Top Sellers
Back-to-Back Lounge Chair Seat Cover, 22"H x 50"W x 22"D from TAYLOR
Breathable rip/stop polyester fabric plus air vents provide optimum protection and ventilation for your seats, especially in hot and humid climates. Polyurethane coating on the inside prevents color transfer or bleed-through . Comes with drawstring hem . Available for most popular seat styles .
|
Handheld Orange Smoke Flare, Single Pack from ORION
Produces orange smoke that’s visible for up to five miles during the day. USCG approved for daytime use only. Signal Type: Orange smoke hand flare . Burn Time: One minute . Deployment Method: Match strike igniter . Type Approval: USCG daytime .
|
Impeller, 18-3062 from SIERRA
Recommended replacement schedule is every 3 years for fresh water and every year for salt water Click to view a Sierra Impeller Application Chart (PDF) For further assistance, have your year & model information handy and call our Product Advisors at 1-800-BOATING.
|
Braided Polyester Cord, by the Foot from NEW ENGLAND ROPES
A low-stretch cord that’s great for flag halyards, foredeck netting, or light-air spinnaker sheets. Sold by the foot. Diameter: 1/8". Best use: Utility cord, flag halyards . Construction: Braided polyester . Breaking strength: 530lb. . Stretch: 3% at 15% of breaking strength .
|
50' Braided Polyester Cord from NEW ENGLAND ROPES
A low-stretch cord that’s great for flag halyards, foredeck netting, or light-air spinnaker sheets. Length: 50'. Diameter: 1/8". Best use: Utility cord, flag halyards . Construction: Braided polyester . Breaking strength: 530lb. . Stretch: 3% at 15% of breaking strength .
|
CARB GASKET KIT from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Yamaha Carb Kit from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Replaces OMC P/N 378444 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
For Chrysler/Force, 89-817109A2 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
Gunnel Guard - 1/2" Round, 1-1/2" Diameter, 20' Length from TAYLOR
These polyester-covered guards will protect your boat from dings and scratches and they won’t rot in the sun or saltwater like cotton guards. Great for use on dinghies and swim platforms, too. Fabric tabs attach easily with screws or nails. Half Round is for flat surfaces; 3/4 Round is for 90° edges. Sold in 10' or 20' lengths or by the foot up to 50'. Material: Polyester fabric/closed-cell foam . Attachment Method: Screws or nails . Shock Absorption Mechanism: Foam padding .
|
LetterU - White, 3" from HARDLINE PRODUCTS SR
Popular vinyl letters to meet USCG requirementsSelf-adhesive, 3"H vinyl, block, letters and numbers. Meet Coast Guard requirements when applied on contrasting background with proper spacing. Black or white. Sold individually or by the kit. Four of each letter and number for a total of 144 pieces in the kit. Meet USCG requirements when affixed to a contrasting background and properly spaced. Self-adhesive vinyl.
|
Number 3 - Black, 3" from HARDLINE PRODUCTS SR
Popular vinyl letters to meet USCG requirementsSelf-adhesive, 3"H vinyl, block, letters and numbers. Meet Coast Guard requirements when applied on contrasting background with proper spacing. Black or white. Sold individually or by the kit. Four of each letter and number for a total of 144 pieces in the kit. Meet USCG requirements when affixed to a contrasting background and properly spaced. Self-adhesive vinyl.
|
1/4" Sta-Set X Polyester Double Braid, 2,700lb. Breaking Strength from NEW ENGLAND ROPES
Patented all-polyester braid with parallel core construction and a filament/spun cover for improved handling and greater abrasion resistance. One third less stretch than Sta-Set at only a small price premium. In many applications, Sta-Set X can be used in lieu of expensive racing braids, especially when sized conservatively. Identified by two fine red tracers in the cover forming the characteristic “X”. Best Use: Cruising boat halyards, spinnaker sheets, guys . Stretch: 1.
|
|
|
Adjustable Packing Nut Wrench from SEAFIT
Better than a pipe wrench If you are not equipped with wrenches that fit the nuts on your stuffing box, we suggest you purchase TWO of these. Why? Because you will need two to make an adjustment: One for the locking nut and one for the adjusting nut. These wrenches tend to be easier to use than pipe wrenches—especially in tight engine spaces where many boaters must work. Primary Usage: Adjust/remove inboard shaft packing nut . Size: 1" to 3" adjustable .
|
|
Sealkit from SIERRA, 3 Pack from ORION, Stop Polyester from TAYLOR
|
|
Home -> Engine Systems -> Propellers & Drive Trains -> Drive Train Parts->Propeller Locks
Protect yourself against expensive propeller theft. Machined from naval brass and hardened stainless steel, this lock features a free-spinning collar that will turn if attacked by gripping tools, without loosening the lock. Replaces the original propeller nut and washer . Mercruiser: Alpha I, Bravo I, TRS . OMC: Cobra and Ding Cobra . Outboards Mercury/Mariner: 70 hp and larger .
