Welcome! Please Sign-In
Top Sellers
CARB GASKET KIT from SIERRA
CARB GASKET KIT from SIERRA
Sierra carb kits and gaskets for engine tune ups.
Yamaha Carb Kit from SIERRA
Yamaha Carb Kit from SIERRA
Sierra carb kits and gaskets for engine tune ups.
Replaces OMC P/N 378444 from SIERRA
Replaces OMC P/N 378444 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
Impeller, 18-3062 from SIERRA
Impeller, 18-3062 from SIERRA
Recommended replacement schedule is every 3 years for fresh water and every year for salt water Click to view a Sierra Impeller Application Chart (PDF) For further assistance, have your year & model information handy and call our Product Advisors at 1-800-BOATING.
For Chrysler/Force, 89-817109A2 from SIERRA
For Chrysler/Force, 89-817109A2 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
10 Micron Replacement Filter Element for OMC 502905 from SIERRA
10 Micron Replacement Filter Element for OMC 502905 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. Today’s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage.
Water Circulating Pump - #18-3581 - Chrysler Inbd # 3004886, 3619542, 3619859, 3745985 from SIERRA
Water Circulating Pump - #18-3581 - Chrysler Inbd # 3004886, 3619542, 3619859, 3745985 from SIERRA
Water Pumps The water pump is the heart of your inboard or I/O cooling system. All Sierra pumps are bidirectional and can be installed on reverse rotation engines. The pumps are also powder coated for additional protection. Includes mounting gasket. Pumps include brass bi-directional impellers, brass plugs and fittings, carbon resin seal, all mounting gaskets, stainless steel seal cup and spring, stainless steel back plate (where required), and powder coating for maximum corrosion protection.
Johnson/Evinrude Outboard Starter, 120 to 140hp V4 (1985-99), 10 tooth drive gear from SIERRA
Johnson/Evinrude Outboard Starter, 120 to 140hp V4 (1985-99), 10 tooth drive gear from SIERRA
Sierra's new and remanufactured starters are the only marine starters that meet Marine UL standards. Sierra's remanufactured starters all have new solenoids, drives, bushings, brushes and springs. The bodies are powder coated for greater corrosion resistance. Sierra has entered an agreement with United Technologies to market their complete line of outboard starters and components. All are 100% load tested . Our remanufactured starters are covered by Sierra's customer satisfaction warranty .
30GPH Cartridge, Replaces Racor S3240 from SIERRA
30GPH Cartridge, Replaces Racor S3240 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
60GPH Cartridge, Replaces Racor S3227 from SIERRA
60GPH Cartridge, Replaces Racor S3227 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
Fits all Cobra. Replaces OMC 914036 from SIERRA
Fits all Cobra. Replaces OMC 914036 from SIERRA
Seals the exhaust/water flow from the manifold to the exhaust outlet in the drive.
Sierra-Tube-Exhaust from SIERRA
Sierra-Tube-Exhaust from SIERRA
Some larger V-8 engines that create a large amount of back pressure use exhaust tubes rather than bellows. This helps to relieve the excessive pressure and eliminate problems with premature bellows failure. In the past, the exhaust bellows would blow up like a balloon and cause the drive shaft bellows to rub against the yoke and U-joints causing holes in the bellows.
Prop Nut Kit, Yamaha V4/V6 from SIERRA
Prop Nut Kit, Yamaha V4/V6 from SIERRA
An excellent emergency item to carry in your toolbox, for those occasions when the prop nut is misplaced or lost.
Exhaust Flapper Valve - 4" from SIERRA
Exhaust Flapper Valve - 4" from SIERRA
Heavy duty rubber flapper valve keeps following seas from entering exhaust outlet when moving slowly or stopping.
Johnson/Evinrude, motor only, for 2-wire systems, 90–225hp (1991–1999) from SIERRA

Cobra from SIERRA, Propnut from SIERRA, Tool from SIERRA

10" dia. Off-White Deck Plate, 12-1/2" Flange, 10-1/2" Cutout Size from BOMAR Home -> Cabinet & Deck Hardware -> Deck Plates & Storage -> Deck Plates->Locking Composite Deck Plates
These deck plates are made of high-tech composites for the greatest resistance to UV damage. Non-skid center with flush locking tab. Just pull the tab up to open.
Part No: G844
Surface Mount Thermal Circuit Breaker, 80A from BLUE SEA SYSTEMS An economical solution for high amperage loads where dependability is required in marine environments. Waterproof and ignition-protected (conforming to SAE J1171) so these circuit breakers are safe for installation aboard gasoline-powered boats. Ideal for branch circuits, windlasses, inverters and watermakers. False-trip free—designed to trip when subjected to a fault current. Available in panel and surface mounts. Interrupt Rating: 3000A at 12V DC. Voltage Compatibility: 42V DC.
Part No: 7114
Captive Thimble Shackle, 5/16" Dia., 7/8" ID, 6650lbs. Breaking Strength from WICHARD Home -> Sailboat -> Shackles, Snaps & Fittings->Bow, Keypin, “D,” Long “D” & Twisted “D” Shackles
Legendary for their quality, beautiful polish and smooth contours. Drop-forged stainless steel ensures that shape remains intact at loads that meet or exceed the deformation point.
Part No: 1494
Pump Kit from SIERRA Home -> Engine Systems -> Engine Parts
**RepairKit-WaterPump|**RepairKit-WaterPump.
Part No: 18-3253
Anode Kit-Aluminum from MERCURY MARINE Home -> Engine Systems -> Engine Parts -> Mercury Ob Repair Parts
This is a complete anode kit to replace all factory installed anodes found on the drive unit. Fits 1988 and newer Bravo II drives (s/n 0B664190 and up) . Fits 1995-2002 Bravo III drives (s/n 0F345868-0M179451) .
