Welcome! Please Sign-In
Top Sellers
CARB GASKET KIT from SIERRA
CARB GASKET KIT from SIERRA
Sierra carb kits and gaskets for engine tune ups.
Yamaha Carb Kit from SIERRA
Yamaha Carb Kit from SIERRA
Sierra carb kits and gaskets for engine tune ups.
Replaces OMC P/N 378444 from SIERRA
Replaces OMC P/N 378444 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
Impeller, 18-3062 from SIERRA
Impeller, 18-3062 from SIERRA
Recommended replacement schedule is every 3 years for fresh water and every year for salt water Click to view a Sierra Impeller Application Chart (PDF) For further assistance, have your year & model information handy and call our Product Advisors at 1-800-BOATING.
For Chrysler/Force, 89-817109A2 from SIERRA
For Chrysler/Force, 89-817109A2 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
Crown Head Pump Assembly, Post-January 1988, #CH102MW from RARITAN
Crown Head Pump Assembly, Post-January 1988, #CH102MW from RARITAN
Raritan CH102MW Crown Head Complete Inlet Pump Ass'y Post 1988.
SmartPilot X-5 Wheel Pilot from RAYMARINE INC.
SmartPilot X-5 Wheel Pilot from RAYMARINE INC.
The innovative SmartPilot X-5 Wheel autopilot is equipped with the fully enclosed MkII wheel-drive for simple installation and below deck autopilot performance. The control unit and patented fluxgate compass are mounted separately for easy access and optimum performance. Select the corepack (without a control head, but including the course computer, fluxgate compass and drive unit) if you already have a control head and only need the rest of the autopilot system.
Johnson/Evinrude Outboard Starter, 120 to 140hp V4 (1985-99), 10 tooth drive gear from SIERRA
Johnson/Evinrude Outboard Starter, 120 to 140hp V4 (1985-99), 10 tooth drive gear from SIERRA
Sierra's new and remanufactured starters are the only marine starters that meet Marine UL standards. Sierra's remanufactured starters all have new solenoids, drives, bushings, brushes and springs. The bodies are powder coated for greater corrosion resistance. Sierra has entered an agreement with United Technologies to market their complete line of outboard starters and components. All are 100% load tested . Our remanufactured starters are covered by Sierra's customer satisfaction warranty .
Big-T Rotary Helm from TELEFLEX
Big-T Rotary Helm from TELEFLEX
Die-cast gears and added shaft support help it hold up to tough use. For single or twin station powerboats up to 34'. Boat Type: Inboards and power-assisted sterndrives, up to 34' . Steering Type: Rotary . Dimensions: 6-13/16"D behind dash front x 6-3/8"W x 5-1/16"H . Steering Wheel: Up to 20". Not included . Steering Wheel Shaft: 3/4" tapered . Cable Type: QC II SSC61XX or SSC72XX . Mounting Hardware: Requires bezel kit sold separately .
PHII Pump Assembly, Complete, #PHIIPUMP from RARITAN
C.P. Marine Toilet Bowl and Drain Cleaner from RARITAN
C.P. Marine Toilet Bowl and Drain Cleaner from RARITAN
Raritan C. P. cleans potties! This is the only bowl cleaner that can be combined with K. O. It eliminates the worst raw odors from the intake line. Cleans without brushing. Bio-enzymatic.
10 Micron Replacement Filter Element for OMC 502905 from SIERRA
10 Micron Replacement Filter Element for OMC 502905 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. Today’s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage.
Aluminum Transom Support Master Mounting Kit from TELEFLEX
Aluminum Transom Support Master Mounting Kit from TELEFLEX
Universal mount for most outboard engine steering applications. This kit includes the Teleflex Outboard Clamp Block, Support Tube, and the Clevis Kit.
Water Circulating Pump - #18-3581 - Chrysler Inbd # 3004886, 3619542, 3619859, 3745985 from SIERRA
Water Circulating Pump - #18-3581 - Chrysler Inbd # 3004886, 3619542, 3619859, 3745985 from SIERRA
Water Pumps The water pump is the heart of your inboard or I/O cooling system. All Sierra pumps are bidirectional and can be installed on reverse rotation engines. The pumps are also powder coated for additional protection. Includes mounting gasket. Pumps include brass bi-directional impellers, brass plugs and fittings, carbon resin seal, all mounting gaskets, stainless steel seal cup and spring, stainless steel back plate (where required), and powder coating for maximum corrosion protection.
