Top Sellers
Waste Caddy from TODD ENTERPRISES
Todd Waste Caddy A portable 29-gal. capacity waste removal system. Moves easily on pneumatic tires with plastic bearings. Features a vented cap and 10-foot, 1-1/2"dia. hose and gravity-assisted pump that forces out fluid by gravity for a more rapid transfer. Spring-loaded nozzle eliminates leaks . Bronze ball valve is located at the bottom of the tank . Constructed of cross-linked polyethylene for strength and durability .
|
Gas Caddy from TODD ENTERPRISES
Move 28 gallons of Gas in our smooth-rolling caddy Store and transport fuel safely on docks or onboard. Gas Caddy holds 28 gallons of fuel. Includes 10' of UL Approved hose with static wire, molded hose brackets, UL Approved spring loaded nozzle, 3/4" UL Approved ball valve, aluminum non sparking axle, pneumatic tires with nylon bearings, nylon wheel hubs, vented cap and a molded-in baffle for strength & durability. All Caddies bear the UN Marking, “UN3H1W. ” Color-coded red.
|
Twist Shower, Cold Only from WHALE PUMPS
A refreshing departure from deck shower designs of the past, the innovative Twist offers simple operation in a space-saving, ergonomic design. Spray holes are located in the soft-body handle and a twist of the wrist is all you need to initiate water flow or mix hot with cold. Material: High-impact, glass-filled polypropylene and Nitrile . Dimensions: Side Mount: 4-3/4"dia. x 7-1/2"H (Requires 6"D clearance); Top Mount: 2-5/16"dia. x 7-1/2"D . 2' .
|
Medium Edging, White, 25' Coil, 3-1/2"H x 1-1/2"W from TAYLOR
Prevent scuffing when you dock Vinyl dock guard is specially formulated for softness and durability to protect your boat or dinghy. Each piece installs easily with screws or nails to the edge of docks, piers and floats. Material: Extruded PVC . Attachment Method: Stainless steel dock nails . Shock Absorption Mechanism: Flexible PVC .
|
Water Circulating Pump - #18-3599 - Volvo #3851982-3, 3853850; Mercruiser #811841, 850399, 850399-1 from SIERRA
Water Pumps The water pump is the heart of your inboard or I/O cooling system. All Sierra pumps are bidirectional and can be installed on reverse rotation engines. The pumps are also powder coated for additional protection. Includes mounting gasket. Pumps include brass bi-directional impellers, brass plugs and fittings, carbon resin seal, all mounting gaskets, stainless steel seal cup and spring, stainless steel back plate (where required), and powder coating for maximum corrosion protection.
|
|
|
Clamp-On Rod Holder - 1 1/4"ID Horizontal, Gold from WEST MARINE
Silver or gold tubes are anodized for long life in the marine environment. Fabricated from cold drawn aluminum with no unsightly weld seams. Available in aluminum schedule pipe sizes 3/4" thru 1 1/4" in horizontal and vertical models. If using stainless steel tube, please go down 1/4" in size. Type:Clamp on. # of Rods:One. Material:Aluminum. Lining:White vinyl. Diameter:Rod holder is 1 5/8" ID. Mount:Clamp on.
|
Hose Adapter, From 1-1/8" to 3/4"-5/8" from RULE INDUSTRIES
#69 is stepped & adapts from 1-1/8" to 3/4" - 5/8" #57 is an elbow & adapts from 1-1/8" to 1" NPT #67 adapts from 1-1/2" to 1-1/8".
|
Hatch - Ocean 60 Flat Base from LEWMAR
Well-engineered hatches with CE-certified quality materials and construction. Smoothly styled external hinge enables one-hand operation. Inside handles feature locks that cannot be forced from the outside. Flat base or 1'' flange base (pictured). 3-year warranty. Flat base cutout sizes: Ocean 10 - 10" x 10". Ocean 20 - 7-3/4"W x 13-1/2"L. Ocean 30 - 12-5/8"W x 17-3/4"L. Ocean 40 - 16-3/8" x 16-3/8". Ocean 44 - 17-3/16" x 17-3/16".
