Top Sellers
Furler Kit for Boat Length to 16', 500lb. SWL, 1/8" Max. Wire dia., 1/4" Pin dia., 2-1/2" Pin-to-Pin, 5/32" Furling Line dia. from HARKEN
Furl or set your jib from your cockpit Harken small boat furlers allow the sail to be set and furled from the cockpit, a critical convenience in many racing dinghies and trailerable sailboats. Constructed of Hardkote anodized Teflon-impregnated aluminum, they feature multiple stacked races of Delrin or Torlon ball bearings for smooth rotation under load. The jib’s luff wire must be properly seized to the sail, since it carries most of the headstay load. 434 furler for dinghies under 16ft. (4.
|
RigTune Pro Digital Rig Tension Gauge from HARKEN
Old-fashioned spring gauges, like the Loos Pro, don’t provide repeatable numbers. This product does. Unlike spring-loaded gauges, the Harken Rigtune Pro measures rig tension to the nearest kilogram. A load cell records the pressure on one of the pins and the measurement is displayed on a simple, easy-to-read screen. The Rigtune Pro fits a specific range of rigging sizes, 2. As rigging is deflected over three pins on the back of the gauge, a load cell records the pressure on one of the pins.
|
Flat Cam Riser, 1"H from HARKEN
Harken Cam-Matic cleats are legendary for smooth operation when holding and releasing control lines. Three rows of Delrin ball bearings allow the jaws to open and close smoothly under the highest loads. Light springs allow the cleats to open freely, so the teeth do not have to be sharp which means that your line lasts longer. Use models with aluminum jaws for high loads, or when the line will be drawn through the teeth for adjustment.
|
Replacement Ball Bearings for 150 Cam Cleat from HARKEN
Harken Cam-Matic cleats are legendary for smooth operation when holding and releasing control lines. Three rows of Delrin ball bearings allow the jaws to open and close smoothly under the highest loads. Light springs allow the cleats to open freely, so the teeth do not have to be sharp which means that your line lasts longer. Use models with aluminum jaws for high loads, or when the line will be drawn through the teeth for adjustment.
|
Spinnaker Pole Car, Track #2720, 900sq.ft. Max. Sail Area, 1125lb. SWL from HARKEN
Now with captive ball bearings, which eliminates the need for a ball-bearing loader during installation or removal from track. These cars run freely, fit low-beam traveler track and are easy to adjust under any load.
|
Hi-Load Ti-Lite Car, Torlon Bearings, 850lb. SWL from HARKEN
These lightweight, solid aluminum and compact captive ball (CB) travelers are built to handle very high loads. Captive ball bearings let you roll the cars on and off the track without using a ball loader. Boat Size: Dinghies, multihulls, to small offshore boats. Material: One-piece solid aluminum . Shackle: Pivoting toggle models—fasten control blocks directly to post without needing a shackle. Sheave: Fixed sheave models—mainsheet loads 40° or less from vertical.
|
57mm Black Magic AirBlock, High-Load Strap Head with Becket, 2,500lb. SWL, 3.6oz. from HARKEN
Strong, lightweight aluminum blocks for offshore boats Used for sheets, halyards, running backstays and control lines on offshore boats, these strong, lightweight blocks are made of sculpted aluminum with Torlon rollers and carbon black balls for strength and UV protection. Cheek Material/Finish: 6160-T6 Hardkote anodized aluminum . Sheave Size: 57mm (2-1/4") . Construction: Three fasteners for quick disassembly. Plastic isolators separate dissimilar metals. Three-way head system.
|
Delrin Sheave, 1/2" Max. Line Dia., 1-7/16" OD, 3/8" ID, 5/8" Width from SCHAEFER
Schaefer sheaves are designed to be compatible with Schaefer products, and are not intended for use in other manufacturer's blocks. Delrin sheaves are injection molded with UV inhibitors and monitored molding cycles for a stronger product.
|
29mm Carbo Clew Block Assembly from HARKEN
From the folks who invented ball bearing blocks, this line of blocks boasts an excellent strength-to-weight ratio. 29mm doubles and triples feature a U-lock to hold the swivel in the front or side position, or allow it to spin freely. Use the 40mm blocks for jib and mainsheet systems on high-performance dinghies, and for high-load control lines on small keelboats. The 57mm blocks have an enormous working range that makes them ideal for main and jib sheets, spinnaker halyards and control lines.
|
Winch Service Kit from HARKEN
Contains 10 pawls and 10 springs.
