Top Sellers
Impeller Kit - Neoprene (K) 2-1/4x2 from JABSCO
JABSCO Impellers Tough, long-lasting replacement impellers from the inventors of the flexible impeller pump. Use neoprene for most water-pumping applications.
|
Brass Reducer, 1/4"NPT x 1/8" FNPT from MOELLER
Barb-Fuel 1/4Fnp x 1/8Mnpt Brs|Barb-Fuel 1/4Fnp x 1/8Mnpt Brs.
|
Vertical Sidelights, White from PERKO
For powerboats and sailboats less than 20m or 65. 6'. Plastic frames with ultrasonically welded lenses and gasketed plastic bases. 2nm visibility. Per pair, except bi-color. Case Material: Plastic . Case Dimensions: 3-1/2"L x 2-1/4"W x 13/16"H . Mounting Hardware: #8 FHMS (sold separately) . Volts: 12V . Draw: 0. 7A .
|
Shower/Mixer Faucet Combo from SHURFLO
This shower mixer has a water conservation button built-in to the handle. Chrome-plated with an easy grip handle, ceramic disc valves and 72" retractable hose. Includes flexible 1/2" NPT connection hoses for easy installation. Material: Brass . Dimensions: 6"H x 6-3/8"W x 7-1/4"L . Port Sizes: 1/2" NPT . Clearance: 2-1/4" . Cutout Size: 2-1/2". Manufacturer's Documents Installation Guidelines.
|
57mm Black Magic AirBlock, High-Load Strap Head with Becket, 2,500lb. SWL, 3.6oz. from HARKEN
Strong, lightweight aluminum blocks for offshore boats Used for sheets, halyards, running backstays and control lines on offshore boats, these strong, lightweight blocks are made of sculpted aluminum with Torlon rollers and carbon black balls for strength and UV protection. Cheek Material/Finish: 6160-T6 Hardkote anodized aluminum . Sheave Size: 57mm (2-1/4") . Construction: Three fasteners for quick disassembly. Plastic isolators separate dissimilar metals. Three-way head system.
|
Trapeze & Vang Cleat from CLAMCLEAT
The cleat has an in-built pulley that offers a compact solution for rigging with a 1:1 or 2:1 advantage, where a quick, positive lock that is easy to release is required. The sailor's preferred choice for adjusting trapeze lines.
|
Flush Cup Door Latch from PERKO
Chrome plated zinc alloy with sliding lock button. For door thickness 3/4 to 1-1/8 inches. Supplied with black plastic spacer for surface mounting. Bevel/Strike Type: Regular w/Box. Case Dimensions: 2-1/8 x 1-3/4 .
|
Screen Kit Hinge from LEWMAR
Allows the aluminum framed screen included with Lewmar Trim and Screen Kits to be hinged for easier access to the hatch.
|
Rounded Oval, 8-1/2"W x 11-1/4"L x 5-1/4"D, 1" Flange, 1-1/2" Drain from AMBASSADOR MARINE
Made from 304 stainless steel and mirror-polished to a deep luster, these sinks incorporate SoundKOTE Noise Reduction Technology to reduce the unpleasant clanging associated with many metal sinks. Flanges permit over- or under-the-counter mounting. Low-Profile 90° drains fit standard 1"ID hose and are slanted to maximize drainage.
|
CARB GASKET KIT from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Yamaha Carb Kit from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
20 Amp Pushbutton Thermal Circuit Breaker from SIERRA
Very common pushbutton breakers for DC loads. Uses two-blade terminals. Mounts in 3/8" hole. Can be used with a waterproof boot over the button. Buttons are white. Switch Type: Pushbutton . Voltage Compatibility: DC . Safety Features: Waterproof boots available . Housing Material: Plastic . Housing Dimensions: 1. 75" x 1.
|
|
|
|
|
Small Recessed Transom Shower from SHURFLO
Ideal for mounting to any horizontal surface. Kit includes spray nozzle, hose and necessary hardware for easy installation. White. Material: ABS plastic . Dimensions: 3-7/8"H x 3"W x 2-7/8"L . Port Sizes: 1/2" NPT . Clearance: 2-1/4" .
|
|
from LEWMAR, 1, 1-1, Kit from SIERRA, 2-1, 75" from GARELICK, 2" NPT from SEAFIT
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Heavy-Duty Lugs
Tin-plated finish and fully annealed. Made of high-grade electrolytic copper with a flared end for easy wire insertion and seamless construction. AWG identification. Style: Lug . Conductor Material: Tinned Copper . Wire Attachment Method: hand or auto crimp tool .
Part No: 242264
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->Marine AC 80 - Pure Epoxy, (Commercial/Industrial Only)
Marine AC 80 - Pure Epoxy - Commercial/Industrial Only A surface tolerant, two part 80% solids pure epoxy anticorrosive primer. Epoxy anticorrosive coating for use on the entire vessel: Underwater, topside, deck, house, water ballast tank, cofferdam, voids, cargo holds and internal spaces. High solids epoxy. Specifically designed for Steel and for (select styles) aluminum ships.
