Top Sellers
VUS007R-Norfolk-Charleston, U.S., Northeast Coast, BlueChart g2 Vision, SD Card from GARMIN
Plug a Vision card into any Garmin 5000/4000, 500/400 Series chartplotter to add premium mapping features and enhanced graphical capabilities. All the new Garmin plotters feature a worldwide basemap that, when optional Vision cards are added, offers the high-detail charting of BlueChart g2, plus high-resolution satellite imagery, above and below the water 3D perspective, auto guidance technology, aerial photographs for real-world reference and coastal roads with points of interest.
|
Triple, 1/2" - 9/16" Line Dia., 59.6oz from LEWMAR
Allows controlled release under loadThe award winning D2 Rope Clutch, built for big boat applications, allows for an easy and controlled release even at full holding power. Instead of just jamming the rope, the D2 clutch's Domino Cluster mechanism has a longer holding pattern for better grip and less rope wear. Fits line sizes from 5/16" (8mm) to 9/16" (14mm). Application: High load applications on boats to 55', low load and control lines on larger boats . Safe Working Load: 2650lb.
|
Cabin Hatch/Vent from LEWMAR
Designed to fit Lewmar hatches or to be mounted on deck, this vent features a built-in gasketed bung that makes it 100% watertight. The trim piece is available for thru-deck installations. Includes mounting screws. Type: Passive vent . Material: Acrylic composite . Dimensions: 2-1/4"H x 6-3/4" Dia. . Cutout Size: 3" .
|
Screen Kit Hinge from LEWMAR
Allows the aluminum framed screen included with Lewmar Trim and Screen Kits to be hinged for easier access to the hatch.
|
45lb. CQR Anchor, Boats 32'–58', 40-5/8"L x 14"W x 17"H from LEWMAR
The legendary Lewmar plow anchor stays put, won't breakA favorite among bluewater cruisers for its strength and performance in a wide range of bottom conditions. Excellent penetration in sand, weeds, rocks and mud. Trouble-free anchor roller stowage. Attach a trip line to the eye on the horn for easy break-out. Hinged shank prevents breakout during wind shifts. Forged steel construction. Lifetime warranty against breakage. Material: Galvanized Steel . Application: Sand, Rock and Grass .
|
Nauta 9 Gallon Flexible Fuel Tank from IMTRA CORPORATION
Flexible gasoline tanks won't rust, don't rattle, are easy to tie down, easy to carry, and won't scrape your boat. The Nauta 9-Gallon flexible fuel tank features comfortable, molded carrying handles and rugged 840-denier nylon construction. Fitted with a 1 1/2'' pivoting fill and a capped and 1/4'' NPT hose barb. Measures 28 1/2'' x 17 1/2'' x 6 1/2''.
|
Hatch - Ocean 60 Flat Base from LEWMAR
Well-engineered hatches with CE-certified quality materials and construction. Smoothly styled external hinge enables one-hand operation. Inside handles feature locks that cannot be forced from the outside. Flat base or 1'' flange base (pictured). 3-year warranty. Flat base cutout sizes: Ocean 10 - 10" x 10". Ocean 20 - 7-3/4"W x 13-1/2"L. Ocean 30 - 12-5/8"W x 17-3/4"L. Ocean 40 - 16-3/8" x 16-3/8". Ocean 44 - 17-3/16" x 17-3/16".
|
DVD-Garmin GPS MAP 3006 from BENNETT MARINE
DVD-GARMIN GPS MAP 3006|DVD-GARMIN GPS MAP 3006.
|
Pivoting Self-Launch Bow Roller from LEWMAR
Anchor rollers make dropping and weighing anchor easier on you and your boat. They help reduce chafe, prevent scratches and dings to your boat’s finish and provide a secure place to store your anchor when used in conjunction with an optional chain stopper or tensioner. We stock rollers to fit the most common combinations of anchor, mounting style and boat. Installation note: overhanging anchor rollers should be supported along at least 2/3 of their length. Easily installed using common tools.
