Top Sellers
Honda Fuel Line Connector, Moeller 033501-10 from MOELLER
Moeller 033501-10: Male bayonet tank connector, 1/4" NPT, 1991 and newer. Moeller 033496-10: Male bayonet style tank connector with 1/4" NPT, brass. Moeller 033502-10: Bayonet style female tank connector, 3/8" barb, 1991 and newer.
|
|
|
12V Macerator Pump, 14A Draw from SHURFLO
Designed specifically for the marine environment with run dry premium impeller technology. 5" male thread to screw directly onto a tank flange. Type: Macerating flexible impeller gpm: 13 Macerates: Yes Self-Prime: 5' Material: Nylon body, nitrile impeller, stainless wear plate Port Sizes: Inlet: 1-1/2" barb and 1-1/2" NPT male; Outlet: 1" hose barb Dimensions: 3-3/8"H x 4-5/8"W x 11"L Innovative blade design ensures problem-free pumping Inlet port has both a 1.
|
Uni-Fid for Splicing Braid from NEW ENGLAND ROPES
Two sizes make for neater, smoother splices. One fid is for 1/4"–3/8" line; the other is for 7/16" and larger line. Packed in a plastic storage tube.
|
Air Dryer Dehumidifier from WEST MARINE
Cast off moisture, mold and mildew A built-in fan circulates dry, warm air within your boat to prevent mold and mildew. Designed for safe, continuous dockside operation, the spark-free Turbo Dryer draws less current than a 100W light bulb so it’s inexpensive to operate all year ‘round. Housing is anodized aluminum for corrosion resistance. 10"dia. x 4 1/2"H. 110V AC.
|
|
|
Twisted Pair Wire with Shield from ANCOR MARINE
Similar to Ancor duplex wire, except that the conductors are twisted and surrounded by a copper shield for extra protection against noise and electrical interference. Red/black conductors. Recommended by ABYC for DC wiring near compasses and other magnetically - sensitive devices. Sold per foot. Wire Type: Twisted Pair . Construction: Tinned Copper . Conductors (Color and # of): 1 Red, 1 Black . Color of Exterior Insulation: White . Shielding: Copper Shield . Approvals: UL, ABYC, CSA .
|
Calibrated Resin Pump Set from MAS EPOXY
For use with 1 quart, 1/2 gallon, 1 gallon, 4 gallon and 5 gallon size containers.
|
Rounded Oval, 8-1/2"W x 11-1/4"L x 5-1/4"D, 1" Flange, 1-1/2" Drain from AMBASSADOR MARINE
Made from 304 stainless steel and mirror-polished to a deep luster, these sinks incorporate SoundKOTE Noise Reduction Technology to reduce the unpleasant clanging associated with many metal sinks. Flanges permit over- or under-the-counter mounting. Low-Profile 90° drains fit standard 1"ID hose and are slanted to maximize drainage.
|
1"W x 8"L Tang from SCHAEFER
High-quality stainless steel tumbled and polished.
|
Step Pad, 10-3/4" x 5-1/4", Blue from LEWMAR
Maintain your footing under all conditions! Self-adhesive, diamond-patterned, nonskid pads are great for decks, steps, dinghy floors, personal watercraft, etc. They resist wear and tear, peeling, saltwater, fuels and chemicals. Pads have rounded edges and are precut to fit most common step sizes. Trim with scissors for a custom fit. Peel-and-stick installation. Sold in pairs.
|
SeaStar Helm Seal Kit from TELEFLEX
Replacement shaft seal kit HS5176 fits various post-1990 SeaStar 1. 4, 1. 7 (I), 2. 0, 2. 4 (II), SeaStar Pro and SeaStar helms.
|
Potable Water Holding Tank, 3 Gal. from TODD ENTERPRISES
1520) requirements. Standard Tanks feature a multiple port arrangement that enables use as a sanitation holding tank or for potable water storage. They include two 1 1/2" fill/drain ports and two 1/2" vent/supply ports. Designed for waste storage, each includes two 1 1/2" ports for inlet and drain and one 1/2" vent port. Both Standard and Heavy-Duty Tanks feature threaded NPT ports that are molded in to eliminate stress cracks and leaks. One year warranty.
