Top Sellers
24V Diaphragm Bilge Pump, 10.8gpm, 1" Port from JABSCO
Jabsco Diaphragm Bilge Pumps Self-priming design so you can mount the pump in a convenient location. Each includes a Pumpgard pump strainer (except 10. 8-gpm models). 10.
|
500gph 12V Bilge Pump, 1.9A Draw at 12V DC, 3/4" Port, 4"H x 2-3/8"W from RULE INDUSTRIES
An internal computer chip cycles these pumps on every 2. 5 minutes, then quickly shuts them down if no water is detected. Built-in strainer bases snap off to make cleaning easy. Completely submersible, rust-proof, corrosion-proof and ignition-protected. Three-way wiring enables connection to a switch for manual override or indicator light. Small 500gph pump is designed to handle spray and rainwater. Built-In Switch: Yes, cycles every 2. 5 min.
|
500 RC Windlass, 600lb. Max. Pull, Boat Length 35', 1/4"HT Chain, 1/2" Rope Rode Size, 62'–Chain; 45'–Rope Speed Up/Min., 60' Speed Down/Min., 60A–75A @12V Draw from MAXWELL
These low-profile windlasses feature a patented tension system that maintains resistance required to feed chain/rope rode into the locker instead of jamming it in the windlass. Designed for easy installation, the motor can be oriented in any of 12 positions below decks. Two pieces bolt together quickly. Gasketed, watertight base. For decks to 2 3/4" thick. Capstan models and extra-long shafts for thick decks are available by Special Order. Style: Vertical . Rode Type: Rope/chain .
|
CARB GASKET KIT from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Water Circulating Pump - #18-3599 - Volvo #3851982-3, 3853850; Mercruiser #811841, 850399, 850399-1 from SIERRA
Water Pumps The water pump is the heart of your inboard or I/O cooling system. All Sierra pumps are bidirectional and can be installed on reverse rotation engines. The pumps are also powder coated for additional protection. Includes mounting gasket. Pumps include brass bi-directional impellers, brass plugs and fittings, carbon resin seal, all mounting gaskets, stainless steel seal cup and spring, stainless steel back plate (where required), and powder coating for maximum corrosion protection.
|
Yamaha Carb Kit from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Replaces OMC P/N 378444 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
For Chrysler/Force, 89-817109A2 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
|
|
|
|
|
Gasket 1189-0000 from JABSCO
Jabsco gaskets & gasket kits.
|
30GPH Cartridge, Replaces Racor S3240 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
|
|
|
Impeller Kit - Neoprene (K) 2-1/4x2 from JABSCO
JABSCO Impellers Tough, long-lasting replacement impellers from the inventors of the flexible impeller pump. Use neoprene for most water-pumping applications.
|
Lower Unit Seal Kit from SIERRA
Sierra 18-2623 OMC Gear Housing Seal Kit.
|
|
Gasket from SIERRA, Pump from SIERRA, 2" from JABSCO
|
|
Home -> Seating & Covers -> Covers & Biminis -> Bimini & Cover Hardware->Bimini Support Poles (Pr)
Keep your Bimini up off the gunwales when not in use. A pair of support poles replaces aft tensioning straps. 377820 Adjusts from 28''-48". 271380 is 40" fixed .
Part No: 11995
|
|
|
|
Home -> Electrical -> Interior Lighting->Digital Dimmers
Rated for dashboard guage or small single fixture interior dimming Continuous voltage control from 0 to 100% of input voltage Last setting memory; power returns to previous setting with optional ON/OFF switch Supports multiple switches in different locations –20°C to +85°C operating temperature range Water resistant, sealed housing Operates on 10 to 32 Volt DC systems Requires SPDT momentary (ON)-OFF-(ON) switch.
Part No: 7502
|
|
|
|
Home -> Cabin & Galley -> Containers & Storage
Comes assembled. Bulkhead-mount. 5"H x 6"D x 21"L.
Part No: 62554
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers -> Wheels & Tires->Trailer Tires & Wheels
Boat and camper tires take a real pounding on the road and long periods of storage can cause deterioration. These affordable replacement tires meet Department of Transportation Standards. Tires beginning with ST are special trailer tires with stiffer sidewalls to improve trailer stability and reduce sway. Select bias ply with galvanized, painted or chrome rims, spoked or solid, in a variety of sizes. For heavier loads and/or trailers used over long distances, we recommend radial tires.
Part No: 16575
|
|
|
|
Home -> Anchor & Docking -> Anchors->Anchor Kits
Two economical kits to satisfy anchoring needs Basic Hooker Kit includes 5lb. Quick Set Anchor (with slip ring shank), 100' x 3/8"dia. nylon rode with thimble plus 4' x 1/4"dia. galvanized chain and two 5/16" shackles. Super Hooker Anchor Package includes Super Hooker 14lb. Anchor, 100' x 3/8"dia. nylon line, 6' x 1/4"dia.
