Top Sellers
Sea-Lect Diverter Y-Valve, 1/2" from GUZZLER/BOSWORTH
Simple and compact, with full-port openings that won’t restrict flow. Epoxy-coated aluminum handles and Delrin bodies.
|
CARB GASKET KIT from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Yamaha Carb Kit from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Replaces OMC P/N 378444 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
Impeller, 18-3062 from SIERRA
Recommended replacement schedule is every 3 years for fresh water and every year for salt water Click to view a Sierra Impeller Application Chart (PDF) For further assistance, have your year & model information handy and call our Product Advisors at 1-800-BOATING.
|
For Chrysler/Force, 89-817109A2 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
Exhaust Flapper Valve - 4" from SIERRA
Heavy duty rubber flapper valve keeps following seas from entering exhaust outlet when moving slowly or stopping.
|
Johnson/Evinrude Outboard Starter, 120 to 140hp V4 (1985-99), 10 tooth drive gear from SIERRA
Sierra's new and remanufactured starters are the only marine starters that meet Marine UL standards. Sierra's remanufactured starters all have new solenoids, drives, bushings, brushes and springs. The bodies are powder coated for greater corrosion resistance. Sierra has entered an agreement with United Technologies to market their complete line of outboard starters and components. All are 100% load tested . Our remanufactured starters are covered by Sierra's customer satisfaction warranty .
|
30GPH Cartridge, Replaces Racor S3240 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
|
60GPH Cartridge, Replaces Racor S3227 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
|
10 Micron Replacement Filter Element for OMC 502905 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. Today’s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage.
|
Power Pack - Johnson/Evinrude -18-5758 from SIERRA
Replacement part for Johnson/Evinrude Outboard #582453, 583380 OEM #0582452.
|
Water Circulating Pump - #18-3581 - Chrysler Inbd # 3004886, 3619542, 3619859, 3745985 from SIERRA
Water Pumps The water pump is the heart of your inboard or I/O cooling system. All Sierra pumps are bidirectional and can be installed on reverse rotation engines. The pumps are also powder coated for additional protection. Includes mounting gasket. Pumps include brass bi-directional impellers, brass plugs and fittings, carbon resin seal, all mounting gaskets, stainless steel seal cup and spring, stainless steel back plate (where required), and powder coating for maximum corrosion protection.
|
|
|
|
|
|
Valve from SIERRA, 2" from GUZZLER, Cobra from SIERRA, L from JOHNSON
|
|
Home -> Plumbing -> Fittings & Valves->Sea-Lect Diverter Valves
Simple and compact, with full-port openings that won’t restrict flow. Epoxy-coated aluminum handles and Delrin bodies.
Part No: Y-M-95-24B-HDT
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports->Access Hatches with Slam or Cam Latches
Ideal for all types of storage Flanged, weather-tight, O-ring sealed hatches are ideal for all types of storage, bait or fish well, and electrical or fuel line access. Low-profile design with radiused corners, clean-skirted edges and hidden fasteners. Integral 180° hinges with a slam or cam latch system to assure perfect alignment and ease of installation. Optional liners drop into flange opening. Type: Access hatch . Material: Glass-filled polypropylene . Hinges: 180° non-locking hinges .
Part No: 44330
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Bronze Mushroom Head Assembly, Barbed 90º
Allows hose to be connected to thru-hull in tight spaces above the waterline. Ideally suited for generator exhaust outlet, fish box drain, cockpit drain and air conditioning outlet. Patented design simplifies installation, lowers cost and improves the integrity of the connection. Features a unique bonding tab for protection against galvanic corrosion. 85-5-5-5 bronze.
Part No: 65BF858
|
|
|
|
Home -> Cordage -> Rigging Products->Tubular-Body, Stainless-Steel Turnbuckles
Series 03 and 04 include LH upper terminals (unless designated RH).
Part No: 08-110
|
|
|
|
Home -> Engine Systems -> Engine Parts->WICOR/SHERWOOD Pump Service Kits
Kits and replacement parts for servicing a number of Wicor/Sherwood pumps.
Part No: 23979
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper->Hookit Imperial Sanding Discs
3M's premier Imperial abrasive discs feature the original Hookit™ attachment system. Convenient hook and loop system maximizes disc life by giving the user the ability to change grits without contaminating disc backing or dual action pad face. "Imperial 6" E-weight backing provides faster, more aggressive cut. Hookit™ 8" Regular No-Hole, E-Weight Paper Backing, 25 Disc Qty. Hookit™ Regular No-Hole E-Weight Paper Backing, 25 Disc Qty.