|
Teak Binocular Rack 7X50 from SEATEAK
Teak Accessories for Cabin & Cockpit Using only plantation-grown teak, these fine accessories make life aboard more pleasant.
|
P-Trap Fuel Surge Protector from ATTWOOD
One combined product eliminates the need to install both a fuel line vent and a surge protector. Inertia of surging fuel drives the surge ball against upper seat, closing the large vent opening and limiting passage to smaller openings, which reduces fuel flow and minimizes spillage. Operates in any orientation within 45° of vertical. Baffles resist water intrusion during normal sea conditions and washdown. Constructed of glass filled polypropylene to withstand oil, gas, alcohol blended fuels.
|
|
from AWLGRIP, 10 from BOGS®, 1, 1-1, 8 from BOGS®, 11 from BOGS®
|
|
Home -> Electrical -> Batteries & Accessories
For twin engines and two banks of batteries. The house loads can be switched between port and starboard battery. The selector switch can also be used to parallel the batteries when in both positions. Engines: Twin . Battery Banks: Two . Battery Switches: Two, 701 On/Off and One 701S 1/2/Both/Off . Voltage: 48V DC . Continuous Amps: 200A (Selector) 275A (On/Off) . Intermittent Amps: 1250A Cranking, 455 Intermittent (On/Off), 1000A Cranking, 300A Intermittent (Selector) . Dimensions: 8.
Part No: 715-S
|
|
|
|
Home -> Shoes & Boots -> Leather Boat Shoes -> Women's Leather Boat Shoes->Women's Marina Mocs
Get comfort and style with these mocs featuring handsewn construction, stain- and water-resistant leather uppers and full grain leather sock lining for all-day underfoot comfort. High-traction, nonmarking rubber outsoles with Wave-Siping™ for sure-footed stepping about town and on deck. Black, White w/ Black Snake. Women’s half sizes: 6 - 10.
Part No: BLACK-10
|
|
|
|
Home -> Electrical -> Meters & Distribution->120V AC Main-Only Toggle Circuit Breaker Panels
Blue Sea Systems Panels reflect the quality and attention to detail that premier yacht designers and builders specify for the finest custom and production yachts, as well as commercial vessels worldwide. These fine panels are cut from heavy 1/8” 5052 aluminum alloy and undercoated with a MIL-C-5541C spec. immersion coating for a lifetime of corrosion resistance. Bright LED panel lights clearly indicate when circuits are on. Breaker panels include pre-wired buses and a set of 30 common labels.
Part No: 8079
|
|
|
|
Home -> Paint & Maintenance -> Zinc Anodes->Bravo III Prop Nut Anode System
Kit includes “D-size” prop-nut anode, brass locking shaft nut and self-locking stainless steel fastener.
Part No: CMPNDZF14UNS
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Dock Bumpers->Heavy Duty Dock Bumpers
The ultimate in durable docking protection. Dock Pro heavy-duty bumpers are ideal for rough conditions and are made from UV resistant, marine-grade vinyl. The straight-mount model affixes easily to flat surfaces and pilings and the corner-mount provides the same protection on right-angle sections. Both models have inflation valves for variable firmness. Material: Vinyl . Attachment Method: Screw Mount . Cross Section Shape: Molded Arch . Shock Absorption Mechanism: Air Cushion .
Part No: 45510
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting->Series 40 Navigation Lights
For powerboats and sailboats to 65'7" (20m). Screens are brushed stainless steel. Lights with Q-fit base can be removed without tools for easy servicing. *Tri-Color lights are for boats under sail only. **Strobes are considered distress signals in inland waters, and are illegal in offshore waters. ***Entire assembly can be removed without tools for trailering or storage. Mounting Hardware: 2-3 screws (sold separately) . 84A; 25W: 2A . Wiring Provisions: 5" wire pigtail .
