Top Sellers
29mm Carbo Clew Block Assembly from HARKEN
From the folks who invented ball bearing blocks, this line of blocks boasts an excellent strength-to-weight ratio. 29mm doubles and triples feature a U-lock to hold the swivel in the front or side position, or allow it to spin freely. Use the 40mm blocks for jib and mainsheet systems on high-performance dinghies, and for high-load control lines on small keelboats. The 57mm blocks have an enormous working range that makes them ideal for main and jib sheets, spinnaker halyards and control lines.
|
Impeller, 18-3062 from SIERRA
Recommended replacement schedule is every 3 years for fresh water and every year for salt water Click to view a Sierra Impeller Application Chart (PDF) For further assistance, have your year & model information handy and call our Product Advisors at 1-800-BOATING.
|
|
|
Inflatable Boat Ladder from GARELICK
Contoured to hug the hull of inflatable boats. Attaches to floorboard or side with 3/8'' line and heavy-duty swivel snap. 1'' dia. anodized aluminum tubing with plastic rungs. Vinyl sleeves protect hull fabric.
|
Folding Dock/Raft ladder 3 step from GARELICK
Unique flip-up hinge mechanismUnique hinged ladder flips up and out of the water to prevent marine growth. Features a 10° angle for effortless boarding. Quick-release pins make it easy to remove for storage. 16"W steps have anodized aluminum tread and a curved step to make boarding more comfortable. Overall ladder width is 18". One-year warranty. Wide track 18"W ladder with full width 16" steps. Anodized aluminum heavy-walled 1"dia. tube construction.
|
CARB GASKET KIT from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Yamaha Carb Kit from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Replaces OMC P/N 378444 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
For Chrysler/Force, 89-817109A2 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
Auxiliary Outboard Bracket, 9-1/2" Vertical Lift, 7.5hp-30hp HP Rating from GARELICK
Built extra-tough and extra-wide for secondary engines including new higher-torque, four-stroke engines. Stainless torsion springs for easy lifting. Mounting board is 2" weatherproof and maintenance-free polypropylene. Five-position lock bar allows for better range trim adjustment. Maximum Weight: Model #193328: 169 lbs. , Model # 3683455: 175 lbs. . Style: Adjustable . Material: Anodized aluminum body w/ poly-propylene board . Attachment Method: Thru-bolt, backing plate .
|
Gunwale Mount Pontoon Ladder, 4 Step from GARELICK
For use on pontoon boat side gates. Special vinyl sleeves between the first and second step protect the pontoon from damage. The overrail hooks snap into amounting sockets (included) suitable for temporary or permanent mounting. Made of durable 1''dia. aluminum tubing with comfortable white molded plastic steps. Hooks fold flat for compact storage. Four steps. 50''L. Hooks:13.
|
2'' Trnsm Ladder Extension Shim from GARELICK
Extends ladder farther off the transom. Use with spacer and face plate included with ladder.
|
Adjustable Height Standard Friction Lock Pedestal Seat, Ribbed Series from GARELICK
Seat raises or lowers, locks at desired height . 2-7/8" (7cm) diameter stanchion tube, 9" (23cm) diameter base plate . Anodized protective finish helps prevent saltwater corrosion and weathering. . 2-7/8" (7cm) diameter ribbed stanchion tube, 9.
|
Fold-Down Transom Ladder from GARELICK
Great for boats with small transoms. Includes a unique bracket for attaching to most angled or curved transoms in an area only 12"W x 6. 5"H. Both steps fold down for boarding.
|
Ladder Storage Mounting Bracket from GARELICK
For storing ladder on side coaming or transom. Identical to brackets included with each ladder.
|
|
from HARKEN, 3, 24" from GARELICK, 3stp from GARELICK, GM from SIERRA
|
|
Home -> Seating & Covers -> Tables
19-3/4" 7-1/4" Single Taper Powder Coat Silver Aluminum.
Part No: Z20-3160PCS60MM
|
|
|
|
Home -> Sailboat -> Tiller & Rudder -> Tillers Extensions & Ac->Lightning Sticks Tiller Extensions
Holt worked with members of the British National 470 Sailint Team to develop what may be the most lightweight and versatile tiller extensions ever! Soft, light foam grip around thicker diameter makes it easy to hold on to when the action unfolds fast!.
Part No: HA5508-13
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks->Footrest/Steps
Heavy-duty aluminum footrest adjusts 5" vertically to provide added comfort for multiple users at helm. Angled 18° downward for more comfort when resting. Traction-grooved step surface with teak inserts has rounded design that helps to eliminate corner collisions. Bolts to boat.
