Top Sellers
1-7/8" Polished Brass Flush Ring Pull from ABI
Highly polished brass . Convenient flush-fitting ring pull for cabinets, small doors, and hatches. . 1-7/8"L x 1-1/2"w . Requires four #5 fasteners .
|
PE-1 Lexan Mast Pad Eye from FORESPAR
For use on our small poles. 1-3/4"H x 1-1/4" x 5/8"dia. ring. Same ring as supplied with 4-8 and 6-12 poles.
|
Acetal Thru-Transom Scupper from WEST MARINE
One-way rubber flapper valve and thru-hull fitting. For 1-1/2"ID hose. Overall length: 6-1/4". Installation hole size: 2". Max.
|
CP Zinc Cupboard Catch from PERKO
Chrome-plated zinc. . Supplied with box strike. . Measures: 1 1/2"W x 1 7/8"L . Requires #6 fasteners (not included). Made in USA.
|
|
|
Solid Brass Vertical Action Galley Pump from FYNSPRAY
Vertical plunger pump with a gracefully arched spout. 50 strokes per gallon. 1"diameter tube. Fits 1/2"–5/8" hose. Requires 8 1/2" clearance below counter surface; 9 3/4" above Material: Brass. Capacity: 50 strokes/gal. Dimensions: 9 3/4"H. Cutout Size: 1 1/8". Clearance: 8 1/2".
|
CP Zinc Sliding Window Stop from PERKO
Chrome-plated zinc with plastic cover on stopping plate. . Base measures 3/4"W x 1 7/8"L. . Requires #8 fasteners (not included). . Stopping plate length: 1 1/2'' . Made in U. S. A.
|
RailLight™ Clamp-On Solar-Powered Light from SIMPLY BRILLIANT
Solar-Powered Sol Lights™ RailLight™ charges all day and shines all night! Clamp this solar-powered portable light to any railing, coaming, stanchion, step, ladder or dock box for up to eight hours of light with just an eight hour charge of sunlight. Coated stainless steel finish resists corrosion. Comes with two clamps: one for round railings up to 1-1/4", and a transom clamp for up to 2" thickness. Dual 700mA rechargeable and replaceable NiCad batteries.
|
4.5" Stainless-Steel Pop-Up “Neat Cleat” from ATTWOOD
Retractable stainless steel cleats retract to only 1/2" above deck and have direct drainage to the bilge. Corrosion-free. Install easily. Hardware included. Functions: Drains to bilge with drainage receptacle. Requires 3/8" ID tube (not supplied) . Material: Stainless steel . Height: Lowered, 1/2"; Raised, 1-5/8" . Line Size: 1-1/4" line opening . Cutout Size: 7/8" hole saw size. Max.
|
Gusher 10 Pump from WHALE PUMPS
Die-cast, epoxy-coated, anodized alloy, synthetic neoprene rubber diaphragm and stainless steel. Removable stainless handle with lanyard. To complete the installation, select either the Aluminum or Plastic Thru-Deck Kit, which seal the installation against water intrusion and and give it a finished look. Nitrile Diaphragm Kit, AK3714, available through special order. Material: Anodized aluminum . Dimensions: 8"H x 4-1/8"W x 5-3/4"L . Port Sizes: 1-1/2" .
|
Nauta 9 Gallon Flexible Fuel Tank from IMTRA CORPORATION
Flexible gasoline tanks won't rust, don't rattle, are easy to tie down, easy to carry, and won't scrape your boat. The Nauta 9-Gallon flexible fuel tank features comfortable, molded carrying handles and rugged 840-denier nylon construction. Fitted with a 1 1/2'' pivoting fill and a capped and 1/4'' NPT hose barb. Measures 28 1/2'' x 17 1/2'' x 6 1/2''.
|
|
|
Gas Deck Fill Replacement Cap, Locking from PERKO
Includes grounding lug with screw and integral retainer for cap For 1 1/2" hose Impervious to gasoline.
|
CP Zinc Elbow Catch from PERKO
Chrome-plated zinc with stainless steel spring. . Measures: 1 1/8" x 9/16" . Requires #6 RH screws (Not included).
|
Transom Drain Tube & Plug from MOELLER
This nylon drain tube won't rot, bend or mildew, fits flush to your transom, and allows water to drain when your vessel is trailered. A rubber O-ring makes a watertight seal. Can be loosened with a flat-head screwdriver. Fits 1 1/8'' openings. Mounted with rivets or #8 fasteners.
|
|
from LEWMAR, 1, 1 1, 1-1, 1 from OUTDOOR TECHNOLOGIES, HE from GROCO
|
|
Home -> Engine Systems -> Engine Parts->Voltage Regulators
All voltage regulators have built in capacitators for high voltage spike protection.
Part No: 18-5710
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Replacement Parts and Service
Heads need to be properly maintained to ensure proper functioning Genuine Sealand parts Maintenance kitsTreatment kits.
Part No: 385230378
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass
Reactor - For Urethane 4Ga Base - MUST order 1 gallon with Urethane Base.