Part No: 40400-7
|
|
|
|
Home -> Electrical -> Shore Power -> Adapters, Plugs & Outlets->Contoured Power Inlets
Styled to complement the smooth contours of today's decks, this power inlet is simple to install and features a protective rear safety enclosure that provides safe, reliable strain relief. Features Marinco's exclusive Easy Lock system. Corrosion-resistant plastic housing. UL Marine-listed. Colors: chrome and white.
Part No: 6343EL-B
|
|
|
|
Home -> Sailboat -> Rigging Products->Turnbuckle, Toggle/Swage
Lengths are measured from bottom of swage hole to pin center.
Part No: WM TS 091616
|
|
|
|
Home -> Sailboat -> Tiller & Rudder -> Rudder & Wheel Hdwr->Heavy Duty Rudder Gudgeons
These gudgeons are built for 1/2" pins. Use with heavy-duty transom gudgeon (Model 252221) and gudgeon pin (Model 252239). Each requires 1/4" RHMS.
Part No: 81-47
|
|
|
|
Home -> Seating & Covers -> Covers & Biminis -> Bimini Tops->Zippered Storage Boots for Bimini BoaTops
Keep your Bimini BoaTop® neatly stored when you are not on the boat. Boots feature one separating zipper for easy on/easy off, and are made of marine vinyl to last for years.
Part No: 63194
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Piston Kit|**Piston Kit.
Part No: 18-4011
|
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Tune Up Parts
**Piston Kit|**Piston Kit.
Part No: 18-4010
|
|
|
|
Home -> Shoes & Boots -> Waterproof Boots -> Boots->Men's Tradesman Boot - Mid - Black
With our forty years of shoe industry experience, we've strived to produce the most comfortable footwear for the most uncomfortable conditions, keeping your feet warm and dry — all day long. Whether it's the farm, the forest, a night on the town or on board the boat, our designs integrate ground-breaking function with style. Comfort rating from temperate to -40F. Aegis or ortholite antimicrobial removable sockliners. Chemical-resistant, slip-resistant and non-marking lug outsoles.
Part No: BLACK-11
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Equiplite Non Swivelling Connector
Non-Swiveling Connectors features a protective locking Velcro strap An anodized Hi-tensile Aluminum bobbin with a replaceable loop fitted in the center. Protective locking Velcro strap .
Part No: 5-3NS
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports -> Deck Hatches->Trim and Screen Kits
Give a finished look to your Lewmar hatch installation. Kits include an easy-to-clean white ABS interior trim with a leatherette finish, custom-fitted aluminum fly-screen, trim fasteners and screen retainers.
Part No: 367620252
|
|
|
|
|
Home -> Plumbing -> Marine Sanitation -> Head Parts->Service Kits & Parts for Manual Heads
.
Part No: 29101-0000
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring
Mooring system with dual-action latch makes connecting and releasing your mooring ring easy.
Part No: 48-750
|
|
|
|
Home -> Fishing -> Fishing Accessories->Clamp-On Center Rigger Mounts
Clamp-On Center Rigger Mounts allow you to troll with more lines in the water. Center Tele-Outrigger Systems include Clamp-On Center Rigger Mounts, 8' tele-outrigger, rigging kits and outrigger carry bag. Item 3738200 is the clamp-on mount only (upper right in photo) . Clamp-on mount fits TACO’s 8’ or 12’, 1 1/8” center, rigger poles . Items 3738218 & 3738192 contain the Gunnel Mt. Striker bases, Tele-Outriggers, & Rigging Kit . Installs easily on most T-tops . Mfr.
Part No: F16-0311C-1
|
|
|
|
|
Home -> Shoes & Boots -> Leather Boat Shoes -> Women's Leather Boat Shoes->Women's Marina Mocs
Get comfort and style with these mocs featuring handsewn construction, stain- and water-resistant leather uppers and full grain leather sock lining for all-day underfoot comfort. High-traction, nonmarking rubber outsoles with Wave-Siping™ for sure-footed stepping about town and on deck. Black, White w/ Black Snake. Women’s half sizes: 6 - 10.
Part No: BLACK-9
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper->Green Corps Fiber Disc
5" or 7" with 7/8" center hole, fit standard grinders and are used with Disc Pad Hub, Face Plate and Retainer Nut.
