Top Sellers
Non-Locking Flush Lock - Chrome/White with Offset Cam Bar from PERKO
Non-Locking chome plated zinc alloy and white plastic with offset adjustable cam bar. Detents indicate open or closed position. Door thickness: 1/4" to 1-1/8" . Face plate dimensions: 2-1/2" x 2-1/2" . Adjustment latch bar: 3/8" to 3" .
|
Mast Hound, 3IN X 4 1/2IN from RONSTAN
A simple effective fitting for terminating wire rigging. 304 Stainless. Fits masts 3" -4. 5" dia. Weight 3. 9oz.
|
Anchor Safety Strap from LEWMAR
18" long stainless steel; PVC coated with 4" bolt, nut and snap link Fits 1/4", 5/16" and 3/8" chain.
|
WindMate™ 200 Wind Meter with Wind Direction from SPEEDTECH INSTRUMENT
Get accurate weather data, anytime, anywhere! Weather-on-the-spot in handheld units with convenient pocketknife design. WindMate 200 includes digital compass for wind direction, cross/head/tail wind readings and wind speed, temp and wind chill. Use it as a bearing compass! Base Type: Threaded for tripod mount . Battery Type: CR2032 Lithium battery (included) . Display Type: LCD . Dimensions: 3. 28"H x 1. 2"W x . 38" . Waterproof: Water-resistant to 4' and floats .
|
500gph 12V Bilge Pump, 3/4" Port, 1.9A Draw, 2.5A Fuse, 3-1/2"H x 2-3/8"W from RULE INDUSTRIES
Tough and reliable at a value price Great performance at a value price, Rule submersible pumps are the first choice for many boat manufacturers. Their motors feature stainless-steel shafts, water cooling and a vibration-free centrifugal impeller that won’t burn out if run dry. Strainer bases can easily be snapped off for cleaning. Each pump requires a panel switch for manual operation or a float switch for automatic operation. Select from 12V, 24V and 32V models. Can run dry without damage.
|
Furler Kit for Boat Length to 16', 500lb. SWL, 1/8" Max. Wire dia., 1/4" Pin dia., 2-1/2" Pin-to-Pin, 5/32" Furling Line dia. from HARKEN
Furl or set your jib from your cockpit Harken small boat furlers allow the sail to be set and furled from the cockpit, a critical convenience in many racing dinghies and trailerable sailboats. Constructed of Hardkote anodized Teflon-impregnated aluminum, they feature multiple stacked races of Delrin or Torlon ball bearings for smooth rotation under load. The jib’s luff wire must be properly seized to the sail, since it carries most of the headstay load. 434 furler for dinghies under 16ft. (4.
|
800gph Tsunami Bilge Pump, 2.5A @ 12V DC Draw, 3/4" Port, 4-3/8"H x 3-1/2"W from ATTWOOD
Versatile Tsunami pumps feature interchangeable, twist-and-lock cartridges that reduce maintenance time. All wires are caulked and tinned to prevent water wicking. Rugged glass and mineral-filled polymer construction resists chemicals, fuel and detergents and the compact, low-profile design eases installation in tight spaces.
|
18-1/2" x 18-1/2" Shade/Screen, Fits Bomar Hatches, White from SKYSHADE
New screen and shade solution provides the ultimate in heat and light reflection with bug free ventilation for onboard comfort. Combines a retractable hatch shade and flyscreen system in a low-profile styled cassette. Made in extruded polymer and comes with integral hatch liner option, matching hatch corner radii and in three sizes available with round hatch adapter. Installation is simple to fit with four one piece corner mounted screws with integral screw caps . Available in white or beige.
|
Medium Edging, White, 25' Coil, 3-1/2"H x 1-1/2"W from TAYLOR
Prevent scuffing when you dock Vinyl dock guard is specially formulated for softness and durability to protect your boat or dinghy. Each piece installs easily with screws or nails to the edge of docks, piers and floats. Material: Extruded PVC . Attachment Method: Stainless steel dock nails . Shock Absorption Mechanism: Flexible PVC .