30GPH Cartridge, Replaces Racor S3240 from SIERRA
30GPH Cartridge, Replaces Racor S3240 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.

5' from TELEFLEX, Carbkit from SIERRA, #PHRK from RARITAN

Carbkit from SIERRA Home -> Engine Systems -> Engine Parts
**CarburetorKit|**CarburetorKit.
Part No: 18-7728
25' Television Cable from MARINCO Home -> Electrical -> Shore Power -> Phone & TV Wiring->Television Cable
Standard 75ohm, RG59-U with slip-on connection and heavy-duty boots on both ends.
Part No: TV99-25
Single Groove Pulley, 2.2" Dia., 7/16" Belt Width from BALMAR Home -> Electrical -> Chargers & Inverters -> Alternators and Regulators->6, 9 & 94-Series Alternator Pulleys
9-Series alternator pulleys are machined with rear spacer flange for use with Balmar small case 9-Series and large case 94-Series high-output alternators. Can be used with 6-Series alternators (may require some adjustment for pulley alignment).
Part No: 1300
187 Series Thermal Circuit Breaker, Panel Mount, 150A from BLUE SEA SYSTEMS Breaker-Wtr Prf Panl Mt 150A|Breaker-Wtr Prf Panl Mt 150A.
Part No: 7048
SEAL Pup Knife from SOG KNIVES Home -> Interior, Flags & Gifts -> Knives & Pocket Tools
This stowable blade offers durability and performance and makes an excellent companion for outdoor and underwater adventures. Glass-reinforced handle . Stainless steel blade with gray powdercoat finish . Kydex sheath included . Overall: 9"L . Blade: 4-3/4"L .
Part No: M37K
36" Giant Stick Tiller Extension, StaFast Fitting from FORESPAR Home -> Sailboat -> Tiller & Rudder -> Tillers Extensions & Ac->Giant Stick Tiller Extensions
"Fat 1 ¼" diameter extension allows you to use a light grip for great feel and so your hand doesn’t get fatigued. 48" length is great both for the Laser and U20 sportboat. " Exceptional holding power in a super lightweight blockThe Series 60 is a good choice for Lasers and mainsheets on dinghies, Series 75 is sized for mainsheets on larger, powerful dinghies, skiffs and sportboats of all sizes, or for asymmetrical spinnaker sheets. Machined cheeks and sheave.
Part No: 102225
Poly Webbing Jackline - 45FT from WEST MARINE Home -> Safety -> Safety Harnesses -> Jacklines->Polyester Webbing Jacklines
Move with relative freedom about the boat without detaching your tether! New style features a twelve inch eye sewn using two W stitches at each end. Yellow polyester web boasts a 6000lb. minimum break strength . Normal break strength is 7000lb. . Stretch is 15-22% at 80% break strength . UV resistant . Special dye holds its color even in the harshest marine conditions .
Part No: WMWJL-45
PH and PHE Repair Kit, #PHRK from RARITAN Home -> Plumbing -> Marine Sanitation -> Head Parts->Service Kits & Spare Parts for Raritan Heads
.
Part No: PHRK
Puget Sound Shrimp Pot from WILLAPA Home -> Fishing -> Tackle Boxes & Lures
Puget Sound Shrimp Pot 1/2"x1" 16GA black vinyl coated wire. Four tunnels, 2-way bridle rope and built-in bait tunnel included. Dimensions: 24"L x 24"W x 9"H. Made in U. S.
Part No: 00109
5 Stud Hub, 4-1/2" Dia, 1-1/4" to 1-1/6" Spindle, 14" Wheel, 1350lb Cap from C E SMITH Home -> Trailer & Parts -> Trailer Parts & Carriers->Trailer Hub Kits
These hubs come fully assembled with pregreased bearings, which cuts down on the mess and makes final installation on to the axle much easier.
Part No: 13311
Back Mount Rack Helm from TELEFLEX Home -> Engine Systems -> Steering Systems->Back Mount Rack Helm & Bezel Kit
Single helm replaces 1984 to date Teleflex “The Rack” steering helm without dash modification. For use in almost all sterndrive, inboard and other power-assisted applications where No Feedback steering is not required. Back mount design allows fast and easy installation in dash. Four turns lock-to-lock, standard 3/4" tapered steering shaft. Requires bezel kit, sold separately. Boat Type: Inboards and power-assisted sterndrives . Steering Type: Rack and pinion . Turns Lock-to-Lock: 4 .
