West Marine/Stearns PFD Rearming Kit from WEST MARINE
West Marine/Stearns PFD Rearming Kit Style: Manual. Cylinder Weight: 16g. Cylinder Neck Diameter: 3/8" threaded. Inflator Type: Halkey-Roberts. Kit Contents: Cylinder, green pin. PFD Brands Commonly Used With*: West Marine/Stearns PFD. Inflator Number: 840. *The term "PFD Brands Commonly Used With" is not all inclusive. Rearming Kits may be used with other brands and vests.

Screen for Nibo 1070-10A Hatch from BOMAR
With these spare parts for your Nibo or Gray hatch, you can replace worn or damaged parts for a fraction of the cost of replacing the hatch. Low-Profile Gasket in a 9' length. 9/16" Gasket in a 10' length. Available for the 100 series: Riser Arm Male Hatch Knob Female Hatch Knob. Hatch Tiedown Dog. Left-Locking Quick Dog.

Ocean Mate I™ SOLAS Vest, Standard from STEARNS
Ocean Mate™ I Type I flotation device complies with SOLAS 83 requirements. Minimum of 18 lb. buoyancy (child). Reversible offshore PFD designed for quick donning . 3M Scotchlite Reflective Material SOLAS-grade 6755 on panels . Stackable for easy storage . Heavy-duty stainless steel hardware with an attached SOLAS whistle . Light storage pocket .

5/16" Wire Rope Clamp from SEADOG
Investment Cast 316 Stainless Body / AISI 304 Stainless U-Bolt. Accepts 5/16" wire. 1-5/8" Long. 1-3/8" wide.

Antifreeze, -100 Engine & Water System - Gallon from SEAFIT
West Marine Pure Oceans -100° (-73°C) Marine Antifreeze provides the ultimate in extreme cold weather and corrosion protection for drinking water systems and all engines. Its premium additive package prevents corrosion of aluminum, copper, brass and solder, but will not harm rubber, seals or hose materials. Provides burst protection to -100°F (-73°C) and freeze protection within a range of -58°F to -63°F (-50°C to - 52°C).

50' Braided Polyester Cord from NEW ENGLAND ROPES
A low-stretch cord that’s great for flag halyards, foredeck netting, or light-air spinnaker sheets. Length: 50'. Diameter: 1/8". Best use: Utility cord, flag halyards . Construction: Braided polyester . Breaking strength: 530lb. . Stretch: 3% at 15% of breaking strength .

1/8" NPT X 5/16" Brass hose barb from MOELLER
1/8 NPT X 5/16" Brass hose barbs with male threads.

1/4" NPT X 5/16" Brass hose barb from MOELLER
1/4 NPT X 5/16" Brass hose barbs with male threads.

Fuel Line - 5/16" - Universal from MOELLER
Each assembly comes complete with a large alcohol resistant primer bulb with fittings, co-extruded braided fuel line hose which is alcohol resistant, and barb connectors which can be used with large, as well as small engines. Assemblies use a compounded, tough & pliable UV-resistant hose. Promotes maximum fuel flow. Includes fittings built to OEM Specifications for replacement parts. Uses o-ring construction on all fittings for tight, leak-free connections. Specifications: 5/16".

Large Dinghy Snatch Block, 9/16" Line Dia., 40mm Sheave Dia., 1300 SWL from HOLT ALLEN
Glass-filled nylon cheeks with 316 stainless straps increase working efficiency more than 50% with minimal weight increase. Stainless ball bearings in a polypropylene cassette. For spinnaker sheet, jib sheet turning blocks, etc. Cheek Material/Finish: Glass filled nylon. Ball Bearing: Stainless ball bearings. Opening: Hinged cheek/axle.

Black 3-Strand Nylon, 7/16'' Diameter, 5300lb. Breaking Strength from NEW ENGLAND ROPES
Dramatic resistance to damaging internal and external abrasion Combining premium nylon fiber with a high-quality marine coating and New England Rope’s superior manufacturing processes produces line that is five times more abrasion-resistant wet than any other nylon line. You can actually feel this critical performance advantage when you handle the supple line. Stretch: 16% at 15% of breaking strength. *Approximately 10–15% less strength than White Premium Three-Strand Nylon.

Fuel Hose, Type B-2 5/16" from MOELLER
We offer 5/16" and 3/8" SCG B-2 alcohol-resistant hose as used in pre-assembled fuel line. Sold by the foot.

Series 250 Exhaust Hose, 7/8"ID, 1-3/16"OD, 565psi Burst Pressure from SHIELDS RUBBER
For use in all marine water and wet-exhaust applications. Also for marine wet-exhaust where connection requires great length (greater than 4 x ID) or significant bend. Meets or exceeds standards for certified wet-exhaust hose. Sold by the foot with a maximum continuous length of 10' except where preceded by an asterisk, which indicates a maximum continuous length of 50'. Construction: Black synthetic rubber with wire helix and HD synthetic cord . Temperature Range: –20° to 200° F .

Triple, 1/2" - 9/16" Line Dia., 59.6oz from LEWMAR
Allows controlled release under loadThe award winning D2 Rope Clutch, built for big boat applications, allows for an easy and controlled release even at full holding power. Instead of just jamming the rope, the D2 clutch's Domino Cluster mechanism has a longer holding pattern for better grip and less rope wear. Fits line sizes from 5/16" (8mm) to 9/16" (14mm). Application: High load applications on boats to 55', low load and control lines on larger boats . Safe Working Load: 2650lb.

1/4" - 5/16" Anchor connector from WEST MARINE
Cleaner than standard anchor shackles, an anchor connector pulls easily over bow roller. Attaches with an Allen wrench (Included) . High-grade galvanized steel . Safe Working Loads: 1/4" - 5/16" unit: 1,390lbs.