly/vinyl blend is softer and more pliable than traditional vinyl.
|
Fender Pump from TAYLOR
Compact, high-pressure hand pump for filling fenders, rafts, footballs, etc.
|
|
|
|
from LEWMAR, 1200 from TAYLOR, Blue from TAYLOR, Flotation from TAYLOR
|
|
Home -> Plumbing -> Freshwater Systems -> Freshwater Pumps->Paragon Jr. Pressure Water Pump
Paragon Jr. Pressure Water System The Paragon Jr. can handle the demands of multiple outlets, either as a saltwater washdown or freshwater system pump. Includes a 12V bronze rotary pump, pressure gauge, strainer and PST-1 accumulator tank. Solid-state dry-tank shutoff Operates between 20 and 40psi For boats to 45' 7 GPM Draw: 30A starting, 26A running Self Prime: 6' Dimensions: 12"L x 7"H x 8"dia. (pump) 12"L x 8"dia.
Part No: IPS-38
|
|
|
|
Home -> Seating & Covers -> Seating->Cape Cod Helm Seat
Cape Cod Seat America's #1 Saltwater Seat. A favorite among discriminating boaters for years, this classic seat affords good looks and extreme comfort. Redesigned cushion set makes this classic even better. Rugged, Roto-molded polyethylene construction and self-draining seat ensure its durability . Chair offered with or without cushions, which snap off for easy cleaning or storage . 21-1/2”H x 25”W x 18-1/2”D. White .
Part No: 85-1556
|
|
|
|
Home -> Watersports -> PWC Parts & Accessories -> PWC Accessories->Personal Watercraft Covers
Hot Shot, 100% polyester with acrylic coating sheds water, prevents mold and rot and remains breathable. Draw rope with lock-in hem for easy cinching. Tiedown loops are sewn in. Includes belly strap. Gray and White.
Part No: 70425
|
|
|
|
Home -> Fishing -> Fishing Accessories -> Fishing Belts->Fighting Belt Harness
Ideal for fighting mid-sized, 30-60 lb. game fish, this heavily-constructed stand-up harness disperses pressure at the reel across the mid and lower back--relieving strain on you and your equipment, while increasing fighting power. Includes D-rings for use with the drop straps on your fighting belt. Back and kidney support keeps you on top of the big fish. Quality built.
Part No: 30550
|
|
|
|
Aluminum alloy sheave and dual Torlon® ball bearing races for higher working loads. Sheave: Anodized aluminum alloy . Ball Bearings: Torlon® Sheave Size: 2 3/8" (60mm) . Line Dia. : 7/16" max. . Cheek Material/Finish: Anodized aluminum alloy .
Part No: 29901614
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting->602 Series LED Side Lights
Pair of high-visibility LED side lights is certified for use on powerboats up to 20m (or 65. 6') with 12V electrical systems. Lights feature long lasting 12V LED bulbs rated at 100,000 hours and use 1/10 of the energy draw of standard lights. 2nm visibility range. Water resistant. Meet USCG and ABYC standards. Sold in pairs. Case Material: Chrome-plated bronze or black plastic. Case Dimensions: 3-1/2"L x 2-1/4"W x 7/8"H" . Mounting Hardware: #8 FHMS . Volts: 12V .
Part No: 0602DP1CHR
|
|
|
|
Home -> Sailboat -> Tiller & Rudder->Laminated Replacement Tillers
Replace that old ugly tiller with a new hand-made laminated ash and mahogany wood tiller, made to fit your rudder hardware, and pre-finished with multiple coats of premium marine spar varnish. Choose the right length and profile, and the butt-end measurements to fit your rudderhead hardware. Can’t find a good fit? Idasailor Marine can custom-build a tiller to your measurements . Custom tillers are shipped direct within 10 days . Click HERE to open the PDF custom order form.
Part No: 2300
|
|
|
|
Home -> Anchor & Docking -> Windlasses & Rollers->Windlass Handheld Remote Controls
Imtra offers the latest in handheld remote controls from Quick™ Compact and watertight, these multi-purpose controls are manufactured using only the highest quality materials and components. Available in 2-, 4-, 6- or 8-function models, with or without an integrated LED lamp. Each is supplied with marine plug, socket and cover, stowage bracket, and 7' spiral cord. Universal power supply (12 or 24V DC).
Part No: SPA-HRC1002W
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Forged Snap Shackles
Highest quality drop-forged 17-4 PH stainless-steel shackles are beautifully polished, with smooth contours. Great strength and reliability.
