Top Sellers
Delrin Sheave, 1/2" Max. Line Dia., 1-7/16" OD, 3/8" ID, 5/8" Width from SCHAEFER
Schaefer sheaves are designed to be compatible with Schaefer products, and are not intended for use in other manufacturer's blocks. Delrin sheaves are injection molded with UV inhibitors and monitored molding cycles for a stronger product.
|
300 Series Fairlead Block, Fixed Style, 2-7/32" x 3/4" from SCHAEFER
Same as the Schaefer 200 Series fairlead blocks, but with twice the working load. Use #10 fasteners. Configuration: Lead block. Sheave: UV-stabilized white Delrin®. Ball Bearings: Delrin. Sheave Size: 1-7/16" (37mm). Line Diameter: 7/16". Cheek Material/Finish: Polished stainless.
|
Lower Unit Quart Pump from WEST MARINE
Metal threaded fitting fits MerCruiser, OMC, Evinrude, Johnson, Honda (70-90hp), Volvo, Force and Gamefisher lower units Fits standard quart plastic bottles. Flexible hose gets to hard-to-reach fill plugs.
|
Universal Enamels, Hunter Green from RUST-OLEUM
For application on diverse surfaces including fiberglass, wood, plastic, metal—even vinyl! These enamels are rust, fade, chip and chemical resistant and remain flexibile in extreme conditions. Ergonomic bottle with trigger actuation eliminates drips and finger fatigue. New misting system minimizes overspray and permits spraying from any angle—even upside down! Colors (except Flat Black) dry to a gloss finish. 12oz.
|
Brightside Pre-Kote Primer - Gray, Quart from INTERLUX
Fills minor blemishes and sands easilyOne part primer for use with Brightside or any other one-part topside enamel. Microspheres provide high build and improved sandability. (Replaces Brightside Primer and 279 White Undercoater. ) Application: Brush, roller, airless/conventional spray . Number of Coats Recommended: One or two, depending on surface condition. Drying: Overcoating: 6 to 12 hrs. Drying Time: To touch: 1 to 3 hrs. Coverage: Brush: 112 sq. ft/qt, 450 sq. ft/gal; Spray: 87 sq.
|
Snap Furl CF-700 Furling System from SCHAEFER
" Small boat furler comparison, Practical SailorSnapFurl systems come in two sizes to accommodate boats 16' to 24' and boats 24' to 28' and represents the latest in quality Schaefer design and engineering. The efficient Round Geon™ PVC foil snaps quickly and easily around your boat’s existing headstay without the need for special tools or modifications to the rig. System SnapFurl CF-500 for Boats 16’ to 24’ (4. Long fiber reinforced injection molded components make SnapFurl CF 500 unique.
|
Adaptor Fitting for Suzuki & Honda Lower Units from WEST MARINE
Metal threaded fitting fits MerCruiser, OMC, Evinrude, Johnson, Honda (70-90hp), Volvo, Force and Gamefisher lower units Fits standard quart plastic bottles. Flexible hose gets to hard-to-reach fill plugs.
|
Tach Diesel Mag. P.U. 4000 rpm from TELEFLEX
A popular choice for gas and diesel inboard engines, White Premier instruments feature white dials with modern black and blue graphics and superior light pipe illumination. When illuminated, black dial grads and pointer become red. Fog-resistant design for enhanced readability.
|
Marine Structural Filler - Quart from WEST MARINE
Great for fiberglass and sheet metal ding repairsFiberglass filler with long strand reinforcing fibers for fiberglass and sheet metal repairs. Water-resistant. Hardener included. Great for quick and easy ding repair on fibergalss surfboards, sailboards, canoes and runabouts. Formulation: Polyester putty . Recommended Usage: Fiberglass and sheet metal repairs . Color: White.
|
12 Volt White Dual Trumpet Mini Air Horn from AFI
White epoxy powder-coated finish over solid brass. Noncorrosive Lexan® diaphragm. 12vDC. . Draws 20 amps max. Includes compressor, air tubing, fittings, and hardware. 5" W x 3-3/4"H x 9-1/2" L.
|
Seat Cushion - Fits 162 qt. coolers from IGLOO
Hard to find accessories and replacement parts for Igloo products White seat cushion for 162 quart model.
|
Fiberglass Cleaner and Wax - Quart from SEAPOWER MARINE PROD
Cleans and waxes in one easy stepCleans, waxes, seals and protects the fiberglass surface. Contains the finest Carnauba waxes and silicones and removes surface oxidation, residue, dock marks, grease and dirt while leaving behind a durable high-gloss finish. Excellent for hand or machine use. Quart.
