Top Sellers
Twisted Pair Wire with Shield from ANCOR MARINE
Similar to Ancor duplex wire, except that the conductors are twisted and surrounded by a copper shield for extra protection against noise and electrical interference. Red/black conductors. Recommended by ABYC for DC wiring near compasses and other magnetically - sensitive devices. Sold per foot. Wire Type: Twisted Pair . Construction: Tinned Copper . Conductors (Color and # of): 1 Red, 1 Black . Color of Exterior Insulation: White . Shielding: Copper Shield . Approvals: UL, ABYC, CSA .
|
Calibrated Resin Pump Set from MAS EPOXY
For use with 1 quart, 1/2 gallon, 1 gallon, 4 gallon and 5 gallon size containers.
|
|
|
Rounded Oval, 8-1/2"W x 11-1/4"L x 5-1/4"D, 1" Flange, 1-1/2" Drain from AMBASSADOR MARINE
Made from 304 stainless steel and mirror-polished to a deep luster, these sinks incorporate SoundKOTE Noise Reduction Technology to reduce the unpleasant clanging associated with many metal sinks. Flanges permit over- or under-the-counter mounting. Low-Profile 90° drains fit standard 1"ID hose and are slanted to maximize drainage.
|
SeaStar Helm Seal Kit from TELEFLEX
Replacement shaft seal kit HS5176 fits various post-1990 SeaStar 1. 4, 1. 7 (I), 2. 0, 2. 4 (II), SeaStar Pro and SeaStar helms.
|
P-Trap Fuel Surge Protector from ATTWOOD
One combined product eliminates the need to install both a fuel line vent and a surge protector. Inertia of surging fuel drives the surge ball against upper seat, closing the large vent opening and limiting passage to smaller openings, which reduces fuel flow and minimizes spillage. Operates in any orientation within 45° of vertical. Baffles resist water intrusion during normal sea conditions and washdown. Constructed of glass filled polypropylene to withstand oil, gas, alcohol blended fuels.
|
Impeller, 18-3062 from SIERRA
Recommended replacement schedule is every 3 years for fresh water and every year for salt water Click to view a Sierra Impeller Application Chart (PDF) For further assistance, have your year & model information handy and call our Product Advisors at 1-800-BOATING.
|
CARB GASKET KIT from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Yamaha Carb Kit from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Replaces OMC P/N 378444 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
For Chrysler/Force, 89-817109A2 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
Johnson/Evinrude Outboard Starter, 120 to 140hp V4 (1985-99), 10 tooth drive gear from SIERRA
Sierra's new and remanufactured starters are the only marine starters that meet Marine UL standards. Sierra's remanufactured starters all have new solenoids, drives, bushings, brushes and springs. The bodies are powder coated for greater corrosion resistance. Sierra has entered an agreement with United Technologies to market their complete line of outboard starters and components. All are 100% load tested . Our remanufactured starters are covered by Sierra's customer satisfaction warranty .
|
10 Micron Replacement Filter Element for OMC 502905 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. Today’s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage.
|
Water Circulating Pump - #18-3581 - Chrysler Inbd # 3004886, 3619542, 3619859, 3745985 from SIERRA
Water Pumps The water pump is the heart of your inboard or I/O cooling system. All Sierra pumps are bidirectional and can be installed on reverse rotation engines. The pumps are also powder coated for additional protection. Includes mounting gasket. Pumps include brass bi-directional impellers, brass plugs and fittings, carbon resin seal, all mounting gaskets, stainless steel seal cup and spring, stainless steel back plate (where required), and powder coating for maximum corrosion protection.
|
30GPH Cartridge, Replaces Racor S3240 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
|
|
1, 1-1, Distributr from SIERRA, Gearset from SIERRA, Propshaft from SIERRA
|
|
The main features of these covers are: Bow and stern sections are separated into two halves. The sections are joined through the use of a 7mm single pull molded nylon zipper on both the port and starboard sides. Cover design incorporates a "console tube" section with two adjustable straps which lift and secure the cover halves up and over the console body and up under the T-top. The top edge of console tube incorporates an adjustable draw rope in both front and rear sections.
Part No: 74206OB
|
|
|
|
Home -> Seating & Covers -> Seating->Classic Helmsman Folding Seats
Helm Seat 28in White|Helm Seat 28in White.
