Top Sellers
CARB GASKET KIT from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Yamaha Carb Kit from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Replaces OMC P/N 378444 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
Impeller, 18-3062 from SIERRA
Recommended replacement schedule is every 3 years for fresh water and every year for salt water Click to view a Sierra Impeller Application Chart (PDF) For further assistance, have your year & model information handy and call our Product Advisors at 1-800-BOATING.
|
For Chrysler/Force, 89-817109A2 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
10 Micron Replacement Filter Element for OMC 502905 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. Today’s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage.
|
Water Circulating Pump - #18-3581 - Chrysler Inbd # 3004886, 3619542, 3619859, 3745985 from SIERRA
Water Pumps The water pump is the heart of your inboard or I/O cooling system. All Sierra pumps are bidirectional and can be installed on reverse rotation engines. The pumps are also powder coated for additional protection. Includes mounting gasket. Pumps include brass bi-directional impellers, brass plugs and fittings, carbon resin seal, all mounting gaskets, stainless steel seal cup and spring, stainless steel back plate (where required), and powder coating for maximum corrosion protection.
|
Eisenglass & Plastic Restoration Kit from FLITZ
Restore clarity to yellow, hazy or cloudy eisenglass, Plexiglass, plastics, gelcoat and fiberglass the fast and easy way with this kit. Kit includes: 7" diameter. Washable Flitz Buffing Ball for use with any 3/8" drill motor. 1. 76oz. tube Flitz Metal, Fiberglass & Plastic Polish. 1. 7oz.
|
Johnson/Evinrude Outboard Starter, 120 to 140hp V4 (1985-99), 10 tooth drive gear from SIERRA
Sierra's new and remanufactured starters are the only marine starters that meet Marine UL standards. Sierra's remanufactured starters all have new solenoids, drives, bushings, brushes and springs. The bodies are powder coated for greater corrosion resistance. Sierra has entered an agreement with United Technologies to market their complete line of outboard starters and components. All are 100% load tested . Our remanufactured starters are covered by Sierra's customer satisfaction warranty .
|
30GPH Cartridge, Replaces Racor S3240 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
|
60GPH Cartridge, Replaces Racor S3227 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
|
Travel Mug from WEST MARINE
Wide-bottom stainless-steel vacuum travel mug is safe to take anywhere. It has a non-skid bottom which makes it almost spill-proof. This mug has a sip-through top and can be used for hot and cold beverages. Stainless-steel, vacuum driver’s mug is designed specifically to fit securely in most cup holders. This mug holds your favorite hot or cold beverage, has a secure sip-through top and stays cool to the touch. Travel style wide base Drivers style cup-holder size base.
|
Sierra-Tube-Exhaust from SIERRA
Some larger V-8 engines that create a large amount of back pressure use exhaust tubes rather than bellows. This helps to relieve the excessive pressure and eliminate problems with premature bellows failure. In the past, the exhaust bellows would blow up like a balloon and cause the drive shaft bellows to rub against the yoke and U-joints causing holes in the bellows.
|
Auxiliary Outboard Bracket, 9-1/2" Vertical Lift, 7.5hp-30hp HP Rating from GARELICK
Built extra-tough and extra-wide for secondary engines including new higher-torque, four-stroke engines. Stainless torsion springs for easy lifting. Mounting board is 2" weatherproof and maintenance-free polypropylene. Five-position lock bar allows for better range trim adjustment. Maximum Weight: Model #193328: 169 lbs. , Model # 3683455: 175 lbs. . Style: Adjustable . Material: Anodized aluminum body w/ poly-propylene board . Attachment Method: Thru-bolt, backing plate .
|
Gunwale Mount Pontoon Ladder, 4 Step from GARELICK
For use on pontoon boat side gates. Special vinyl sleeves between the first and second step protect the pontoon from damage. The overrail hooks snap into amounting sockets (included) suitable for temporary or permanent mounting. Made of durable 1''dia. aluminum tubing with comfortable white molded plastic steps. Hooks fold flat for compact storage. Four steps. 50''L. Hooks:13.
|
|
33 from, from FLITZ, from GARELICK, Driver from SIERRA
|
|
Home -> Boats & Motors -> Kayaks & Canoes
Adjustable straps with bronze snaps clip into Ocean Kayak and most other sit-on-top kayaks.
Part No: 0710140000
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Dock Hardware->Dock Assembly System
We offer a complete line of rugged dock hardware for building a dock at your summer cabin or waterfront home. Designed primarily for noncommercial users, it’s sturdy enough for boat yards and smaller marinas. Once you have a plan and materials list, we’ll supply the hardware and your local lumber yard can provide the wood. For ideas on constructing your own dock, taek a look at detailed plans at http://www. tiedown. Several sizes of float drums are available, please search under Model 140264.