|
Non-Locking Flush Lock - Chrome/White with Offset Cam Bar from PERKO
Non-Locking chome plated zinc alloy and white plastic with offset adjustable cam bar. Detents indicate open or closed position. Door thickness: 1/4" to 1-1/8" . Face plate dimensions: 2-1/2" x 2-1/2" . Adjustment latch bar: 3/8" to 3" .
|
101 Polysulfide Marine Sealant - White, 10 OZ from 3M PRODUCTS
Adhesive/sealant for a wide variety of materialsOne-part polysulfide product seals joints between similar and dissimilar surfaces wood, fiberglass, metal and glass above and below the waterline. Non-sagging, non-shrinking and permanently flexible. Excellent resistance to weathering. White. Recommended Usage: Seals mechanically fastened joints, above or below water; fiberglass, wood, metal, most plastics. Cure Time: Tack free: 5 hrs; complete cure in 14-21 days; remains permanently flexible.
|
20" x 20" Shade/Screen, Fits Lewmar Hatches, White from SKYSHADE
New screen and shade solution provides the ultimate in heat and light reflection with bug free ventilation for onboard comfort. Combines a retractable hatch shade and flyscreen system in a low-profile styled cassette. Made in extruded polymer and comes with integral hatch liner option, matching hatch corner radii and in three sizes available with round hatch adapter. Installation is simple to fit with four one piece corner mounted screws with integral screw caps . Available in white or beige.
|
|
from SCHAEFER, Quart from STERLING, LP Enamel - Hatteras White
|
|
Home -> Sailboat -> Rigging Products->Quick Attach™ Stud Swage Fitting
The advantage of "Quick Attach" over conventional fittings is the arrangement of the wedges on the outside of the cable which makes assembly much easier and allows different types of wire to be used with the same fitting. The Suncor Quick Attach Stud mechanical swage fitting allows very fast attachment to any type of cable (1X19, 7X19, or 7X7) using only simple tools. Working Load Limit (WLL) is determined by the WLL of the wire being used.
Part No: C0771-2013
|
|
|
|
Semi-rigid, half-moon shaped storage bag attaches with included hooks to lifelines and toe-rails to keep gear contained on deck. Heavy-duty reinforced, rip-stop nylon construction with buckle closure. 24" x 23.
Part No: BP610
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks -> Ladders & Ramps->Dock Ladders
Heavy-duty, marine-grade aluminum ladders are constructed from 1-1/4" pipe with extruded channel steps, welded for strength. 17"W flat steps have nonskid surfaces and no sharp edges. 12" vertical spacing between steps. Standard style is for permanent mounting on a dock or seawall. Swing style has hinged steps that swing up and back allowing complete ladder to be kept out of the water. Lifting style has steps that slide up and down and lock in either position. max.
Part No: S-3
|
|
|
|
Home -> Sailboat -> Blocks->M-Series Blocks
Computer-machined aluminum construction maintains sideplate strength while minimizing weight, giving these blocks an incredible strength-to-weight ratio and a distinctive, clean look. Torlon™ rollers and Delrin™ ball bearings in the sheave handle high loads with low friction. An excellent alternative for sailors interested in a lightweight choice. Sheave: Aluminum. Ball Bearings: Delrin.
Part No: M66-10
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Polyethylene Dock Steps
Make climbing aboard easier! Durable, UV-resistant, white polyethylene steps have StepSafe non-slip pads for maximum slip protection. Wide 1-1/2" flange makes dock mounting easy. Washable surface cleans easily with soap and water. Handrail and mounting hardware sold separately.
Part No: 47200
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->2-Part Linear Polyurethane Enamel
A popular choice among many boatyard professionals as well as do-it-yourself boat owners who want superb gloss and durability. Pros spray it, yet the Sterling Brushing System captures the same look, thanks to its unique flow properties. Sterling brushing system: Pick a color base, mix 2:1 with U-2964. Add a dash of U-2900 accelerator in cool weather. Thin about 25% with U-2965. Apply on nonskid surfaces with low-nap foam rollers and tip several times. Apply with premium China bristle brush.
Part No: U-1528 QT
|
|
|
|
Home -> Engine Systems -> Engine Parts->Spin-On Series Gasoline Fuel Filter/Water Separators
Racor's famous Aquabloc® filter media separates water into the bottom of the drain bowl and ensures virtually 100% removal of water and solid contaminants. Filters come in different sizes for gasoline engines and any rate of fuel flow. Designed for use on the suction side of pump. All filters feature a die-cast aluminum head which is anodized and painted. Standard pipe-to-hose barbs are used for installation. Inlets/Outlets: 1/4" NPT, except 3/8" NPT on 660 series .