Part No: 40128-01:02
|
|
|
|
Home -> Paint & Maintenance -> Winterizing & Storage->Dr. Shrink's Shrinkwrap
During long periods of storage, your uncovered boat is susceptible to damage from a number of sources–rain, snow, blowing dirt and debris, bird droppings, UV radiation and nesting birds and rodents. While a conventional cover or tarp offers your boat some protection from the elements, only a shrink-wrap cover gives it protection that’s 100% waterproof, impossible to blow off and that can withstand heavy loads of snow or rain.
Part No: DS-207298W
|
|
|
|
Home -> Cabinet & Deck Hardware -> Rail Fittings & Rub Rail->Stainless Steel Rub Rail
Fits a wide variety of vinyl profiles Hollow back (marine grade type 304) has concave back to fit rigid vinyl rub rails and provide added protection and chrome-like accent around entire boat. Most widely used stainless-steel inserts fit the largest variety of vinyl profiles on the market. Solid back stainless-steel rub rail provides premium heavy-duty protection and a polished finish for your boat.
Part No: S11-451SP20B
|
|
|
|
Home -> Engine Systems -> Engine Parts->Water Circulating Pumps
As the originator of the flexible impeller engine cooling pump, Jabsco has a reputation for quality, reliability and serviceability. These pumps can be fully serviced and restored to like-new condition with a simple service kit, thus avoiding costly replacement.
Part No: 43210-0001
|
|
|
|
Home -> Engine Systems -> Trim Tabs & Hydrofoils->Tilt/Trim Motors, Sterndrive Applications
Tilt/Trim Motors Sterndrive Applications.
Part No: 18-6770
|
|
|
|
Home -> Anchor & Docking -> Windlasses & Rollers->Tunnels for Electric Thrusters
Lewmar's range of high-quality, filament-wound GRP tunnels is manufactured to their specifications and comes in a variety of cut lengths.
Part No: 589303
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Tune Up Parts
Fits: For Chevrolet all V8 includes 482, 502, 540 CID (Except 348, 409 & Tall Deck Big Block .
Part No: 18-5494-1
|
|
|
|
Home -> Electrical -> Shore Power -> Adapters, Plugs & Outlets->Y-Adapters
Y-adapters let you split one shore power outlet between two power cords (You’re still limited to the rated amperage of the outlet. ) All Y adapters are locking and equipped with covers and sealing collars.
Part No: 165AY
|
|
|
|
Home -> Plumbing -> Marine Sanitation
Todd Waste Caddy A portable 29-gal. capacity waste removal system. Moves easily on pneumatic tires with plastic bearings. Features a vented cap and 10-foot, 1-1/2"dia. hose and gravity-assisted pump that forces out fluid by gravity for a more rapid transfer. Spring-loaded nozzle eliminates leaks . Bronze ball valve is located at the bottom of the tank . Constructed of cross-linked polyethylene for strength and durability .
Part No: P93-2402
|
|
|
|
Home -> Sailboat -> Winches->Ocean Series One- and Two-Speed Winches, Non-Self-Tailing
Racing sailors will appreciate the smooth operation and flawless performance developed through years of experience on the race course. A massive, all-bronze one-piece center stem supports stainless steel main shafts and gear spindles that lend exceptional strength. Bronze gear trains deliver smooth power; high-tensile bronze gears are machine cut to very high tolerances. Fewer moving parts means fewer problems and simpler maintenance. And Ocean’s unique grip pattern makes rope handling easy.
Part No: 49016032
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports -> Deck Hatches->Voyager Series Stainless-Steel Hatches
Durable and smooth high-grade 316 stainless-steel hatch with extruded aluminum base. Models with cutout sizes greater than 16-1/2" x 16-1/2" have a unique spring arm that allows them to open 180°. Patented locking tiedown assembly. 3/8" smoked acrylic lens. Type: Deck hatch . Material: 316 stainless lid, extruded aluminum base, smoked acrylic lens . Latches: Adjustable latches with locked vent position . Included Accessories: None; optional screen and trim ring .
Part No: S2670-10AX
|
|
|
|
Home -> Sailboat -> Headsail Furling -> Furling Accessories->Code Zero Furler Accessories
Code Zero Furler Accessories.