|
Windlass Control Box/Solenoid from LEWMAR
Two-direction solenoid/control boxes designed for use with three-wire split field motors, or two-wire permanent magnet motors and three-wire series-wound motors.
|
Replacement Delrin Roller, 3" Dia., 3-3/8" Width from LEWMAR
Anchor rollers make dropping and weighing anchor easier on you and your boat. They help reduce chafe, prevent scratches and dings to your boat’s finish and provide a secure place to store your anchor when used in conjunction with an optional chain stopper or tensioner. We stock rollers to fit the most common combinations of anchor, mounting style and boat. Installation note: overhanging anchor rollers should be supported along at least 2/3 of their length. Easily installed using common tools.
|
Dual Direction 12v Solenoid from LEWMAR
Allows you to set up two operation stations for your windlass. A footswitch at the bow and a hand held remote at the helm or two foot switches, it's all up to you.
|
Replacement Delrin Roller, 2-1/2" Dia., 1-3/4 Width from LEWMAR
Anchor rollers make dropping and weighing anchor easier on you and your boat. They help reduce chafe, prevent scratches and dings to your boat’s finish and provide a secure place to store your anchor when used in conjunction with an optional chain stopper or tensioner. We stock rollers to fit the most common combinations of anchor, mounting style and boat. Installation note: overhanging anchor rollers should be supported along at least 2/3 of their length. Easily installed using common tools.
|
Circlips, Package of Five (5) from LEWMAR
Spares Kit, Single-Speed Winches For all single-speed winches less than 11 years old, includes 4 pawls, 4 pawl springs, 4 circlips. . Spares Kit, Two-Speed Winches For all two-speed and self-tailing winches to 16ST-66ST. Includes 2 circlips, 8 pawls, 12 pawl springs, 3 keys, 8 gear spindle sleeves, 2 collets . Spares Kit, Three-Speed Winches For all three-speed nonself-tailing winches to 65. Includes 4 circlips, 8 pawls, 18 pawl springs, 4 plungers, 6 plunger springs, 2 closing rings .
|
Step Pad, 10-3/4" x 5-1/4", Blue from LEWMAR
Maintain your footing under all conditions! Self-adhesive, diamond-patterned, nonskid pads are great for decks, steps, dinghy floors, personal watercraft, etc. They resist wear and tear, peeling, saltwater, fuels and chemicals. Pads have rounded edges and are precut to fit most common step sizes. Trim with scissors for a custom fit. Peel-and-stick installation. Sold in pairs.
|
|
9 from, from LEWMAR, SD from GARMIN, S from BERN UNLIMITED
|
|
Home -> Shoes & Boots -> Leather Boat Shoes -> Men's Leather Boat Shoes->Men's Mako Mocs
With enhanced comfort and support, the Mako is the world's first boat shoe as rugged as a shark. Men's Half Sizes: 8 - 12, 13. Colors: Coffee, Oak, Amaretto. Stain and Water Resistant Leather for Durable and Lasting Wear. 360° Lacing System™ with Rust Proof Eyelets for a Secure Fit. Padded Tongue and Collar for Added Comfort Around the Foot. Shock Absorbing EVA Heel Cup with Heel Pillow for Added Comfort. Dual-Density Bottom with Cushion Midsole for Under Foot Comfort.
Part No: AMARETTO-9 1/2
|
|
|
|
Home -> Electronics -> Global Positioning Systems->TOPO, U.S., 100K, microSD/SD
Preloaded with detailed topographical maps, these preprogrammed SD cards make it easy to add maps to your compatible GPS unit at any time. Just plug one in, and you’re ready for the great outdoors.
Part No: 010-C0902-00
|
|
|
|
Home -> Seating & Covers -> Covers & Biminis -> Bimini & Cover Hardware->Canvas Fasteners
Items with screw-hole bases do not include screws.