Part No: 95090
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Lower Shift Cable Kits
Worn shift cables can cause shifting difficulties. The result can be damage to your gears. If your boat is hard to shift try our new Extreme Shift Cables for the best in effortless shifting. Kit parts with an E suffix use Extreme Shift Cables or are components of Extreme Shift Cable kits. Shift cable kits include all gaskets, bellows, and ends required for installation. Caution: some older models may have been retrofitted to accept aft installation cables.
Part No: 18-2603
|
|
|
|
Home -> Paint & Maintenance -> Zinc Anodes->Streamline Collars
Streamline Collars Easy size verification inside and outside. Stainless steel Allen cap screws available upon request. 650 50 SL-0875 7/8" 1-7/8" 1-7/8" 0. 000 50 SL-1125 1-1/8" 2" 2-1/4" 0. 975 50 SL-1250 1-1/4" 2" 2-3/8" 0. 980 50 SL-1375 1-3/8" 2-1/2" 2-5/8" 1. 650 32 SL-1500 1-1/2" 2-5/8" 2-3/4" 1. 765 32 SL-1750 1-3/4" 3" 2-1/4" 2.
Part No: SL-2750
|
|
|
|
Home -> Engine Systems -> Control Systems -> Control Cables->TFXtreme 3300 CC Performance Cables
3300 CC = 3" travel, 10–32 ends.
Part No: CC63323
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Super Gard™ Fenders
These fenders will stand up to anything and stand out in a crowd TaylorMade Products has incorporated the latest in technology, design innovation, and attention to detail to bring you the finest looking, top performing protection for your dollar. Super Gard™ fenders can take the toughest abuse your boat can hand out. Seamless one-piece construction with ribbed sides minimizes roll, and a molded-in valve ensures easy inflation and long life. Double molded black ends for extra strength.
Part No: 959824
|
|
|
|
Home -> Safety -> Man Overboard Gear->Crew Overboard Pole Accessory - Backstay Mount Sleeve
Blue acrylan flag sleeve for the Backstay mount crew overboard pole (Model 317883).
Part No: 156003
|
|
|
|
Home -> Plumbing -> Fittings & Valves->ARG-Series Strainer Parts & Repair Kits
ARG-Series Strainer Parts & Repair Kits Baskets: Stainless steel or nylon. Sight glass.
Part No: PS-85-G
|
|
|
|
Home -> Engine Systems -> Control Systems -> Control Cables->33C Supreme Red-Jacket Cables
The 33C Supreme has an inner core that's encased in nylon and travels back and forth in a high density polyethylene liner. This plastic against plastic movement decreases friction and increases efficiency by 45% over other push-pull cables. 100% interchangeable with 33C cables. Tight 4'' minimum bend radius capability. Cable adapter kits available for use with Mercury, Mercruiser, Johnson/Evinrude, and OMC sterndrive. . 3'' travel.
Part No: 301947-03-288.0
|
|
|
|
Home -> Plumbing -> Bilge Pumps->Impellers
JABSCO Impellers Tough, long-lasting replacement impellers from the inventors of the flexible impeller pump. Use neoprene for most water-pumping applications.
Part No: 5616-0001-P
|
|
|
|
Home -> Fishing -> Fishing Accessories -> Rod Holders
Keep rods and tools ready for action!Stainless caddys and rodholders are stylish alternatives to teak or poly organizers. Fabricated from 304 polished stainless with injection molded ABS inserts to keep tools protected. Stainless steel mounting hardware included. Knife and Pliers Caddy keeps these essential tools safe and convenient in the cockpit or cabin.
Part No: 2221-0
|
|
|
|
Home -> Anchor & Docking -> Anchors->Richter Anchor
A tournament-tested anchor for lake fishing The Richter Anchor design came into existence several years ago with a design to fit the needs of anglers fishing for walleye in northern Wisconsin. The Richter Anchor design has an aggressive fluke pattern, and centered weight with the addition of a release bar that makes the anchor near 100% retrievable. Material: PVC-coated, galvanized iron/steel . Application: Most bottom types . Best Use: Small craft in protected areas; similar to river anchor.
Part No: 625-B
|
|
|
|
Home -> Electronics -> VHF Radios & Communications->Remote Control Microphones
Icom replacement microphones for the Icom M604 VHF.
Part No: HM-126RB
|
|
|
|
Home -> Plumbing -> Marine Sanitation->Holding Tanks
1520) requirements. Standard Tanks feature a multiple port arrangement that enables use as a sanitation holding tank or for potable water storage. They include two 1 1/2" fill/drain ports and two 1/2" vent/supply ports. Designed for waste storage, each includes two 1 1/2" ports for inlet and drain and one 1/2" vent port. Both Standard and Heavy-Duty Tanks feature threaded NPT ports that are molded in to eliminate stress cracks and leaks. One year warranty.
