$100 Gift Card from WEST MARINE
Not sure what to get for your favorite boater? Give the West Marine Gift Card! Use our Gift Card at more than 370 West Marine stores, online, or through our catalog at 1-800-BOATING for merchandise purchases and backorder or special order deposits. . SHIPPING NOTICE: Gift Cards shipping ground delivery will ship 1st Class Mail to any US address FREE. For an additional fee, Gift Cards may be shipped via US Priority Mail, Two-Day or Overnight service. The Gift Cards cannot be redeemed for cash.

Deck Fill Cap, Gas/Diesel/H20 from WEST MARINE
Stainless steel, durable cast heads for 1995 and later West Marine Deck Fills.

Quick Release Pin, 3/8 D X 1 from WEST MARINE
Positive locking ping with one-hand release won't dislode accidentally. Corrosion-resistant stainless steel Grip length is the distance from the shoulder to the locking ball bearings Made in U. S. A.

Manual Oil Change Pump from WEST MARINE
"We don’t know anyone who looks forward to changing engine oil, but this pump should make the job a little easier. The handle makes it easy to carry the goo to a harbor recycling location or your local gas station that accepts used oil. Your engine will appreciate it!" Improved durability and capable of inflating high-pressure This value-priced oil changer makes changing oil a snap! Simply place the transfer probe down the dipstick tube and start pumping.

Cotter & Clevis Fastener Kit from WEST MARINE
A 66-piece assortment of cotter rings ranging from 3/8" to 7/8" diameter to fit clevis pins from 3/16" to 3/8"; cotter pins from 1/16" x 3/4" to 1/8" x 1-1/2"; and clevis pins from 3/16" x 3/4" to 3/8" x 1".

G. O'Day 222/Santana 525,Length 47", Height at tip 2 1/4", Width at butt 1 1/2", Width at tip 2" from WEST MARINE
Replace that old ugly tiller with a new hand-made laminated ash and mahogany wood tiller, made to fit your rudder hardware, and pre-finished with multiple coats of premium marine spar varnish. Choose the right length and profile, and the butt-end measurements to fit your rudderhead hardware. Can’t find a good fit? Idasailor Marine can custom-build a tiller to your measurements . Custom tillers are shipped direct within 10 days . Click HERE to open the PDF custom order form.

Lube Tube Adapter for Yamaha, Nissan, Tohatsu, Honda (2-50hp) from WEST MARINE
Marine lower unit drain, flush and fill tool. Metal threaded fitting fits MerCruiser, OMC, Evinrude, Johnson, Honda (70-90hp), Volvo, Force and Gamefishier lower units. Quick, easy and clean way to change marine lower unit gear lube. For use with all 8- and 10-oz.

Stainless Strap Hinge, 2 5/8 inch from WEST MARINE
Type 304 electro-polished. Gauge: 0. 060 stainless steel. Drilled and countersunk for #8 fasteners (not included). Sold in pairs. ShWt .

Small, Fits Spreader Tips 1-1/2" x 1/2", Shrouds to 1/8" from WEST MARINE
Protect your sails from ripping or tearing on your boat’s spreaders with these soft injection-molded UV-resistant synthetic rubber spreader boots. They fit wing and round spreaders, feature a smaller frontal area for less wind resistance and have greater surface area on the end to reduce sail chafing. They install quickly and easily over spreader ends and shrouds, and secure with self bonding rigging tape, Model 318600 (sold separately).

Large Funnel - 5GPM, 10"H x 8-1/2"Dia., 100 Micron from WEST MARINE
Fuel/Water Separator These filters were tested by Powerboat Reports (March 2003) and rated better than other more expensive funnels. Teflon-coated, stainless-steel filter separates water and dirt from gasoline, diesel and kerosene fuels. Made from industrial standard electroconductive polypropylene that can be grounded for extra safety. Tested and rated by Powerboat Reports (March 2003) better than other more expensive funnels. Separate water and dirt from gasoline, diesel and kerosene fuels.

Flush Ring Pulls -Brass 1 7/8" x 1 1/2", Pair from WEST MARINE
Great for lifting hinged deck hatches Highly polished brass or chrome with recessed centers.

Acetal Thru-Transom Scupper from WEST MARINE
Attwood Acetal Thru-transom Scupper One-way rubber flapper valve and thru-hull fitting. For use with 1 1/2'' ID hose. Overall length: 6 1/4'' Installation hole size: 2' Max.

Clamp-On Rod Holder - 1 1/4"ID Horizontal, Gold from WEST MARINE
Silver or gold tubes are anodized for long life in the marine environment. Fabricated from cold drawn aluminum with no unsightly weld seams. Available in aluminum schedule pipe sizes 3/4" thru 1 1/4" in horizontal and vertical models. If using stainless steel tube, please go down 1/4" in size. Type:Clamp on. # of Rods:One. Material:Aluminum. Lining:White vinyl. Diameter:Rod holder is 1 5/8" ID. Mount:Clamp on.

High Security Outboard Lock from WEST MARINE
Polished 316 Stainless Steel high security key locks with anti-drill protection secure outboards to your boat. Bolt Lock model’s backing plate installs under engine transom nut and fits up to 1/2" engine bolts. Bar Lock model fits most outboard engines with turnbuckle installations. Noise dampeners reduce rattle.

Penetrating Epoxy - 16 oz from WEST MARINE
Repairs dry-rotted wood and restores its strengthTwo-part liquid epoxy deeply penetrates, saturates and seals dry-rotted wood, actually restoring its structural strength. Repair transoms, decking, stringers and molding. Also stops hidden leaks. Can be sanded and painted. 2:1 mix ratio (by volume). Formulation: Two-part penetrating epoxy sealer . Recommended Usage: Sealing and isolating dry-rot . Drying: Work window of 60 min. , overnight curing .