Part No: BPH7251W
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Fuel & Air Filters->Spin-On Series Gasoline Fuel Filter/Water Separators
Racor's famous Aquabloc® filter media separates water into the bottom of the drain bowl and ensures virtually 100% removal of water and solid contaminants. Filters come in different sizes for gasoline engines and any rate of fuel flow. Designed for use on the suction side of pump. All filters feature a die-cast aluminum head which is anodized and painted. Standard pipe-to-hose barbs are used for installation. Inlets/Outlets: 1/4" NPT, except 3/8" NPT on 660 series .
Part No: 025-RAC-02
|
|
|
|
Home -> Boats & Motors -> Kayaks & Canoes
Two-piece, easy to transport and store paddle is perfect for beginners or for seasoned kayakers alike. High-quality shaft construction is made from anodized aircraft grade aluminum with a fiberglass ferrule system. Rubber padded grip range is added for more comfortable paddling.
Part No: KAC 111
|
|
|
|
Home -> Shoes & Boots -> Leather Boat Shoes->Women’s Bluefish 2-Eye Mocs
For a personalized fit, slip on these genuine handsewn Mocs. The contoured last and polyurethane footbed provide total comfort while the internal heel offers lateral support. The Sperry Top-Sider leather is water resistant and stain resistant with a breathable mesh upper. The sidewall is stitched to the midsole and the molded rubber outsole is razor siped with weather channeling grooves for an excellent grip. Soft, full grain and oil-tanned leather uppers are easy to clean. Ivory, Linen/Oat.
Part No: IVORY-7 1/2
|
|
|
|
Home -> Watersports -> Tow Ropes & Accessories->Women's Brighton Helmet
The Brentwood is the lightest-weight, lowest-profile action sports helmet available. Check it out. Note: Zipmold hard foam meets ASTM F 2040, CPSC and EN 1078 standard for bike and skate. . Weight: 12. 5 oz.
Part No: WW2BHMBKS
|
|
|
|
|
Home -> Electronics -> Global Positioning Systems->TOPO, U.S., 100K, microSD/SD
Preloaded with detailed topographical maps, these preprogrammed SD cards make it easy to add maps to your compatible GPS unit at any time. Just plug one in, and you’re ready for the great outdoors.
Part No: 010-C0907-00
|
|
|
|
Home -> Watersports -> PWC Parts & Accessories -> PWC Accessories->Watts Helmet
The first vented visor lid. Available as a Hard Hat with multiple-impact Brock Foam or as a Helmet with EPS foam. EPS: complies with standards. Weight: 16. 5 oz.
Part No: MW5MBKXL
|
|
|
|
Home -> Watersports -> PWC Parts & Accessories->Baker Helmet
The Baker has captuerd the attention of all serious action sports atheletes. The world's first functional visor lid. Available as a Hard Hat with multiple-impact Brock Foam or as a helmet with EPS foam. EPS: complies with standards. Weight: 17 oz.
Part No: MW4HNGL
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Standard T-Track
Made of 6061-T6 anodized aluminum, this track features three stop pin holes between fastener holes. Holes at 1-3/8" (34mm) intervals allow sailors to fine-tune sails with three-times the adjustment of normal track. Also works well with reefing blocks and spinnaker mast eyes. The concave shaped riser fits most spar sections and allows for proper sealant bedding on flat surfaces. Mounting holes on 4" centers.
Part No: 40-74
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers->Trailer Tires & Wheels
Boat and camper tires take a real pounding on the road and long periods of storage can cause deterioration. These affordable replacement tires meet Department of Transportation Standards. Tires beginning with ST are special trailer tires with stiffer sidewalls to improve trailer stability and reduce sway. Select bias ply with galvanized, painted or chrome rims, spoked or solid, in a variety of sizes. For heavier loads and/or trailers used over long distances, we recommend radial tires.
Part No: 16525
|
|
|
|
Home -> Cabinet & Deck Hardware -> Rail Fittings & Rub Rail->Teak Handrails
Handrails are beautiful teak. Handrails are 1 1/16W x 2 1/4"H. 1 loop: 13"L. 2 loop: 23"L. 3 loop: 33"L. 4 loop: 43"L. 5 loop: 53"L.
