Top Sellers
Brightside Pre-Kote Primer - Gray, Quart from INTERLUX
Fills minor blemishes and sands easilyOne part primer for use with Brightside or any other one-part topside enamel. Microspheres provide high build and improved sandability. (Replaces Brightside Primer and 279 White Undercoater. ) Application: Brush, roller, airless/conventional spray . Number of Coats Recommended: One or two, depending on surface condition. Drying: Overcoating: 6 to 12 hrs. Drying Time: To touch: 1 to 3 hrs. Coverage: Brush: 112 sq. ft/qt, 450 sq. ft/gal; Spray: 87 sq.
|
PAR-Max 4 Water-System Pump, 12V from JABSCO
Flow rate: 16. 3 Litres/min (4. 3 gallons/min) Self-priming from dry up to 2. 4m (7. 8ft) Smooth flow. Dry running capability. Soft noise absorbing mounts. Snap-fit port fittings. Corrosion resistant materials. Meets USCG Regulation 183. 410 and ISO 8846 MARINE (ignition protection).
|
Micron CSC Antifouling Paint, Red, Quart from INTERLUX
Haul and relaunch without loss of performance The innovative copper-copolymer formula of Micron CSC provides a controlled release of antifouling biocide at the paint surface, which means that the longevity of the coating is related to the amount of paint applied. Can be applied over most paints in good condition. Micron CSC will not lose its effectiveness when hauled out of the water for extended periods of time (such as winter storage). Type: Copolymer . 2% Cuprous Oxide . Additives: None .
|
VC-Offshore - Baltoplate Gray, Gallon from INTERLUX
Used by performance boatsVC Offshore combines superior antifouling performance with a super smooth low friction surface for the performance conscious boater. This high-strength, vinyl antifouling paint, fortified with Teflon® yields a hard, very smooth finish for maximum durability, reduced friction and increased performance. High copper loading fights fouling on performance boats in saltwater. Can be used in fresh, salt and brackish waters. Should not be applied over non-vinyl bottom paints.
|
Mast Hound, 3IN X 4 1/2IN from RONSTAN
A simple effective fitting for terminating wire rigging. 304 Stainless. Fits masts 3" -4. 5" dia. Weight 3. 9oz.
|
All-Purpose Boat Soap with Wax from INTERLUX
Combination wash and wax for your boatAll-Purpose Boat Soap is a concentrated universal cleaner with a wax effect that leaves surfaces shiny and water repellent. Suitable for fiberglass, wood, metals and painted surfaces. Does not remove wax and may be used regularly without affecting wax protection. May be mixed with salt water-convenient to use anywhere. Available in 1. 05qt. and 1.
|
Cetol Marine Light - Quart from INTERLUX
Enhances and protects the natural beauty of interior and exterior woodSemi-transparent finish prevents weathering and repels water. just wash wood thoroughly and apply. Three coats are recommended for the first application, followed by annual touchups. Marine Light is more translucent than Marine. If a gloss finish is desired, either may be overcoated with Marine Gloss. Quart. Long-lasting adhesion and protection from UV rays and weathering. Flexible, breathable, translucent finish; Quarts.
|
Chris Craft Stain #573 - Pint from INTERLUX
Chris Craft Stain - Pint Fills grain while staining wood, reducing the number of coats of varnish needed. May also be used on bare mahogany planking before applying primer or sanding surfacer.
|
Premium 4-Cycle Heavy-Duty SAE 15W40 Engine Oil, Gallon from WEST MARINE
An excellent choice for all 4-cycle inboard diesel and gasoline engines operating in all conditions. Clean-burning formula meets or exceeds both industry and factory performance specifications. Powerful additives allow for dependable engine service.
|
Telescopic Tiller Extension 29" - 48" from RONSTAN
Ronstan tiller extensions feature fluted anodized aluminum tubing for durability and rigidity and a tapered, non-slip Hyperlon grip with ball end. The Urethane universal joint can be removed without tools. Adjustable-length versions feature a fast-action adjustable shaft for additional versatility. 4732913 Aluminum Fixed 24” RF3128 5/8"Tubing Dia. , 1"Grip Dia. , 24"L, 5. 3Lbs. 1133131 Lightweight Aluminum 33” RF3129 5/8"Tubing Dia. , 1"Grip Dia.
|
Impeller Kit - Neoprene (K) 2-1/4x2 from JABSCO
JABSCO Impellers Tough, long-lasting replacement impellers from the inventors of the flexible impeller pump. Use neoprene for most water-pumping applications.
