Top Sellers
CARB GASKET KIT from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Yamaha Carb Kit from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Replaces OMC P/N 378444 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
For Chrysler/Force, 89-817109A2 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
Lower Unit Seal Kit from SIERRA
Sierra 18-2623 OMC Gear Housing Seal Kit.
|
Water Circulating Pump - #18-3599 - Volvo #3851982-3, 3853850; Mercruiser #811841, 850399, 850399-1 from SIERRA
Water Pumps The water pump is the heart of your inboard or I/O cooling system. All Sierra pumps are bidirectional and can be installed on reverse rotation engines. The pumps are also powder coated for additional protection. Includes mounting gasket. Pumps include brass bi-directional impellers, brass plugs and fittings, carbon resin seal, all mounting gaskets, stainless steel seal cup and spring, stainless steel back plate (where required), and powder coating for maximum corrosion protection.
|
Johnson/Evinrude Outboard Starter, 120 to 140hp V4 (1985-99), 10 tooth drive gear from SIERRA
Sierra's new and remanufactured starters are the only marine starters that meet Marine UL standards. Sierra's remanufactured starters all have new solenoids, drives, bushings, brushes and springs. The bodies are powder coated for greater corrosion resistance. Sierra has entered an agreement with United Technologies to market their complete line of outboard starters and components. All are 100% load tested . Our remanufactured starters are covered by Sierra's customer satisfaction warranty .
|
30GPH Cartridge, Replaces Racor S3240 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
|
Sierra-Tube-Exhaust from SIERRA
Some larger V-8 engines that create a large amount of back pressure use exhaust tubes rather than bellows. This helps to relieve the excessive pressure and eliminate problems with premature bellows failure. In the past, the exhaust bellows would blow up like a balloon and cause the drive shaft bellows to rub against the yoke and U-joints causing holes in the bellows.
|
|
|
|
|
Prop Nut Kit, Yamaha 40-50HP from SIERRA
An excellent emergency item to carry in your toolbox, for those occasions when the prop nut is misplaced or lost.
|
Prop Nut Kit, Yamaha V4/V6 from SIERRA
An excellent emergency item to carry in your toolbox, for those occasions when the prop nut is misplaced or lost.
|
Exhaust Flapper Valve - 4" from SIERRA
Heavy duty rubber flapper valve keeps following seas from entering exhaust outlet when moving slowly or stopping.
|
|
|
|
from RONSTAN, from HARKEN, Pistonkit from SIERRA, Filterkit from SIERRA
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Primers, Undercoats & Non-Skid
Nonflammable, phosphoric acid-based formula deep cleans aluminum prior to welding, painting or subsequent treatments.
Part No: O73001/1GLUS
|
|
|
|
Home -> Engine Systems -> Control Systems->Morse Utility Control Cables
.
Part No: 018872-00-120.0
|
|
|
|
Home -> Anchor & Docking -> Anchors->Anchor Kits
Two economical kits to satisfy anchoring needs Basic Hooker Kit includes 5lb. Quick Set Anchor (with slip ring shank), 100' x 3/8"dia. nylon rode with thimble plus 4' x 1/4"dia. galvanized chain and two 5/16" shackles. Super Hooker Anchor Package includes Super Hooker 14lb. Anchor, 100' x 3/8"dia. nylon line, 6' x 1/4"dia.
Part No: 95102
|
|
|
|
Home -> Safety -> Fire Extinguishers -> Fixed Extinguishers->Manual Release Cable Kits
Select length according to application Includes stainless-steel cable, pull handle, safety pin, panel mount escutcheon plate, tie and instructions.
Part No: E-4209-20
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Tune Up Parts->Ignition Tune-Up Kits
Complete kits include cap and rotor, contacts and condenser if required. Tune-up kits have everything that the complete kits have, except for the cap.
Part No: 18-5247
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Polyethylene Dock Steps
Make climbing aboard easier! Durable, UV-resistant, white polyethylene steps have StepSafe non-slip pads for maximum slip protection. Wide 1-1/2" flange makes dock mounting easy. Washable surface cleans easily with soap and water. Handrail and mounting hardware sold separately.
Part No: 47100
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper->Gold Disc (FB) - 6", P500-Grit, 75 Pk
3M™ 255L Gold Film Discs are designed for use on marine paints, gel coat and primer systems that are tougher to sand. 3M™ 260L Gold Film Discs are designed for machine sanding in finer grades prior to compounding.
