Welcome! Please Sign-In
Top Sellers
Crown Head Pump Assembly, Post-January 1988, #CH102MW from RARITAN
Crown Head Pump Assembly, Post-January 1988, #CH102MW from RARITAN
Raritan CH102MW Crown Head Complete Inlet Pump Ass'y Post 1988.
Telescopic Tiller Extension 29" - 48" from RONSTAN
Telescopic Tiller Extension 29" - 48" from RONSTAN
Ronstan tiller extensions feature fluted anodized aluminum tubing for durability and rigidity and a tapered, non-slip Hyperlon grip with ball end. The Urethane universal joint can be removed without tools. Adjustable-length versions feature a fast-action adjustable shaft for additional versatility. 4732913 Aluminum Fixed 24” RF3128 5/8"Tubing Dia. , 1"Grip Dia. , 24"L, 5. 3Lbs. 1133131 Lightweight Aluminum 33” RF3129 5/8"Tubing Dia. , 1"Grip Dia.
Furler Kit for Boat Length to 16', 500lb. SWL, 1/8" Max. Wire dia., 1/4" Pin dia., 2-1/2" Pin-to-Pin, 5/32" Furling Line dia. from HARKEN
Furler Kit for Boat Length to 16', 500lb. SWL, 1/8" Max. Wire dia., 1/4" Pin dia., 2-1/2" Pin-to-Pin, 5/32" Furling Line dia. from HARKEN
Furl or set your jib from your cockpit Harken small boat furlers allow the sail to be set and furled from the cockpit, a critical convenience in many racing dinghies and trailerable sailboats. Constructed of Hardkote anodized Teflon-impregnated aluminum, they feature multiple stacked races of Delrin or Torlon ball bearings for smooth rotation under load. The jib’s luff wire must be properly seized to the sail, since it carries most of the headstay load. 434 furler for dinghies under 16ft. (4.
Series 60 Orbit Block, Single Light-Load, 2-3/8" Sheave Size, 1,710lb. SWL, 4.7oz. from RONSTAN
Series 60 Orbit Block, Single Light-Load, 2-3/8" Sheave Size, 1,710lb. SWL, 4.7oz. from RONSTAN
These exceptionally strong blocks feature the performance Orbit sheave with captive Acetal ball bearings for side thrust loads, eliminating the need for side retainer plates. The 75mm webbing block (RF79107) can be used where swivel head and shackle attachment is not required to achieve further weight savings. Sheave Size: 2-3/8" (60mm) or 3" (75mm). Line Diameter: Series 60: 1/2" (12mm), Series 75: 9/16" (14mm). Cheek Material/Finish: Anodized aluminum.
PVC with Polyurethane Mesh Rope Bag, 11-13/16"W x 16-11/16"H x 8-11/16"L from RONSTAN
PVC with Polyurethane Mesh Rope Bag, 11-13/16"W x 16-11/16"H x 8-11/16"L from RONSTAN
Ronstan rope bags can be removed and stored inside the boat when not in use; all that remains in sight is the soft white plush side of the loop attachment panel—and no sharp hooks! RF3700 Series Acrylic Canvas Bags Acrylic rope bags have a classic navy style. They are lightweight, water resistant and will retain shape. Made of white, water-repellent PVC with black water-draining polyurethane mesh, these rope bags are extremely durable. Technical features include carbon tubes for easy opening.
Acrylic Canvas Drink Holder, 5-1/8"W x 5-1/8"H x 3-9/16"L from RONSTAN
Acrylic Canvas Drink Holder, 5-1/8"W x 5-1/8"H x 3-9/16"L from RONSTAN
Ronstan rope bags can be removed and stored inside the boat when not in use; all that remains in sight is the soft white plush side of the loop attachment panel—and no sharp hooks! RF3700 Series Acrylic Canvas Bags Acrylic rope bags have a classic navy style. They are lightweight, water resistant and will retain shape. Made of white, water-repellent PVC with black water-draining polyurethane mesh, these rope bags are extremely durable. Technical features include carbon tubes for easy opening.
RigTune Pro Digital Rig Tension Gauge from HARKEN
RigTune Pro Digital Rig Tension Gauge from HARKEN
Old-fashioned spring gauges, like the Loos Pro, don’t provide repeatable numbers. This product does. Unlike spring-loaded gauges, the Harken Rigtune Pro measures rig tension to the nearest kilogram. A load cell records the pressure on one of the pins and the measurement is displayed on a simple, easy-to-read screen. The Rigtune Pro fits a specific range of rigging sizes, 2. As rigging is deflected over three pins on the back of the gauge, a load cell records the pressure on one of the pins.