Part No: 2478
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Fixed Shank Scoop Anchors->Supreme Anchors
The sharp spear point digs right in, penetrates deeply and sets rapidly, and the dual operation shank has two slots for easy retrieval in different seabed conditions: Long slot for rock and coral, or short slot for sand, mud, weed and grass. Choose galvanized steel for maximum strength or polished stainless steel. Roll bar for self-righting resets Cons: Can be expensive depending what size and material you choose Style: Fixed shank "scoop" plow. Material: High-tensile steel.
Part No: SUP10
|
|
|
|
|
Home -> Watersports -> PWC Parts & Accessories -> PWC Accessories->Personal Watercraft Covers
Hot Shot, 100% polyester with acrylic coating sheds water, prevents mold and rot and remains breathable. Draw rope with lock-in hem for easy cinching. Tiedown loops are sewn in. Includes belly strap. Gray and White.
Part No: 70436
|
|
|
|
|
Home -> Watersports -> PWC Parts & Accessories -> PWC Accessories->Personal Watercraft Covers
Hot Shot, 100% polyester with acrylic coating sheds water, prevents mold and rot and remains breathable. Draw rope with lock-in hem for easy cinching. Tiedown loops are sewn in. Includes belly strap. Gray and White.
Part No: 70421
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Rotomolded Float Drums
Constructed from a seamless polyethylene shell filled with low-density EPS foam. The shell is infused with UV inhibitors and has a minimum wall thickness of 0. 15". Unaffected by saltwater, gasoline, oil and most chemicals. Flat top has a flange with eight 1/2" holes for fasteners. Freeboard depends on how heavily the float is loaded—typically, floats are submerged about 4" on an unloaded dock.
Part No: 46118
|
|
![Sherwood Service Kit from JABSCO]( "Sherwood Service Kit from JABSCO")
|
|
Home -> Engine Systems -> Engine Parts
Fits Sherwood model G-5 for chrysler engines LM 318, LM 340, LM 360, LM 383, LM 400.
Part No: 90184-0001
|
|
|
|
|
Home -> Watersports -> PWC Parts & Accessories -> PWC Accessories->Personal Watercraft Covers
Hot Shot, 100% polyester with acrylic coating sheds water, prevents mold and rot and remains breathable. Draw rope with lock-in hem for easy cinching. Tiedown loops are sewn in. Includes belly strap. Gray and White.
Part No: 70426
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyestraps, Fairleads, Bails->Toe Rail Pad Eyes
Designed to protect toerails from damage by spreading the load applied by snap shackles and snatch blocks. Unscrewing the unit partially allows it to slide quickly from hole to hole; unscrewing it entirely permits removal. Articulates through 150°. Drop-forged stainless with silicone insert. 9/16"dia. eye. Toerails must be at least 1-9/16"H with a 5/16"–1/2"dia. lip. Fits symmetric or asymmetric toe rails.
Part No: 16614
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Full-Flow Flanged Bronze Seacocks
Components include 316 stainless steel, full-flow ball, PTFE seals and seats, all bronze castings and a patented reversing handle that facilitates installation and use in cramped locations. Includes bonding wire attachment and drain plug on each side of body. Top fitting is NPT and bottom is NPS.
Part No: BV-1000
|
|
|
|
|
Home -> Watersports -> PWC Parts & Accessories -> PWC Accessories->Personal Watercraft Covers
Hot Shot, 100% polyester with acrylic coating sheds water, prevents mold and rot and remains breathable. Draw rope with lock-in hem for easy cinching. Tiedown loops are sewn in. Includes belly strap. Gray and White.
Part No: 70427
|
|
|
|
Home -> Boats & Motors -> Inflatable Boats->West Marine / Avon / Zodiac Inflatables Accessories
West Marine/Avon /Zodiac Inflatable Accessories.
Part No: N63935
|
|
|
|
Home -> Paint & Maintenance -> Cleaners, Soaps & Polishes->Imperial Compound & Finishing Material
Removes sanding scratches—for machine applicationAn exceptionally fast-cutting liquid compound and finishing material designed to remove sanding scratches. Leaves an excellent finish without swirl marks. Use with a compound pad.
Part No: 06045
|
|
|
|
Home -> Anchor & Docking -> Anchors -> River/Lake Anchors->Collapsible Box Anchor
Recommended for protected waters or beach use, this anchor’s unique shape enables it to set in most bottom types with half the rode normally needed for conventional anchors. Its fixed scoop design and narrow side panels set like a “cookie cutter” into sand, mud, grass or rock. A stabilizing bar and spring make it easy to lock the anchor open for use or collapse it for storage. Stainless-steel version is cast and polished 304 stainless. Style: Box . Material: Galvanized steel/stainless steel.