|
|
|
|
|
|
|
Shock Cord-to-Webbing Connector from BAINBRIDGE
Lets you connect shock cord to webbing for hiking straps, sail ties, etc. For 1" webbing and 1/4" shock cord.
|
Halyard Kit, 1/8" Wire Dia., 3/8" Line Dia., 40' Wire Length, 40' Line Length from WEST MARINE RIGGING
Convenient, do-it-yourself kits offer an economical way to replace old halyards We offer these kits for those who want to replace their old halyards or install new low-stretch halyards. Made of the highest quality 7x19 oil-free stainless wire and New England Ropes premium white Sta-Set yacht braid. Comes with a Flemish eye at the rope end, and a thimble and sleeve, but no shackle. Rope Type: Sta-Set Yacht Braid . Shackle: Flemish eye splice, sleeve and thimble, no shackle .
|
Acrylic Canvas Drink Holder, 5-1/8"W x 5-1/8"H x 3-9/16"L from RONSTAN
Ronstan rope bags can be removed and stored inside the boat when not in use; all that remains in sight is the soft white plush side of the loop attachment panel—and no sharp hooks! RF3700 Series Acrylic Canvas Bags Acrylic rope bags have a classic navy style. They are lightweight, water resistant and will retain shape. Made of white, water-repellent PVC with black water-draining polyurethane mesh, these rope bags are extremely durable. Technical features include carbon tubes for easy opening.
|
|
1, 2-1, 18' 1 1, 3-1, 4-1, 2" from LASDROP SHAFT SEALS, 2"
|
|
The most powerful and feature-packed for the bow of your boat!These trolling motors feature ultra-responsive steering, a heavy duty mount that boasts superior strength and an indestructible composite shaft that flexes on impact so you can go right on fishing. These motors also feature the Bowguard 360° Breakaway Mount that breaks away on impact from any angle to protect motor, shaft and boat. 5 speed or variable speed depending on model. Steering Type: Tilt foot control or tilt control handle.
Part No: 1368551
|
|
|
|
Home -> Sailboat -> Winches -> Non Self-Tailing Winches->One- & Two-Speed Non-Self-Tailing Winches
More bearings and pawls combined with Italian styling—better form and function Harken’s precision winches are extremely reliable and exceptionally efficient. Built to very fine tolerances, these winches feature large roller bearings on most gears and drive shafts. Use single-speed winches for sheets on small boats and for halyards on medium and large boats. Use small two-speed winches for sheets and halyards on boats of all sizes. Winches as small as the 48 have roller bearings in every gear.
Part No: B40.2A
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Gen II Shaft Seal
The Gen II offers exclusive features that make it the premier shaft seal on the market. The Friction Ring assembly is mounted with a rigid connection hose and uses a carbon graphite sealing surface all encased by a durable copolymer housing. Built into the friction ring assembly is a cutlass bearing to ensure proper and constant alignment to the shaft. The Clamp/Pressure Assembly secures the assembly around the shaft, preventing the galling or damage to the shaft that can occur with setscrews.
Part No: G-212-4
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Gen II Shaft Seal
The Gen II offers exclusive features that make it the premier shaft seal on the market. The Friction Ring assembly is mounted with a rigid connection hose and uses a carbon graphite sealing surface all encased by a durable copolymer housing. Built into the friction ring assembly is a cutlass bearing to ensure proper and constant alignment to the shaft. The Clamp/Pressure Assembly secures the assembly around the shaft, preventing the galling or damage to the shaft that can occur with setscrews.
Part No: G-212-334
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Gen II Shaft Seal
The Gen II offers exclusive features that make it the premier shaft seal on the market. The Friction Ring assembly is mounted with a rigid connection hose and uses a carbon graphite sealing surface all encased by a durable copolymer housing. Built into the friction ring assembly is a cutlass bearing to ensure proper and constant alignment to the shaft. The Clamp/Pressure Assembly secures the assembly around the shaft, preventing the galling or damage to the shaft that can occur with setscrews.
