Top Sellers
|
|
Hose Adapter, From 1-1/8" to 3/4"-5/8" from RULE INDUSTRIES
#69 is stepped & adapts from 1-1/8" to 3/4" - 5/8" #57 is an elbow & adapts from 1-1/8" to 1" NPT #67 adapts from 1-1/2" to 1-1/8".
|
Scotch General Painting Masking Tape #2050 - 2" from 3M PRODUCTS
Use in a wide range of painting applicationsGeneral-purpose. Not for critical or extended outdoor use. Recommended Usage: General purpose masking or binding tape; adheres to previously painted or varnished surfaces . Material: Crepe paper with rubber resin adhesive . Removal Time: Three days .
|
500 RC Windlass, 600lb. Max. Pull, Boat Length 35', 1/4"HT Chain, 1/2" Rope Rode Size, 62'–Chain; 45'–Rope Speed Up/Min., 60' Speed Down/Min., 60A–75A @12V Draw from MAXWELL
These low-profile windlasses feature a patented tension system that maintains resistance required to feed chain/rope rode into the locker instead of jamming it in the windlass. Designed for easy installation, the motor can be oriented in any of 12 positions below decks. Two pieces bolt together quickly. Gasketed, watertight base. For decks to 2 3/4" thick. Capstan models and extra-long shafts for thick decks are available by Special Order. Style: Vertical . Rode Type: Rope/chain .
|
Rim Latch Sets - Reverse Bevel with Flush Strike from PERKO
Chrome-plated zinc. Sliding lock button. Case size: 2 1/8'' x 1 3/4''. Escutcheon Size: 4 3/8'' x 1 1/4''. For Door: 5/8'' to 1 3/8''.
|
Flush Cup Door Latch from PERKO
Chrome plated zinc alloy with sliding lock button. For door thickness 3/4 to 1-1/8 inches. Supplied with black plastic spacer for surface mounting. Bevel/Strike Type: Regular w/Box. Case Dimensions: 2-1/8 x 1-3/4 .
|
Cabin Hatch/Vent from LEWMAR
Designed to fit Lewmar hatches or to be mounted on deck, this vent features a built-in gasketed bung that makes it 100% watertight. The trim piece is available for thru-deck installations. Includes mounting screws. Type: Passive vent . Material: Acrylic composite . Dimensions: 2-1/4"H x 6-3/4" Dia. . Cutout Size: 3" .
|
|
|
P750 Ice Eater, 115V, 25' Cord from POWER HOUSE
The P750 de-ices diameter of approximately 60 feet Prevent damaging ice formation around your boat’s hull with a 3/4 hp energy efficient Ice Eater. Motor is matched with a permanent-split capacitor to ensure quick, high-torque and smooth operation from the single-phase induction motor. Copper, stator motor windings are double-insulated, to guard against water. Internal, hard-faced mechanical seal is itself immersed in dielectric lubricating fluid and protects the motor against water intrusion.
|
Hatch - Ocean 60 Flat Base from LEWMAR
Well-engineered hatches with CE-certified quality materials and construction. Smoothly styled external hinge enables one-hand operation. Inside handles feature locks that cannot be forced from the outside. Flat base or 1'' flange base (pictured). 3-year warranty. Flat base cutout sizes: Ocean 10 - 10" x 10". Ocean 20 - 7-3/4"W x 13-1/2"L. Ocean 30 - 12-5/8"W x 17-3/4"L. Ocean 40 - 16-3/8" x 16-3/8". Ocean 44 - 17-3/16" x 17-3/16".
|
Standard Capacity Boji Water Softener, 5" x 24" from GENOVA PRODUCTS
Softens your water supply, yielding water that tastes fresher, is less corrosive to onboard plumbing and leaves fewer unsightly stains and water spots. Consists of a PVC cylinder containing a special Ion Exchange Resin that attracts hard substances in water (iron, calcium, etc. Complete kit includes the Boji Softener, a prefilter housing with activated carbon filter, 36" hose to connect Boji to prefilter, 3/4" hose fittings to plumb into water supply and molded integral feet.
|
Storage Locker with Hinged Door from SAIL SYSTEMS
Increase your available storage area and save space at the same time. This recessed storage locker uses a continuous stainless steel hinge on the access door for long-lasting strength. Made of weather-able, acrylic capped ABS plastic for superior gloss, color retention and UV protection. Measures 11 3/4"H x 19 3/4"W x 7 1/4"D.
|
Electric Bilge Pump Installation Kit from ANCOR MARINE
Essential items for installing a bilge pump Convenient package includes four #8 x 3/4" stainless-steel panhead screws, one 1-3/4" x 3/4" stainless steel hose clamp, and three 16-14AWG heat shrink butt connectors.
