Top Sellers
CARB GASKET KIT from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Yamaha Carb Kit from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Replaces OMC P/N 378444 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
For Chrysler/Force, 89-817109A2 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
Lower Unit Seal Kit from SIERRA
Sierra 18-2623 OMC Gear Housing Seal Kit.
|
Water Circulating Pump - #18-3599 - Volvo #3851982-3, 3853850; Mercruiser #811841, 850399, 850399-1 from SIERRA
Water Pumps The water pump is the heart of your inboard or I/O cooling system. All Sierra pumps are bidirectional and can be installed on reverse rotation engines. The pumps are also powder coated for additional protection. Includes mounting gasket. Pumps include brass bi-directional impellers, brass plugs and fittings, carbon resin seal, all mounting gaskets, stainless steel seal cup and spring, stainless steel back plate (where required), and powder coating for maximum corrosion protection.
|
Johnson/Evinrude Outboard Starter, 120 to 140hp V4 (1985-99), 10 tooth drive gear from SIERRA
Sierra's new and remanufactured starters are the only marine starters that meet Marine UL standards. Sierra's remanufactured starters all have new solenoids, drives, bushings, brushes and springs. The bodies are powder coated for greater corrosion resistance. Sierra has entered an agreement with United Technologies to market their complete line of outboard starters and components. All are 100% load tested . Our remanufactured starters are covered by Sierra's customer satisfaction warranty .
|
30GPH Cartridge, Replaces Racor S3240 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
|
Exhaust Tube, Mercruiser from SIERRA
Replacement for Mercruiser Inboard/Outboard #32-90949T .
|
33C Red Jacket Cable, 18' from TELEFLEX
The most widely used cable type in the world. 8" minimum bend radius. Cable adapter kits available for use with Mercury, MerCruiser, Johnson/ Evinrude, and OMC sterndrive. 3" travel.
|
Sierra-Tube-Exhaust from SIERRA
Some larger V-8 engines that create a large amount of back pressure use exhaust tubes rather than bellows. This helps to relieve the excessive pressure and eliminate problems with premature bellows failure. In the past, the exhaust bellows would blow up like a balloon and cause the drive shaft bellows to rub against the yoke and U-joints causing holes in the bellows.
|
|
|
|
|
Prop Nut Kit, Yamaha 40-50HP from SIERRA
An excellent emergency item to carry in your toolbox, for those occasions when the prop nut is misplaced or lost.
|
Prop Nut Kit, Yamaha V4/V6 from SIERRA
An excellent emergency item to carry in your toolbox, for those occasions when the prop nut is misplaced or lost.
|
|
32' from TELEFLEX, Red from TAYLOR, Sealkit from SIERRA, Socket from SIERRA
|
|
Home -> Anchor & Docking -> Fenders & Docking->Survivor Series Fenders
.
Part No: 854824
|
|
|
|
Home -> Engine Systems -> Control Systems -> Engine Controls->KE-4 Electronic Remote Control System
This longlasting control has been extensively tested, and performs well in excess of a typical mechanical system. Features fail-safe operation, self-diagnosis system, control head with built-in station select switch, neutral warm up provision, optional mechanical backup, overload protection. Use one control unit and one actuator for single engine boats with up to four pilot stations. Use two control units for two engine boats with up to four stations. Call 1-800-BOATING for more information.
Part No: NM0617-20
|
|
|
|
Home -> Cordage -> Rigging Products->Tubular-Body, Stainless-Steel Turnbuckles
Series 03 and 04 include LH upper terminals (unless designated RH).
Part No: 06-117
|
|
|
|
|
Home -> Engine Systems -> Engine Parts
**SealKit-Steering Cylinder|**SealKit-Steering Cylinder.
Part No: 18-2700
|
|
|
|
Home -> Foul Weather Gear & Jackets -> Foul Weather Gear -> Foul Weather Gear->Workwear Cargo Bib
Lined with nylon taffeta, hammer loop on right leg, and double layer knee reinforcements. Sized to wear over your existing pants. Large cargo pockets on thigh with hook and loop closure. Gusseted leg opening with snap storm flaps.
Part No: BROWN-M
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Epoxy Resin->Penetrating Epoxy
Repairs dry-rotted wood and restores its strengthTwo-part liquid epoxy deeply penetrates, saturates and seals dry-rotted wood, actually restoring its structural strength. Repair transoms, decking, stringers and molding. Also stops hidden leaks. Can be sanded and painted. 2:1 mix ratio (by volume). Formulation: Two-part penetrating epoxy sealer . Recommended Usage: Sealing and isolating dry-rot . Drying: Work window of 60 min. , overnight curing .
Part No: RM382K
|
|
|
|
Home -> Engine Systems -> Engine Instruments
Quartz Analog Clock Style: Professional Red. Size: 2". Weight: .