Part No: 01913
|
|
|
|
|
Home -> Shoes & Boots -> Waterproof Boots -> Boots->Men's Tradesman Boot - Mid - Black
With our forty years of shoe industry experience, we've strived to produce the most comfortable footwear for the most uncomfortable conditions, keeping your feet warm and dry — all day long. Whether it's the farm, the forest, a night on the town or on board the boat, our designs integrate ground-breaking function with style. Comfort rating from temperate to -40F. Aegis or ortholite antimicrobial removable sockliners. Chemical-resistant, slip-resistant and non-marking lug outsoles.
Part No: BLACK-10
|
|
|
|
Home -> Engine Systems -> Steering Systems->TFXtreme 4300 BC Performance Cables
TfXtreme's unique design assures smoothness and efficiency–with hardly any lost motion–even in the longest and most complex cable routings! This means superior feel at the control, in any boat–performance that had been considered "impossible". TfXtreme achieves the "impossible". Patent-pending splined core to achieves the impossible–easy movement and minimum lost motion.
Part No: CCX43020
|
|
|
|
Home -> Fishing -> Fishing Accessories->Bait Sentry™ Pumps
The Bait Sentry’s magnetically driven impeller moves large quantities of water and handles solid debris without motor damage. If the impeller locks up, magnets break free, saving the motor from burnout. 24-hour dry run time. Type: Bait tank pump . Inlets/Outlets: 3/4" NPT inlet, 3/4" Barb outlet (1100 GPH model has 1-1/8" barbed outlet) . Features: Includes dual port for easy washdown connections, continuous duty, ignition protected, Marine UL Listed . Warranty: Three years .
Part No: 1700-021-030
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Awlcraft 2000 (Professional Application Only)
This two-component, fast-drying urethane coating provides a long-lasting, buffable finish with excellent gloss and color retention. Do not use below the waterline.
Part No: F8020/1QTUS
|
|
|
|
Home -> Cordage -> Rigging Products->Link Tangs
High-quality stainless. Used with marine eyes or toggles to permit shroud adjustment.
Part No: 84-95
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->R&D Marine Engine Mounts
R&D Engine Mounts are designed to withstand the rigors of marine applications. In addition, they are soft vertically and laterally to isolate drive train vibrations from the hull. To help increase the longevity of the mounts, all steel parts are passivated and zinc plated to limit corrosion. The rubber element is covered by an oil shield to protect it from petroleum based products. R&D mounts are preloaded based on the combined engine and transmission weight to limit engine movement.
Part No: 800-021
|
|
|
|
|
Home -> Shoes & Boots -> Leather Boat Shoes -> Women's Leather Boat Shoes->Women's Marina Mocs
Get comfort and style with these mocs featuring handsewn construction, stain- and water-resistant leather uppers and full grain leather sock lining for all-day underfoot comfort. High-traction, nonmarking rubber outsoles with Wave-Siping™ for sure-footed stepping about town and on deck. Black, White w/ Black Snake. Women’s half sizes: 6 - 10.
Part No: BLACK-6 1/2
|
|
|
|
|
**T Ball #6, 1/4 In. Cable|**T Ball #6, 1/4 In.
Part No: TB01406
|
|
|
|
|
Home -> Shoes & Boots -> Waterproof Boots -> Boots->Men's Tradesman Boot - Mid - Black
With our forty years of shoe industry experience, we've strived to produce the most comfortable footwear for the most uncomfortable conditions, keeping your feet warm and dry — all day long. Whether it's the farm, the forest, a night on the town or on board the boat, our designs integrate ground-breaking function with style. Comfort rating from temperate to -40F. Aegis or ortholite antimicrobial removable sockliners. Chemical-resistant, slip-resistant and non-marking lug outsoles.
Part No: BLACK-8
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks
Chrome plated zinc alloy with sliding lock button. For door thickness 3/4 to 1-1/8 inches. Supplied with black plastic spacer for surface mounting. Bevel/Strike Type: Regular w/Box. Case Dimensions: 2-1/8 x 1-3/4 .
Part No: 1279DP0CHR
|
|
|