Part No: 01329
|
|
|
|
Home -> Sailboat -> Tiller & Rudder -> Tillers Extensions & Ac->Giant Stick Tiller Extensions
"Fat 1 ¼" diameter extension allows you to use a light grip for great feel and so your hand doesn’t get fatigued. 48" length is great both for the Laser and U20 sportboat. " Exceptional holding power in a super lightweight blockThe Series 60 is a good choice for Lasers and mainsheets on dinghies, Series 75 is sized for mainsheets on larger, powerful dinghies, skiffs and sportboats of all sizes, or for asymmetrical spinnaker sheets. Machined cheeks and sheave.
Part No: 102222
|
|
|
|
Home -> Cabin & Galley -> Stoves & Propane System
Comes complete with wall-mount bracket and 20'' pigtail. Pigtail has male POL fitting which screws to tank. 1/4'' male flare which connects to regulator.
Part No: 1211-1401
|
|
|
|
Home -> Electrical -> Chargers & Inverters -> Alternators and Regulators->6, 9 & 94-Series Alternator Pulleys
9-Series alternator pulleys are machined with rear spacer flange for use with Balmar small case 9-Series and large case 94-Series high-output alternators. Can be used with 6-Series alternators (may require some adjustment for pulley alignment).
Part No: 61-0020
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->Series 55 Ball-Bearing Orbit Blocks™
The precision design provides the optimum number of ball bearings in critically loaded areas, eliminates them in inactive areas and reduces ineffective mass, creating the "2-stage" bearing system for durability and low friction performance. The flexible Dyneema® rope link is a product of the latest trends in grand prix ocean racing and provides a more flexible, lighter weight and lower profile solution than traditional shackles. Sheave Size: 2-5/32" (55mm).
Part No: RF55521
|
|
|
|
Home -> Books & Videos -> Cruising Guides -> Pacific & Asia
South Pacific Anchorages by Warwick Clay Latest details of the harbors of the Pacific, south of the Equator between New Guinea and South America. Paperback. 8 1/2" x 11". 280 pgs.
Part No: 0852884826
|
|
|
|
Home -> Sailboat -> Sailboat Canvas -> Sail Covers & Sheet Bag->Spinnaker Bags
A great solution for fast and easy spinnaker hoisting. The three points of the spinnaker can be held separately with a hook-and-loop system so the sail is always ready. Made of heavy-duty, UV-protected ripstop nylon.
Part No: BP530
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting -> Spotlights
Multi-directional remote control spotlight delivers 500,000cp for long range illumination. Cold Cathode area light draws less than 1/4A for all night use. UV protected, weather-resistant housing features stainless-steel components and tinned wire to prevent corrosion. Includes suction-cup mount with a 15' power cord and 9' control cord. Lens Diameter: 4" . Case Material: Polypropylene . Case Dimensions: 7" x 6" x 9" . Range of Motion Side to Side: 340° .
Part No: RC 550M
|
|
|
|
Home -> Plumbing -> Bilge Pumps->Replacement BilgeKleen Filters
We recommend that filters be checked or changed every 3 months.
Part No: 8-BF-2-1R
|
|
|
|
Home -> Engine Systems -> Steering Systems -> Wheels And Steering Acc.->TFXtreme 4300 BC Performance Cables
TfXtreme's unique design assures smoothness and efficiency–with hardly any lost motion–even in the longest and most complex cable routings! This means superior feel at the control, in any boat–performance that had been considered "impossible". TfXtreme achieves the "impossible". Patent-pending splined core to achieves the impossible–easy movement and minimum lost motion.
Part No: CC69214
|
|
|
|
Home -> Safety -> Life Jackets -> Commercial Life Jackets->Search-and-Rescue "SAR" Flotation Vest
Stearns has taken the Search and Rescue (SAR) vest and added a soft, lightweight mesh designed for comfort and ventilation. Soft flotation foam adds extra comfort. Two 1-1/2" encircling belts, adjustable chest strap and zipper front. Two pockets with hook and loop closure. Soft Aquafoam™ and durable Crosstech® flotation foam . D-rings for attaching gear. Rolled, stand-up collar . 62 square inches of 3M™ Scotchlite™ Reflective Material SOLAS-grade 6755 on panels. buoyancy.
Part No: I426ORG-07-000
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->ESP Blocks
Designed to handle the high loads generated by modern racing and cruising boats, ESP blocks feature axle bearings to ensure smooth, hitch-free performance under high load and heavy winds. Sheave: Long-glass engineered plastic, except lockoff: aluminum. Bearings: Contained-axle sleeve and carbon-black Torlon ball bearings. Sheave Size: 3" (76mm). Line Diameter: 3/4".