Part No: 85-1531WH
|
|
|
|
Home -> Sailboat -> Rigging Products->Norseman Swageless Fork Terminals
Norseman Swageless Terminals provide a completely secure end fitting on conventionally constructed strand, Dyform strand or 7-strand wire. They can be rigged at sea in minutes without special tools and can be inspected simply by unscrewing the assembly. The standard terminal can be used on 1x19 strand, 1x19 Dyform and 7-strand rope, using the appropriate cones. 316 stainless steel. Hole center to wire end. Terminals are reusable, but they must have a new cone.
Part No: N020-0812
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Gasket-Head|**Gasket-Head.
Part No: 18-2811
|
|
|
|
Home -> Engine Systems -> Engine Parts->Manifold Cover Plates
Fits Chris Craft, Crusader, Mercruiser, OMC/Cobra sterndrive, Pleasurecraft and Volvo Penta.
Part No: 18-4009
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers -> Trailer Brakes/Axles->Axle Brake Line Kits
Essential parts for trailer brakes Designed to be used on trailers using either surge brake actuators or power brake actuators (vacuum/hydraulic, air/hydraulic, electric/hydraulic). DOT/flexible hoses approved for use on all trailer brakes. All fittings are corrosion resistant brass .
Part No: 80326
|
|
|
|
Home -> Interior, Flags & Gifts -> Flags & Staffs -> Flag Accessories->Deluxe Rail Mount Staffs
Deluxe Staffs Stainless steel staff mounts quickly, without rail disassembly, thanks to the special stainless steel clamp. Includes adjustable pennant mounts and clips.
Part No: PS1701
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cleats & Chocks->Stainless-Steel Yacht Cleats
Sleek, modern design makes decks look stylish while providing the ultimate in corrosion protection when anchoring or docking.
Part No: C3142-0000
|
|
|
|
Tapered style tube is fabricated of a fixed clamp constructed of 316 stainless steel in either horizontal or vertical mounting. Available in high polish stainless steel or gold titanium finish with heavy duty white vinyl liner for rod protection. all calmp-on rod holders are sized for aluminum pipe which is different from standard stainless tube. Tube ID 1.
Part No: 99M 88185
|
|
|
|
Home -> Boats & Motors -> Inflatable Boats->Stand-Off Bars for TipUp Glueless Davit System
Stand-Off Bars for TipUp Glueless Davit System These stand-off bars, sold individually, give your TipUp Glueless Davit System a custom fit on your swim platform. Components are top-quality polished 304 and 316 stainless steel . Stand-off bars are available separately to enable the dinghy to be carried more vertically .
Part No: 928
|
|
|
|
Home -> Anchor & Docking -> Anchors->Horizon™ Claw Anchors
Remains stable even when tide and wind conditions changeConstructed of heat-treated high-tensile steel in a single-piece design that’s very effective in a variety of seabeds. It remains stable under a wide range of tide and wind conditions. Stows easily on a bow roller. Lifetime warranty against breakage. Material: High-tensile steel . Application: Most bottom types . Pros: Inexpensive relative to similar designs. Quickly and reliably sets in most seabeds. High-strength one-piece design.
Part No: 0057910
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Tune Up Parts->Ignition Tune-Up Kits
Complete kits include cap and rotor, contacts and condenser if required. Tune-up kits have everything that the complete kits have, except for the cap.
Part No: 18-5272
|
|
|
|
Home -> Paint & Maintenance -> Scrub Brushes & Hoses->Hookit SBS Compounding Pad
Easy-to-change pad achieves exceptional resultsEasy-to-change compounding pad for use with Hookit™ SBS™ Backup Pad. Fits standard 5/8"-shaft polishers. Fit all standard 5/8"-shaft, slow-speed buffers.
Part No: 05717
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Marine Enamel Topside Paint
Dependable marine enamel for above-the-waterline applicationModified, long-oil alkyd enamel with excellent durability and gloss retention. For wood, fiberglass, aluminum or steel. For use above true waterline. Base Formulation: Traditional alkyd marine enamel . Recommended Application Method: Brush, roller, conventional/airless spray . Number of Coats Recommended: Two coats minimum . ; to overcoat: 8 to 24 hrs. . Primer Needed: Z-Spar 105 Enamel or A-628 Hi-Hide Undercoat Coverage: 500.
Part No: 8310506
|
|
|
|
Home -> Engine Systems -> Engine Parts
Removes oil vapor to improve turbo performance Make your Mercruiser 1. 7 Diesel perform like never before with this hybrid air filter. This disposable unit has a built-in AIRSEP feature to remove some of the oil vapor that would normally degrade air intakes and turbocharger performance. Rated for 250–500 hours, this unit replaces the stock plastic intake guard.
Part No: 90-1372
|
|
|