|
Hatch - Ocean 60 Flat Base from LEWMAR
Well-engineered hatches with CE-certified quality materials and construction. Smoothly styled external hinge enables one-hand operation. Inside handles feature locks that cannot be forced from the outside. Flat base or 1'' flange base (pictured). 3-year warranty. Flat base cutout sizes: Ocean 10 - 10" x 10". Ocean 20 - 7-3/4"W x 13-1/2"L. Ocean 30 - 12-5/8"W x 17-3/4"L. Ocean 40 - 16-3/8" x 16-3/8". Ocean 44 - 17-3/16" x 17-3/16".
|
Arrow Style Windvane from RONSTAN
Small boat wind indicators feature quality construction at a fraction of the price of other windvanes, so they are a great choice for junior sailors who might be rough on the equipment. Ronstan's new vanes are balanced for accuracy and molded in UV-stabilized nylon. The aluminum shaft can be removed from the mast bracket for trailering or security. Both the Pennant and Arrow style indicators include adjustable tacking angle arrows.
|
V700 Windlass from LEWMAR
The V700 is a compact, stainless steel windlass designed for power and sail boats. The elegant, low profile design makes windlass an attractive deck accessory. The "FallSafe" gypsy lock takes the load off the gear train while at anchor and also prevents accidental deployment while underway. Includes a heavy-duty, 316 stainless-steel control arm and stripper. Boat Length: to 35' . Rode Type: Rope/chain . Rode Size: 1/4" HT chain, 1/2" rope . Speed Up: 62' (110lb.
|
Drill Pump Kit from JABSCO
The self-priming drill pump chucks into a standard 1/4" drill motor and pumps up to 3 1/2gpm. Kit includes all items needed for draining engine oil through the dipstick tube. Includes 3' of 1/2" hose, probe adapter and 40"L x 1/4"dia.
|
|
from INTERLUX, from LEWMAR, from RONSTAN, 4 from JABSCO, Qt from INTERLUX
|
|
Home -> Sailboat -> Winches -> Winch Handles & Holders->SpeedGrip Ball Bearing Winch Handles
SpeedGrip handles use a ball bearing knob on the top of the grip to allow much faster grinding under low loads, and more powerful two-handed grinding under high loads. A Harken exclusive. Grip: Ball-bearing double, with ball-bearing top. Type: Locking .
Part No: B8ASG
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Big Boat Track & Accessories
Harken’s Big Boat Traveler Track is available in low-beam and high-beam configurations.
Part No: 3154.1.2M
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->Series 40 Ball Bearing Orbit Blocks™
The newest addition to Ronstans Orbit range of super lightweight, fiber reinforced blocks. Series 40 Ratchet blocks feature 14:1 holding power and a sophisticated cross-hole sheave geometry for superior rope wear performance. The automatic version is ideal for asymmetric spinnakers and other applications where an auto-engaging ratchet is preferred. Ball Bearings: High compression strength Carbon Black Acetal, Stage 2 bearing: Glass fiber reinforced, MoS2 impregnated engineered nylon.
Part No: RF45311
|
|
|
|
Home -> Plumbing -> Bilge Pumps -> Bilge Pump Parts->Impellers
JABSCO Impellers Tough, long-lasting replacement impellers from the inventors of the flexible impeller pump. Use neoprene for most water-pumping applications.
Part No: 5929-0003-P
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Stainless-Steel Snap Hooks
Stainless steel, asymmetric, with eye.
Part No: 2328
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper->Scotch-Brite Surface Roloc Disc - 3", Coarse, 50Pk
Cleaning and surface preparation 3" Coarse.
Part No: 07485
|
|
|
|
Home -> Watersports -> Tow Ropes & Accessories -> Watersport Accessories
Generous height and angle adjustmentSimply clamps onto windshields up to 1 1/4" thickNo mounting tools needed.
Part No: M2000
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Perfection Two-Part Polyurethane
Simpler to use then other two-part polyurethane, Perfection has been formulated to enable amateur users to achieve professional quality results with ease on topsides superstructure and decks. Produces a finish with superb color and gloss retention and provides prolonged impact and abrasion protection-even on the highest wear areas. May be brushed, rolled, or sprayed over primed fiberglass, wood, aluminum, or steel. Base Formulation: Two-part linear polyurethane . Drying Time: To touch: 2 hrs.
Part No: YHA183KIT/QT
|
|
|
|
Home -> Cordage -> Rigging Products->Stud Terminals
Norseman Swageless Stud Terminals provide a completely secure end fitting on conventionally constructed strand, Dyform strand or 7-strand wire. They can be rigged at sea in minutes without special tools and can be inspected simply by unscrewing the assembly. The standard terminal can be used on 1x19 strand, 1x19 Dyform and 7-strand rope, using the appropriate cones. 316 stainless steel. Stud end to wire end. Terminals are reusable, but they must have a new cone.