Part No: 4000-GR
|
|
|
|
Home -> Engine Systems -> Steering Systems->Clamp Blocks
Used as a standoff from the transom (outboards without tilt tubes) or a stringer (inboard model) for the steering cable.
Part No: SA27055P
|
|
|
|
Home -> Clothing Accessories -> Bags->BigCreek Backpack
The backpack that serious watersports enthusiasts love! The BigCreek is fully waterproof, has Watershed's easy to use airtight, watertight ZipDry® closure and two compression straps that get your gear packed in tight and compact, so you can easily stow it out of the way. It's nine adjustments points offer you a personalized fit. BigCreek's curved padded shoulder straps and beefy waist belt can be removed so you don't have any dangling straps when it's time to stow it. Made in the USA.
Part No: FGW-BC-RED
|
|
|
|
Home -> Sailboat -> Rigging Products->Quick Attach™ Stud & Jaw Turnbuckles
The advantage of "Quick Attach" over conventional fittings is the arrangement of the wedges on the outside of the cable which makes assembly much easier and allows different types of wire to be used with the same fitting. The Suncor Quick Attach Stud and Jaw Turnbuckle mechanical swage fitting allows very fast attachment to any type of cable (1X19, 7X19, or 7X7) using only simple tools. Working Load Limit (WLL) is determined by the WLL of the wire being used.
Part No: C0765-1309
|
|
|
|
Home -> Engine Systems -> Engine Parts
Replaces: 396141.
Part No: 18-5765
|
|
|
|
Home -> Sailboat -> Headsail Furling -> Furling Accessories
Before re-hoisting the bowman doesn’t need to remove the headsail from the luff grove, he just has to open the prefeeder and close it around the luff tape. To open, simply push the spring with your thumb, the jaws will open automatically. The prefeeder can be easily installed below any headsail foil or headsail reefing configuration. In the closed position, it ensures a smooth and easy sail hoist. Stainless-steel product benefiting from the Wichard know-how to offer the highest reliability.
Part No: 7485
|
|
|
|
Home -> Fishing -> Fishing Accessories->Stainless Steel Clamp-On Rod Holders
An attractive tapered style tube is fabricated to a fixes clamp constructed of 300 Series Stainless Steel in either horizontal or vertical mounting. Available in High Polish Stainless Steel or Gold finish. Includes a heavy duty white vinyl liner for rod protection. All Clamp on rod holders are sized for aluminum pipe, which is different from standard stainless tube.
Part No: 88184-1
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->60mm Control Blocks
.
Part No: 29901652
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Micron® Extra Antifouling Paint
Micron Extra incorporates Biolux™ along with cuprous oxide to achieve complete protection against shell, weed and slime fouling. This self-polishing process results in the constant, controlled delivery of biocides from freshly exposed paint film surface, and assures consistent, long-lasting performance and maximum efficiency. Micron Extra retains it’s antifouling effectiveness when hauled and can be relaunched without repainting. Multi-season, self-polishing protection with no paint build-up.
Part No: Y5693/QT
|
|
|
|
Home -> Fishing -> Fishing Accessories
Closed-cell EVA foam padding, with a tough, waterproof lycra polyester cover. Attached to the inside liner is a name and ID tag. Self-adjusting reel attachment straps prevent the harness from riding up, and provide the best pulling angle for maximum leverage. Molded rubber safety/grab handle is also double-stainless riveted and box-stitched into the back of the belt. All of the ultra heavy duty nylon web straps feature top quality, corrosion proof, “quick-release” nylon buckles or adjusters.
Part No: HARNESS1BLUE
|
|
|
|
Home -> Boats & Motors -> Inflatable Boats
Shelter your inflatable from dirt, sun and seagulls. Our marine-grade polyester boat covers offer fine durability, superior stain, water, mildew and UV resistance, and won’t shrink or stretch like many cotton covers.
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks->Compression Latches
Upgrade your plastic latches with our popular “D” ring design. For large doors and floor hatches. Coordinates with existing Southco slam latches. Exclusive “no rattle”, all stainless construction. Fits all 2. 5 inch holes. Excellent replacement upgrade.
Part No: 29221
|
|
|
|
Home -> Interior, Flags & Gifts -> Gifts -> Gifts & Specialty Items
Others bend, cast and attach the wire hung counterweight and check balance and swing. Village painters hand paint faces and important details. Apprentices do base paint and more mundane details. The distressed finish is the result of an old and proven system of combined layers of paint of slightly different composition. The final step is a hand rub with dark colored beeswax giving it the final finish and feel. In the manner of their antique predecessors, our balance toys are true originals.
Part No: TM044
|
|
|
|
Home -> Electronics -> Radars -> Radar Accessories->Power Mount & Power Mount Plus Accessories
*Universal mounts fit Furuno, JRC/Northstar, Koden, Lowrance, Sitex, Simrad, Nobeltec, Maptech 12–20" domes and 24" Lowrance domes.