|
Storage Locker with Hinged Door from SAIL SYSTEMS
Increase your available storage area and save space at the same time. This recessed storage locker uses a continuous stainless steel hinge on the access door for long-lasting strength. Made of weather-able, acrylic capped ABS plastic for superior gloss, color retention and UV protection. Measures 11 3/4"H x 19 3/4"W x 7 1/4"D.
|
5/16" Wire Rope Clamp from SEADOG
Investment Cast 316 Stainless Body / AISI 304 Stainless U-Bolt. Accepts 5/16" wire. 1-5/8" Long. 1-3/8" wide.
|
Rule-A-Matic Plus Float Switch from RULE INDUSTRIES
Is the float switch working? It's easy to check! Features a Rule-A-Matic float switch and an impact-resistant cover to protect against debris and jamming. Wiring is "blocked" by a rubber grommet to provide strain relief. Includes a convenient feature for manual tests. Activation Method: Float with mechanical contacts. Dimensions: 2-3/4"H x 2-1/2"W x 4-7/8"L. Capacity: 20A @ 12/24/32V DC.
|
Solid Brass Vertical Action Galley Pump from FYNSPRAY
Vertical plunger pump with a gracefully arched spout. 50 strokes per gallon. 1"diameter tube. Fits 1/2"–5/8" hose. Requires 8 1/2" clearance below counter surface; 9 3/4" above Material: Brass. Capacity: 50 strokes/gal. Dimensions: 9 3/4"H. Cutout Size: 1 1/8". Clearance: 8 1/2".
|
4.5" Stainless-Steel Pop-Up “Neat Cleat” from ATTWOOD
Retractable stainless steel cleats retract to only 1/2" above deck and have direct drainage to the bilge. Corrosion-free. Install easily. Hardware included. Functions: Drains to bilge with drainage receptacle. Requires 3/8" ID tube (not supplied) . Material: Stainless steel . Height: Lowered, 1/2"; Raised, 1-5/8" . Line Size: 1-1/4" line opening . Cutout Size: 7/8" hole saw size. Max.
|
Gusher 10 Pump from WHALE PUMPS
Die-cast, epoxy-coated, anodized alloy, synthetic neoprene rubber diaphragm and stainless steel. Removable stainless handle with lanyard. To complete the installation, select either the Aluminum or Plastic Thru-Deck Kit, which seal the installation against water intrusion and and give it a finished look. Nitrile Diaphragm Kit, AK3714, available through special order. Material: Anodized aluminum . Dimensions: 8"H x 4-1/8"W x 5-3/4"L . Port Sizes: 1-1/2" .
|
|
from AWLGRIP, from LEWMAR, 1-3, from TODD ENTERPRISES, 1, 1-1
|
|
Home -> Engine Systems -> Engine Parts
**Electronic Conversion Kit|**Electronic Conversion Kit.
Part No: 18-5292
|
|
|
|
Home -> Foul Weather Gear & Jackets -> Foul Weather Gear -> Foul Weather Gear->IN10 Women's Inshore-Lite Jacket
Flexible and stylish, you’ll be comfortable on or off the boat in this Inshore Lite jacket. It has the features of a unisex coat but has been tailored specifically to fit a woman. Made of Dot 2™ waterproof fabrics, this jacket offers excellent breathability and durability. Women's Sizes: 6 - 14. Colors: Sky Blue, Graphite/Silver.
Part No: ICE BLUE-16
|
|
|
|
Home -> Foul Weather Gear & Jackets -> Foul Weather Gear -> Foul Weather Gear->Men’s IN10 Inshore-Lite Jacket
The Inshore-Lite Jacket is waterproof, has a stowable hood, zipper storm guard and cuff adjusters to ensure full wet weather protection. The waistpants complement the jacket. Quick and easy to get into, they are also perfect for wet weather conditions. Made from 2 Dot™ multi-layered fabrics, this gear offers excellent breathability and durability as well.