Part No: 6094
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Silicon Bronze Machine Screws - Slotted Round Head - Bulk Packs
Silicon Bronze - the generic term used for various types of copper-silicon alloys. The properties of the alloy; a high percentage of copper, and small amounts of silicon, manganese or aluminum added for strength.
Part No: 1749A
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Silicon Bronze Machine Screws - Phillips Flat Head - Bulk Packs
Silicon Bronze - the generic term used for various types of copper-silicon alloys. The properties of the alloy; a high percentage of copper, and small amounts of silicon, manganese or aluminum added for strength.
Part No: 4245A
|
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->Series 55 Ball-Bearing Orbit Blocks™
The precision design provides the optimum number of ball bearings in critically loaded areas, eliminates them in inactive areas and reduces ineffective mass, creating the "2-stage" bearing system for durability and low friction performance. The flexible Dyneema® rope link is a product of the latest trends in grand prix ocean racing and provides a more flexible, lighter weight and lower profile solution than traditional shackles. Sheave Size: 2-5/32" (55mm).
Part No: RF55301
|
|
|
|
Home -> Sailboat -> Rigging Products -> Rigging Terminals->Sealoc Calibrated Turnbuckles
" Sealoc calibrated turnbuckles allow you to set rig tension precisely and with repeatability using an easy-to-read scale on the side of the turnbuckle barrel. Integral toggle prevents off-axis loads on either wire or turnbuckle body. Bronze coupling nut eliminates galling, Sealoc calibrated turnbuckles allow you to set rig tension precisely and with repeatability using an easy-to-read scale on the side of the turnbuckle barrel. Bronze coupling nut eliminates galling, thread seizure .
Part No: RF1574-0606
|
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Piston Kit|**Piston Kit.
Part No: 18-4160
|
|
|
|
Home -> Sailboat -> Rigging Products->Quick Attach™ Stud Swage Fitting
The advantage of "Quick Attach" over conventional fittings is the arrangement of the wedges on the outside of the cable which makes assembly much easier and allows different types of wire to be used with the same fitting. The Suncor Quick Attach Stud mechanical swage fitting allows very fast attachment to any type of cable (1X19, 7X19, or 7X7) using only simple tools. Working Load Limit (WLL) is determined by the WLL of the wire being used.
Part No: C0775-1610
|
|
|
|
|
Home -> Engine Systems -> Engine Parts
**FilterKit- Transmission|**FilterKit- Transmission.
Part No: 18-7964
|
|
|
|
Home -> Cordage -> Rigging Products->Split Backstay Adjuster
This adjusting car replaces separate blocks and a connecting member. Tandem sheaves eliminate severe flexing of the backstay, providing a neat, thoroughly functional fitting. The 38 Series with Delrin sheaves is intended for boats under 30ft. , while the husky 39 Series with aluminum sheaves is intended for boats up to 40 feet. 5 to 1 ratio between backstay base width and car height. Example: If backstay width is 5', car height should not exceed 7-1/2' to 8' in height off deck.
Part No: 39-203
|
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Piston Kit|**Piston Kit.
Part No: 18-4161
|
|
|
|
|
Home -> Sailboat -> Rigging Products->Quick Attach™ Stud Swage Fitting
The advantage of "Quick Attach" over conventional fittings is the arrangement of the wedges on the outside of the cable which makes assembly much easier and allows different types of wire to be used with the same fitting. The Suncor Quick Attach Stud mechanical swage fitting allows very fast attachment to any type of cable (1X19, 7X19, or 7X7) using only simple tools. Working Load Limit (WLL) is determined by the WLL of the wire being used.
Part No: C0771-1610
|
|
|
|
Home -> Sailboat -> Blocks->7 Series Universal Head Blocks
Universal head allows one block to function as a front shackle, side shackle or swivel shackle block. Large sheave diameter and high working loads make them suitable for sheet and control blocks on medium to large offshore boats. Beckets are removable. 704 series are aluminum; 705 blocks are stainless. Where applicable, blocks use 1/4” fasteners. Sheave: Black or white Delrin® Bearings: Plain bearings Sheave Size: 2-3/8" (60mm) Line Dia: 1/2" max.
Part No: 704-55
|
|
|
|
|
Home -> Sailboat -> Rigging Products->Quick Attach™ Stud Swage Fitting
The advantage of "Quick Attach" over conventional fittings is the arrangement of the wedges on the outside of the cable which makes assembly much easier and allows different types of wire to be used with the same fitting. The Suncor Quick Attach Stud mechanical swage fitting allows very fast attachment to any type of cable (1X19, 7X19, or 7X7) using only simple tools. Working Load Limit (WLL) is determined by the WLL of the wire being used.
Part No: C0772-1610
|
|
|