Part No: 26404
|
|
|
|
Home -> Safety -> Life Jackets -> Recreational Life Jackets->Coastal Comfort Inflatable Life Vests
Enjoy unrestricted movement on the water! Designed for inshore or coastal boating, our new Comfort Series Inflatable Vests have a more streamlined and lightweight fit. These compact vests feature a thin profile that won't inhibit your movement and they offer 22. Each vest has 1" chest webbing, a high-tenacity nylon covering and Delrin buckle. All vests have heat-welded yellow chambers that provide 22. Include D-ring, back-up oral inflation tube, one arming cylinder and pin.
Part No: 1271C/Y-00-WMP
|
|
|
|
Home -> Sailboat -> Sailboat Canvas -> Winch Wheel & Acc. Cove->Winch Covers
Protect winches from weather and salt Heavy-duty winch covers are made from tough, UV-protected ripstop nylon and feature side loops for securing. Reinforced fabric on top keeps marine weather at bay and a top loop makes for quick removal. Covers are sized from 1-13 to fit winches as tall as 15. 6" and diameters to 14.
Part No: BP921
|
|
|
|
Home -> Safety -> Man Overboard Gear->Crew Overboard Pole Accessory - Backstay Mount Sleeve
Blue acrylan flag sleeve for the Backstay mount crew overboard pole (Model 317883).
Part No: H112938
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting -> Navigation Light Acc.->Polar Star 40 LED Replacement Bulbs
2nm navigation light LED replacement bulbs. Specially designed as direct replacements for most of the incandescent navigation lights available including Aqua Signal (series 40, 41, 42, 50, 55), Attwood, Hella, Perko and more. Consumes only 1W. A great way to reduce energy consumption aboard. Satisfy all USCG requirements for brightness, 2nm distance and arc for vessels less than 50m (165') in length. Application: Replacement bulbs for most 2nm navigation lights . Amps: 0. 1A . Watts: 1W .
Part No: 8001450
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports -> Hatch Accessories->Hatch Riser Arms
Replacement arms for Taylor hatches from 1987 to the present. Universal arms can be left or right.
Part No: 1724
|
|
|
|
Home -> Engine Systems -> Control Systems->TFXtreme 3300 CC Performance Cables
3300 CC = 3" travel, 10–32 ends.
Part No: CCX63317
|
|
|
|
Home -> Engine Systems -> Engine Parts->Parts for 500, 900 & 1000 Turbine Series Filters
Parts for 500, 900 and 1000 Turbine Series Filters.
Part No: RK15405
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Tool-OilSeal Driver|**Tool-OilSeal Driver.
Part No: 18-9851
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->Teak Finish Trim Moldings
Assorted Teak Finish Trim Moldings.
Part No: 60703
|
|
|
|
Home -> Foul Weather Gear & Jackets -> Jackets & Fleece -> Jackets & Fleece->Men's Skipper Vest
Made of long wearing FarInfrared® fleece, treated against pilling and static, this versatile vest can be worn as outerwear or as an interior layer. The two-way reversible zipper houses in a recessed “garage,” so it won’t irritate your neck. End pulls for the adjustable waist cord are conveniently located inside the pockets. Bottom hem at back is curved for extra warmth. Oyster Khaki, Carbon Gray, Orca Black. Men's Sizes: S - XXL. 100% polyester.
Part No: OYSTER KHAKI-L
|
|
|
|
Home -> Paint & Maintenance -> Cleaners, Soaps & Polishes->Liquid Metal Polish
Practical-Sailor Quote. "The Flitz cleaner was second only to the Miracle Cloth in cleaning effectiveness, but its too expensive, in our opinion. " Very effective on brass, chrome, aluminum and stainless steel Remove saltwater corrosion, oxidation, tarnish, rust and water stains from stainless-steel, anodized and bare aluminum, chrome, brass and bronze.
Part No: LQ04530
|
|
|
|
Home -> Casual Apparel -> Shorts -> Specialty Pants->Men's Tidal Pants
Changeable, like the weather, our Tidal Pants feature zip-off legs so you can convert them to shorts. Details include mesh lined pockets, comfortable side elastic waist, quarter top front pockets, right leg security pocket, back zip security pockets and blood-, oiland water-resistant UPF-60 fabric that shields against the sun. Wrinkle- and stain-resistant. Colors: Orca Black, Oyster Khaki, Bravo Red, Deck White. Waist sizes 32"-44". 100% quick-drying Ripstop nylon.
Part No: OYSTER KHAKI-40/33
|
|
|
|
Home -> Engine Systems -> Motor Mounts -> Motor Mounts
Measures 9 1/2'' x 10 3/4'' x 2'' and fits both Lift & Lower and Stationary outboard brackets.
Part No: 99057:01
|
|
|
|
Home -> Engine Systems -> Engine Parts->Water Shutters
Exhaust Systems Water Shutters.
Part No: 18-2732-9
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Quick Sanding Surfacer (Professional Application Only)
A two component epoxy primer/surfacer that is quick drying and easily sanded.