|
Stainless-Steel Compact Electric Horn - Double from AFI
Mini Twin Electric Horn Excellent for use in the marine environment. totally seal sound units have type 304 stainless cover, diaphragm and mounting brackets. Material: 304 stainless cover & horn diaphragm. Loudness dB: 106 dB. Approvals: ABYC for boats up to 20 meters. Dimensions: 3"L x 8"W x 1 3/4"H. Power Requirements: 12V. Draw: 3A @ 12V (max. 6A). Fundamental frequency: 490±20/440±20.
|
|
|
|
3, 3-3, 4" from PERKO, Cartridge from SIERRA, Gasket from SIERRA
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Awl-Fair Fairing Compound (Professional Application Only)
Awlfair L. W. is a premium, epoxy trowelable fairing compound used for fairing, levelling and smoothing surface imperfections, caused by gauges, pitting, dents or weld seams. For use above and below the waterline. Super smooth finish and easy sanding. Requires less working time.
Part No: OD8200/1QTUS
|
|
|
|
Home -> Cordage -> Anchor Line & Dock Line->Premium Navy Prespliced Three-Strand Nylon Dock Lines
Get the same premium docklines in a new color! Unique marine coating provides superior wet abrasion resistance. Professionally spliced 12" eye.
Part No: 8553-20-00035
|
|
|
|
Home -> Cabin & Galley -> Barbecues & Tables->Covers for Magma & West Marine Barbecues
Durable, mildew and fade resistant covers protect your grill from the corrosive marine elements. Drawstring provides a secure fit. Machine washable.
Part No: 7905ARWM
|
|
|
|
Home -> Engine Systems -> Engine Parts->Parts for 500, 900 & 1000 Turbine Series Filters
Parts for 500, 900 and 1000 Turbine Series Filters.
Part No: RK 11-1606-1
|
|
|
|
Home -> Electrical -> Shore Power -> Adapters, Plugs & Outlets->Shore Power One-Piece Adapters
Marinco straight adapters allow you to connect from one dockside receptacle (or other power source receptacle) to one boatside inlet or equipment of dissimilar power configuration. They are integral fittings with no wire between the end fittings. They are high-quality, but do not have sealing boots and are not recommended for use in wet applications.
Part No: 81A
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Dock Bumpers->Super Edge Dock Bumpers
Unique C-shape design provides protection on the top as well as the side of the dock–protecting any type of boat where the gunnel hangs over the dock. Polyester with closed-cell foam inner cushion. Will not deteriorate in the sun and cleans easily with liquid soap. Mounts using stainless steel screws.
Part No: SEDB3.60
|
|
|
|
Home -> Electronics -> Antennas, Mounts, Cable -> Antenna Mounts->Antenna Extensions
Increases antenna height for greater rangeDesigned to match your Galaxy antenna, with the same urethane finish and rugged construction. 1"-14 stainless-steel ferrules top and bottom. 3. 5' model should be used with a stainless steel mount and upper antenna bracket for strength. 8' model should be used with a two-piece mount for strength.
Part No: 5228-2
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Filter-Oil|**Filter-Oil.
Part No: 18-7871
|
|
|
|
Home -> Engine Systems -> Fuel Tanks->Multiple Tank Draw Valves
Connect multiple permanent tanks to a single engine. Provides withdrawal from one tank at a time, and provides anti-siphon protection. Meets ABYC H-24 fire test. NPT threaded female ports. Model 9398918 includes click-stop detents.
Part No: 033312-10
|
|
|
|
Sealed keyed switches with integral Deutsch connectors feature fully sealed contact areas with O-rings and ultrasonic welding to IP67 waterproof rating. High-impact plastic for corrosion resistance and tested to SAE J259 for ignition switches. Contact rating: 10A@12V DC, 5A@24V DC. Panel thickness: 3/8".
Part No: 95060-60-BP
|
|
|
|
Home -> Electrical -> Interior Lighting -> Incandescent Lights->Halogen Mini-Spot
Bright, concentrated illumination. The head rotates on two axis and has a built-in slide switch. Frame and lens are molded polycarbonate. 5W halogen bulb. Light Style: Bulkhead Light . Voltage/Draw: 12V DC/0. 42A . Bulb Wattage: 5W . Fixture Material: Molded Polycarbonate . Fixture Dimensions: 3-5/16"H x 2-1/2" dia. .
Part No: 15064-7
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting->Mounts & Accessories for Series 40 Navigation Lights
Designed to be used with the Series 40 Navigation Lights by AquaSignal.
Part No: 40901-1
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper->Gold 236U Sanding Discs
Economical, tough paper-backed discs offer long life and a consistent finish. Aluminum oxide mineral with a non-staining Fre-Cut coating resists loading. Excellent for gel coat, wood and plastic applications.