Part No: 8009K
|
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Heavy-Duty Lugs
Tin-plated finish and fully annealed. Made of high-grade electrolytic copper with a flared end for easy wire insertion and seamless construction. AWG identification. Style: Lug . Conductor Material: Tinned Copper . Wire Attachment Method: hand or auto crimp tool .
Part No: 242276
|
|
|
|
Home -> Sailboat -> Blocks->60mm Synchro Blocks
Lewmar's Synchro blocks are more efficient, less expensive Lewmar's Synchro blocks combine geometry, sheave ratios and a unique free spin bearing, to deliver performance that’s comparable to ball and roller bearing blocks used in pro racing—at a more affordable price. Synchro blocks provide the optimal ratio between line size, sheave diameter and the interface between rope and sheave. This new range of blocks transforms performance, not only by improving efficiency, but also speed and handling.
Part No: 29926005
|
|
|
|
Home -> Seating & Covers -> Carpet, Vinyl & Canvas->Seaquest Vinyl Fabric - Flat Or Pleated
Designed specifically for all types of marine and outdoor applications, Seaquest vinyl is available plain (flat), or pleated with 1 1/2 inch pleats and embossed stitching. Polyester filled channels add depth to pleats. Width: 54 inches Weight: 32oz.
Part No: SQ13
|
|
|
|
|
Home -> Seating & Covers -> Carpet, Vinyl & Canvas->Seaquest Vinyl Fabric - Flat Or Pleated
Designed specifically for all types of marine and outdoor applications, Seaquest vinyl is available plain (flat), or pleated with 1 1/2 inch pleats and embossed stitching. Polyester filled channels add depth to pleats. Width: 54 inches Weight: 32oz.
Part No: SQ15
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Bronze Tees
Bronze Tees.
Part No: 479638
|
|
|
|
Home -> Anchor & Docking -> Windlasses & Rollers->Electric Deck Switches
Electric Deck Switches.
Part No: 69000352
|
|
|
|
Home -> Seating & Covers -> Seating->Surface Mount Base Table Pedestal
Stowable table pedestal for larger boats. Surface Mount Base with Fluted Anodized Tube, complete 3-piece set 30" (76cm) Provides salon areas and pontoon decks with removable dinette tables. Engineered for marine use. 3 piece, all-aluminum provides solid table base. Fluted profile stanchion with protective anodized finish. Quick stowag.
Part No: 75358:01
|
|
|
|
Home -> Safety -> Life Jackets -> Life Jacket Accessories->T-Bag Storage Pack
You’ll always know where to find your life jackets with the specially designed T-Bag Storage Pack. Engineered to mount easily to all T-Tops and many pontoon tops, these packs keep your vests clean as well as on hand. Organize safety gear in the two zippered mesh compartments or stretch cord that zigzags across the bottom. Vests are easily accessible via the rugged zipper flap . Constructed of durable 600-denier UV- and water resistant polyester back cloth .
Part No: PFDT-6
|
|
|
|
Home -> Engine Systems -> Engine Parts->Hotshield Fiberglass Tape
This insulating fiberglass tape is the proper way to contain the heat radiated by hot manifolds, exhaust pipes and mufflers. Simply wrap the tape around the manifold, exhaust pipe or muffler, and secure with locking wire. 10 feet of . 041" stainless steel locking wire included.
Part No: 20010
|
|
|
|
Home -> Cabinet & Deck Hardware -> Rail Fittings & Rub Rail->Stainless Handrails
Tubular stainless steel rails with welded stud ends. Studs are 1/4" x 20 bolts, 2"L.
Part No: 74024
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks -> Catches & Latches->Stainless Steel Latch-Tite™ Lifting Handles
Latches, shafts and tongues are made from cast 316 marine-grade stainless steel.
Part No: F16-2525-1W
|
|
|
|
Home -> Fishing -> Fishing Accessories->Stainless Steel T-Tops & Accessories
Stainless Steel T-Tops & Accessories Standoffs, canvass, electronics box and storage bag sold separately.
Part No: 52408
|
|
|
|
An economical solution for high amperage loads where dependability is required in marine environments. Waterproof and ignition-protected (conforming to SAE J1171) so these circuit breakers are safe for installation aboard gasoline-powered boats. Ideal for branch circuits, windlasses, inverters and watermakers. False-trip free—designed to trip when subjected to a fault current. Available in panel and surface mounts. Interrupt Rating: 3000A at 12V DC. Voltage Compatibility: 42V DC.