Part No: 14652
|
|
|
|
Home -> Engine Systems -> Control Systems->33C Red Jacket™ Control Cables
The most widely used cable type in the world. 8" minimum bend radius. Cable adapter kits available for use with Mercury, MerCruiser, Johnson/ Evinrude, and OMC sterndrive. 3" travel.
Part No: 032377-03-384.0
|
|
|
|
Home -> Seating & Covers -> Seating->Millennium 2000 Seat Swivel/Slide System
The easy-to-use aluminum Mill 2000 system combines dual Quick-Lock handles, for stable, wobble-free support; a positive lock-action slide, with 6" fore-and-aft travel; and a swiveling spider, with 4-prong, 360° rotation, for smooth operation. Slider plate is 13 3/4" x 8" with a 5" x 12" mounting hole pattern. Use with 2 7/8"dia. fluted pedestals only, including the PosiPin-type that secures the stanchion at specific 1" increments with a spring-loaded pin.
Part No: 75530:02
|
|
|
|
Home -> Sailboat -> Rigging Products->Hi-MOD Compression Forks
These slim Hi-MOD compression fittings are at least as strong as the rated breaking load of the rigging wire, and they work equally well with right/left hand lay wire. " The shallow angled cone establishes direct mechanical grip on the wire's core and all the outer strands. Constructed from 316 stainless steel, with aluminum/bronze crown rings, they can be taken apart for maintenance and re-used without the need for new parts (provided that no overloading has occurred).
Part No: 12CTF932
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Epoxy Resin->MAS Slow Hardener
When used in conjunction with MAS Epoxy Resin it provides high reactivity and an extended gel time which allows for controlled and extended application periods. Special features exhibited by this product include blush free surfaces, good ultraviolet stability, smooth finishes in cured films, excellent osmotic resistance, and the ability to cure under high humidity. The low viscosity of MAS Slow Hardener (200-250 poise) when mixed with MAS resin is ideal for fast wet-out of reinforcing fabrics.
Part No: 30-026
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
We're revolutionizing the marine industry standards for topside fuel tanks, providing engineering that looks and performs better than any other fuel tanks available. Includes mechanical direct-sight gauge with easy-to-read indicator. Specifically designed for use in Boston Whalers, Carolina Skiff and Key West bench style, center console, pontoon, deck and jon boat designs. - VPN - 008189 008190 008191 - WM SKU - 10798924 10798932 10798940 - Gal/Litre - 9 / 34 12 / 45 12 / 45 - Dimensions - 22.
Part No: 008191
|
|
|
|
Home -> Fishing -> Fishing Accessories->Replacement Part Kits and Spare Parts
Replacement parts for Scotty Downriggers.
Part No: 1028
|
|
|
|
Home -> Safety -> Life Jackets -> Children's Life Jackets->Kids' Watersports Vests
Designed with the same attention to fit and quality as their adult vests, O’Neill’s lightweight Youth, Child, and Infant vests offer minimal bulk and mesh drainage so your kids won’t get bogged down while wearing them. Overlock-stitched with bullet-proof seams for outstanding durability without compromising comfort. USCG Type: III (Infant size: Type II). Features: Lightweight, quick-drying; UV protection; Mesh drainage. Flotation Materials: Fluid Foam. Closure: Quick-Release Buckles; Zipper.
Part No: 3306-J39-1SZ
|
|
|
|
Home -> Safety -> Fire Extinguishers -> Fixed Extinguishers->Manual Release Cable Kits
Select length according to application Includes stainless-steel cable, pull handle, safety pin, panel mount escutcheon plate, tie and instructions.
Part No: E-4209-12
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Super Gard™ Fenders
These fenders will stand up to anything and stand out in a crowd TaylorMade Products has incorporated the latest in technology, design innovation, and attention to detail to bring you the finest looking, top performing protection for your dollar. Super Gard™ fenders can take the toughest abuse your boat can hand out. Seamless one-piece construction with ribbed sides minimizes roll, and a molded-in valve ensures easy inflation and long life. Double molded black ends for extra strength.
Part No: 955824
|
|
|
|
Home -> Plumbing -> Freshwater Systems->Groco Service Kits and Repair Parts
Groco Replacement Parts and Service Kits We stock an extensive selection of parts and service kits for virtually all products. In addition, we can quickly get any part you need to repair your Jabsco, SHURflo, Raritan or Groco equipment directly from the manufacturer through our Special Order department. If you know the part number you need simply order the part using the Model or manufacturer's part number. If you don't know either number, please call us for assistance.
Part No: HF REGULAR
|
|
|
|
Home -> Fishing -> Trolling Motors->Trolling Motor Accessories
West Marine carries all your Minn Kota trolling motor accessories.