Part No: 86470
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Snap Shackles->Forged Snap Shackles
Highest quality drop-forged 17-4 PH stainless-steel shackles are beautifully polished, with smooth contours. Great strength and reliability.
Part No: 2474
|
|
|
|
Home -> Engine Systems -> Control Systems
Replaces: 73723A1 Mercruiser #1 Drives S/N 1562900-6225576 for forward installation into bell housing. Has new style armored strand construction (no support tube).
Part No: 18-2248
|
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Gasket-Oil Pan|**Gasket-Oil Pan.
Part No: 18-0405
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers->Trailer Hub Kits
These hubs come fully assembled with pregreased bearings, which cuts down on the mess and makes final installation on to the axle much easier.
Part No: 13100
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains -> Drive Train Parts->Drive Shaft Bellows
Drive shaft bellows come complete with clamps for secure installation.
Part No: 18-2744
|
|
|
|
Home -> Cordage -> Rigging Products->Quick Attach™ Stud Swage Fitting
The advantage of "Quick Attach" over conventional fittings is the arrangement of the wedges on the outside of the cable which makes assembly much easier and allows different types of wire to be used with the same fitting. The Suncor Quick Attach Stud mechanical swage fitting allows very fast attachment to any type of cable (1X19, 7X19, or 7X7) using only simple tools. Working Load Limit (WLL) is determined by the WLL of the wire being used.
Part No: C0772-1309
|
|
|
|
|
Home -> Electrical -> Interior Lighting -> Incandescent Lights->Halogen Mini-Spot
Bright, concentrated illumination. The head rotates on two axis and has a built-in slide switch. Frame and lens are molded polycarbonate. 5W halogen bulb. Light Style: Bulkhead Light . Voltage/Draw: 12V DC/0. 42A . Bulb Wattage: 5W . Fixture Material: Molded Polycarbonate . Fixture Dimensions: 3-5/16"H x 2-1/2" dia. .
Part No: 15061-7
|
|
|
|
Home -> Electrical -> Meters & Distribution -> High Amp Distribution->MaxiBus 250A
This heavy marine busbar is appropriate for use as a ship’s main DC positive or negative bus. Tin-plated copper bus available with 12 #10-32 screw terminals and two 5/16" studs or with four 5/16" studs only. Stud: 5/16" . DC Rating: 250A@48V . AC Rating: 250A@300V. Base Material: Lexan Polycarbonate . Dimensions: 8"L x 1. 5"W . Insulating Cover Available: Yes, #2711 available by Special Order .
Part No: 2105
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports -> Hatch Accessories->Stainless-Steel Gas Struts for Dock Boxes & Hatches
Made of corrosion resistant 316 stainless steel for extended service in demanding marine environments. Recommended by the manufacturer for use as dock box lid supports or hatch supports. Where use as a hatch cover support is desired, we recommend you base your selection upon the recommendation of the hatch manufacturer.
Part No: 1845
|
|
|
|
Home -> Engine Systems -> Engine Parts->Vernatube Exhaust Elbows
Designed to work well with Marine Muffler components, these elbows provide superb exhaust gas flow and smooth clamping surfaces. Made of the same high quality material as Vernatube exhaust tubing.
Part No: 1200171
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes -> Wipers->Pantographic Wiper Arms
Pantographic arms allow the wiper blade to remain in a vertical orientation, sweeping a more useful pattern on the windshield. Corrosion resistant construction holds up to salt water, and the motor shaft mount has a set screw for secure clamping. Includes an "articulated bend back" feature for easy window cleaning. Requires a heavy-duty motor with a 5/8" shaft. Fits the AFI 2000 and MRV motors.
Part No: 33032A
|
|
|
|
Keep your outboard looking good and protect it against the tough marine environment. Our motor hoods have been redesigned to better fit newer cowl sizes and later model engines.
Part No: 926116
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks
Chrome-plated bronze. Rubber bumper. Length: 3 1/4". Base O. D. : 1 15/16''.
Part No: 0574DP2CHR
|
|
|
|
Home -> Engine Systems -> Engine Instruments
Hourmeter, 10,000 hrs 12-32 vDC Style: Euro Beige Stainless Steel. Size: 2". Weight: .
Part No: 15124
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyestraps, Fairleads, Bails->Light-Duty Block Hangers
Forged stainless-steel construction.
Part No: 90-08
|
|
|
|
Home -> Sailboat -> Rigging Products->Turnbuckle, Toggle/Swage
Lengths are measured from bottom of swage hole to pin center.
Part No: TS071212
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting -> Navigation Lights->Masthead Lights
For powerboats and sailboats. Chrome-plated brass or chrome-plated zinc. Mounting Hardware: #4 FHMS Volts: 12V Draw: 0.
Part No: 1331DP0CHR
|
|
|