Part No: 27516:01
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Electrical Eng Parts
Replaces mercury 91-99750A1. Tests electrical and ignition systems.
Part No: 18-9801
|
|
|
|
Home -> Electrical -> Chargers & Inverters
Smart controller watches over your battery charger Conveniently control the charging of auxiliary or starter batteries from an inverter/charger or other source without overcharging. Automatically switches On/Off to charge a starter battery without affecting the main battery bank. Application: Charges auxiliary or starting batteries from inverter/charger with limited voltage drop . Features: Automatically switches on and off without affecting the battery bank or overcharging. . Dimensions: 5.
Part No: 82-0123-01
|
|
|
|
Home -> Fishing -> Rods->Aerial Rods
Lightweight, responsive rods features rugged graphite blanks, with Pac Bay AFTCO guides and a roller tip. Soft, durable EVA grips provide outstanding comfort during long battles Type: Stand-up . Blank: Premium graphite . Guides: Pac Bay . Reel Seat: Pac Bay . Grip: EVA Foam .
Part No: 1272-0289
|
|
|
|
|**Steamball #10 SH,3/8 In Cab.
Part No: B03810S
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->U-Joints
U-Joints connect the drive shaft from the engine to the drive unit and allow the drive to trim and tilt. Most U-joints come with grease fittings and should be lubricated annually. Style 18-2097 comes with a synthetic lubricant and does not need annual service.
Part No: 18-1711
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cleats & Chocks -> Chocks And Bitts
A classic, beautiful way to make large lines fast to your vessel. Top-of-the-line stainless steel with a pre-drilled stainless backing plate . 8'' x 4. 5'' x 7. 25''H. .
Part No: 4514SS
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Dock Bumpers->EPDM Rubber Dock Guards
Protect your boat and dock with this new line of EPDM rubber dock edging. EPDM rubber is designed to withstand the most extreme environments and is soft enough to cushion your boat from the dock or pier. It’s softer than vinyl and stays flexible when exposed to UV, offering uncompromising longevity. Choose from five different profiles for protection where you need it most. Attachment Method: Stainless steel dock nails (sold separately). Shock Absorption Mechanism: EPDM Rubber.
Part No: 96036
|
|
|
|
Home -> Engine Systems -> Engine Parts
For GM (V-6) 231, 262 Replaces Mercruiser 41141A2, 860277A1, OMC 509408.
Part No: 18-7284
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Snap Shackles->Snap Shackles
S. -made shackles offer race-ready high performance, one-handed operation and they can be snapped open under load. Large bail size ideal for additional sheets, spinnakers and other multi-line applications. They have a breaking strength of 5,000 lbs and weigh just 2. 2 ounces in the standard bail configuration. Ideal for J-24s, Mumm 30s and similar boats. Tylaska T8 Snap Shackles are perfect for applications requiring high strength and low weight. 5 ounces in the standard bail configuration.
Part No: T8 STD BAIL
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting->Underwater Lights
Powerful, long-lasting underwater lights Sturdy and powerful Aqua Lights™ underwater lights are constructed with the highest quality materials— heavy-duty naval bronze housings made with extremely thick walls and borosilicate glass lenses—for decades of performance. The Mega Blaster delivers a dazzling 180000 lumens from its huge 600 watt Metal Halide bulb, protected by 1/2"-thick lens. 5A of 120V AC power (you'll need an inverter). Halogen and Xenon bulbs operate for 600 to 900 hours.
Part No: AL35H
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers->Trailer Tires & Wheels
Boat and camper tires take a real pounding on the road and long periods of storage can cause deterioration. These affordable replacement tires meet Department of Transportation Standards. Tires beginning with ST are special trailer tires with stiffer sidewalls to improve trailer stability and reduce sway. Select bias ply with galvanized, painted or chrome rims, spoked or solid, in a variety of sizes. For heavier loads and/or trailers used over long distances, we recommend radial tires.
Part No: 16578
|
|
|
|
Home -> Seating & Covers -> Tables->Quick Release Table Pedestal System
Revolutionary new table hardware system features a deck ring mount, that mounts flush with your deck so cutting a large center hole is not required. It's easy to use and install—the deck ring mounts nearly flush with deck for minimal interference when table is stowed. Quick release levers allow effortless take down of table for storage. Marine grade polymer components resist corrosion.
Part No: 75649:01
|
|
|
|
Home -> Safety -> Flares & Signaling Devices
Automatically produces brilliant strobe flashes when thrown overboard. Used with a 6V alkaline lantern battery (not included), the rugged WL-1 flashes at the required USCG rate for more than 52 hours.