Part No: 1854030
|
|
|
|
Home -> Paint & Maintenance -> Zinc Anodes->Streamline Collars
Streamline Collars Easy size verification inside and outside. Stainless steel Allen cap screws available upon request. 650 50 SL-0875 7/8" 1-7/8" 1-7/8" 0. 000 50 SL-1125 1-1/8" 2" 2-1/4" 0. 975 50 SL-1250 1-1/4" 2" 2-3/8" 0. 980 50 SL-1375 1-3/8" 2-1/2" 2-5/8" 1. 650 32 SL-1500 1-1/2" 2-5/8" 2-3/4" 1. 765 32 SL-1750 1-3/4" 3" 2-1/4" 2.
Part No: SL-3000
|
|
|
|
Hard to find accessories and replacement parts for Igloo products White seat cushion for 128 quart model.
Part No: 8498
|
|
|
|
Home -> Safety -> Life Jackets
Mustang Inflatable PFD with Lift™ Rearming Kit Style: Auto Hydrostatic. Cylinder Weight: 38g. Cylinder Neck Diameter: Sealed to inflator. Inflator Type: Hammar1F. Kit Contents: Hydrostatic inflator cap, cylinder, key. PFD Brands Commonly Used With*: Mustang Inflatable PFD with Lift™ . Inflator Number: MA7218. *The term "PFD Brands Commonly Used With" is not all inclusive. Rearming Kits may be used with other brands and vests.
Part No: MA7218
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting -> Navigation Lights->5500 Series LED All-Around Navigation Lights
Built to stand the test of time All-around pole lights feature articulating heads that adjust from 15° fore to 15° aft to fit all base angles and typical deck installations. Two-pin locking collar is removable to allow use in almost any base. 8 watts at 12V DC—one of the lowest power draws of any two-mile All-Round light on the market today! Rated for 50,000+ hours of use. 4'. Type: Universal replacement white all-around light . Case Material: Black plastic . Mounting Hardware: Not included .
Part No: 5530-42-7
|
|
|
|
Home -> Engine Systems -> Engine Parts->Marine Rubber Exhaust Elbows
Exhaust hose elbows let your wet-exhaust line make tight turns without kinking. They provide excellent tolerance to engine heat, vibration and back pressure. Install over rigid tubing or pipe using the four included stainless T-bolt clamps (two at each end). Not intended for hose-to-hose connections. Lubricate with water or detergent. 250°F max.
Part No: 16-245-5000KIT
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains
**Center Socket|**Center Socket.
Part No: 18-6404
|
|
|
|
Home -> Engine Systems -> Engine Instruments
Clock - quartz analog Style: Dress White . Size: 2" . Weight: . 30 Lbs.
Part No: 13152
|
|
|
|
Home -> Cabinet & Deck Hardware -> Deck Plates & Storage -> Fixed Storage
Convenient storage pocket with cargo netting keeps your gear contained and accessible. Install this box in a dry area or to seal it with enough silicone to ensure that any water that comes through the netting attachment holes will not go inside the boat. Glossy acrylic capped ABS plastic with UV protection.
Part No: 49800800
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers->PXR Camcleats
PXR—the cleat you tune for the way you race Designed for precision control, these cleats feature an adjustable release spring that allows you to control how easy the camcleat is to release—an industry first. The incorporated three-stage release spring can be pre-set for the prevailing conditions and application. Harder settings for halyards and occasionally adjusted lines. While sailing, the roller action of the PXR keeps the release effort easy, even as the wind strength increases.
Part No: PXR0810/SW
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
We're revolutionizing the marine industry standards for topside fuel tanks, providing engineering that looks and performs better than any other fuel tanks available. Includes mechanical direct-sight gauge with easy-to-read indicator. Specifically designed for use in Boston Whalers, Carolina Skiff and Key West bench style, center console, pontoon, deck and jon boat designs. - VPN - 008189 008190 008191 - WM SKU - 10798924 10798932 10798940 - Gal/Litre - 9 / 34 12 / 45 12 / 45 - Dimensions - 22.
Part No: 008190
|
|
|
|
Home -> Fishing -> Fishing Accessories->Gold Clamp on Rod Holder
Tapered style tube is fabricated of a fixed clamp constructed of 316 stainless steel in either horizontal or vertical mounting. Available in high polish stainless steel or gold titanium finish with heavy duty white vinyl liner for rod protection. all calmp-on rod holders are sized for aluminum pipe which is different from standard stainless tube. Tube ID 1.
Part No: 88184-1
|
|
|
|
Home -> Plumbing -> General Purpose Pumps->Impeller Puller Tools
Impeller Puller Tools Simply tighten the tool’s grip fingers into the rubber hub of the impeller and turn the extraction screw clockwise to pull the impeller out of the pump.
Part No: 50070-0040
|
|
|