Part No: 01816
|
|
|
|
Home -> Anchor & Docking -> Anchors -> River/Lake Anchors->Richter Anchor
A tournament-tested anchor for lake fishing The Richter Anchor design came into existence several years ago with a design to fit the needs of anglers fishing for walleye in northern Wisconsin. The Richter Anchor design has an aggressive fluke pattern, and centered weight with the addition of a release bar that makes the anchor near 100% retrievable. Material: PVC-coated, galvanized iron/steel . Application: Most bottom types . Best Use: Small craft in protected areas; similar to river anchor.
Part No: 618-B
|
|
|
|
Home -> Plumbing -> Fittings & Valves -> Valves, Deck Fills, Misc.
Direct waste from a holding tank to either an onboard discharge pump or a deck waste fitting for dockside pumpout. The 1 1/2" curved discharge ports can be rotated through 360° so the discharge hoses can be rotated away in parallel, at 90° to each other, in opposite directions or either up or down. USCG approved. Lockable for USCG inspection. Material: Stainless Polypropylene Port sizes: 1. 5", 1" inlet adapter Dimentions: 4. 5/8" H x 7. 1/4" W x 7.
Part No: 45490-1000
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Lower Shift Cable Kits
Worn shift cables can cause shifting difficulties. The result can be damage to your gears. If your boat is hard to shift try our new Extreme Shift Cables for the best in effortless shifting. Kit parts with an E suffix use Extreme Shift Cables or are components of Extreme Shift Cable kits. Shift cable kits include all gaskets, bellows, and ends required for installation. Caution: some older models may have been retrofitted to accept aft installation cables.
Part No: 18-2157
|
|
|
|
Home -> Foul Weather Gear & Jackets -> Foul Weather Gear -> Foul Weather Gear->Mariner Two-Piece Rain Suit
.
Part No: 10510
|
|
|
|
Home -> Engine Systems -> Engine Parts->Marine Rubber Hump Hoses
These rubber hump hoses absorb more engine movement, vibration and misalignment than standard exhaust hose. Install over rigid tubing or pipe using the four included stainless T-bolt clamps (two at each end), downstream from cooling water injection.
Part No: 116-220-5000KIT
|
|
|
|
Home -> Engine Systems -> Engine Parts
FourStroke outboards (non-BigFoot), beginning with Model Year 2005.
Part No: 803750A03
|
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper->Hookit Imperial Sanding Discs
3M's premier Imperial abrasive discs feature the original Hookit™ attachment system. Convenient hook and loop system maximizes disc life by giving the user the ability to change grits without contaminating disc backing or dual action pad face. "Imperial 6" E-weight backing provides faster, more aggressive cut. Hookit™ 8" Regular No-Hole, E-Weight Paper Backing, 25 Disc Qty. Hookit™ Regular No-Hole E-Weight Paper Backing, 25 Disc Qty.
Part No: 01819
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers->Roller & Bracket Assemblies
Pre-assembled for easy installation . Strong, hot-dipped galvanized brackets hold shock-absorbing, V-style tapered rollers to give proper keel support . Black rubber rollers available in 5 widths. Long-lasting TPR rollers available in 3 widths. 17/32" x 5" slots for vertical adjustment.
Part No: 10405G
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Electrical Eng Parts
1967 & Up - Model: 80, 90, 120, 140, 155, 165 ,175, 185, 190, 200, 210, 225, 230, 235, 250, 260 HP & 305, 350, 454 CID.
Part No: 18-5711
|
|
|
|
|
Home -> Foul Weather Gear & Jackets -> Foul Weather Gear -> Foul Weather Gear->Mariner Two-Piece Rain Suit
.
Part No: 10510
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Water Tanks
Ideal for tight spaces where larger tanks won't fit, this tank is designed to maintain waterline pressure and reduce unwanted pump cycling—which helps to keep the pump cool and extend its life. Incorporates a butyl rubber diaphragm in a nylon housing to maintain pressure for years. Material: Nylon . Capacity: 24fl. oz. . Pressure: 125psi . Port Sizes: 1/2" NPS male . Dimensions: 4. 8"H x 3. 8"W x 9.
Part No: 182-200
|
|
|
|
Home -> Fishing -> Fishing Accessories->Gunnel Mount Striker Bases
Attractive strike bases lock into 12 positions with hex nut design. Manufactured using marine grade cast 316 stainless steel. Arms are ambidextrous and will fit both port and starboard bases. Removable to keep your deck unobstructed . Compatible with Lee, Perko and Rupp outriggers . The Complete Gunnel Mount Tele-Outrigger systems include a 1/8" Striker Base, 15' outrigger, and outrigger kit. Mfr.