Part No: PM-114LTDLX
|
|
|
|
Home -> Electronics -> Global Positioning Systems->GPS 18x Sensor
The GPS 18x is an OEM, high-sensitivity GPS sensor for use in automotive, fleet vehicle, and electronics applications that require a small, highly accurate GPS receiver. 4 inches in diameter and weighs just a few ounces, making it an ideal solution for applications where space is at a premium. All three versions of the GPS 18x come complete with non-volatile memory for storage of configuration information, a real-time clock and raw measurement output data for sophisticated customer applications.
Part No: 010-00321-34
|
|
|
|
These durable lightweight covers are ideal for protection on the mooring or in storage (not meant for trailering). Features a 70-Denier lightweight polyester fabric that’s the perfect blend of economy and simplicity.
Part No: 70282
|
|
|
|
Home -> Engine Systems -> Fuel Tanks->Reed Switch Sending Units
Direct OEM replacements for gasoline applications, calibrated for 240-33 ohm gauges. Stainless steel construction, with gasket and screws included.
Part No: 035767-10
|
|
|
|
Home -> Electronics -> Fishfinders -> Transducers and Accessories->XNT Transducers
Get more accurate readings at higher speeds!New transom mount transducer family with a hydrodynamic design for more accurate readings at higher speeds. Heavy-duty kick-up bracket and ratcheting running angle adjustment with lock down. Mounting hole pattern matches current transducers.
Part No: 710199-1
|
|
|
|
Home -> Fishing -> Fishing Accessories->Thruhull Bait Pumps
You won't have to worry about salt rushing out this pump! Nob-corrosive design will stand up to even the harshest environment Low amperage per gallon of water output Useful for boats with limited charging systems All pumps are whisper quiet, so you won't scare the fish away Direct thruhull mounting 3/4" female thread.
Part No: K-700
|
|
|
|
Home -> Sailboat -> Tiller & Rudder -> Tillers Extensions & Ac->Twist-Lock Tiller Extensions
Comfortable ball-grip tiller extensions for racing or cruising. Stainless steel quick release end fitting and socket receptacle.
Part No: 104016
|
|
|
|
Home -> Trailer & Parts -> Hitches, Winches & Jacks->Powerwinch Electric Trailer Winches Parts & Accessories
Extend the life of your Powerwinch with these replacement parts at a fraction of the cost of a new winch!.
Part No: P1088200AJ
|
|
|
|
Home -> Fishing -> Reels
One piece extruded aluminium frame. Excellent and very popular reels to suit most conditions from Abu Garcia. Triple cross wind and line out alarm. Ideal for beach and light boat applications. Full manufacturer's warranty .
Part No: 1115455
|
|
|
|
Home -> Engine Systems -> Engine Parts->Impeller Repair Kits for Outboards
.
Part No: 18-3386
|
|
|
|
Home -> Trailer & Parts -> Trailer Lighting -> Trailer Light Kits
Everything you need to retro fit your under-80"W trailer with submersible LEDsDesigned specifically to fit leading-brand trailers, these LED lights feature stylish good looks with reliability to match. A big improvement over old-style incandescents and an easy way to give an old trailer a new look. Left light: tail, stop, turn, side and rear reflector, red marker and a license plate illuminator. Kit includes new waterproof connector kit and new heavy-duty, reinforced housing assembly.
Part No: 283-4443-7
|
|
|
|
|
Home -> Fishing -> Fishing Accessories->Stainless Steel Clamp-On Rod Holders
An attractive tapered style tube is fabricated to a fixes clamp constructed of 300 Series Stainless Steel in either horizontal or vertical mounting. Available in High Polish Stainless Steel or Gold finish. Includes a heavy duty white vinyl liner for rod protection. All Clamp on rod holders are sized for aluminum pipe, which is different from standard stainless tube.
Part No: 88185-1
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Freshwater Pumps->Groco Service Kits and Repair Parts
Groco Replacement Parts and Service Kits We stock an extensive selection of parts and service kits for virtually all products. In addition, we can quickly get any part you need to repair your Jabsco, SHURflo, Raritan or Groco equipment directly from the manufacturer through our Special Order department. If you know the part number you need simply order the part using the Model or manufacturer's part number. If you don't know either number, please call us for assistance.
Part No: HF-C
|
|
|
|
Home -> Plumbing -> Bilge Pumps -> Electric Bilge Pumps->SHURflo Bilge Pumps
Built for demanding marine use, pumps feature permanent magnet motors, ABS plastic (380–1000gph models) or nylon housings (1500 and 2000gph models) and high-strength nylon impellers. Motors are water cooled for extended life. 380–1000gph models include 3' tinned wire leads. 1500 and 2000gph models come with 6' leads. 1500 and 2000gph models install easily with included swivel base. Type: Submersible centrifugal bilge pump .
Part No: 358-100-10
|
|
|
|
Home -> Plumbing -> Fittings & Valves->ARG-Series Strainer Parts & Repair Kits
ARG-Series Strainer Parts & Repair Kits Baskets: Stainless steel or nylon. Sight glass.
Part No: SS-85-G
|
|
|