Part No: SH5210P
Utility Control Cable - T-Handle End, 5' from TELEFLEX Home -> Engine Systems -> Control Systems->Morse Utility Control Cables
.
Part No: 018873-00-060.0
Belt 18-15116 from SIERRA Sierra's leadership in the marine industry continues with the addition of 20 new belts and 8 new hoses for late model stem drive and inboard application. An industry first, Sierra is excited to announce its new line-up of Serpentine belts. 14 Serpentine belts for late model coverage on Mercruiser V6 and V8 big/small block applications. Belts are polyester corded for long-life and durability. Hoses are molded for exact fit and precise installation.
Part No: 18-15116
187 Series Thermal Circuit Breaker, Panel Mount, 80A from BLUE SEA SYSTEMS Switching and circuit protection in a single device. Self-trimming case eliminates the need for mounting panels or trim bezels and permits easy installation with a standard sized hole saw. Large clearance around 5/16" terminal studs accept heavy gauge wire lugs and allows high-torque connections. Ignition-protected—safe for installation aboard gasoline-powered boats. Interrupt rating: 5000A at 12V DC. Switch Type: Toggle. Safety Features: "Trip Free" design.
Part No: 7042
Riptide Composite PD/AP QRB for RTA-17 from MINN KOTA Home -> Fishing -> Trolling Motors->Parts & Accessories
Minn-Kota Parts & Accessories.
Part No: 1854017
6In Rubbr Single Hump W/Clamps from SHIELDS RUBBER Home -> Engine Systems -> Engine Parts->Marine Rubber Hump Hoses
These rubber hump hoses absorb more engine movement, vibration and misalignment than standard exhaust hose. Install over rigid tubing or pipe using the four included stainless T-bolt clamps (two at each end), downstream from cooling water injection.
Part No: 116-220-6000KIT
Control Handle - Clutch 863PT-55 from EDSON CORPORATION Home -> Sailboat -> Tiller & Rudder->Replacement Control Handles
Highly polished, investment cast stainless steel, marked "Fast-Slow" and "Fwd-Rev". Designed to fit Edson Dual Lever Engine Controls.
Part No: 963PT-55
CP Bronze Left Hand Pull Apart Hinge - 2" H x 3.75" W from PERKO Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks
Use two of the same-handed hinges for quick removal of hatches or covers. Use one each of right- and left-handed as a heavy duty set. Chrome Plated Bronze. Pin Height: 2" by 3-3/4" open width. Each hinge requires four #10 fasteners.
Part No: 0149DP0CHR
5 Stud Hub, 4-1/2" Dia, 1" Spindle, 12" Wheel, 1250lb Cap from C E SMITH Home -> Trailer & Parts -> Trailer Parts & Carriers->Trailer Hub Kits
These hubs come fully assembled with pregreased bearings, which cuts down on the mess and makes final installation on to the axle much easier.
Part No: 13210
Rear Hub Part for ProPulse Propeller 9911 from PRO-PULSE Home -> Engine Systems -> Propellers & Drive Trains -> Composite Props->ProPulse Propeller Spare Parts
Hubs for additional engine types and applications.
Part No: 9311-0
Lid Only with Hinge (No Handle) for West Marine 200SS Propane Kettle Barbecue from MAGMA PRODUCTS Home -> Cabin & Galley -> Barbecues & Tables
Replacement lid for West Marine 200SS Propane Kettle Barbecue; does not include hinge.
Part No: 10-753
CP Bronze Right Hand Pull Apart Hinge - 2" H x 3.75" W from PERKO Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks
Use two of the same-handed hinges for quick removal of hatches or covers. Use one each of right- and left-handed as a heavy duty set. Chrome Plated Bronze. Pin Height: 2" by 3-3/4" open width. Each hinge requires four #10 fasteners.