Part No: 60110
|
|
|
|
Home -> Shoes & Boots -> Leather Boat Shoes -> Men's Leather Boat Shoes->Men's Performance Slip-On Shoe
Men's Performance Slip-On Shoes Waterproof, handsewn leather uppers . Breathable mesh side panels . Reinforced toe and extra heel support .
Part No: LINEN-9
|
|
|
|
This high-pressure electric pump clips onto any 12V battery to provide 2. 1 psi at 11. 7 cu. ft. /min. 23" hose. Inflate or deflate any inflatable or boat with ease, precision and unmatched portability.
Part No: 99M MP-250WM
|
|
|
|
Home -> Sailboat -> Blocks->60mm Racing Fiddle Blocks
For chafe-free, low-friction tackles. Sheave: Anodized aluminum alloy . Ball Bearings: Delrin® . Sheave Size: 2-3/8" (60mm) & 1-5/8" (40mm) . Line Dia. : 3/8" max. . Cheek Material/Finish: Anodized aluminum alloy . Shackle/Strap Type: Swivel with three-way locking, drilled-out head . Cleat: Model with cleat: adjustable arm, aluminum cam cleat .
Part No: 29901631
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Thinners & Solvents->Awl-Cat #3 Brushing Converter - (Professional Application Only)
Standard converter for use in brush or roller application of Awlgrip LPU topside enamels. Normally mixed in a one-part converter to two parts color base ratio.
Part No: OH3002/1PTUS
|
|
|
|
Home -> Foul Weather Gear & Jackets -> Jackets & Fleece->Men's Skipper Jacket
Like the Skipper Pullover, our Skipper Jacket is constructed of antistatic, anti-pilling FarInfrared® fleece. When raised, the pull tab for the center, two-way reverse zipper houses in a recessed “garage,” so it won’t irritate your neck. Shock cord zipper pulls are conveniently concealed in the pockets, so while you warm your hands you can snug this coat up warm and tight. Available in Bravo Red, Orca Black, Carbon Gray, Marlin Blue. Men's Sizes: S - XXL. 100% polyester.
Part No: ORCA BLACK-M
|
|
|
|
Home -> Fishing -> Rods -> Spinning Rods->Emcast Surf / Jetty Rods
Emcast offers a broad selection of unique rod actions to cover a wide variety of specific fishing conditions. Emcast Surf Feature: Powerful graphite blank, super-sensitive to detect bottom conditions and light pickups. Classic hand wrapped craftsmanship. High density Duracork® grip. Daiwa Long Cast guide system with oversized, lightweight guides. Rugged, unitized guide frames with aluminum oxide ring inserts. Stainless hooded reel seat . Model Power Action Length Feet Pieces Line Wt. (lb.
Part No: EC 1002MHFB
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Anchor Chocks & Accessories->Stowaway Anchor Bags
Rugged Cordura bags with Velcro fasteners are built to survive tough, regular use. Fit Fortress or Guardian anchors. Holds an anchor and 6' of chain (sold separately).
Part No: SFX-16
|
|
|
|
|
Home -> Shoes & Boots -> Leather Boat Shoes -> Men's Leather Boat Shoes->Men's Mako Mocs
With enhanced comfort and support, the Mako is the world's first boat shoe as rugged as a shark. Men's Half Sizes: 8 - 12, 13. Colors: Coffee, Oak, Amaretto. Stain and Water Resistant Leather for Durable and Lasting Wear. 360° Lacing System™ with Rust Proof Eyelets for a Secure Fit. Padded Tongue and Collar for Added Comfort Around the Foot. Shock Absorbing EVA Heel Cup with Heel Pillow for Added Comfort. Dual-Density Bottom with Cushion Midsole for Under Foot Comfort.
Part No: AMARETTO-11 1/2
|
|
|
|
Sierra's leadership in the marine industry continues with the addition of 20 new belts and 8 new hoses for late model stem drive and inboard application. An industry first, Sierra is excited to announce its new line-up of Serpentine belts. 14 Serpentine belts for late model coverage on Mercruiser V6 and V8 big/small block applications. Belts are polyester corded for long-life and durability. Hoses are molded for exact fit and precise installation.