Ratchet Orbit Block, Cheek, Counter-Clockwise, 550lb. SWL, 2.7oz. from RONSTAN
Ratchet Orbit Block, Cheek, Counter-Clockwise, 550lb. SWL, 2.7oz. from RONSTAN
Practical Sailor's Ratchet Block Click-Off rated Ronstan's Orbit block "Overall, the most impressive with its grip, versatility, and lightweight design. It can be set at a 0 or 90 degree orientation, provides stress-free articulation without allowing the block to over-rotate, and is locked in place with a security clip that doesn’t require tools to fit. The Dyneema link is also more compatible with carbon, Dyneema and webbing connection points than steel loop tops or shackles.
Flat Cam Riser, 1"H from HARKEN
Flat Cam Riser, 1"H from HARKEN
Harken Cam-Matic cleats are legendary for smooth operation when holding and releasing control lines. Three rows of Delrin ball bearings allow the jaws to open and close smoothly under the highest loads. Light springs allow the cleats to open freely, so the teeth do not have to be sharp which means that your line lasts longer. Use models with aluminum jaws for high loads, or when the line will be drawn through the teeth for adjustment.
Arrow Style Windvane from RONSTAN
Arrow Style Windvane from RONSTAN
Small boat wind indicators feature quality construction at a fraction of the price of other windvanes, so they are a great choice for junior sailors who might be rough on the equipment. Ronstan's new vanes are balanced for accuracy and molded in UV-stabilized nylon. The aluminum shaft can be removed from the mast bracket for trailering or security. Both the Pennant and Arrow style indicators include adjustable tacking angle arrows.
Exit Box Style, 7/8" Sheave Dia., 1/8" Max. Line, 350lb. SWL, 1.1oz. from RONSTAN
Furling Lead Block from RONSTAN
Furling Lead Block from RONSTAN
A sleek, snag-free way to lead your furler's lines back to the cockpit. Clamps around the 7/8" or 1" stanchion tubing, so you don't have to drill any holes.
Fluorescent Sailing Knife from WICHARD
Fluorescent Sailing Knife from WICHARD
Find this knife in the dark! Half-serrated stainless steel blade cuts heavy materials and composite ropes without dulling. Glow-in-the-dark handle makes it easy to locate. Features a 2-7/8"L locking blade, shackle key, and marlin spike. 7-1/8"L open.
PHII Pump Assembly, Complete, #PHIIPUMP from RARITAN
C.P. Marine Toilet Bowl and Drain Cleaner from RARITAN
C.P. Marine Toilet Bowl and Drain Cleaner from RARITAN
Raritan C. P. cleans potties! This is the only bowl cleaner that can be combined with K. O. It eliminates the worst raw odors from the intake line. Cleans without brushing. Bio-enzymatic.

from HARKEN, from RONSTAN, 8"L from WICHARD, Gallon from RARITAN

Series 30 Block, Triple/2-Axis Shackle Head/Cam Cleat, 1,100 SWL, 6.2oz. from RONSTAN Home -> Sailboat -> Blocks -> Blocks->Series 30 Ball-Bearing Mini Blocks
.
Part No: RF30322
Series 30 Orbit Block, Triple/Cam, 1213lb. SWL, 4.4oz. from RONSTAN Home -> Sailboat -> Blocks->Series 30 Orbit Blocks™
Their flexible lashing and Dyneema® Link technology mirrors the latest trends in development classes and grand prix ocean racing. The product of meticulous engineering, they deliver the ultimate in strength, weight savings and control. Months of on-water testing by elite sailors pushed the product to their limits. Halyard, vang and backstay applications on boats to 16ft . Control line applications on larger boats . Materials: Sheave: High-compression–strength carbon black Acetal .
Part No: RF35322
System A Slider Round Track End Kit from HARKEN Home -> Sailboat -> Traveler, Tracks & Vang->Battcar Batten Traveler Systems, System A Components
Add a lazy jack system, and raising or lowering your mainsail becomes a single person operation. Battcar systems also improve sailing performance, because they do not require the sail to be cut flat, or reduce the size of the roach, as with other systems. They make mainsail handling safer, by allowing you to raise or lower the sail with practically no effort at all, even with the sail powered up. At the inboard end of every batten, special ball bearing or slider Battcars move along the track.