Part No: 660R-RAC-02
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring->Aqua Lantern Solar-Lighted Marker Buoys
The Aqua Lantern Solar Lighted Buoy is a highly visible, 20" marker buoy by day that illuminates at night. It uses a watertight solar generator during daylight hours to charge 4, 1. 2V rechargeable batteries that power 5 super bright LED’s (Light Emitting Diodes).
Part No: AL20YEL
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->#205 Fast Hardener
It is used in a majority of situations, at lower temperatures and to produce a rapid cure that develops its physical properties quickly at room temperature. When mixed with the 105 Resin in a five-part resin to one-part hardener ratio, the cured resin/hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and coating properties. Mini Pump Kit is a must for precise metering of all group sizes of WEST SYSTEM resins and hardeners.
Part No: 205-C
|
|
|
|
Home -> Engine Systems -> Engine Instruments
Tachometer/Hourmeter, 7000 Universal Outboard Style: Professional Red. Size: 4". Weight: . 68 Lbs.
Part No: 34640
|
|
|
|
Home -> Anchor & Docking -> Anchors->Fortress Aluminum Anchors
Lightweight, fast-setting and reliable, this anchor gets fan mail Fortress anchors let you choose between two shank angles to provide outstanding holding power in two common seabed types—a 32° angle for sand, or a 45° angle for soft mud. Precisely machined interlocking components made from high tensile aluminum-magnesium alloy have no welds to weaken the metal. The alloy is extremely strong, corrosion-resistant, nonmagnetic and light. Style: Pivoting aluminum fluke .
Part No: FX-7
|
|
|
|
Home -> Engine Systems -> Engine Instruments
Dual Engine Synch Gauge Style: Professional Red. Size: 4". Weight: .
Part No: 34601
|
|
|
|
Home -> Engine Systems -> Engine Instruments
Please note: Image is representative of the Professional Red style and is not an image of the actual gauge.
Part No: 34632
|
|
|
|
Home -> Fishing -> Fishing Accessories->Fixed Angle Clamp On Rod Holders, SS
Clamps out of the way above a T-top rail allowing space for more rods and lends vertical/horizontal configuration versatility. Mirror polished silver or gold titanium nitride finish. Includes integrally-cast gimbal pin. 7/8", 1" and 1-1/16" OD .
Part No: 53600GA
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers->Advanced Car Rack System Base Racks
Save space inside—cartop your gear! Transporting all your favorite toys to the lake, ocean or mountains safely and securely is easy! Inno has been designing and manufacturing technologically advanced car racks for active sports enthusiasts for more than 30 years. Step 1: Determine the best rack system for your vehicle Choose a Base Rack that best suits the type of mounting method you have, i. e. The Base Factory Rack mounts bars to raised factory rails and features a sleek locking cover design.
Part No: INA-SR-BK
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Survivor Center Rope Tube Style Fenders
Survivor® fenders provide a new level of protection for your boat. Lab-tested for durability and performance, these fenders feature an innovative reinforced design and heavy-duty construction so they absorb collision better and last longer than standard fenders. In addition, with our exclusive built-in Micro Pump,™ these fenders have the advantage of being able to be inflated anytime, anywhere, without removing the fender or having to use additional pumps, needles or adapters.
Part No: 851034
|
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->2-Part Linear Polyurethane Enamel
A popular choice among many boatyard professionals as well as do-it-yourself boat owners who want superb gloss and durability. Pros spray it, yet the Sterling Brushing System captures the same look, thanks to its unique flow properties. Sterling brushing system: Pick a color base, mix 2:1 with U-2964. Add a dash of U-2900 accelerator in cool weather. Thin about 25% with U-2965. Apply on nonskid surfaces with low-nap foam rollers and tip several times. Apply with premium China bristle brush.
Part No: U-3656 QT
|
|
|
|
Home -> Anchor & Docking -> Anchors->Stowaway Anchor Bags
Rugged Cordura bags with Velcro fasteners are built to survive tough, regular use. Fit Fortress or Guardian anchors. Holds an anchor and 6' of chain (sold separately).
Part No: SFX85
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Fuel & Air Filters->Alarm Sensor 12/24V
Alarm is triggered when water content reaches problematic levels. 2” gauge, water detection module, with light and audio alarms and probe. Runs on 12V or 24V DC.