Part No: 18-15117
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Perfection Two-Part Polyurethane
Simpler to use then other two-part polyurethane, Perfection has been formulated to enable amateur users to achieve professional quality results with ease on topsides superstructure and decks. Produces a finish with superb color and gloss retention and provides prolonged impact and abrasion protection-even on the highest wear areas. May be brushed, rolled, or sprayed over primed fiberglass, wood, aluminum, or steel. Base Formulation: Two-part linear polyurethane . Drying Time: To touch: 2 hrs.
Part No: YHS056KIT/QT
|
|
|
|
Home -> Sailboat -> Downwind Poles & Cars
Forespar UXP-150-EF External Trip Ultra Series Ends This is the cutting edge in spinnaker pole end fitting technology. Designed for high strength, very low weight and resistance to wear and corrosion the Ultra Series composite end fitting is perfect for aluminum or carbon fiber spinnaker poles and whisker poles. The Ultra Series is the sailor's choice for inshore and offshore racing and cruising. Available with or without triggers. Maximum recommended boat LOA is 43'. Tube I. 370" .
Part No: 304054
|
|
|
|
|
Home -> Watersports -> Tow Ropes & Accessories->Women's Brighton Helmet
The Brentwood is the lightest-weight, lowest-profile action sports helmet available. Check it out. Note: Zipmold hard foam meets ASTM F 2040, CPSC and EN 1078 standard for bike and skate. . Weight: 12. 5 oz.
Part No: WW2BHMBKM
|
|
|
|
Home -> Cabin & Galley -> Barbecues & Tables
The grill or table is instantly removable from the pedestal with a simple push-button release. The pedestal also is instantly removable from the mounting base with a push-bottom release that allows the pedestal to be unthreaded and removed for storage. There is no need to cut a hole in your deck. Made of durable anodized Aluminum with a brushed Satin Finish, it is perfect for swim platforms, boat decks, pontoon boats, or at home on the patio, balcony or deck. Grill and table sold separately.
Part No: T10-185
|
|
|
|
Home -> Cordage -> Rigging Products->Eye Terminals
Norseman Swageless Terminals provide a completely secure end fitting on conventionally constructed strand, Dyform strand or 7-strand wire. They can be rigged at sea in minutes without special tools and can be inspected simply by unscrewing the assembly. The standard terminal can be used on 1x19 strand, 1x19 Dyform and 7-strand rope, using the appropriate cones. 316 stainless steel. Hole center to wire end. Terminals are reusable, but they must have a new cone.
Part No: N010-M0820
|
|
|
|
Home -> Interior, Flags & Gifts -> Knives & Pocket Tools -> Multi-Purpose Tools->Skeletool® Multi-Tools
Although skeletal in appearance, that certainly doesn’t mean that these multi-tools don’t pack plenty of substance. In fact, these 5oz. , sleek-looking models include regular and needlenose pliers, wire cutters, hard-wire cutters, a Phillips screwdriver with 3/16" and 1/4" bits, a bottle opener, and carabiner clip. Skeletool® CX is made of 154CM stainless steel blade with DLC-coated (tungsten) stainless steel handles. Features one-handed opening.
Part No: 830850
|
|
|
|
|
Home -> Watersports -> PWC Parts & Accessories -> PWC Accessories->Watts Helmet
The first vented visor lid. Available as a Hard Hat with multiple-impact Brock Foam or as a Helmet with EPS foam. EPS: complies with standards. Weight: 16. 5 oz.
Part No: MW5GWXL
|
|
|
|
|
Home -> Watersports -> PWC Parts & Accessories -> PWC Accessories->Baker Helmet
The Baker has captuerd the attention of all serious action sports atheletes. The world's first functional visor lid. Available as a Hard Hat with multiple-impact Brock Foam or as a helmet with EPS foam. EPS: complies with standards. Weight: 17 oz.
Part No: MW4HNGXL
|
|
|