Part No: 0152DP0CHR
187 Series Thermal Circuit Breaker, Panel Mount, 50A from BLUE SEA SYSTEMS Switching and circuit protection in a single device. Single lever operation. Self-trimming case eliminates the need for mounting panels or trim bezels and permits easy installation with a standard sized hole saw. Large clearance around 5/16" terminal studs accept heavy gauge wire lugs and allows high-torque connections. Ignition protectedsafe for installation aboard gasoline powered boats. Switching and circuit protection in a single device. Waterproof, with recessed mounting holes.
Part No: 7039
Belt 18-15103 from SIERRA Sierra's leadership in the marine industry continues with the addition of 20 new belts and 8 new hoses for late model stem drive and inboard application. An industry first, Sierra is excited to announce its new line-up of Serpentine belts. 14 Serpentine belts for late model coverage on Mercruiser V6 and V8 big/small block applications. Belts are polyester corded for long-life and durability. Hoses are molded for exact fit and precise installation.
Part No: 18-15103
187 Series Thermal Circuit Breaker, Surface Mount, 50A from BLUE SEA SYSTEMS Breaker-Circuit 187 Srf 50A|Breaker-Circuit 187 Srf 50A.
Part No: 7139
Water Waterguard Filter Kit from SHURFLO Home -> Plumbing -> Freshwater Systems->Quick Change Filter Kit
No more "boat water" taste! Enjoy great tasting, healthy, clean water on your boat or RV. Filters chlorine, sediment, lead and cysts. Features easy installation and a no-mess, disposable, quick-twist carbon block filter that you can change in seconds. Kit includes head, cartridge, winterizing diverter, fittings and mounting hardware. Filter is 12"H x 2. 5"W. One year warranty. Ensures drinking water tastes good and is safe to drink.
Part No: RV-QDH1-A
Swing Mount TO 60LB from RAM MOUNTS Home -> Electronics -> Boat Instruments->Swing Mount TO 60LB
Mount electronics to swing out when you need them, fold away when you don't A versatile way to attach radar, sonar, computers and other devices. They can attach on horizontal or vertical surfaces including rails and masts from 1" to 2. 1/2"dia. Attachments are stainless steel and joints have nylon bearing surfaces for easy use. Arms are 6"L and rated to support 65lb. Choose from either a 2" X 6 1/4" end plate that pivots, or a ball and socket for more adjustability.
Part No: RAM-109V
Eye Jaw Toggle, 2-3/32" Interior Depth, 1/2" Pin Diameter from SCHAEFER Home -> Sailboat -> Rigging Products->Stainless-Steel Toggles
For use with marine eyes. Allows standing rigging to align with the tension in the rig. Double jaw style has an extra-deep slot for use with split masthead sheave boxes or chainplates. Eye-jaw design has an extra-deep strap for end-to-end assembly with double jaw toggles or link tangs. Interior depth is measured from pin center. Pin diameters to 5/16'' are Type 304 stainless.
Part No: 93-67
P80 Sitkit Sandpaper Disc, 5" from 3M PRODUCTS Home -> Paint & Maintenance -> Sandpaper -> Sandpaper Discs
The backing provides excellent shelling and tear resistance, thus increasing the life and performance of the disc.
Part No: 21799
Zinc Rudder Anode - 6 1/2"dia x 7/8" thickness from CANADA METALS Home -> Paint & Maintenance -> Zinc Anodes->Canada Metal Rudder Anodes
Canada Metal zincs are composed of an alloy that meets Mil-Spec MIL-A-18001 for sacrificial anodes. This alloy is mostly zinc, but with measurable concentrations of cadmium (~0. 1%) and aluminum (~0. 25%). The additional cadmium causes the anode to erode from the surface inward, which causes a ''sandblasted'' appearance to the surface.
Part No: CMR07
   Company History
   Mission Statement
   Press Room
   Careers at West Marine
   Affiliate Program
   Annual Catalog
   Store Locator
   And More...
   Stock Price
   Press Releases
   SEC Filings
   Email Alerts
   Analyst Coverage
   Management Team
   Financial FAQ
   And More...
   Terms Of Use
   Returns/Exchanges
   Privacy Policy
   Contact Us
   Site Map
   Annual Catalog
   Product Recalls
   And More...
Product offering and prices listed on this website (www.westmarine.com) are limited to Internet and phone orders (1-800-BOATING). Prices on periodic web-only specials apply only to Internet orders. Product offering and/or prices may vary at West Marine retail stores. ©2009 West Marine | All Rights Reservedpics11