|
|
|
|
|
Midrange Four-Hole Eyestrap from HARKEN
Forged eyestraps are extremely strong and their smooth shape won’t chafe line. Stainless steel . 6000lb. Breaking load.
|
300 Series Fairlead Block, Fixed Style, 2-7/32" x 3/4" from SCHAEFER
Same as the Schaefer 200 Series fairlead blocks, but with twice the working load. Use #10 fasteners. Configuration: Lead block. Sheave: UV-stabilized white Delrin®. Ball Bearings: Delrin. Sheave Size: 1-7/16" (37mm). Line Diameter: 7/16". Cheek Material/Finish: Polished stainless.
|
Cabin Hatch/Vent from LEWMAR
Designed to fit Lewmar hatches or to be mounted on deck, this vent features a built-in gasketed bung that makes it 100% watertight. The trim piece is available for thru-deck installations. Includes mounting screws. Type: Passive vent . Material: Acrylic composite . Dimensions: 2-1/4"H x 6-3/4" Dia. . Cutout Size: 3" .
|
|
from HARKEN, from SCHAEFER, from LEWMAR, SWL from HARKEN, M from GILL
|
|
Home -> Engine Systems -> Engine Parts->Impeller Repair Kits for Outboards
PUMP, WATER KIT.
Part No: 18-3147
|
|
|
|
Home -> Sailboat -> Blocks->M-Series Blocks
Computer-machined aluminum construction maintains sideplate strength while minimizing weight, giving these blocks an incredible strength-to-weight ratio and a distinctive, clean look. Torlon™ rollers and Delrin™ ball bearings in the sheave handle high loads with low friction. An excellent alternative for sailors interested in a lightweight choice. Sheave: Aluminum. Ball Bearings: Delrin.
Part No: M66-05
|
|
|
|
Home -> Sailboat -> Blocks->72mm Synchro Blocks
Lewmar's Synchro blocks are more efficient, less expensive Lewmar's Synchro blocks combine geometry, sheave ratios and a unique free spin bearing, to deliver performance that’s comparable to ball and roller bearing blocks used in pro racing—at a more affordable price. Synchro blocks provide the optimal ratio between line size, sheave diameter and the interface between rope and sheave. This new range of blocks transforms performance, not only by improving efficiency, but also speed and handling.
Part No: 29927203
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Battcar Batten Traveler Systems, System B Components
Add a lazy jack system, and raising or lowering your mainsail becomes a single person operation. Battcar systems also improve sailing performance, because they do not require the sail to be cut flat, or reduce the size of the roach, as with other systems. They make mainsail handling safer, by allowing you to raise or lower the sail with practically no effort at all, even with the sail powered up. At the inboard end of every batten, special ball bearing or slider Battcars move along the track.
Part No: 3848
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Battcar Batten Traveler Systems, System B Components
Add a lazy jack system, and raising or lowering your mainsail becomes a single person operation. Battcar systems also improve sailing performance, because they do not require the sail to be cut flat, or reduce the size of the roach, as with other systems. They make mainsail handling safer, by allowing you to raise or lower the sail with practically no effort at all, even with the sail powered up. At the inboard end of every batten, special ball bearing or slider Battcars move along the track.
Part No: 3847
|
|
|
|
|
2-Year DOP Fr 1500 To 1999. 99|2-Year DOP Fr 1500 To 1999.
Part No: 1 DOP 1500-1999
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->57mm Carbo Ratchet Blocks
Control loaded lines with ease Lightweight Carbo Ratchets are available in 40mm, 57mm, and 75mm sizes. The 40mm blocks are perfect for jibsheets and spinnakers on small dinghies where size and weight are critical. 57mm and 75mm sizes have many configurations to fit jibsheets, spinnakers, and mainsheet systems on boats ranging from dinghies to large sportboats. The Cheek Block is also switch-controlled. The 40mm cam-arm versions work in ratchet mode only. Sheave Size: 1-9/16" (40mm).
Part No: 2139
|
|
![5 Series Block, Double, Stainless Cheeks, 11.6oz. from SCHAEFER]( "5 Series Block, Double, Stainless Cheeks, 11.6oz. from SCHAEFER")
|
|
Home -> Sailboat -> Blocks -> Blocks->5 Series Universal Head Blocks
Used extensively for sheet blocks on small to mid-sized keelboats and as control line blocks for larger offshore boats. Suitable as mast-base or lead blocks on small to mid-sized boats. Universal three-way head. Black anodized aluminum or stainless cheeks. Stainless straps and posts. Sheave: UV-protected Delrin. Ball Bearings: Plain bearings . Sheave Size: 2" (51mm) . Line Dia. : 7/16" max. .