Part No: 74039
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting->Series 41 Navigation Lights
Case Material: Glass-reinforced polycarbonate Mounting Hardware: Two #6 RH screws (sold separately) Volts: 12V Draw: 2A Wiring Provisions: 5" Wire pigtail Replacement Bulb: Model 2412278 Warranty: One year.
Part No: 41300-7
|
|
|
|
Home -> Sailboat -> Downwind Poles & Cars -> Spinnaker Poles & Gear->Spinnaker Pole Slides
All slides are made of stainless steel with spring pin stops.
Part No: RC73243
|
|
|
|
With amplification and volume controlMLS-310 Series speakers fit a variety of tight spots onboard. They can be bracket or flush-mounted and include necessary hardware. Each includes a built-in 10W amplifier with volume control and on/off switch, making them ideal for situations where added volume and signal clarity is necessary, such as pilothouses where engine noise is loud.
Part No: MLS-310B
|
|
|
|
Home -> Electrical -> Electrical Wire->Primary Wire by the Spool
Ordinary automotive-type wire can suffer a loss of conductivity after a few months in the marine environment, caused by corrosion and/or vibration. Premium Ancor wire will provide a lasting solution for your sophisticated marine electronics and instruments to operate at peak potential. 600V . 105°C dry, 75°C wet . Rated for oily and wet environments . Type 3 stranded, with 5–10 times more copper strands than Type 2 . Marine UL-listed, and meets the highest ABYC standards for AC or DC use .
Part No: 104110
|
|
|
|
Home -> Safety -> Vapor Detectors -> CO Detectors
Reacts to hazardous CO levels and eliminates nuisance alarms caused by nonhazardous CO levels. Features time-weighted averaging sensor software, a unique two-level alarm that informs you of a long-term build up of CO and a peak alarm level memory which stores the CO level at the time of the alarm—valuable information after the boat has been ventilated. 12V DC, and it draws only 60mA. Types of Vapor Monitored: Carbon monoxide . Display Size: 3"H x 5. Controls: Test and mute buttons .
Part No: 60-541
|
|
|
|
Home -> Sailboat -> Rigging Products -> Rigging Terminals->Swage Studs
.
Part No: 32-627
|
|
|
|
Home -> Engine Systems -> Engine Parts->MagForce™ Premium Marine Spark Plug Wire Leads
Manufactured for your specific application, MagForce™ wire leads include a kevlar magnetic suppression core, with superior RFI elimination to protect the most sensitive modern electronics from stray noise and static. Durable stainless steel wound conductors create the hottest spark for maximum horsepower and engine performance. Spark plug and distributor terminals are also stainless steel for corrosion resistance and maximum conductivity.
Part No: 18-8834-1
|
|
|
|
Home -> Engine Systems -> Fuel Tanks->Fuel Pump Kits
Made to meet or exceed OEM standards. Heavy-duty components to assure long life.
Part No: 18-7352
|
|
|
|
.
Part No: 46185
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Bow, Keypin, “D,” Long “D” & Twisted “D” Shackles
Legendary for their quality, beautiful polish and smooth contours. Drop-forged stainless steel ensures that shape remains intact at loads that meet or exceed the deformation point.
Part No: 1246
|
|
|
|
|
Highly visible decals are warranted for five years against fading. 13"W x 24"H. Sold in pairs. ShWt 0.
Part No: 46187
|
|
|
|
Home -> Engine Systems -> Control Systems -> Control Cables->33C Supreme Red-Jacket Cables
.
Part No: 301947-03-192.0
|
|
|
|
|
Home -> Electrical -> Electrical Wire->Primary Wire by the Spool
Ordinary automotive-type wire can suffer a loss of conductivity after a few months in the marine environment, caused by corrosion and/or vibration. Premium Ancor wire will provide a lasting solution for your sophisticated marine electronics and instruments to operate at peak potential. 600V . 105°C dry, 75°C wet . Rated for oily and wet environments . Type 3 stranded, with 5–10 times more copper strands than Type 2 . Marine UL-listed, and meets the highest ABYC standards for AC or DC use .
Part No: 104510
|
|
|
|
Small Center Console 42”H x 36”W x 24”D Medium Center Console 44”H x 40”W x 30”D Large Center Console 45”H x 46”W x 40”D UV Protection, Polyurethane Coating Air vents for ventilation Secure Draw String Hem.
Part No: 80400
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Dock Bumpers->C-Shape Gard®
This versatile extrusion can be mounted both vertically and horizontally to nearly all dimensional lumber sizes. It has been designed to function either as a side guard profile or as an edge guard for light- to medium-duty applications. Lenth Options are one 8' Straight or two 8' Retail Pack or one 25' Coil. 3 5/8" H x 1 1/2". Material: White vinyl with foam core. Shock Absorption Mechanism: Flexible padding. Attachment Method: Screws or nails (not included).