Part No: G-212-312
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Gen II Shaft Seal
The Gen II offers exclusive features that make it the premier shaft seal on the market. The Friction Ring assembly is mounted with a rigid connection hose and uses a carbon graphite sealing surface all encased by a durable copolymer housing. Built into the friction ring assembly is a cutlass bearing to ensure proper and constant alignment to the shaft. The Clamp/Pressure Assembly secures the assembly around the shaft, preventing the galling or damage to the shaft that can occur with setscrews.
Part No: G-212-412
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-314-412
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Gen II Shaft Seal
The Gen II offers exclusive features that make it the premier shaft seal on the market. The Friction Ring assembly is mounted with a rigid connection hose and uses a carbon graphite sealing surface all encased by a durable copolymer housing. Built into the friction ring assembly is a cutlass bearing to ensure proper and constant alignment to the shaft. The Clamp/Pressure Assembly secures the assembly around the shaft, preventing the galling or damage to the shaft that can occur with setscrews.
Part No: G-212-314
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-314-5
|
|
|
|
Home -> Sailboat -> Headsail Furling->Twin-Groove Headstay Systems
Used worldwide on boats from 20'–140' in events from America’s Cup, Key West Race Week and everything in between! The smooth foil shape in this one-piece headstay system does not disturb airflow along the luff. A special prefeeder uses two oversized silicon bronze rollers to smooth out the sail luff on the way up, preventing jams and eliminating the need for the foredeck crew to hand-feed the sail. The complete system includes extrusion, feeder, prefeeder, top cap and extension.
Part No: 1706-46
|
|
|
|
Home -> Anchor & Docking -> Anchors->Manson Racer Anchors
The Manson Racer is the first anchor on the market specifically tailored for racing yachts of all sizes. This anchor is made from high-tensile aluminium and has been fully welded and anodized ready for use. The Racer is an effective anchor with great weight saving potential. The Manson Racers' hard-wearing stability balls are designed to reduce the width of the lower balance bar. The balls are designed to encourage the anchor to set faster and resist rotation while embedded in the sea floor.
Part No: R12
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports->Ocean Series Hatches
Well-engineered hatches with CE-certified quality materials and construction. Smoothly styled external hinge enables one-hand operation. Inside handles feature locks that cannot be forced from the outside. Flat base or 1'' flange base (pictured). 3-year warranty. Flat base cutout sizes: Ocean 10 - 10" x 10". Ocean 20 - 7-3/4"W x 13-1/2"L. Ocean 30 - 12-5/8"W x 17-3/4"L. Ocean 40 - 16-3/8" x 16-3/8". Ocean 44 - 17-3/16" x 17-3/16".
Part No: 39654070
|
|
|
|
Home -> Fishing -> Trolling Motors->Great White Saltwater Series Hand-Control Trolling Motors
Heat. Corrosion. Big-water pounding. All in a day's work for these predators. From the specially formulated coating to the epoxy-sealed lower unit and the industry's only stainless steel shaft - the durability starts on the outside and goes all the way to the core. You Never Stop, and there's only one motor ready to go the distance with you in one of the most caustic environments on earth. Digital Guardian monitors your motor's amp draw, heat dissipation, output and other vital parameters.
Part No: 922410020
|
|
|
|
Home -> Fishing -> Rods->IGFA International® V Rods
Models 5080B and 5130B feature the Bent Butt, which lowers the reel for greater angler comfort, lengthening the fulcrum lever to your advantage. Penn IGFA Rods feature a parabolic taper, ideal for fighting fish from the chair, applying maximum pressure to the fish with a mechanical advantage in favor of the angler. While these rods are noticed at the dock for their visual appeal, you'll favor these rods on the water for their fish-fighting capabilities. Blank: P450 Super glass, hand wrapped .
Part No: 0009-0952
|
|
|
|
Home -> Cabin & Galley -> Refrigeration & Coolers -> Coolers & Ice Chests->Compressor Cooler AC/DC
Introducing the Coolmatic® CF Series. These units offer ample storage for refrigerated and frozen foods, as well as many technical extras and problem-free operation from all on-board and AC adapter systems High-Impact Engineered Polymer Cabinet will not Dent or Rust Two-Tone Gray Housing Matches Most Automotive Interiors Top Lid Locks, Detaches and Folds Up Carrying Handle or Carrying Grip for Easy Transport Removable Coated Wire Basket Resists Freezing (not included on the CF18 or CF-35.
