Top Sellers
CARB GASKET KIT from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Yamaha Carb Kit from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Replaces OMC P/N 378444 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
Impeller, 18-3062 from SIERRA
Recommended replacement schedule is every 3 years for fresh water and every year for salt water Click to view a Sierra Impeller Application Chart (PDF) For further assistance, have your year & model information handy and call our Product Advisors at 1-800-BOATING.
|
For Chrysler/Force, 89-817109A2 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
Outdrive Gasket Set, 18-260, TR/TRS, 1973-1993 from SIERRA
Gasket and O-ring kits that seal the drive to the transom.
|
Water Circulating Pump - #18-3581 - Chrysler Inbd # 3004886, 3619542, 3619859, 3745985 from SIERRA
Water Pumps The water pump is the heart of your inboard or I/O cooling system. All Sierra pumps are bidirectional and can be installed on reverse rotation engines. The pumps are also powder coated for additional protection. Includes mounting gasket. Pumps include brass bi-directional impellers, brass plugs and fittings, carbon resin seal, all mounting gaskets, stainless steel seal cup and spring, stainless steel back plate (where required), and powder coating for maximum corrosion protection.
|
10 Micron Replacement Filter Element for OMC 502905 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. Today’s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage.
|
Johnson/Evinrude Outboard Starter, 120 to 140hp V4 (1985-99), 10 tooth drive gear from SIERRA
Sierra's new and remanufactured starters are the only marine starters that meet Marine UL standards. Sierra's remanufactured starters all have new solenoids, drives, bushings, brushes and springs. The bodies are powder coated for greater corrosion resistance. Sierra has entered an agreement with United Technologies to market their complete line of outboard starters and components. All are 100% load tested . Our remanufactured starters are covered by Sierra's customer satisfaction warranty .
|
30GPH Cartridge, Replaces Racor S3240 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
|
60GPH Cartridge, Replaces Racor S3227 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
|
|
|
Delrin Sheave, 1/2" Max. Line Dia., 1-7/16" OD, 3/8" ID, 5/8" Width from SCHAEFER
Schaefer sheaves are designed to be compatible with Schaefer products, and are not intended for use in other manufacturer's blocks. Delrin sheaves are injection molded with UV inhibitors and monitored molding cycles for a stronger product.
|
Sierra-Tube-Exhaust from SIERRA
Some larger V-8 engines that create a large amount of back pressure use exhaust tubes rather than bellows. This helps to relieve the excessive pressure and eliminate problems with premature bellows failure. In the past, the exhaust bellows would blow up like a balloon and cause the drive shaft bellows to rub against the yoke and U-joints causing holes in the bellows.
|
Prop Nut Kit, Yamaha V4/V6 from SIERRA
An excellent emergency item to carry in your toolbox, for those occasions when the prop nut is misplaced or lost.
|
|
from HARKEN, 1oz, from SCHAEFER, Gasket from SIERRA, Adaptkit from SIERRA
|
|
Home -> Paint & Maintenance -> Sandpaper->Scotch-Brite Surface Roloc Disc - 3", Coarse, 50Pk
Cleaning and surface preparation 3" Coarse.
Part No: 07486
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Sinks, Faucets & Shower->Galley Pump and Faucet Kit
Jabsco Galley Pump & Faucet Kit An economical way to enjoy running water. The compact, quiet-running electric centrifugal pump must be mounted below water level or tank, and may be screwed directly into the tank. The attractive faucet has a stainless steel swing spout, plastic base and built-in switch. Switch rated to 5A@12V DC 1. 0 GPM at 5 psi Ports: 3/8" NPT or barb inlet; 3/8" barb outlet Draw: 1.
Part No: 42530-0000
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->2.25" Blocks
.
Part No: 186
|
|
|
|
Home -> Sailboat -> Headsail Furling
Cruising Furler Unit 2 Accessories.
Part No: -
|
|
|
|
2-Year DOP From 700 To 849. 99|2-Year DOP From 700 To 849.
Part No: 1YR DOP 700-849
|
|
|
|
Home -> Sailboat -> Tiller & Rudder -> Tillers Extensions & Ac->Aluminum Battlestick Tiller Extensions
Ronstan tiller extensions feature fluted anodized aluminum tubing for durability and rigidity and a tapered, non-slip Hyperlon grip with ball end. The Urethane universal joint can be removed without tools. Adjustable-length versions feature a fast-action adjustable shaft for additional versatility. 4732913 Aluminum Fixed 24” RF3128 5/8"Tubing Dia. , 1"Grip Dia. , 24"L, 5. 3Lbs. 1133131 Lightweight Aluminum 33” RF3129 5/8"Tubing Dia. , 1"Grip Dia.
Part No: RF3134
|
|
|
|
Home -> Sailboat -> Blocks->5 Series Universal Head Blocks
Used extensively for sheet blocks on small to mid-sized keelboats and as control line blocks for larger offshore boats. Suitable as mast-base or lead blocks on small to mid-sized boats. Universal three-way head. Black anodized aluminum or stainless cheeks. Stainless straps and posts. Sheave: UV-protected Delrin. Ball Bearings: Plain bearings . Sheave Size: 2" (51mm) . Line Dia. : 7/16" max. .
Part No: 504-55
|
|
|
|
Home -> Sailboat -> Blocks->Block Accessories
Ball-and-socket bases allow blocks to articulate so they lead fairly from any direction to any direction. Stanchion base mounts to any 7/8" or 1"dia. stanchion .
Part No: 1634
|
|
|
|
Home -> Seating & Covers -> Covers & Biminis
Contains 10 Twist Studs with Two-Hole Screw Base (Screws not included), 10 Twist Studs with Two-Prong Base and Clinch Plate, 20 Twist Eyelets with Four-Prong Base and Washer.
