Top Sellers
Furler Kit for Boat Length to 16', 500lb. SWL, 1/8" Max. Wire dia., 1/4" Pin dia., 2-1/2" Pin-to-Pin, 5/32" Furling Line dia. from HARKEN
Furl or set your jib from your cockpit Harken small boat furlers allow the sail to be set and furled from the cockpit, a critical convenience in many racing dinghies and trailerable sailboats. Constructed of Hardkote anodized Teflon-impregnated aluminum, they feature multiple stacked races of Delrin or Torlon ball bearings for smooth rotation under load. The jib’s luff wire must be properly seized to the sail, since it carries most of the headstay load. 434 furler for dinghies under 16ft. (4.
|
45lb. CQR Anchor, Boats 32'–58', 40-5/8"L x 14"W x 17"H from LEWMAR
The legendary Lewmar plow anchor stays put, won't breakA favorite among bluewater cruisers for its strength and performance in a wide range of bottom conditions. Excellent penetration in sand, weeds, rocks and mud. Trouble-free anchor roller stowage. Attach a trip line to the eye on the horn for easy break-out. Hinged shank prevents breakout during wind shifts. Forged steel construction. Lifetime warranty against breakage. Material: Galvanized Steel . Application: Sand, Rock and Grass .
|
RigTune Pro Digital Rig Tension Gauge from HARKEN
Old-fashioned spring gauges, like the Loos Pro, don’t provide repeatable numbers. This product does. Unlike spring-loaded gauges, the Harken Rigtune Pro measures rig tension to the nearest kilogram. A load cell records the pressure on one of the pins and the measurement is displayed on a simple, easy-to-read screen. The Rigtune Pro fits a specific range of rigging sizes, 2. As rigging is deflected over three pins on the back of the gauge, a load cell records the pressure on one of the pins.
|
Flat Cam Riser, 1"H from HARKEN
Harken Cam-Matic cleats are legendary for smooth operation when holding and releasing control lines. Three rows of Delrin ball bearings allow the jaws to open and close smoothly under the highest loads. Light springs allow the cleats to open freely, so the teeth do not have to be sharp which means that your line lasts longer. Use models with aluminum jaws for high loads, or when the line will be drawn through the teeth for adjustment.
|
Hatch - Ocean 60 Flat Base from LEWMAR
Well-engineered hatches with CE-certified quality materials and construction. Smoothly styled external hinge enables one-hand operation. Inside handles feature locks that cannot be forced from the outside. Flat base or 1'' flange base (pictured). 3-year warranty. Flat base cutout sizes: Ocean 10 - 10" x 10". Ocean 20 - 7-3/4"W x 13-1/2"L. Ocean 30 - 12-5/8"W x 17-3/4"L. Ocean 40 - 16-3/8" x 16-3/8". Ocean 44 - 17-3/16" x 17-3/16".
|
Cabin Hatch/Vent from LEWMAR
Designed to fit Lewmar hatches or to be mounted on deck, this vent features a built-in gasketed bung that makes it 100% watertight. The trim piece is available for thru-deck installations. Includes mounting screws. Type: Passive vent . Material: Acrylic composite . Dimensions: 2-1/4"H x 6-3/4" Dia. . Cutout Size: 3" .
|
Screen Kit Hinge from LEWMAR
Allows the aluminum framed screen included with Lewmar Trim and Screen Kits to be hinged for easier access to the hatch.
|
Replacement Ball Bearings for 150 Cam Cleat from HARKEN
Harken Cam-Matic cleats are legendary for smooth operation when holding and releasing control lines. Three rows of Delrin ball bearings allow the jaws to open and close smoothly under the highest loads. Light springs allow the cleats to open freely, so the teeth do not have to be sharp which means that your line lasts longer. Use models with aluminum jaws for high loads, or when the line will be drawn through the teeth for adjustment.
|
Circlips, Package of Five (5) from LEWMAR
Spares Kit, Single-Speed Winches For all single-speed winches less than 11 years old, includes 4 pawls, 4 pawl springs, 4 circlips. . Spares Kit, Two-Speed Winches For all two-speed and self-tailing winches to 16ST-66ST. Includes 2 circlips, 8 pawls, 12 pawl springs, 3 keys, 8 gear spindle sleeves, 2 collets . Spares Kit, Three-Speed Winches For all three-speed nonself-tailing winches to 65. Includes 4 circlips, 8 pawls, 18 pawl springs, 4 plungers, 6 plunger springs, 2 closing rings .