Part No: 505-25
|
|
|
|
Home -> Sailboat -> Blocks->57mm Carbo AirBlocks®
From the folks who invented ball bearing blocks, this line of blocks boasts an excellent strength-to-weight ratio. 29mm doubles and triples feature a U-lock to hold the swivel in the front or side position, or allow it to spin freely. Use the 40mm blocks for jib and mainsheet systems on high-performance dinghies, and for high-load control lines on small keelboats. The 57mm blocks have an enormous working range that makes them ideal for main and jib sheets, spinnaker halyards and control lines.
Part No: 2142
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->57mm Black Magic® AirBlocks®
Strong, lightweight aluminum blocks for offshore boats Used for sheets, halyards, running backstays and control lines on offshore boats, these strong, lightweight blocks are made of sculpted aluminum with Torlon rollers and carbon black balls for strength and UV protection. Cheek Material/Finish: 6160-T6 Hardkote anodized aluminum . Sheave Size: 57mm (2-1/4") . Construction: Three fasteners for quick disassembly. Plastic isolators separate dissimilar metals. Three-way head system.
Part No: 1963
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->Silicon Bronze Carriage Bolts - Bulk Packs
Silicon Bronze - the generic term used for various types of copper-silicon alloys. The properties of the alloy; a high percentage of copper, and small amounts of silicon, manganese or aluminum added for strength.
Part No: 2348D
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Small Boat Captive Ball (CB) Traveler Cars
These lightweight, solid aluminum and compact captive ball (CB) travelers are built to handle very high loads. Captive ball bearings let you roll the cars on and off the track without using a ball loader. Boat Size: Dinghies, multihulls, to small offshore boats. Material: One-piece solid aluminum . Shackle: Pivoting toggle models—fasten control blocks directly to post without needing a shackle. Sheave: Fixed sheave models—mainsheet loads 40° or less from vertical.
Part No: 2731
|
|
|
|
Home -> Sailboat -> Tiller & Rudder -> Tillers Extensions & Ac->Carbon Battlestick Tiller Extensions
Positive Grip Unique lightweight grip remains effective when wet. The ribbed finish on the tube provides additional positive grip along its full length, end stop is fitted for comfort and safety. Short tiller extensions have smaller grip diameters to match typically smaller hands. Urethane Universal Joint High-grade, UV-resistant urethane provides smooth, uniform articulation and flexibility in all directions for a quick and firm response. Snap-on base cover allows quick fitting and removal.
Part No: RF3137C
|
|
|
|
Home -> Engine Systems -> Engine Parts
Wireless Remote Trolling Motor Foot Pedal.
Part No: 8M4000952
|
|
|
|
Home -> Boats & Motors -> Kayaks & Canoes
Designed to mount through scupper holes of most sit-on-top kayaks, this dolly features quick-release 10" x 4" pneumatic tires. Frame and tires disassemble into four pieces for compact storage. Includes two adjustable crossbars: 6"-11" and 11"-18". Frame is bright anodized aluminum. Weighs 8 pounds.
Part No: 061594
|
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Power Pack|**Power Pack.
Part No: 18-5794
|
|
|
|
Home -> Foul Weather Gear & Jackets -> Foul Weather Gear->Glideskin Top 4503
Designed as a protective thermal barrier, the Glideskin Top is extremely comfortable when worn next to the skin. The heat reflective properties reduce heat loss and help to protect against wind chill.
Part No: GRAY/BLACK-XS
|
|
|
|
Home -> Safety -> Man Overboard Gear
Features rock hard, cross-linked polyethylene outer shell . Molded-in rope holes. Black 3/8" polypropylene rope can be easily replaced. Will not rot or mildew. Unaffected by harsh weather extremes. Solas approved . 30 inch diameter size only.
Part No: HSO30T
|
|
|
|
|
Home -> Foul Weather Gear & Jackets -> Long Underwear & Rash Guards->Glideskin Top 4503
Designed as a protective thermal barrier, the Glideskin Top is extremely comfortable when worn next to the skin. The heat reflective properties reduce heat loss and help to protect against wind chill.
Part No: GRAY/BLACK-L
|
|
|
|
Home -> Foul Weather Gear & Jackets -> Foul Weather Gear -> Foul Weather Gear->Fisherman's Parka, Heavy Duty
Safety Work Gear Whether fishing or sailing, your crew will be safe in the stormy conditions of the world’s oceans with Stormline Neon-Yellow & Blue Safety Work Gear. The hard wearing and durable gear is used by fishing crews worldwide working in the most arduous conditions. Poly interior for extended comfort and warmth. Bright neon contrast safety coloring and reflective patches—you will be seen while wearing Stormline. Available with reinforced arms that stand up to crab/lobster pots.