Part No: KP7259W
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains
**Tool-Dial Indicatr Adptr Kit|**Tool-Dial Indicatr Adptr Kit.
Part No: 18-9867
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains
**Hose-Power Trim|**Hose-Power Trim.
Part No: 18-2131
|
|
|
|
Home -> Engine Systems -> Engine Parts
**SealKit-Upper|**SealKit-Upper.
Part No: 18-8361
|
|
|
|
Home -> Engine Systems -> Engine Parts
**RepairKit-WaterPump|**RepairKit-WaterPump.
Part No: 18-3323
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Regulator-Voltage|**Regulator-Voltage.
Part No: 18-5727
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Cooling Systems
**RepairKit-WaterPump|**RepairKit-WaterPump.
Part No: 18-3406
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains
**AnodeKit- Magnesium|**AnodeKit- Magnesium.
Part No: 18-6150M
|
|
|
|
Home -> Engine Systems -> Engine Parts
**CarburetorKit|**CarburetorKit.
Part No: 18-7242
|
|
|
|
Home -> Engine Systems -> Engine Parts
**GasketSet-Short Block|**GasketSet-Short Block.
Part No: 18-1256
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Gasket-Head|**Gasket-Head.
Part No: 18-3874
|
|
|
|
Home -> Engine Systems -> Trim Tabs & Hydrofoils
**Trim Cylinder Anchor Pin Kit|**Trim Cylinder Anchor Pin Kit.
Part No: 18-2461
|
|
|
|
Home -> Engine Systems -> Engine Parts
**TriggerAssy|**TriggerAssy.
Part No: 18-5795
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->Silicon Bronze Machine Bolts - Hex Head - Bulk Packs
Silicon Bronze - the generic term used for various types of copper-silicon alloys. The properties of the alloy; a high percentage of copper, and small amounts of silicon, manganese or aluminum added for strength.
Part No: 2288B
|
|
|
|
Home -> Sailboat -> Blocks->40mm Carbo AirBlocks®
From the folks who invented ball bearing blocks, this line of blocks boasts an excellent strength-to-weight ratio. 29mm doubles and triples feature a U-lock to hold the swivel in the front or side position, or allow it to spin freely. Use the 40mm blocks for jib and mainsheet systems on high-performance dinghies, and for high-load control lines on small keelboats. The 57mm blocks have an enormous working range that makes them ideal for main and jib sheets, spinnaker halyards and control lines.
Part No: 2646
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> Mainsheet Traveler->Midrange Traveler Track & Accessories
Midrange track is available in low-beam or high-beam configurations. Use high-beam track to span a cockpit or other unsupported area. Choose between variable hole spacing and drilled track. Holes in metric drilled track are on 100mm centers. Use 1/4” (6mm) FHMS fasteners. End stops sold separately. Add 1522 or 1523 Heavy Duty End Stops (sold in pairs, fasteners not included) when end control assemblies are not used. Low-beam track measures 9/16" (14mm)H x 1 1/16" (27mm)W.
Part No: 1616.1.5M
|
|
|
|
Home -> Sailboat -> Winches -> Winch Handles & Holders->SpeedGrip Ball Bearing Winch Handles
SpeedGrip handles use a ball bearing knob on the top of the grip to allow much faster grinding under low loads, and more powerful two-handed grinding under high loads. A Harken exclusive. Grip: Ball-bearing double, with ball-bearing top. Type: Locking .
Part No: B8ASGLP
|
|
|
|
Home -> Engine Systems -> Steering Systems->TFXtreme 4300 BC Performance Cables
TfXtreme's unique design assures smoothness and efficiency–with hardly any lost motion–even in the longest and most complex cable routings! This means superior feel at the control, in any boat–performance that had been considered "impossible". TfXtreme achieves the "impossible". Patent-pending splined core to achieves the impossible–easy movement and minimum lost motion.
Part No: CCX43008
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->LOUPS™
LOUPs are one of the many new technologies being used on today's hot race boats. From globe-circling powerhouses to local course racers, one thing ALL race boats have in common is that everything is always about weight, or the attempt to reduce weight in any way possible. A LOUP is simply a piece of high-tech Dyneema® line spliced into itself—making a loop. Strong enough to lift a Farr 40, with each crew member holding a can of beer. The real LOOP advantage is in the weight savings.
Part No: 3140
|
|
|
|
Home -> Sailboat -> Headsail Furling->MKIV Unit 2 Furler Accessories
Connectors, extra extrusions and link plates for MKIV Furler Unit 2.
Part No: 7412.30
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->Series 60 Multi-Purpose Blocks
Black cheeks are made from chromed stainless steel for good looks and strength. Flared line entry reduces chafe and allows line to run freely. Universal swivel head lets you select alignment of block. Stainless steel cheeks and load straps, Acetal sheaves. Sheave: UV stabilized Acetal. Bearings: Plain bearings. Sheave Size: 2-2/3" (60mm). Line Diameter: 1/2" max. . Cheek Material/Finish: Stainless, polished and black chromed. Shackle/Strap Type: Universal head shackle.
Part No: RF866+
|
|
|
|
Home -> Sailboat -> Winches -> Winch Handles & Holders->OneTouch Winch Handles
Squeeze-and-insert winch handle for quick one-handed operation Save valuable time in heated mark-roundings or tacking duals with this innovative winch handle. Its patented "OneTouch" lock-in mechanism offers fast, one-handed winch exit and entry, so you spend less time fiddling with a sticky locking lever and more time sailing. Just squeeze the release button (which runs the entire length of the handle) and pull to unlock in one quick, easy motion.
Part No: 29140040
|
|
|