Part No: NAVY/SILVER-L
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains
**Bearing-Carrier|**Bearing-Carrier.
Part No: 18-1708
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting -> Navigation Lights->602 Series LED Side Lights
Pair of high-visibility LED side lights is certified for use on powerboats up to 20m (or 65. 6') with 12V electrical systems. Lights feature long lasting 12V LED bulbs rated at 100,000 hours and use 1/10 of the energy draw of standard lights. 2nm visibility range. Water resistant. Meet USCG and ABYC standards. Sold in pairs. Case Material: Chrome-plated bronze or black plastic. Case Dimensions: 3-1/2"L x 2-1/4"W x 7/8"H" . Mounting Hardware: #8 FHMS . Volts: 12V .
Part No: 0602DP1CHR
|
|
|
|
Home -> Sailboat -> Tiller & Rudder->Laminated Replacement Tillers
Replace that old ugly tiller with a new hand-made laminated ash and mahogany wood tiller, made to fit your rudder hardware, and pre-finished with multiple coats of premium marine spar varnish. Choose the right length and profile, and the butt-end measurements to fit your rudderhead hardware. Can’t find a good fit? Idasailor Marine can custom-build a tiller to your measurements . Custom tillers are shipped direct within 10 days . Click HERE to open the PDF custom order form.
Part No: 2600
|
|
|
|
Wagan’s Power Dome EX™ provides emergency power and a whole lot more! This rugged multi-purpose portable power center is perfect for marine, automotive or home emergency use. Use it as a power source for 110V AC or 12V DC applications such as computers, TVs, fax machines, audio, fans, electrical tools, etc. It can also start your car engine in an emergency situation. Jumper cables nest neatly at each end and the airhose stores in a compartment at the back. 40A external fuse.
Part No: 2454
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Equiplite Non Swivelling Connector
Non-Swiveling Connectors features a protective locking Velcro strap An anodized Hi-tensile Aluminum bobbin with a replaceable loop fitted in the center. Protective locking Velcro strap .
Part No: 10-5NS
|
|
|
|
Home -> Cabinet & Deck Hardware -> Deck Plates & Storage -> Fixed Storage->"Slimline Tackle Boxes"
Flush storage compartments hold two and three lidded Plano® drawers and feature sturdy "Slimline" styled doors with integrated heavy-duty hinges and hidden fasteners. Made of acrylic capped ABS. .
Part No: 45310000
|
|
|
|
Home -> Electronics -> Fishfinders -> Transducers and Accessories->Sonar Accessories
Included are: New Portable Transducers: mount on the transom or side of almost any wood, aluminum, or fiberglass boat and are for use at trolling speeds only New Trolling Motor Mount Transducers: designed to mount on to the body of most trolling motors AD-STM Trolling Motor Adaptor: Adapter hardware for attaching high speed sensor to trolling motor Other Thru-hull and transom mount transducers and hardware kits Temperature and speed sensors Transducer switches.
Part No: 710166-1
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports -> Ports->Self-Drain Opening Ports
For mounting where installation is within 15° of vertical. Angled drainage ramp molded on 1" spigot promotes drainage without having to make angled cuts in the hull. The ports can then be thru-bolted, which is impossible to do in windows where an angled spigot extends below the bolt holes. Constructed of strong ABS plastic with clear Lexan windows. Trim rings and screens are included. Beckson’s patented cam latches secure the window. Material: ABS plastic with clear Lexan windows .
Part No: PO414-WC-10
|
|
|
|
|
Home -> Sailboat -> Tiller & Rudder->Laminated Replacement Tillers
Replace that old ugly tiller with a new hand-made laminated ash and mahogany wood tiller, made to fit your rudder hardware, and pre-finished with multiple coats of premium marine spar varnish. Choose the right length and profile, and the butt-end measurements to fit your rudderhead hardware. Can’t find a good fit? Idasailor Marine can custom-build a tiller to your measurements . Custom tillers are shipped direct within 10 days . Click HERE to open the PDF custom order form.