Part No: BP-212-F-1
|
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper->Hookit Imperial Sanding Discs
3M's premier Imperial abrasive discs feature the original Hookit™ attachment system. Convenient hook and loop system maximizes disc life by giving the user the ability to change grits without contaminating disc backing or dual action pad face. "Imperial 6" E-weight backing provides faster, more aggressive cut. Hookit™ 8" Regular No-Hole, E-Weight Paper Backing, 25 Disc Qty. Hookit™ Regular No-Hole E-Weight Paper Backing, 25 Disc Qty.
Part No: 01818
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Freshwater Pumps
Whale Tiptoe Pump Installs in a galley floor. Fits flush in the closed position. A twist of the plunger releases the lock and it springs up to operating position. Suitable for freshwater or saltwater 1. 5 GPM Ports: 1/2" Dimensions: 6 5/16"H x 3"dia.
Part No: GP1309
|
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Exhaust Valve|**Exhaust Valve.
Part No: 18-4470
|
|
|
|
Home -> Plumbing -> Marine Sanitation->Service Kit for Electric Toilet
Replacement and Service Parts We stock an extensive selection of parts and service kits for virtually all plumbing products. In addition, we can quickly get any part you need to repair your Jabsco, SHURflo, Raritan or Groco equipment directly from the manufacturer through our Special Order department. If you know the part number you need simply order the part using the Model or manufacturer's part number. If you don't know either number, please call us for assistance.
Part No: 96080-0080
|
|
|
|
Home -> Paint & Maintenance -> Zinc Anodes -> Outboard/Outdrive Anodes->Alpha I, Bravo I, Bravo II/III Outdrive & Verado Outboard Aluminum & Magnesium Anode Kits
Offered in aluminum, for use in salt or brackish water, or magnesium, for freshwater only.
Part No: CMBRAVO23KITA
|
|
|
|
Home -> Engine Systems -> Engine Parts->Vernatube Exhaust Elbows
Designed to work well with Marine Muffler components, these elbows provide superb exhaust gas flow and smooth clamping surfaces. Made of the same high quality material as Vernatube exhaust tubing.
Part No: 1200189
|
|
|
|
Home -> Plumbing -> Freshwater Systems
Complete with spray nozzle, polished-chrome deck holder and 6' heavy-duty white hose. ON/OFF trigger allows for intermittent water flow or continuous spray.
Part No: 135-0011-WH
|
|
|
|
Home -> Seating & Covers -> Covers & Biminis->Boat Umbrellas
This simple rail-mount umbrella is great for entertaining or fishing. The canopy has a special baffle to prevent wind from inverting it. It's nearly 6' across the top bow. Fabric is durable acrylic-coated nylon. A 5' fiberglass shaft, polymer bow ribs and non-corroding hardware ensure longevity. Mount fits 1'' or 7/8'' horizontal or vertical rails.
Part No: B10-401
|
|
|
|
Home -> Watersports -> PWC Parts & Accessories
Includes 2' of discharge hose, a thru-hull fitting, hole saw, hose clamps, a fuse and fuseholder, and a small tube of sealant.
Part No: PWC-1
|
|
|
|
|
Home -> Engine Systems -> Engine Instruments -> Engine Instr. Components->Instrument Sending Units
For use with all Teleflex instruments which require them, including Red International, Blue Vector, White Sportsman, and Heavy Duty series instruments. Order dual senders for two-gauge installations (e. g.
Part No: IA96042
|
|
|
|
Home -> Engine Systems -> Control Systems->KE-4 Electronic Remote Control System
This longlasting control has been extensively tested, and performs well in excess of a typical mechanical system. Features fail-safe operation, self-diagnosis system, control head with built-in station select switch, neutral warm up provision, optional mechanical backup, overload protection. Use one control unit and one actuator for single engine boats with up to four pilot stations. Use two control units for two engine boats with up to four stations. Call 1-800-BOATING for more information.
Part No: NM0616-04
|
|
|
|
Home -> Sailboat -> Sailboat Canvas->Telescoping Awning Poles
These poles provide support for your awning, then store compactly. Anodized aluminum poles feature: Internal twist-lock mechanism. “Eye” type end fittings. 1" and 7/8" dia.
Part No: 504000
|
|
|