|
60mm Racing Fiddle Block with Becket & Cleat, 882lb. SWL, 12.4oz. from LEWMAR
For chafe-free, low-friction tackles. Sheave: Anodized aluminum alloy . Ball Bearings: Delrin® . Sheave Size: 2-3/8" (60mm) & 1-5/8" (40mm) . Line Dia. : 3/8" max. . Cheek Material/Finish: Anodized aluminum alloy . Shackle/Strap Type: Swivel with three-way locking, drilled-out head . Cleat: Model with cleat: adjustable arm, aluminum cam cleat .
|
Anchor Safety Strap from LEWMAR
18" long stainless steel; PVC coated with 4" bolt, nut and snap link Fits 1/4", 5/16" and 3/8" chain.
|
1-7/8" Brass Standard Hasp from ABI
Highly polished brass . Fixed eye (does not swivel). 1"w x 1-7/8"L. Padlock hole diameter 5/16" .
|
1/4" NPT X 3/8" Brass hose barb from MOELLER
1/4 NPT X 3/8" Brass Hose barbs with male threads.
|
3/8" NPT Aluminum hose barb from MOELLER
3/8 NPT X 3/8" Aluminum hose barb with male threads.
|
Spring Loaded Ring Pull, Square 2 x 2 3/8" from WEST MARINE
Spring-loaded ring immediately returns to flush when released. Type 304 stainless steel . Size: 2 x 2 3/8" .
|
|
from HARKEN, from LEWMAR, XL from, 8 from GILL, SWL from HARKEN
|
|
Home -> Foul Weather Gear & Jackets -> Foul Weather Gear -> Foul Weather Gear->Men's Pro Dinghy Salopettes
These Pro Dinghy Salopettes have been designed with a high-fit chest and back for greater protection from the wind and water. Abrasion-resistant reinforcement fabric extends from the knee to the hem, which is shaped to prevent it being caught when hiking out. Made using a 2-Dot™ waterproof, windproof and breathable material that is fully taped. 2 Dot ™ waterproof and breathable 2-layer fabric. High front and back with semi-elasticized waist . Articulated fit allows trouser to move with you.
Part No: BLACK-M
|
|
|
|
Home -> Foul Weather Gear & Jackets -> Foul Weather Gear->Women's Pro Top 4350W
It offers water and wind protection without weight or bulk for kayaking, dinghy or sporting keelboats that demand maximum agility. The Pro Top has a center zip opening for ease of use, a slim fit to reduce windage, and an easy access chest pocket designed for use with a buoyancy aid. Features elastic shoulder straps, Velcro® elasticized ankle closures and fully-taped seams. Imported. Classification: Dinghy/one design . Key Feature: Maximum water and wind protection with breathable comfort .
Part No: BLACK-14
|
|
|
|
Home -> Foul Weather Gear & Jackets -> Foul Weather Gear -> Foul Weather Gear->Men's Pro Dinghy Salopettes
These Pro Dinghy Salopettes have been designed with a high-fit chest and back for greater protection from the wind and water. Abrasion-resistant reinforcement fabric extends from the knee to the hem, which is shaped to prevent it being caught when hiking out. Made using a 2-Dot™ waterproof, windproof and breathable material that is fully taped. 2 Dot ™ waterproof and breathable 2-layer fabric. High front and back with semi-elasticized waist . Articulated fit allows trouser to move with you.
Part No: BLACK-XL
|
|
|
|
Home -> Foul Weather Gear & Jackets -> Foul Weather Gear -> Foul Weather Gear->IN7J Inshore Sport Jacket
Lightweight jacket looks good onboard or in town Casual multi-purpose performance jacket offers lightweight protection that feels good and looks good in town, on the trail and onboard. A good choice for warm weather boaters who are looking for breathable, waterproof protection that won't slow them down. It's made of a highly breathable two-layer laminate material with a Teflon durable water-resistant finish and fully taped seams to keep you dry. Internal zip pocket and cargo pocket. Imported.
Part No: SILVER/DARK GREY-XL
|
|
|
|
Home -> Foul Weather Gear & Jackets -> Foul Weather Gear -> Foul Weather Gear->Women's Dinghy Salopettes
Ideal for dinghy or sporting keelboats that demand maximum agility. You’ll stay dry without overheating thanks to the breathable waterproof fabric. Waterproof, polyurethane-coated nylon fabric is reinforced in the seat and knees to endure abrasion. The bibs feature elastic in the shoulder straps, waist and cuffs ensures that you can bend, twist and stand without restriction. Coordinated for 4340 Dinghy Smock . Elasticized velcro shoulder straps . High front and back for greater protection .