Part No: 2300
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Dock Hardware->Rotomolded Float Drums
Constructed from a seamless polyethylene shell filled with low-density EPS foam. The shell is infused with UV inhibitors and has a minimum wall thickness of 0. 15". Unaffected by saltwater, gasoline, oil and most chemicals. Flat top has a flange with eight 1/2" holes for fasteners. Freeboard depends on how heavily the float is loaded—typically, floats are submerged about 4" on an unloaded dock.
Part No: 46118
|
|
|
|
Home -> Anchor & Docking -> Anchors->Stainless-Steel Spike Anchors
An easy-to-use tool for securing your boat off the beach, rocky or shale shoreline. Just drive the tubular handle downward to deliver the spike blade into the ground, then tie your boat off to the attached lower ring. For rock or shale, drive the spike in a few feet offshore where the ground is softer and attach a buoy and line to the top ring. Removes as easily as it drives in—by pulling the handle upward. Hot-dip galvanized with a rubber-dipped handle, or all stainless-steel.
Part No: SS-SOSS
|
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports -> Ports->Self-Drain Opening Ports
For mounting where installation is within 15° of vertical. Angled drainage ramp molded on 1" spigot promotes drainage without having to make angled cuts in the hull. The ports can then be thru-bolted, which is impossible to do in windows where an angled spigot extends below the bolt holes. Constructed of strong ABS plastic with clear Lexan windows. Trim rings and screens are included. Beckson’s patented cam latches secure the window. Material: ABS plastic with clear Lexan windows .
Part No: PO512-WC-10
|
|
|
|
Home -> Anchor & Docking -> Anchors -> River/Lake Anchors->Collapsible Box Anchor
Recommended for protected waters or beach use, this anchor’s unique shape enables it to set in most bottom types with half the rode normally needed for conventional anchors. Its fixed scoop design and narrow side panels set like a “cookie cutter” into sand, mud, grass or rock. A stabilizing bar and spring make it easy to lock the anchor open for use or collapse it for storage. Stainless-steel version is cast and polished 304 stainless. Style: Box . Material: Galvanized steel/stainless steel.
Part No: SBA
|
|
|
|
Home -> Ventilation -> Bilge Blowers->PAR Marine Blowers
These blowers are constructed with tough, reinforced plastic housings and a one-piece balanced rotor for maximum corrosion resistance in marine environments. Flexmount models have both inlet and outlet ports designed for slip-on flexible-duct connections. The blower may be rotated in the mounting bracket to permit installation with the discharge port in any direction. The inlet port can be connected with duct hose to the area requiring ventilation. Tough, reinforced plastic housings.
Part No: 35400-0000
|
|
|
|
Aluminum alloy sheave and dual Torlon® ball bearing races for higher working loads. Sheave: Anodized aluminum alloy . Ball Bearings: Torlon® Sheave Size: 2 3/8" (60mm) . Line Dia. : 7/16" max. . Cheek Material/Finish: Anodized aluminum alloy .
Part No: 29901614
|
|
|
|
Home -> Plumbing -> Marine Sanitation->Heavy Duty Holding Tanks
Heavy-duty holding tanks for tough jobs! USCG-approved tanks manufactured from white FDA-approved polyethylene. Molded-in, threaded ports eliminate stress cracks and leaking. Extra-heavy 1/4" wall thickness for strength and lower odor permeability. All ports are standard sizes . Tanks have two 1 1/2" female inlets and one 1/2" female vent inlet . Note: Plumbing fittings not included.
Part No: 01-13WMH
|
|
|
|
Home -> Anchor & Docking -> Anchors->Supreme Anchors
The sharp spear point digs right in, penetrates deeply and sets rapidly, and the dual operation shank has two slots for easy retrieval in different seabed conditions: Long slot for rock and coral, or short slot for sand, mud, weed and grass. Choose galvanized steel for maximum strength or polished stainless steel. Roll bar for self-righting resets Cons: Can be expensive depending what size and material you choose Style: Fixed shank "scoop" plow. Material: High-tensile steel.