Part No: 3824
System A Slider Wide Flat Track End Kit from HARKEN Home -> Sailboat -> Traveler, Tracks & Vang->Battcar Batten Traveler Systems, System A Components
Add a lazy jack system, and raising or lowering your mainsail becomes a single person operation. Battcar systems also improve sailing performance, because they do not require the sail to be cut flat, or reduce the size of the roach, as with other systems. They make mainsail handling safer, by allowing you to raise or lower the sail with practically no effort at all, even with the sail powered up. At the inboard end of every batten, special ball bearing or slider Battcars move along the track.
Part No: 3826
System A Slider Flat Track End Kit from HARKEN Home -> Sailboat -> Traveler, Tracks & Vang->Battcar Batten Traveler Systems, System A Components
Add a lazy jack system, and raising or lowering your mainsail becomes a single person operation. Battcar systems also improve sailing performance, because they do not require the sail to be cut flat, or reduce the size of the roach, as with other systems. They make mainsail handling safer, by allowing you to raise or lower the sail with practically no effort at all, even with the sail powered up. At the inboard end of every batten, special ball bearing or slider Battcars move along the track.
Part No: 3825
Big Bullet Block, Single with 423 Cam & Becket, 150lb. SWL, 5.0oz. from HARKEN Home -> Sailboat -> Blocks->Big Bullet Blocks
Can be used as main or jib sheet blocks on dinghies, or for control line applications, such as travelers, cunninghams or boom vangs on offshore boats. Where applicable, blocks use #10 fasteners. Sheave: Delrin. Sheave Size: 1-1/2" (38mm). Ball Bearings: Delrin. Line Diameter: 3/8" . Cheek Material/Finish: Plastic/stainless straps.
Part No: 362
Big B Fender, 10" x 26" (Large), Yellow from TAYLOR Home -> Anchor & Docking -> Fenders & Docking->Big B™ Fenders
Center Rope Tube for versatility The versatile Big B™ Fender incorporates an integral 3/4"dia. It can be hung vertically or horizontally with a single line. Horizontal hanging is useful protection against pilings, awkward docking situations, and tidal change areas. Big B fenders feature seamless construction, with molded ribs to minimize roll. Features a football needle valve for precise air pressure regulation. Available in four diameters to fit a full range of boat sizes.
Part No: 581032
Machscr-BZ Fhp 10X1 from FASCO FASTENERS Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->Silicon Bronze Machine Screws - Phillips Flat Head - Bulk Packs
Silicon Bronze - the generic term used for various types of copper-silicon alloys. The properties of the alloy; a high percentage of copper, and small amounts of silicon, manganese or aluminum added for strength.
Part No: 4934
Machscr-Rhs BZ 10X1 from FASCO FASTENERS Home -> Fasteners -> Mechanical Fasteners->Silicon Bronze Machine Screws - Slotted Round Head - Bulk Packs
Silicon Bronze - the generic term used for various types of copper-silicon alloys. The properties of the alloy; a high percentage of copper, and small amounts of silicon, manganese or aluminum added for strength.
Part No: 1735
Utility Flotation Vest, Medium from STEARNS Home -> Safety -> Life Jackets->Comfort Series Utility Flotation Vest
The Comfort Series utility vest is specially designed with soft, lightweight mesh on the upper half of the vest for comfort and ventilation. Tough, nylon oxford outershell . Two encircling body straps with zipper front . Two pockets with hook and loop closure . Lightweight, durable Crosstech flotation foam . D-rings for attaching gear . 3M Scotchlite Reflective Material SOLAS-grade 6755 on panels . Minimum 15. 5lb. buoyancy .
Part No: I424ORG-03-000
"Deck Hand II" Heavy-Duty Flotation Vest, XXX-Large from STEARNS Home -> Safety -> Life Jackets -> Commercial Life Jackets->"Deck Hand II" Heavy-Duty Flotation Vest
Heavy-duty flotation vest features 10 flotation panels for a flexible, contoured fit. Has rustproof Vislon® zipper and heavy-duty encircling body belt. Chest pocket with Velcro® closure . Side adjustments . Tough nylon outershell with marine mesh inner lining . Sized for a comfortable fit . 62 sq. in. 3M Scotchlite Reflective Material SOLAS-grade 6755 on panels . Minimum 15-1/2 lb. buoyancy .