Part No: BLACK-8
|
|
|
|
Home -> Foul Weather Gear & Jackets -> Foul Weather Gear -> Foul Weather Gear->Men's Pro Dinghy Salopettes
These Pro Dinghy Salopettes have been designed with a high-fit chest and back for greater protection from the wind and water. Abrasion-resistant reinforcement fabric extends from the knee to the hem, which is shaped to prevent it being caught when hiking out. Made using a 2-Dot™ waterproof, windproof and breathable material that is fully taped. 2 Dot ™ waterproof and breathable 2-layer fabric. High front and back with semi-elasticized waist . Articulated fit allows trouser to move with you.
Part No: 4351-14-2X
|
|
|
|
Home -> Sailboat -> Blocks->ESP Blocks
Designed to handle the high loads generated by modern racing and cruising boats, ESP blocks feature axle bearings to ensure smooth, hitch-free performance under high load and heavy winds. Sheave: Long-glass engineered plastic, except lockoff: aluminum. Bearings: Contained-axle sleeve and carbon-black Torlon ball bearings. Sheave Size: 3" (76mm). Line Diameter: 3/4".
Part No: 6078
|
|
|
|
Aluminum alloy sheave and dual Torlon® ball bearing races for higher working loads. Sheave: Anodized aluminum alloy . Ball Bearings: Torlon® Sheave Size: 2 3/8" (60mm) . Line Dia. : 7/16" max. . Cheek Material/Finish: Anodized aluminum alloy .
Part No: 29901611
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Big Boat Track & Accessories
Harken’s Big Boat Traveler Track is available in low-beam and high-beam configurations.
Part No: 3154.2.1M
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports->Surface SKYScreens
New screen and shade solution provides the ultimate in heat and light reflection with bug free ventilation for onboard comfort. Combines a retractable hatch shade and flyscreen system in a low-profile styled cassette. Made in extruded polymer and comes with integral hatch liner option, matching hatch corner radii and in three sizes available with round hatch adapter. Installation is simple to fit with four one piece corner mounted screws with integral screw caps . Available in white or beige.
Part No: SFSS-30-W
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Silicon Bronze Lag Screws - Bulk Packs
Silicon Bronze - the generic term used for various types of copper-silicon alloys. The properties of the alloy; a high percentage of copper, and small amounts of silicon, manganese or aluminum added for strength.
Part No: 2382C
|
|
|
|
Home -> Sailboat -> Blocks->Snatch Blocks
Features include 15-5 PH stainless shackle and attachment bolt for strength, soft PVC cheeks that prevent damage to decks and eliminate clatter, cast 300 series stainless steel hasp and hardware, stainless roller bearings for smooth operation. The RF6741 blocks have removable aluminum sheaves, midrange (RF6710, 6711, 6720, and 6721) feature Acetal sheaves, and big boat 6751 sheaves are removable stainless steel. Black. Cheek Material/Finish: Soft PVC. Bearings: Stainless needle bearings.
Part No: RF6721
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Small Boat Captive Ball (CB) Traveler Cars
These lightweight, solid aluminum and compact captive ball (CB) travelers are built to handle very high loads. Captive ball bearings let you roll the cars on and off the track without using a ball loader. Boat Size: Dinghies, multihulls, to small offshore boats. Material: One-piece solid aluminum . Shackle: Pivoting toggle models—fasten control blocks directly to post without needing a shackle. Sheave: Fixed sheave models—mainsheet loads 40° or less from vertical.
Part No: 2729
|
|
|
|
Home -> Safety -> Life Jackets -> Watersports Life Jackets->High-Collar Water Sport Vest
The right stuff for the right enthusiast The High-Collar Water Sport Vest is strength-tested to 100mph meaning it has been designed, tested and approved to hold up to the rigors of the most demanding watersports such as jet-skiing, wakeboarding and water-skiing. Comfortable enough to wear all day, the neoprene-lined fitted collar enhances comfort and head support and the large 3-belt system allows for an adjustable, secure fit. Includes a convenient internal storage pocket.
Part No: MV4600 RCB3XL
|
|
|
|
Home -> Safety -> Life Jackets -> Watersports Life Jackets->High-Collar Water Sport Vest
The right stuff for the right enthusiast The High-Collar Water Sport Vest is strength-tested to 100mph meaning it has been designed, tested and approved to hold up to the rigors of the most demanding watersports such as jet-skiing, wakeboarding and water-skiing. Comfortable enough to wear all day, the neoprene-lined fitted collar enhances comfort and head support and the large 3-belt system allows for an adjustable, secure fit. Includes a convenient internal storage pocket.