Part No: SUP10
|
|
|
|
Home -> Seating & Covers -> Seating->Cape Cod Helm Seat
Cape Cod Seat America's #1 Saltwater Seat. A favorite among discriminating boaters for years, this classic seat affords good looks and extreme comfort. Redesigned cushion set makes this classic even better. Rugged, Roto-molded polyethylene construction and self-draining seat ensure its durability . Chair offered with or without cushions, which snap off for easy cleaning or storage . 21-1/2”H x 25”W x 18-1/2”D. White .
Part No: 85-1556
|
|
|
|
Home -> Plumbing -> Freshwater Systems->Paragon Jr. Pressure Water Pump
Paragon Jr. Pressure Water System The Paragon Jr. can handle the demands of multiple outlets, either as a saltwater washdown or freshwater system pump. Includes a 12V bronze rotary pump, pressure gauge, strainer and PST-1 accumulator tank. Solid-state dry-tank shutoff Operates between 20 and 40psi For boats to 45' 7 GPM Draw: 30A starting, 26A running Self Prime: 6' Dimensions: 12"L x 7"H x 8"dia. (pump) 12"L x 8"dia.
Part No: IPS-38
|
|
|
|
Home -> Plumbing -> Freshwater Systems
Swim 'N' Rinse Cold Water Transom Shower Designed for external locations, such as stern boarding platforms and swim steps. Complete with recessed mounting panel. Installs neatly and easily. Can be hooked up to any existing pressure water system. Base plate: 6-1/2" x 11-1/2" . Allow 3-1/2" behind surface.
Part No: RT1648
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Awlcraft 2000 (Professional Application Only)
This two-component, fast-drying urethane coating provides a long-lasting, buffable finish with excellent gloss and color retention. Do not use below the waterline.
Part No: F7200/1QTUS
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Full-Flow Flanged Bronze Seacocks
Components include 316 stainless steel, full-flow ball, PTFE seals and seats, all bronze castings and a patented reversing handle that facilitates installation and use in cramped locations. Includes bonding wire attachment and drain plug on each side of body. Top fitting is NPT and bottom is NPS.
Part No: BV-1000
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks->Floating Dock Lifting Ladders
D. pipe made from marine grade aluminum 6063 T-5 to resist corrosion All welded construction for strength Floating Dock Lifting Ladder stores upright completely out of the water New double-rung locking mechanism results in the sturdiest lifting ladder in the industry Extruded aluminum channels are serrated to produce a non-skid surface rung with no sharp edges Rated for 665 lbs.
Part No: FL-3
|
|
![Sherwood Service Kit from JABSCO]( "Sherwood Service Kit from JABSCO")
|
|
Home -> Engine Systems -> Engine Parts
Fits Sherwood model G-5 for chrysler engines LM 318, LM 340, LM 360, LM 383, LM 400.
Part No: 90184-0001
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Forged Snap Shackles
Highest quality drop-forged 17-4 PH stainless-steel shackles are beautifully polished, with smooth contours. Great strength and reliability.
Part No: 2478
|
|
|
|
Home -> Anchor & Docking -> Windlasses & Rollers -> Windlass Accessories->Windlass Handheld Remote Controls
Imtra offers the latest in handheld remote controls from Quick™ Compact and watertight, these multi-purpose controls are manufactured using only the highest quality materials and components. Available in 2-, 4-, 6- or 8-function models, with or without an integrated LED lamp. Each is supplied with marine plug, socket and cover, stowage bracket, and 7' spiral cord. Universal power supply (12 or 24V DC).
Part No: SPA-HRC1002W
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers->Bike Racks
The bike rack that gives you more time to rideIncrease your riding time by decreasing your loading time with these racks that make mounting your bike to your vehicle quick and easy. All bike racks are compatible with disc brake systems, feature strong and rigid 6000-series aluminum trays and lock up tight with the included key locks. The Universal Fork Mount features a tray that fits tire sizes up to 2. The Universal Upright Mount allows you to mount your bike without removing the front wheel.
Part No: INA381
|
|
|