Part No: CF-035AC110
|
|
|
|
Home -> Fishing -> Trolling Motors -> Trolling Motors, Bow->Great White Saltwater Series Trolling Motors
MotorGuide Great White Salt Water Series trolling motors are built tough to stand up to the corrosive salt water world where you use your boat. They also include dual saltwater anodes for the best in galvanic corrosion protection. Their new three blade Machete III prop is quieter and has a smaller diameter than two blade designs for improved shallow water performance. Variable speed Digital motors include Digital Guardian, with no exposed electronics in the head. Automatic hands-free reset, .
Part No: 924410030
|
|
|
|
Home -> Fishing -> Trolling Motors->Riptide Saltwater Bow-Mount Trolling Motors
Riptide trolling motors Riptide motors are built saltwater tough, with premium-grade marine alloys, including aluminum upper arms that are impervious to rust. Variable speed models feature Maximizer technology that provides up to five times longer run time on a single charge. Bow Mounts: Latch and Door—New compact mount is engineered for today's popular technical skiffs and "flats" boats. BowGuard 360—breaks away on impact from any direction, then automatically resets itself.
Part No: 1363442
|
|
|
|
Home -> Plumbing -> Marine Sanitation->Sea Era Macerating Electric Toilets
Built-in discharge fitting accepts either 1-1/2" or 1" hose without the need for an adapter. Discharge pump can handle a vented loop with a maximum height of 6' and uses a full-sized joker valve to avoid clogging. Bowl rotates 90º for easy installation. Operation of “Household” style (160HF012) requires connection to vessel’s pressure water system. Marine style has integral intake pump. Draw: 18A @ 12V DC . Port Sizes: 3/4" inlet, 1 or 1-1/2" discharge .
Part No: 160MF024
|
|
|
|
Home -> Fishing -> Fishing Accessories -> Outriggers->Premium Telescoping Aluminum Outrigger Poles
Cold-drawn aluminum tubing provides maximum strength, while duplex anodization enhances durability and looks. Both the black/gold and the silver/black poles include color trim rings and stainless-steel line guides and feature a stainless-steel snap button for a positive lock-in position. Includes heavy-duty plastic storage bag. Cold-drawn aluminum tubing for maximum strength. Duplex anodization enhances durability and looks. Includes heavy-duty plastic storage bag.
Part No: 88908
|
|
|
|
Home -> Engine Systems -> Trim Tabs & Hydrofoils -> Trim Tabs->Traditional Hydraulic Trim Tabs
Bennett Standard Trim Tabs fit boats from 15'-38' (larger sets available). Using the helm control, you can adjust the trim tabs individually or together to create the perfect cruising attitude. Increase speed, fuel economy, smooth a rough ride and get on plane faster. Precise adjustments to boat attitude are easy. Kits include: Two high-quality, 13-gauge, 304 stainless steel after-planes with strong nylon/composite actuators. Euro-style rocker switch control fits a standard 2 1/2" dia.
Part No: 369E
|
|
|
|
Home -> Seating & Covers -> Seating
Recommended for use with 50lb, offshore tackle when fighting fish, this high quality seat is constructed of rugged, UV-resistant polyethylene. with Mahogany backrest. Tufted bottom and arm cushions. Anodized aluminum pedestal and locking swivel/slider.
Part No: TODD#WE-1000
|
|
|
|
Home -> Fishing -> Reels -> Conventional Reels->International VSX Series Reels
This premium reel was designed for braided linesFeaturing an improved design over V-series reels, and built specifically to handle braided lines. Powerful double-disc drag with 150-degree drag quadrant is engineered specifically to muscle through extreme drag settings while maintaining an appropriate and smooth drag curve throughout the entire range of the drag lever. Stainless steel main and pinion gears . Drag cam to achieve extreme drag ranges.