Part No: I416ORG-07-000
Shower Handset MK2 from WHALE PUMPS Home -> Plumbing -> General Purpose Pumps->Repair and Service Kits, Spare Parts
Parts service and repair kits for Whale Water Systems Units.
Part No: AS5133
Black Housing, Starboard Side Mount from AQUA-SIGNAL Home -> Electrical -> Exterior & Navigation Lighting->Series 41 Navigation Lights
Case Material: Glass-reinforced polycarbonate Mounting Hardware: Two #6 RH screws (sold separately) Volts: 12V Draw: 2A Wiring Provisions: 5" Wire pigtail Replacement Bulb: Model 2412278 Warranty: One year.
Part No: 41200-7
Green Corps Roloc Disc - 2", 50-Grit, 25 Pk from 3M PRODUCTS Home -> Paint & Maintenance -> Sandpaper -> Sandpaper Discs->Roloc Discs
Allow fast disc changes. Available in 2" and 3" with 3M Roloc™ attachment system to fit any standard 1/4" drill. Use with Roloc™ Disc Assembly. Abrasive Material: Aluminum oxide . Recommended Usage: Disc grinding with any standard 1/4" drill or air tool . Backing Type: Roloc™ attachment . Disc Size: 2" disc .
Part No: 01396
Imperial L/S Sheets (PB) (AO) - P120E-Grit, 50 Pk from 3M PRODUCTS Home -> Paint & Maintenance -> Sandpaper -> Abrasive Long And Skinny->Imperial L/S Sheets (PB) (AO) - P120E-Grit, 50 Pk
Aluminum oxide and tough Cubitron mineral blend for exceptionally fast cut. Tough E-weight paper backing assists cut and is durable for longer life. Purple color indicates top quality and best cost/value. 80-grit. Package of 50. Aluminum oxide, Cubitron mineral blend abrasive. Imperial E-Weight paper backing assists cut.
Part No: 00389
Lifeline Cushions, 57" White from WEST MARINE Home -> Cordage -> Rigging Products -> Rigging Wire->Premium Lifeline Cushions
These comfortable cushions have an integral PVC tube that keeps them from being cut by the lifelines. Solution-dyed acrylic cover provides UV protection and prevents rapid deterioration. These good-looking cushions will keep your crew cozy on the rail!. 1 1/2"OD, 1/2"ID, 57"L.
Part No: 9062
Lifeline Cushions, 57" Blue from WEST MARINE Home -> Cordage -> Rigging Products -> Rigging Wire->Premium Lifeline Cushions
These comfortable cushions have an integral PVC tube that keeps them from being cut by the lifelines. Solution-dyed acrylic cover provides UV protection and prevents rapid deterioration. These good-looking cushions will keep your crew cozy on the rail!. 1 1/2"OD, 1/2"ID, 57"L.
Part No: 9061
Gasket from SIERRA Home -> Engine Systems -> Engine Parts
**Rocker Cover Gasket|**Rocker Cover Gasket.
Part No: 18-25002
Service Kit 09-45592 from JOHNSON PUMPS Home -> Engine Systems -> Engine Parts -> Cooling Systems
Service Kit 09-45592.
Part No: 09-45592
K.O. Kills Odor!, Gallon from RARITAN Home -> Plumbing -> Marine Sanitation -> Head Chemicals & Tissue->K.O. Kills Odor! Bio-Active Treatment
Using live aerobic bacteria, K. O. breaks down solids and paper and controls holding tank odors. Just 4oz. per 25-gallon tank capacity (after each pumpout) keeps system odor-free. Safe for all marine sanitation systems. Nontoxic. Note: Cannot be combined with any other holding tank product or chemical bowl cleaner except C. P. Bowl & Drain Cleaner, Model 1527167.
Part No: 1PKOGAL
Lifeline Cushions, 57" Black from WEST MARINE Home -> Cordage -> Rigging Products -> Rigging Wire->Premium Lifeline Cushions
These comfortable cushions have an integral PVC tube that keeps them from being cut by the lifelines. Solution-dyed acrylic cover provides UV protection and prevents rapid deterioration. These good-looking cushions will keep your crew cozy on the rail!. 1 1/2"OD, 1/2"ID, 57"L.