Part No: 7102
|
|
|
|
|
Home -> Seating & Covers -> Carpet, Vinyl & Canvas->Seaquest Vinyl Fabric - Flat Or Pleated
Designed specifically for all types of marine and outdoor applications, Seaquest vinyl is available plain (flat), or pleated with 1 1/2 inch pleats and embossed stitching. Polyester filled channels add depth to pleats. Width: 54 inches Weight: 32oz.
Part No: SQ14
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->545 Anti-Corrosive Epoxy Primer, (Professional Application Only)
For steel, aluminum, wood or fiberglass. Spray, brush, roll on. Covers up to 497 sq. ft. /gal. Recoat in 12 hours. NOTE: Awlgrip is intended for professional application only and is not available for sale to retail customers.
Part No: OD8001/1QTUS
|
|
|
|
Home -> Cabinet & Deck Hardware -> Deck Plates & Storage -> Deck Plates->Locking Composite Deck Plates
These deck plates are made of high-tech composites for the greatest resistance to UV damage. Non-skid center with flush locking tab. Just pull the tab up to open.
Part No: G845
|
|
|
|
Home -> Cordage -> Rigging Products->Hi-MOD Compression Studs
These slim Hi-MOD compression fittings are at least as strong as the rated breaking load of the rigging wire, and they work equally well with right/left hand lay wire. " The shallow angled cone establishes direct mechanical grip on the wire's core and all the outer strands. Constructed from 316 stainless steel, with aluminum/bronze crown rings, they can be taken apart for maintenance and re-used without the need for new parts (provided that no overloading has occurred).
Part No: 38CTS14
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->Clear-Step Furling Blocks
This block leads the furling line outside your stanchions to keep furling lines out of the way. Slips over stanchions and secures by a simple set screw.
Part No: 506-44
|
|
|
|
Home -> Cabin & Galley -> Containers & Storage
Tournament Series™ Cockpit Organizer Fabricated from polished 304 grade stainless steel. . Great for fishing gear, binoculars and other personal items. Stainless mounting hardware included. Packed in clear sealed clamshell with four color graphics and mounting instructions. Size: 12. 5”L x 4. 5”W x 4.
Part No: 2213-0
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring -> Anchor Chain->Pre-Cut Proof Coil Chain, Assorted Lengths
Precut chain lengths make outfitting an anchor easier galvanized to prevent corrosionHandy lengths of hot dip proof coil chain, either plain or coated. Polymer coating is a thin, flexible coating that improves the chain’s appearance and provides a modest amount of protection for your deck. Vinyl coating is thicker, which limits the flexibility of the chain but provides outstanding protection for your deck. Large end links to fit oversized shackles. Hot dip proof coil chain plain or coated.
Part No: 4069-80506
|
|
|
|
Home -> Sailboat -> Rigging Products->Extra Long Stud Terminals
Norseman Swageless Stud Terminals provide a completely secure end fitting on conventionally constructed strand, Dyform strand or 7-strand wire. They can be rigged at sea in minutes without special tools and can be inspected simply by unscrewing the assembly. The standard terminal can be used on 1x19 strand, 1x19 Dyform and 7-strand rope, using the appropriate cones. 316 stainless steel. Stud end to wire end. Terminals are reusable, but they must have a new cone.
Part No: N030L-0612
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes->Kite Accessories
Kite Line I Assembly Ready Rigged Kite Lines come complete with three Tigress release clips on 250ft. Kite Line II Assembly Ready Rigged Kite Lines come complete with two tigress release clips on 250ft. of 80 lb. Kite Line III Assembly Ready Rigged Kite Lines come complete with two Tigress release clips on 250ft. Helium Balloons These Kite Fishing Balloons are ideal for adding that extra lift to kites on those light wind days or used on their own when there is no wind. High quality balloons.
Part No: 88614
|
|
|
|
Home -> Engine Systems -> Engine Parts
Cap & Rotor Kits, Cap Only, and Rotor Only.
|
|
|
|
Home -> Safety -> Man Overboard Gear
Mustang Survival Rescue Stick™ Rearming Kit (Model 8661423).
Part No: MA7206
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Bronze 90º Street Ells
Bronze 90º Street Ells.
Part No: 479618
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Bilge Pump Kit|**Bilge Pump Kit.
Part No: 18-3597
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Primers, Undercoats & Non-Skid
Provides corrosion and rust-resistance on steel or aluminum. A corrosion-inhibiting pigment keeps the metal surface in good condition and enhances adhesion to metal of primers and topcoats applied over it. Not recommended for wood or fiberglass. Drying, Overcoat: 2-24 hours Thinner: Denatured alcohol Coverage: 400-600 sq. ft. /gal.
Part No: 6455/044Q
|
|
|
|
Home -> Boats & Motors -> Kayaks & Canoes
Optional Deck Skirt to convert your AdvancedFrame Convertible™ Kayak to a single-skirted boat (sold separately).
Part No: AE2021-WM
|
|
|