Part No: 46053
|
|
|
|
Home -> Trailer & Parts -> Hitches, Winches & Jacks -> Hitches, Balls, Receivers->Interchangeable Hitch Ball Systems
No more knuckle-busting wrenches or off-line multiple ball setups. Simply slide ball onto shaft and position locking cap. Chrome-plated shank with chromed steel balls exceed SAE-J684-E standards for ball hitches. 3/4" shank is rated to 5,000 lbs. (GTW), comes with 1 7/8" and 2" balls . 1" shank is rated to 8,000 lbs. (GTW) 2 ball set comes with 1 7/8" and 2" balls . 3 ball set comes with 1 7/8", 2" and 2 5/16" balls.
Part No: 74309
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->Episize™ Glass Tape
Episize™ Glass Tape Versatile WEST SYSTEM EpisizeTM 9-oz. woven fabric tapes are ideal for reinforcing chines, hull/deck corners and similar structural applications. When bonded with WEST SYSTEM epoxy, they provide additional tensile strength to resist hairline crack development and abrasion. #729 2" wide x 10' or 50 yard rolls. #731 3" wide x 50 yard roll. #732 4" wide x 10' or 50 yard rolls.
Part No: 731
|
|
|
|
|
Home -> Electrical -> Electrical Wire->Primary Wire by the Spool
Ordinary automotive-type wire can suffer a loss of conductivity after a few months in the marine environment, caused by corrosion and/or vibration. Premium Ancor wire will provide a lasting solution for your sophisticated marine electronics and instruments to operate at peak potential. 600V . 105°C dry, 75°C wet . Rated for oily and wet environments . Type 3 stranded, with 5–10 times more copper strands than Type 2 . Marine UL-listed, and meets the highest ABYC standards for AC or DC use .
Part No: 104410
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Spinnaker Pole Stanchion Mounts
This spinnaker pole stanchion mount makes storage and quick retrieval simple. One end of the pole is slid through the vinyl coated wire loop of the aft holder. The front end of your pole is securely snapped onto the bail of the forward holder. Available in three sizes based on pole diameter.
Part No: 40-558
|
|
|
|
Produces orange smoke that’s visible for up to five miles during the day. USCG approved for daytime use only. Signal Type: Orange smoke hand flare . Burn Time: One minute . Deployment Method: Match strike igniter . Type Approval: USCG daytime .
Part No: 958
|
|
|
|
|
Home -> Engine Systems -> Engine Parts
**SealKit|**SealKit.
Part No: 18-8384
|
|
|
|
Home -> Engine Systems -> Control Systems->KE-4 Electronic Remote Control System
This longlasting control has been extensively tested, and performs well in excess of a typical mechanical system. Features fail-safe operation, self-diagnosis system, control head with built-in station select switch, neutral warm up provision, optional mechanical backup, overload protection. Use one control unit and one actuator for single engine boats with up to four pilot stations. Use two control units for two engine boats with up to four stations. Call 1-800-BOATING for more information.
Part No: NM0619-05
|
|
|
|
|
.
Part No: 46184
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring -> Anchor Hardware->SS Screw Pin Anchor Shackles
To prevent accidental opening, always seize (safety wire) the shackle pin.
Part No: 6619S
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper->Hookit Imperial Sanding Discs
3M's premier Imperial abrasive discs feature the original Hookit™ attachment system. Convenient hook and loop system maximizes disc life by giving the user the ability to change grits without contaminating disc backing or dual action pad face. "Imperial 6" E-weight backing provides faster, more aggressive cut. Hookit™ 8" Regular No-Hole, E-Weight Paper Backing, 25 Disc Qty. Hookit™ Regular No-Hole E-Weight Paper Backing, 25 Disc Qty.
Part No: 01397
|
|
|
|
Now with greater cushioning to absorb impacts even better, this fender protects the delicate aluminum fencing on pontoon boats from dings that occur when rafting with conventional-hull boats. New cam lock-and-strap fastening system makes hanging simple and secure. Semi-rigid UV-treated vinyl. 9"W x 36"L white.
Part No: 32000
|
|
|
|
Home -> Cordage -> Rigging Products->Hi-MOD Compression Toggles
These slim Hi-MOD compression fittings are at least as strong as the rated breaking load of the rigging wire, and they work equally well with right/left hand lay wire. " The shallow angled cone establishes direct mechanical grip on the wire's core and all the outer strands. Constructed from 316 stainless steel, with aluminum/bronze crown rings, they can be taken apart for maintenance and re-used without the need for new parts (provided that no overloading has occurred).
Part No: 38CTT316
|
|
|
|
Home -> Fishing -> Fishing Accessories
Telescoping Octagonal Handle Boat Net Bow: 21" x 25". Handle: 38"–70".
Part No: RF-OCT-37-6-2PC
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains -> Drive Train Parts->Propeller Locks
Protect yourself against expensive propeller theft. Machined from naval brass and hardened stainless steel, this lock features a free-spinning collar that will turn if attacked by gripping tools, without loosening the lock. Replaces the original propeller nut and washer . Mercruiser: Alpha I, Bravo I, TRS . OMC: Cobra and Ding Cobra . Outboards Mercury/Mariner: 70 hp and larger .
Part No: 74052
|
|
|