Part No: RK 20726
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers -> Rope Clutches->XAS Powerclutches
Positive one-way locking clutches for easy release and relocking Reliable, lightweight, and powerful enough to handle high loads with outstanding line control. Features improved lever action, soft-feel handles for comfort, excellent line gripping and improved release. Application: Racers up to 27' and cruisers up to 35' . Height: 2-3/4" (69mm) . Length: 5-3/16" (134mm) . Width: Single: 1-1/2" (39mm); Double: 2-9/16" (65mm); Triple: 3-5/8" (91mm) .
Part No: XAS0612/2
|
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->2-Part Linear Polyurethane Enamel
A popular choice among many boatyard professionals as well as do-it-yourself boat owners who want superb gloss and durability. Pros spray it, yet the Sterling Brushing System captures the same look, thanks to its unique flow properties. Sterling brushing system: Pick a color base, mix 2:1 with U-2964. Add a dash of U-2900 accelerator in cool weather. Thin about 25% with U-2965. Apply on nonskid surfaces with low-nap foam rollers and tip several times. Apply with premium China bristle brush.
Part No: U-3073 QT
|
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->2-Part Linear Polyurethane Enamel
A popular choice among many boatyard professionals as well as do-it-yourself boat owners who want superb gloss and durability. Pros spray it, yet the Sterling Brushing System captures the same look, thanks to its unique flow properties. Sterling brushing system: Pick a color base, mix 2:1 with U-2964. Add a dash of U-2900 accelerator in cool weather. Thin about 25% with U-2965. Apply on nonskid surfaces with low-nap foam rollers and tip several times. Apply with premium China bristle brush.
Part No: U-4242 QT
|
|
|
|
Home -> Plumbing -> Freshwater Systems->Flexible Water Tanks
Flexible, light and form-fitting, these tanks use a PVC bladder inside a tough, abrasion-resistant nylon outer “envelope. ” Maintenance is easy because the inner bladder can be removed for cleaning and inspection. The bladder is slightly oversized so pressure is exerted on its nylon shell, rather than on the heat-welded seams. 1 1/2" 90° fill and 1/2" straight outlet fittings ready to install. Port Sizes: 1-1/2" 90° fill, 1/2" straight outlet . Vent: No .
Part No: 18033
|
|
|
|
Home -> Fishing -> Rods->Tough & Light Casting Rods
A light and sensitive rod, yet tough enough to land the big ones Daiwa's popular Light and Tough rods' unique design and construction makes them effortless to cast, with sensitivity to feel the lightest strikes. Yet they're plenty tough to handle heavy fish in heavy cover, thanks to powerful IM6 graphite blanks reinforced with Daiwa's Power Mesh graphite outer weave. Blank: High modulus IM6 graphite with Power Mesh® reinforcement. Reel Seat: Custom reel seats with blank exposed to the touch.
Part No: TL-701-5RB
|
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->2-Part Linear Polyurethane Enamel
A popular choice among many boatyard professionals as well as do-it-yourself boat owners who want superb gloss and durability. Pros spray it, yet the Sterling Brushing System captures the same look, thanks to its unique flow properties. Sterling brushing system: Pick a color base, mix 2:1 with U-2964. Add a dash of U-2900 accelerator in cool weather. Thin about 25% with U-2965. Apply on nonskid surfaces with low-nap foam rollers and tip several times. Apply with premium China bristle brush.
Part No: U-3074 QT
|
|
|
|
Home -> Seating & Covers -> Seating->Cape Cod Model 1000 Premium Fishing/Helm Chair Package
Take the help in comfort and styleThis chair's rugged, roto-molded polyethylene frame with self-draining seat provides long-lasting support and comfort. Premium package set includes the chair with Slider, full cushion set and a 15"H polished aluminum pedestal with 9"dia base. Durable vinyl cushions snap off for storage.
Part No: 3150
|
|
|
|
Home -> Plumbing -> Marine Sanitation
Significant improvements were made to the Models HC and HE to create the HF.
Part No: HF UPGRADE
|
|
|
|
Home -> Engine Systems -> Control Systems -> Control Cables->TFXtreme 3300 CC Performance Cables
3300 CC = 3" travel, 10–32 ends.
Part No: CC63340
|
|
|
|
Home -> Sailboat -> Downwind Poles & Cars -> Spinnaker Poles & Gear->Spinnaker Pole Slides
All slides are made of stainless steel with spring pin stops.
Part No: 73-32
|
|
|
|
Home -> Engine Systems -> Engine Instruments->Euro Series Instruments
For more than 50 years, Faria has lived up to its reputation as a producer of high-quality, long-lasting instruments. The immensely readable and durable instruments in the Euro series feature bold, bright white numerals against a non-glare black background. Sculpted white pointers and low-profile black aluminum bezels make for even greater readability. Features a perimeter-lit black dial and flat glass lens.
Part No: 32850
|
|
|