Part No: 205102
|
|
|
|
Home -> Safety -> PLBs, EPIRBs, Life Rafts, Survival -> PLBs & EPIRBs
The ACR HydroFix™ HRU has an expiration date of 2 years from the date of installation or 3 years from the date manufactured, whichever comes first. Upon installing your beacon or new HRU, permanently scratch the new expiration date on the HRU date calendar. When replacing the HRU, ACR requires that you do not reuse any parts from the previous HRU. Failure to replace the entire assembly can cause the bracket to malfunction. Always use original ACR replacement parts (Replacement kit P/N 9490).
Part No: 9490
|
|
|
|
|
**Thrd. Stud, 1/2-20, 3/8 Cab. |**Thrd.
Part No: S038012
|
|
|
|
Super Pro™ Series Designed to fully open . 3/8˝ nylon hand line . Additional premium braille lines . Double selvage mesh at leadline . Additional weight added to sink faster . Tied with extra strong bonded thread at leadline.
Part No: 24-6
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->U-2965 Brushing Thinner Solvent
Used to reduce high build and finish primers, gloss topcoats and U-1000.
Part No: U-2965 GAL
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->545 Anti-Corrosive Epoxy Primer, (Professional Application Only)
For steel, aluminum, wood or fiberglass. Spray, brush, roll on. Covers up to 497 sq. ft. /gal. Recoat in 12 hours. NOTE: Awlgrip is intended for professional application only and is not available for sale to retail customers.
Part No: OD3001/1GLUS
|
|
|
|
Home -> Sailboat -> Tiller & Rudder -> Rudder & Wheel Hdwr->Wheel Storage Kit
Holds your wheel securely out of the way when you need more space in the cockpit. A Delrin® shaft bearing accepts the wheel, and a flip-down toggle holds it securely. Cast stainless clamp mounts on any 1" or 1-1/4" railing or stanchion. Includes Quick Release nut. Fits straight 1" wheel hub.
Part No: 683-1S
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Standard T-Track
.
Part No: 40-68
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks -> Ladders & Ramps
Store your ladder "invisibly" under the transom platform or swim deck. This one slides open and angles outward into the water for stairlike climbing.
Part No: 19523:01
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Big Boat Track & Accessories
Harken’s Big Boat Traveler Track is available in low-beam and high-beam configurations.
Part No: 3156.1.2M
|
|
|
|
Home -> Sailboat -> Downwind Poles & Cars -> Pole End Fittings & Tub->Ultra Series Spinnaker Pole Ends
Lightweight and durable, these composite fittings weigh significantly less than metal fittings. Available with either external or internal trip. Included trip line is lightweight Spectra. All lengths to fit standard poles.
Part No: 304062
|
|
|
|
Home -> Sailboat -> Blocks->ESP Blocks
Designed to handle the high loads generated by modern racing and cruising boats, ESP blocks feature axle bearings to ensure smooth, hitch-free performance under high load and heavy winds. Sheave: Long-glass engineered plastic, except lockoff: aluminum. Bearings: Contained-axle sleeve and carbon-black Torlon ball bearings. Sheave Size: 3" (76mm). Line Diameter: 3/4".
Part No: 6085
|
|
|
|
|
Home -> Sailboat -> Blocks->ESP Blocks
Designed to handle the high loads generated by modern racing and cruising boats, ESP blocks feature axle bearings to ensure smooth, hitch-free performance under high load and heavy winds. Sheave: Long-glass engineered plastic, except lockoff: aluminum. Bearings: Contained-axle sleeve and carbon-black Torlon ball bearings. Sheave Size: 3" (76mm). Line Diameter: 3/4".
Part No: 6068
|
|
|
|
Home -> Sailboat -> Blocks->57mm Carbo Ratchamatic Blocks
Control loaded lines with ease The 57mm and 75mm Carbo Ratchamatic blocks are adjustable for use in many applications and weather conditions. This load-sensing ratchet block rolls freely in both directions under low loads, then engages the ratchet automatically as loads increase. Great for asymmetrical spinnakers when you need tough holding power and a quick release. Sheave Size: 1-9/16" (40mm). Ball Bearings: Engineered plastic in fitted ball races. Line Diameter: 3/8" .
Part No: 2628
|
|
|
|
|
Home -> Sailboat -> Downwind Poles & Cars -> Pole End Fittings & Tub->Ultra Series Spinnaker Pole Ends
Lightweight and durable, these composite fittings weigh significantly less than metal fittings. Available with either external or internal trip. Included trip line is lightweight Spectra. All lengths to fit standard poles.
Part No: 304053
|
|
|