Part No: 50VSX
|
|
|
|
Home -> Safety -> Fire Extinguishers->MA2 Manual/Auto Total Flooding Clean Agent Fire Extinguishers, FE-241
The fastest and safest way to combat an engine room fire. The MA2 series is USCG approved and is available with FE241 fire suppression agent. The extinguishing agent FE-241 is for use in unoccupied areas only. FE241 is approved worldwide and is a widely used clean agent replacement for Halon, prevents fires with a lower concentration of agent and is safe for use around people. Both agents leave no residue, unlike dry chemical extinguishers. Easy-to-read, color-coded cylinder pressure gauges.
Part No: MA2-400-FE241
|
|
|
|
Home -> Fishing -> Reels -> Conventional Reels->International V Series Lever Drag Reels
The International® V reels offer the most advanced and reliable fish-fighting performance in the world, with an ergonomically designed, contoured, one-piece machined frame, and unbelievable cranking power and strength. Shift: Penn’s Quick Shift engages automatically with a deliberate bump of the shift button (low-speed) or spin of the shift knob (high-speed). This is the easiest, and most angler-friendly two-speed feature on the market, and can be perfomed without letting go of the handle. .
Part No: 0009-0908
|
|
|
|
Home -> Engine Systems -> Control Systems -> Engine Controls->SL-3 Controls
SL-3 is specifically engineered for installation without control modifications. Port or starboard installation with various cable-entry angles. Adapts for push or pull mode without tools. “Easy-On” cable design means no shift or throttle adjustments. Optional trim switch in handle grip for one-hand operation. Functions: Gearshift/throttle . Levers: Dual functions—each lever controls throttle and shift . Lever Material: Metal . Features: Push button for neutral Adjustable brake .
Part No: CH7840P
|
|
|
|
|
Home -> Fishing -> Fishing Accessories -> Outriggers->Premium Telescoping Aluminum Outrigger Poles
Cold-drawn aluminum tubing provides maximum strength, while duplex anodization enhances durability and looks. Both the black/gold and the silver/black poles include color trim rings and stainless-steel line guides and feature a stainless-steel snap button for a positive lock-in position. Includes heavy-duty plastic storage bag. Cold-drawn aluminum tubing for maximum strength. Duplex anodization enhances durability and looks. Includes heavy-duty plastic storage bag.
Part No: 88909
|
|
|
|
Home -> Fishing -> Trolling Motors->Wireless Series Trolling Motors
The most pontoon-friendly trolling motor ever made, it has a small-footprint mount that is removable for locking, one-hand stow and deploy, and capability to use up to four handheld Digital Remote Control units or foot pedals (in any combination). Speed control: Digital Guardian variable speed control is completely epoxy-sealed and protected from heat, moisture, corrosion and shock, greatly improving durability. Improved efficiency results in extended battery life and more time on the water.
Part No: 970100030
|
|
|
|
|
Home -> Fishing -> Trolling Motors->Wireless Series Trolling Motors
The most pontoon-friendly trolling motor ever made, it has a small-footprint mount that is removable for locking, one-hand stow and deploy, and capability to use up to four handheld Digital Remote Control units or foot pedals (in any combination). Speed control: Digital Guardian variable speed control is completely epoxy-sealed and protected from heat, moisture, corrosion and shock, greatly improving durability. Improved efficiency results in extended battery life and more time on the water.
Part No: 970100020
|
|
|
|
Home -> Sailboat -> Headsail Furling -> Furling Accessories->Twin Groove Carbo Racing Foil Kits
Carbo Racing Foil material is 15% lighter than PVC, and is very low in friction, making hoists, douses, and sail changes faster. Impact resistance is increased, with less damage from spinnaker poles, especially in cold weather. The black color provides superior UV protection, and is easy to see against a light sky, making the jib trimmer’s job easier. Installation is simple, because the Carbo Foil uncoils and straightens. The foil snaps onto the stay easily, and can be done with the mast up.
Part No: 7001.16M
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Cylinder Head Assy|**Cylinder Head Assy.
Part No: 18-4484
|
|
|