Part No: SBA
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers->Boat & Trailer Tires & Rims - Bias Ply, Spoke Rims
Boat and camper tires take a real pounding on the road and long periods of storage can cause deterioration. These affordable replacement tires meet Department of Transportation Standards. Tires beginning with ST are special trailer tires with stiffer sidewalls to improve trailer stability and reduce sway. Select bias ply with galvanized, painted or chrome rims, spoked or solid, in a variety of sizes. For heavier loads and/or trailers used over long distances, we recommend radial tires.
Part No: 16585
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports -> Ports->Self-Drain Opening Ports
For mounting where installation is within 15° of vertical. Angled drainage ramp molded on 1" spigot promotes drainage without having to make angled cuts in the hull. The ports can then be thru-bolted, which is impossible to do in windows where an angled spigot extends below the bolt holes. Constructed of strong ABS plastic with clear Lexan windows. Trim rings and screens are included. Beckson’s patented cam latches secure the window. Material: ABS plastic with clear Lexan windows .
Part No: PO512-WC-10
|
|
|
|
|
Home -> Watersports -> PWC Parts & Accessories -> PWC Accessories->Personal Watercraft Covers
Hot Shot, 100% polyester with acrylic coating sheds water, prevents mold and rot and remains breathable. Draw rope with lock-in hem for easy cinching. Tiedown loops are sewn in. Includes belly strap. Gray and White.
Part No: 70431
|
|
|
|
|
Home -> Watersports -> PWC Parts & Accessories -> PWC Accessories->Personal Watercraft Covers
Hot Shot, 100% polyester with acrylic coating sheds water, prevents mold and rot and remains breathable. Draw rope with lock-in hem for easy cinching. Tiedown loops are sewn in. Includes belly strap. Gray and White.
Part No: 70432
|
|
|
|
|
Home -> Sailboat -> Tiller & Rudder->Laminated Replacement Tillers
Replace that old ugly tiller with a new hand-made laminated ash and mahogany wood tiller, made to fit your rudder hardware, and pre-finished with multiple coats of premium marine spar varnish. Choose the right length and profile, and the butt-end measurements to fit your rudderhead hardware. Can’t find a good fit? Idasailor Marine can custom-build a tiller to your measurements . Custom tillers are shipped direct within 10 days . Click HERE to open the PDF custom order form.
Part No: 2600
|
|
|
|
Home -> Interior, Flags & Gifts -> Clocks, Barometers, & Lamps->Endurance Instruments
Endurance instruments will always look like new, even after long-term exposure to the elements. They never need polishing or refinishing. Not only do these instruments hold up to harsh weather, they also feature a Slide ‘n Lock Mounting System that lets you lock in, or remove, each instrument easily from its special mounting plate to make adjustments or store it. Now, you won’t have to unscrew it from the bulkhead every time you need to replace the batteries. Bezel: Fixed .
Part No: 530300
|
|
|
|
Home -> Ventilation -> Bilge Blowers->12V Marine Blowers
This allows a very neat installation on an engine room bulkhead. Flexmount Blowers are also of radial design but are installed by attaching a mounting collar around the motor (which is supplied with the blower) to any convenient solid surface. They can be rotated inside the collar to allow the shortest ducting lengths and most convenient routings in confined spaces. Approvals: USCG, ISO 8846/9097 . Universal flexmount bracket lets outlet face any direction; corrosion-resistant construction .
Part No: 35400-0000
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyestraps, Fairleads, Bails->Toe Rail Pad Eyes
Designed to protect toerails from damage by spreading the load applied by snap shackles and snatch blocks. Unscrewing the unit partially allows it to slide quickly from hole to hole; unscrewing it entirely permits removal. Articulates through 150°. Drop-forged stainless with silicone insert. 9/16"dia. eye. Toerails must be at least 1-9/16"H with a 5/16"–1/2"dia. lip. Fits symmetric or asymmetric toe rails.
Part No: 16613
|
|
|
|
Home -> Cabinet & Deck Hardware -> Deck Plates & Storage->"Slimline Tackle Boxes"
Flush storage compartments hold two and three lidded Plano® drawers and feature sturdy "Slimline" styled doors with integrated heavy-duty hinges and hidden fasteners. Made of acrylic capped ABS. .
Part No: 45310000
|
|
|