Part No: MV4600 YCB3XL
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Electrical Eng Parts
equivalent Replaces: 392133, 585061, 386591.
Part No: 18-5645
|
|
|
|
Home -> Engine Systems -> Engine Parts
**CarburetorKit|**CarburetorKit.
Part No: 18-7751
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Manual-Labor Seloc|**Manual-Labor Seloc.
Part No: 18-04600
|
|
|
|
Home -> Engine Systems -> Engine Parts
Seloc Labor Manual.
Part No: 18-04550
|
|
|
|
Home -> Paint & Maintenance -> Zinc Anodes -> Shaft/Prop Nut Anodes->Canada Metal - Zinc Prop Nut Anodes
The Martyr two-part prop-nut anode provides reliable corrosion protection for your valuable outdrive, outboards and propellers. Complete sets include the bronze fastener. Secured with a locking pin and special nylon patch hex fastener. Streamlined prop-nut anode is easy to install.
Part No: CMPNHZC06
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Survivor Series Fenders
.
Part No: 857034
|
|
|
|
Home -> Safety -> PLBs, EPIRBs, Life Rafts, Survival -> Survival Supplies
There's an easy-fit attachment for an optional locator light and external pockets allow instant access to EPIRB and GPS for quick activation. Stow in easy-access waterproof locker until necessary to use . Internal pockets and elastic daisy chain organizer . Record equipment inventory on external, waterproof card for quick reference . Constructed of rugged, water-resistant fabric; 1250 denier coated nylon exterior, 200 denier coated nylon liner with bias tape-finished main compartment seams .
Part No: 2272
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Filters & Chemicals->Watermaker Accessories & Parts
Watermaker Accessories & Parts.
Part No: 8012610
|
|
|
|
Home -> Safety -> Man Overboard Gear
Includes a fiddle block, a single block with carabiner, 65' of 3/8" dacron braid and a nylon storage bag.
Part No: W-TACKLE 3:1
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->2-Part Linear Polyurethane Enamel
A popular choice among many boatyard professionals as well as do-it-yourself boat owners who want superb gloss and durability. Pros spray it, yet the Sterling Brushing System captures the same look, thanks to its unique flow properties. Sterling brushing system: Pick a color base, mix 2:1 with U-2964. Add a dash of U-2900 accelerator in cool weather. Thin about 25% with U-2965. Apply on nonskid surfaces with low-nap foam rollers and tip several times. Apply with premium China bristle brush.
Part No: U-1003 QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->2-Part Linear Polyurethane Enamel
A popular choice among many boatyard professionals as well as do-it-yourself boat owners who want superb gloss and durability. Pros spray it, yet the Sterling Brushing System captures the same look, thanks to its unique flow properties. Sterling brushing system: Pick a color base, mix 2:1 with U-2964. Add a dash of U-2900 accelerator in cool weather. Thin about 25% with U-2965. Apply on nonskid surfaces with low-nap foam rollers and tip several times. Apply with premium China bristle brush.
Part No: U-1005 QT
|
|
|
|
Home -> Sailboat -> Downwind Poles & Cars
This product represents the cutting edge in spinnaker pole end fitting technology. Designed for high strength, very low weight and resistance to wear and corrosion the Ultra Series composite end fitting is perfect for aluminum or carbon fiber spinnaker poles and whisker poles. It is identical to the "UXP" piston style end fitting with the added feature of an internal trigger which makes it ideal for racing and use on carbon poles. Features: An internal trip. 5" pole.
Part No: 304061
|
|
|
|
Home -> Electronics -> Boat Instruments -> Instrument Accessories->G-Series Highspeed Patch Cables
Seatalk Highspeed Patch Cables.
Part No: E06056
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Electrical Eng Parts
Has push to choke" feature .
Part No: 859659Q1
|
|
|
|
Home -> Ventilation -> Bilge Blowers->12V Marine Blowers
This allows a very neat installation on an engine room bulkhead. Flexmount Blowers are also of radial design but are installed by attaching a mounting collar around the motor (which is supplied with the blower) to any convenient solid surface. They can be rotated inside the collar to allow the shortest ducting lengths and most convenient routings in confined spaces. Approvals: USCG, ISO 8846/9097 . Universal flexmount bracket lets outlet face any direction; corrosion-resistant construction .
Part No: 34739-0010
|
|
|