Part No: 9063
Abrasives from 3M PRODUCTS Home -> Paint & Maintenance -> Sandpaper->Hookit Gold 255L Sanding Discs - 3", 5", & 6"
Hookit™ Gold 255L Film Discs, Dust Free 6", 5", and 3" discs Convenient hook and loop attachment system for easy attachment to and removal from the dual action face pad. Tough film backed discs with aluminum oxide offer long life and consistent finish.
Part No: 957
Twist’n’Lock Service Kit from JABSCO Home -> Plumbing -> Marine Sanitation->Twist’n’Lock Compact Manual Head Service Kits & Parts
Twist’n’Lock Compact Manual Head Service Kits & Parts Technical Data Sheet.
Part No: 29045-3000
11.1" to 13.5" Diameter Aluminum Propeller Repair from HENRY SMITH Home -> Engine Systems -> Propellers & Drive Trains -> Aluminum Props->Henry H. Smith Propeller Repair
Smith & Company, the oldest and largest propeller repair facility in the Midwest, to offer repair and reconditioning of aluminum and stainless props. A family-owned business that began in 1900, Henry Smith, of Algonac, Michigan, specializes in providing solutions for all your boating propulsion problems. Operated by four generations of the same family, they can repair any prop from 6" to 60" in diameter, and they fix about 150 propellers of all shapes and sizes every day.
Part No: 111A11WM
Removable Fresnel All-Round Light, 20-1/2"H from PERKO Home -> Electrical -> Exterior & Navigation Lighting -> Navigation Lights->Fresnel All-Round Lights with Base
Clear fresnel lens with 2nm visibility. For use on power vessels under 20m or 65. 6'. Base: 3-1/4" x 1-5/8". 16º rake. Bulb included. Case Material: Black plastic top, chrome over zinc bases . Mounting Hardware: #8 screws (sold separately) . Volts: 12V . Draw: 0. 58A .
Part No: 1330DP2CHR
3" W x 5" D, 3/8" Fastener from SCHAEFER Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyestraps, Fairleads, Bails->Light-Duty Block Hangers
Forged stainless-steel construction.
Part No: 90-07
Snap Hook, 4-5/8"L from WICHARD Home -> Sailboat -> Shackles, Snaps & Fittings->Stainless-Steel Snap Hooks
Stainless steel, asymmetric, with eye.
Part No: 2327
FLAG Resin, 1/2 Gallon from MAS EPOXY Home -> Paint & Maintenance -> Epoxy & Fiberglass->FLAG Epoxy Resin
We highly recommend this resin for general purpose gluing applications where wet-out of fiberglass is not a consideration, and for all your filleting and fairing needs. FLAG Resin is a "medium" body resin specifically designed to perform as an adhesive and structural laminating foundation. FLAG is more reactive than our Low Viscosity Resin when mixed with Medium Hardener. FLAG Resin may be used with all MAS Hardeners, however, for filled applications we recommend our Medium Hardener.
Part No: FLAG064
1/2in. Fine Capnut from FASCO FASTENERS Home -> Fasteners -> Mechanical Fasteners->Cap Nuts
Type 18-8 stainless steel.
Part No: 5618C
Double-Action Safety Hook from WICHARD Home -> Sailboat -> Shackles, Snaps & Fittings
This patented safety hook has a twin trigger torsion gate that absolutely will not open unless the lever/grip and hook are squeezed simultaneously. The twin trigger is required by the European EN 362 rule for fall protection, is CE certified and meets ORC safety standards. Constructed of 304 stainless with a UV-resistant polymer lever/grip. Closed eye accommodates 1" webbing or 3/8" line. 4. 6"L. Gate opening: 3/4". MWL: 3,300lb.
Part No: 2454
   Company History
   Mission Statement
   Press Room
   Careers at West Marine
   Affiliate Program
   Annual Catalog
   Store Locator
   And More...
   Stock Price
   Press Releases
   SEC Filings
   Email Alerts
   Analyst Coverage
   Management Team
   Financial FAQ
   And More...
   Terms Of Use
   Returns/Exchanges
   Privacy Policy
   Contact Us
   Site Map
   Annual Catalog
   Product Recalls
   And More...
Product offering and prices listed on this website (www.westmarine.com) are limited to Internet and phone orders (1-800-BOATING). Prices on periodic web-only specials apply only to Internet orders. Product offering and/or prices may vary at West Marine retail stores. ©2009 West Marine | All Rights Reservedpics11