Part No: 3111
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains
**Shaft-Prop|**Shaft-Prop.
Part No: 18-2355
|
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Distributor|**Distributor.
Part No: 18-5483
|
|
|
|
Home -> Boats & Motors -> Kayaks & Canoes -> Kayak Accessories->Extreme Drysuit
Fabric: 210-denier 3-layer TriTon™ Waterproof & Breathable: Yes Neck Closure: Latex gasket with adjustable hook-and-loop Wrist Closure: Latex gaskets with adjustable hook-and-loop Ankle Closures: Latex drysocks with adjustable hook-and-loop Waist System: Pull cord with barrel lock Pockets: None Cordura® reinforced seat and knees Heavy-duty YKK® waterproof zipper Reflective tape on arms Yellow model has additional reflective piping.
Part No: 22501 XXY
|
|
|
|
|
2-Year DOP Fr 8000 To 8999. 99|2-Year DOP Fr 8000 To 8999.
Part No: 1 DOP 8000-8999
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains
**GearRepair Kit-Upper Unit|**GearRepair Kit-Upper Unit.
Part No: 18-2364
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-300-512
|
|
|
|
Home -> Engine Systems -> Steering Systems -> Hydraulic Steering
Tie bar kit for HC5342/HC5343.
Part No: HC5343
|
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Stator|**Stator.
Part No: 18-5855
|
|
|
|
Home -> Anchor & Docking -> Windlasses & Rollers
Preset stopping point on retrieval One-touch function to deploy and retrieve a preset length of rode Adjustable back lit display in feet, metres or fathoms Graphic LCD screen featuring intuitive user interface for simple operation Displays windlass speed and direction, plus battery voltage Safety lock to help protect against accidental windlass deployment Logs windlass operation hours to help ensure regular windlass maintenance Weather cover and black console.
Part No: P102944
|
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Starter-Outboard|**Starter-Outboard.
Part No: 18-6429
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-300-6
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Gen II Shaft Seal
The Gen II offers exclusive features that make it the premier shaft seal on the market. The Friction Ring assembly is mounted with a rigid connection hose and uses a carbon graphite sealing surface all encased by a durable copolymer housing. Built into the friction ring assembly is a cutlass bearing to ensure proper and constant alignment to the shaft. The Clamp/Pressure Assembly secures the assembly around the shaft, preventing the galling or damage to the shaft that can occur with setscrews.
Part No: G-200-412
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Gen II Shaft Seal
The Gen II offers exclusive features that make it the premier shaft seal on the market. The Friction Ring assembly is mounted with a rigid connection hose and uses a carbon graphite sealing surface all encased by a durable copolymer housing. Built into the friction ring assembly is a cutlass bearing to ensure proper and constant alignment to the shaft. The Clamp/Pressure Assembly secures the assembly around the shaft, preventing the galling or damage to the shaft that can occur with setscrews.
Part No: G-200-4
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains
**Gear Set|**Gear Set.
Part No: 18-2206-1
|
|
|
|
Home -> Fishing -> Fishing Accessories->Magnum 10HS and 5HS Downriggers
Smart, convenient design maximizes performance and minimizes space. Clutch/brake control provides a smooth descent of the weight while the 3-digit counter tells you when you’ve reached the desired depth. Magnum 10HS features a boom that telescopes between 24" and 53". Magnum 5 model has a fixed 24" heavy duty boom for controlling your downrigging lines. Type: Electric. /minute with 20lb. weight capacity. Features: Positive ion control; short stop weight retrieve.
Part No: 1902100
|
|
|
|
Home -> Cordage -> Anchor Line & Dock Line->Prespliced Mega Braid Dock Line
.
Part No: 59304-40-00080
|
|
|
|
Home -> Sailboat -> Tiller & Rudder->Stainless Dished Destroyer™ Wheels
These 5-spoke wheels are the latest addition to Edson’s line of Destroyer™ Wheels. Attractive, dished shape and newly-styled, straight hub. Tapered, hollow spokes. Lightweight 1" ovalized grip tubing is the industry standard for smooth wheel steering. 1" bore fits most Edson wheel shafts. Requires Wheel Nut fastener.
Part No: 645ST-32-5
|
|
|