Part No: N030-M0816
|
|
|
|
Home -> Cordage -> Rigging Products->Stud Terminals
Norseman Swageless Stud Terminals provide a completely secure end fitting on conventionally constructed strand, Dyform strand or 7-strand wire. They can be rigged at sea in minutes without special tools and can be inspected simply by unscrewing the assembly. The standard terminal can be used on 1x19 strand, 1x19 Dyform and 7-strand rope, using the appropriate cones. 316 stainless steel. Stud end to wire end. Terminals are reusable, but they must have a new cone.
Part No: N030-M0820
|
|
|
|
Home -> Cabin & Galley -> Bedding & Drapery -> Bedding, Linens->Adjustable Bunk Bedding
Boat bunks come in so many shapes and sizes that it’s nearly impossible to find anything short of expensive custom-made sheets that fit. These comfortable, high-count percale poly/cotton fabric sheets feature an adjustable drawstring and barrel lock at each corner for a snug fit regardless of bunk shape. Available as a set with the top sheet sewn to the end of the bottom sheet to eliminate tangled bedding or as an individual bottom sheet.
Part No: DBLDSTOY
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Dock Bumpers->EPDM Rubber Dock Guards
Protect your boat and dock with this new line of EPDM rubber dock edging. EPDM rubber is designed to withstand the most extreme environments and is soft enough to cushion your boat from the dock or pier. It’s softer than vinyl and stays flexible when exposed to UV, offering uncompromising longevity. Choose from five different profiles for protection where you need it most. Attachment Method: Stainless steel dock nails (sold separately). Shock Absorption Mechanism: EPDM Rubber.
Part No: 96037
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil
Creates a durable, high-gloss, long-lasting coatingProvides unsurpassed gloss, longevity and gloss retention. May be brushed or spray applied. Cannot be applied over single-part varnishes. Kits make up one quart in the proper 3:1 ratio. Coverage: 150sq. ft. /qt. Recommended Usage: Exterior and interior, above water . Formulation: Two-part clear linear polyurethane . Additives: UV inhibitors . Drying Time: To touch: 1 to 3 hrs.
Part No: YVA853KIT/QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Perfection Two-Part Polyurethane
Simpler to use then other two-part polyurethane, Perfection has been formulated to enable amateur users to achieve professional quality results with ease on topsides superstructure and decks. Produces a finish with superb color and gloss retention and provides prolonged impact and abrasion protection-even on the highest wear areas. May be brushed, rolled, or sprayed over primed fiberglass, wood, aluminum, or steel. Base Formulation: Two-part linear polyurethane . Drying Time: To touch: 2 hrs.
Part No: YHB663KIT/QT
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports -> Hatch Accessories
Protect your hatches from the elements! Polished 304 stainless steel cover trim for hatches will help prevent your hatches from forming mildew or discoloring. It will give them a clean, finished look. 1-1/4"W x 6'L. Predrilled for #6 screws (not included).
Part No: S11-4660P6-1
|
|
|
|
Home -> Sailboat -> Blocks->60mm Synchro Blocks
Lewmar's Synchro blocks are more efficient, less expensive Lewmar's Synchro blocks combine geometry, sheave ratios and a unique free spin bearing, to deliver performance that’s comparable to ball and roller bearing blocks used in pro racing—at a more affordable price. Synchro blocks provide the optimal ratio between line size, sheave diameter and the interface between rope and sheave. This new range of blocks transforms performance, not only by improving efficiency, but also speed and handling.
Part No: 29926003
|
|
|
|
Sierra's leadership in the marine industry continues with the addition of 20 new belts and 8 new hoses for late model stem drive and inboard application. An industry first, Sierra is excited to announce its new line-up of Serpentine belts. 14 Serpentine belts for late model coverage on Mercruiser V6 and V8 big/small block applications. Belts are polyester corded for long-life and durability. Hoses are molded for exact fit and precise installation.
Part No: 18-15114
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting->Tungsten Halogen Floodlights & Replacement Bulbs
Unique trapezoidal light beam provides excellent and even floodlight coverage. Tungsten halogen 50W bulbs produce 9,900cp. The totally weatherproof housing is high-impact polypropylene with stainless steel fittings. Mounting bracket included. Average bulb life: 450 hours. Draw: 4A@12V DC.
Part No: 45903-0000
|
|
|
|
Home -> Sailboat -> Winches -> Winch Repair Parts
Lid Diameter: 60mm Depth above deck: 22mm Depth below deck: 33mm Hole cutout required: 25mm Fixings: 3 x 4mm on 43mm PCD equi-spaced.
Part No: 69000345
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Fuel & Air Filters->Heat Deflector Kits
Add to your 500MA, 900MA or 1000MA filter to provide a heat shield and drain plug like ABYC compliant filters.