Part No: BLUE-L
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Fender Covers (A-Series, F-Series, HTM-Series & AERE)
Master Fender Covers are specially designed to protect the topsides and hull from fender scuff and reduce the need for expensive gel coat repairs. They are made from a premium stain resistant, non-abrasive, loop-knit acrylic fabric, which is both durable and fade resistant. The HTM-Series (Hole Through Middle) comes in singles or doubles which are also reversible; they fit Taylor Made Big B™ and SuperGard™ fenders.
Part No: MFC-F10B
|
|
|
|
|
Home -> Foul Weather Gear & Jackets -> Long Underwear & Rash Guards->Glideskin Top 4503
Designed as a protective thermal barrier, the Glideskin Top is extremely comfortable when worn next to the skin. The heat reflective properties reduce heat loss and help to protect against wind chill.
Part No: GRAY/BLACK-XL
|
|
|
|
|
Home -> Foul Weather Gear & Jackets -> Foul Weather Gear -> Foul Weather Gear->Fisherman's Parka, Heavy Duty
Safety Work Gear Whether fishing or sailing, your crew will be safe in the stormy conditions of the world’s oceans with Stormline Neon-Yellow & Blue Safety Work Gear. The hard wearing and durable gear is used by fishing crews worldwide working in the most arduous conditions. Poly interior for extended comfort and warmth. Bright neon contrast safety coloring and reflective patches—you will be seen while wearing Stormline. Available with reinforced arms that stand up to crab/lobster pots.
Part No: BLUE-XL
|
|
|
|
|
Home -> Foul Weather Gear & Jackets -> Long Underwear & Rash Guards->Glideskin Top 4503
Designed as a protective thermal barrier, the Glideskin Top is extremely comfortable when worn next to the skin. The heat reflective properties reduce heat loss and help to protect against wind chill.
Part No: GRAY/BLACK-S
|
|
|
|
|
Home -> Foul Weather Gear & Jackets -> Foul Weather Gear->Fisherman's Parka, Heavy Duty
Safety Work Gear Whether fishing or sailing, your crew will be safe in the stormy conditions of the world’s oceans with Stormline Neon-Yellow & Blue Safety Work Gear. The hard wearing and durable gear is used by fishing crews worldwide working in the most arduous conditions. Poly interior for extended comfort and warmth. Bright neon contrast safety coloring and reflective patches—you will be seen while wearing Stormline. Available with reinforced arms that stand up to crab/lobster pots.
Part No: BLUE-2X
|
|
|
|
|
Home -> Foul Weather Gear & Jackets -> Long Underwear & Rash Guards->Glideskin Top 4503
Designed as a protective thermal barrier, the Glideskin Top is extremely comfortable when worn next to the skin. The heat reflective properties reduce heat loss and help to protect against wind chill.
Part No: GRAY/BLACK-M
|
|
|
|
|
Home -> Foul Weather Gear & Jackets -> Foul Weather Gear -> Foul Weather Gear->Fisherman's Parka, Heavy Duty
Safety Work Gear Whether fishing or sailing, your crew will be safe in the stormy conditions of the world’s oceans with Stormline Neon-Yellow & Blue Safety Work Gear. The hard wearing and durable gear is used by fishing crews worldwide working in the most arduous conditions. Poly interior for extended comfort and warmth. Bright neon contrast safety coloring and reflective patches—you will be seen while wearing Stormline. Available with reinforced arms that stand up to crab/lobster pots.
Part No: BLUE-M
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Fender Covers (A-Series, F-Series, HTM-Series & AERE)
Master Fender Covers are specially designed to protect the topsides and hull from fender scuff and reduce the need for expensive gel coat repairs. They are made from a premium stain resistant, non-abrasive, loop-knit acrylic fabric, which is both durable and fade resistant. The HTM-Series (Hole Through Middle) comes in singles or doubles which are also reversible; they fit Taylor Made Big B™ and SuperGard™ fenders.
Part No: MFC-F10N
|
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Spacer-Manifold|**Spacer-Manifold.
Part No: 18-1985
|
|
|
|
Home -> Seating & Covers -> Seating->Fold Down Pontoon Fishing Seat
High back pontoon fishing chair with fold down seat back. Heavy duty marine-grade vinyl . High-density Polyurethane foam. 100% plastic frame construction.
Part No: BM434LS-221
|
|
|