Part No: OD9001/1QTUS
|
|
|
|
Home -> Sailboat -> Rigging Products->Hi-MOD Compression Eyes
These slim Hi-MOD compression fittings are at least as strong as the rated breaking load of the rigging wire, and they work equally well with right/left hand lay wire. " The shallow angled cone establishes direct mechanical grip on the wire's core and all the outer strands. Constructed from 316 stainless steel, with aluminum/bronze crown rings, they can be taken apart for maintenance and re-used without the need for new parts (provided that no overloading has occurred).
Part No: 716CTE14
|
|
|
|
Home -> Watersports -> Tow Ropes & Accessories -> Tow Ropes->Ski Tow Rope
Straight Line ropes have long been the standard for the waterski community, in fact, more records have been pulled on a Straight Line rope than all other ropes combined. SL ropes utilize what is called an “S” and “Z” counter twisting method to give the rope better balance and strength. This SL specific construction process creates an equilibrium of both weight and performance. SL ropes are pre-stretched and tolerance checked under AWSA specs before they leave the factory. 1/4” Polypropylene.
Part No: 2099021
|
|
|
|
Home -> Fishing -> Rods->Voltaeus Fishing Rods
Three different composite materials – including carbon for sensitivity and lightweight and T-glass for durability - chemically bonded make up this ultra durable, light in weight fishing rod. Voltaeus, provides the angler’s with today’s version of yesterday’s favorite. Unifiber Construction for the ultimate in Sensitivity and Strength. Medium-Heavy Fast 15-40 5'' 13" VTS- S70M Medium Fast 12-30 5" 13" VTC-70MH 7' 0'' MH Fast 12-20 3'' 9" VTC- C70M 7' Medium Fast 12-30 9.
Part No: VTS-S70MH
|
|
|
|
Home -> Interior, Flags & Gifts -> Knives & Pocket Tools
Loaded with the most requested features, Blast is ready for work. Longer blades mean easier slicing, sawing, filing and more, while Zytel handle inserts provide a comfortable, reliable grip. New designs for the handles and pliers help Blast sustain more than double the squeezing load of the original PST. Needlenose Pliers . Regular Pliers . Wire Cutters . Hard-Wire Cutters . Clip-Point Knife . Wood/Metal File . Saw . Scissors .
Part No: 830033
|
|
|
|
Home -> Cabinet & Deck Hardware -> Rail Fittings & Rub Rail->Teak Handrails
Handrails are beautiful teak. Handrails are 1 1/16W x 2 1/4"H. 1 loop: 13"L. 2 loop: 23"L. 3 loop: 33"L. 4 loop: 43"L. 5 loop: 53"L.
Part No: 60108
|
|
|
|
Home -> Watersports -> Tow Ropes & Accessories -> Watersport Accessories
Day Tripper DLX The Day Tripper features heavy duty nylon protection, lightweight design, padded shoulder strap and handles, fits board with bindings. The Day Tripper DLX has a heavy duty padded bottom, a lightweight design, a padded shoulder strap and comfortably fits one board with bindings. Value packed protection.
Part No: 2085671
|
|
|
|
Home -> Interior, Flags & Gifts -> Knives & Pocket Tools->Skeletool® Multi-Tools
Although skeletal in appearance, that certainly doesnt mean that these multi-tools dont pack plenty of substance. In fact, these 5oz. , sleek-looking models include regular and needlenose pliers, wire cutters, hard-wire cutters, a Phillips screwdriver with 3/16" and 1/4" bits, a bottle opener, and carabiner clip. Skeletool® CX is made of 154CM stainless steel blade with DLC-coated (tungsten) stainless steel handles. Features one-handed opening.
Part No: 830846
|
|
|
|
Home -> Electronics -> Global Positioning Systems -> GPS Accessories->GPSMAP 72/76 Series Accessories
Accessories can add flexibility to your GPS unit.
Part No: 010-00174-03
|
|
|
|
Hard to find accessories and replacement parts for Igloo products White seat cushion for 72 quart model.
Part No: 8496
|
|
|
|
Home -> Paint & Maintenance -> Cleaners, Soaps & Polishes->#50 One-Step Cleaner/Wax
Cleans, polishes, protects and restores lightly oxidized gel coat. Cleans chemically without dulling abrasives.
Part No: M-5001GA
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil
Bristol Finish urethanes are designed to be fast and easy to use. Bristol Finish urethanes are designed with high performance in mind. Exterior products have the highest level of UV resistance that is possible to achieve in a transparent coating. The fast and easy application is only the first savings. With very low maintenance needed, our products pay for themselves year after year. Contains 32 oz (946 mL) Urethane Resin and 4 oz (118 mL) Catalyst. 4 coats (minimum) - 50 sq ft (4,65 sq M).
Part No: CTB-QA
|
|
|
|
Home -> Sailboat -> Headsail Furling -> Furling Accessories
Spare prefeeder for your Tuff Luff Headstay System.
Part No: 1205-01
|
|
|
|
WATERPRESR KIT, OB 30PSI AMEGA.
Part No: 61238P
|
|
|