Part No: RK 11868
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Additives & Fiberglass->Episize™ Glass Tape
Episize™ Glass Tape Versatile WEST SYSTEM EpisizeTM 9-oz. woven fabric tapes are ideal for reinforcing chines, hull/deck corners and similar structural applications. When bonded with WEST SYSTEM epoxy, they provide additional tensile strength to resist hairline crack development and abrasion. #729 2" wide x 10' or 50 yard rolls. #731 3" wide x 50 yard roll. #732 4" wide x 10' or 50 yard rolls.
Part No: 732
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Perfection Two-Part Polyurethane
Simpler to use then other two-part polyurethane, Perfection has been formulated to enable amateur users to achieve professional quality results with ease on topsides superstructure and decks. Produces a finish with superb color and gloss retention and provides prolonged impact and abrasion protection-even on the highest wear areas. May be brushed, rolled, or sprayed over primed fiberglass, wood, aluminum, or steel. Base Formulation: Two-part linear polyurethane . Drying Time: To touch: 2 hrs.
Part No: YHS253
|
|
|
|
Home -> Safety -> Life Jackets -> Life Jacket Accessories->Automatic PFD Rearming Kits
Mustang Ocean Series PFD Rearming Kit Style: Auto Hydrostatic. Cylinder Weight: 33g. Cylinder Neck Diameter: Sealed to inflator. Inflator Type: Hammar1F. Kit Contents: Hydrostatic inflator cap, cylinder, key. PFD Brands Commonly Used With*: Mustang Ocean Series PFD . Inflator Number: MA7214. *The term "PFD Brands Commonly Used With" is not all inclusive. Rearming Kits may be used with other brands and vests.
Part No: MA7214
|
|
|
|
Home -> Engine Systems -> Engine Parts->Power Packs
We use only grade 1 components in our electronic replacement parts. Grade 1 components are the best available electrical components. We normally avoid OEM patents by improving the quality of these units by adding additional circuit protection.
Part No: 18-5759
|
|
|
|
Home -> Electrical -> Shore Power -> Adapters, Plugs & Outlets
Watertight access to shore power Watertight power inlet with 4-way, right-angle safety enclosure. Marine stainless steel trim. Friction lock holds cap open for easy insertion of shore power cable. Closes easily, forming a watertight seal that exceeds ABYC requirements for hull inlets. Amperage: 30A, 125V. Application: AC Shore power.
Part No: 301EL-B
|
|
|
|
Home -> Cordage -> Rigging Products->Norseman Swageless Fork Terminals
Norseman Swageless Terminals provide a completely secure end fitting on conventionally constructed strand, Dyform strand or 7-strand wire. They can be rigged at sea in minutes without special tools and can be inspected simply by unscrewing the assembly. The standard terminal can be used on 1x19 strand, 1x19 Dyform and 7-strand rope, using the appropriate cones. 316 stainless steel. Hole center to wire end. Terminals are reusable, but they must have a new cone.
Part No: N020-0712
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Perfection Two-Part Polyurethane
Simpler to use then other two-part polyurethane, Perfection has been formulated to enable amateur users to achieve professional quality results with ease on topsides superstructure and decks. Produces a finish with superb color and gloss retention and provides prolonged impact and abrasion protection-even on the highest wear areas. May be brushed, rolled, or sprayed over primed fiberglass, wood, aluminum, or steel. Base Formulation: Two-part linear polyurethane . Drying Time: To touch: 2 hrs.
Part No: YHY999KIT/QT
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Snap Shackles->Snap Shackles with Molded Thimble Eyes
Hot drop-forged from high-resistance 17-4 PH stainless steel for superior strength and elasticity. Molded thimble reduces abrasion on the splice.
Part No: 2495
|
|
|
|
Home -> Electrical -> Shore Power -> Adapters, Plugs & Outlets->Shore Power Pigtail Adapters
Short jumper cord for wet locations Water-resistant adapters are fully molded, include sealing covers, and look like very short shore power cordsets. Recommended for use in wet locations. Pigtail adapters allow you to connect from one dockside receptacle (or other power source receptacle) to one boatside inlet or equipment of dissimilar power configuration. All components are covered by Marinco’s five-year warranty.
Part No: 105A
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Dock Carts->Kart-Ahoy Dock Carts
Identical dimensions to the Lightweight Dock Cart (Model 412403), but with larger diameter wheels for added mobility and greater loadbearing capacity. Handles 185lb. of payload and boasts 15" wheels. The handle and cargo baskets are interchangeable between the two models. Recommended for freshwater use only. Material: Plastic/steel . Maximum Load Capacity: 185lb. . Cargo Area: 2. 71cu. ft.
Part No: 11210
|
|
|