Part No: 888761Q03
WATER PUMP REPAIR KIT YAMAHA from SIERRA Home -> Engine Systems -> Engine Parts->Impeller Repair Kits for Outboards
PUMP, WATER REPAIR KIT.
Part No: 18-3395
3" x 5" Replacement Bulb from JABSCO Home -> Electrical -> Exterior & Navigation Lighting->Tungsten Halogen Floodlights & Replacement Bulbs
Unique trapezoidal light beam provides excellent and even floodlight coverage. Tungsten halogen 50W bulbs produce 9,900cp. The totally weatherproof housing is high-impact polypropylene with stainless steel fittings. Mounting bracket included. Average bulb life: 450 hours. Draw: 4A@12V DC.
Part No: 45903-0002
Cable-33 Supreme 9 from TELEFLEX Home -> Engine Systems -> Control Systems -> Control Cables->33C Supreme Red-Jacket Cables
.
Part No: 301947-03-108.0
White Poly Handrail - 4 Loop from AFI Home -> Cabinet & Deck Hardware -> Rail Fittings & Rub Rail->Plastic Handles and Hand Rails
Plastic handles and hand rails. Handles available in black or white PVC coated plastic. Handrails are white polypropolene. Handles are 10" long Handrails are 1 1/16W x 1 3/8"H. 1 loop: 13"L. 2 loop: 23"L. 3 loop: 33"L.
Part No: 65106
US Coast Guard, Dive Band from EMTECH LA COSTA Dive rated to 200m. Watches feature precise quartz motion and rotating dive bezel. Glow-in-the-dark hour marks and watch hands help you read in low-light situations. On the two stainless-steel watches, the date is displayed on the right of the face with a special magnified mineral lens. Available in three face styles: Red U. S. Marine Corps insignia with eagle and globe Blue U. S. Navy insignia with eagle and galleon Black U. S.
Part No: 50444
ALK Commercial Primer, White, Gal from BLUE WATER MARINE PA Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Marine Alkyd 50, (Commercial/Industrial Only)
Marine Alkyd 50 - Commercial/Industrial Only Marine Alkyd 50 is a single component marine grade alkyd finish. High gloss and good color retention. Fast drying and good leveling characteristics. Good resistance to chemicals cleaners and abrasion. Specifically designed for Steel and for (select styles) aluminum ships.
Part No: 3035G
AC80 Commercial Kit, Red Oxide, Gal from BLUE WATER MARINE PA Home -> Paint & Maintenance -> Epoxy & Fiberglass->Marine AC 80 - Pure Epoxy, (Commercial/Industrial Only)
Marine AC 80 - Pure Epoxy - Commercial/Industrial Only A surface tolerant, two part 80% solids pure epoxy anticorrosive primer. Epoxy anticorrosive coating for use on the entire vessel: Underwater, topside, deck, house, water ballast tank, cofferdam, voids, cargo holds and internal spaces. High solids epoxy. Specifically designed for Steel and for (select styles) aluminum ships.
Part No: 8012K
Propnut from SIERRA Home -> Engine Systems -> Propellers & Drive Trains
**Nut-Prop Kit|**Nut-Prop Kit.
Part No: 18-3755D
Upper Unit Seal Kit - OMC Sterndrive/Cobra from SIERRA Home -> Engine Systems -> Propellers & Drive Trains
For 100-245 Stringer Unit (1968-72) Replaces 981799 Contains: One (1) Upper Gearcase Gasket (18-0939) - OE #315189. Four (4) Oil Seals (18-2073) - OE #981268. One (1) Rubber Seal (18-3111) - OE #907774. Two (2) Washers (18-4248) - OE #311598. Four (4) O-Rings (18-7103) - OE #308624. One (1) O-ring (18-7107) - OE #313175. One (1) O-Ring (18-7121) - OE #308621. One (1) O-Ring (18-7134) - OE #303059. One (1) O-Ring (18-7146) - OE #554545. Two (2) O-Rings (18-7198) - OE #308626.
Part No: 18-2666
Seaquest Vinyl - Pleated, Ebony from REDRUM FABRICS Home -> Seating & Covers -> Carpet, Vinyl & Canvas->Seaquest Vinyl Fabric - Flat Or Pleated
Designed specifically for all types of marine and outdoor applications, Seaquest vinyl is available plain (flat), or pleated with 1 1/2 inch pleats and embossed stitching. Polyester filled channels add depth to pleats. Width: 54 inches Weight: 32oz.
Part No: SQ7
1-1/2" Thru-Hull Fitting, 5" Max. Hull Thickness from CONBRACO Home -> Plumbing -> Fittings & Valves->Bronze Mushroom Head Threaded Thru-Hull Fittings, Extra Long
Bronze Mushroom Head Threaded Thru-Hull Fittings, Extra Long.
Part No: 65-BN8-06
3/16" Wire Size, 3/8" Pin dia., 9-1/4" Min. Length, 13-3/16" Max Length, 8900lb. Breaking Strength from ALEXANDER-ROBERTS Home -> Sailboat -> Rigging Products->Turnbuckle, Toggle/Swage
Lengths are measured from bottom of swage hole to pin center.
Part No: TS061212
Quest Compass White from DANFORTH Home -> Navigation -> Compasses & Navigation Tools->Danforth Quest Series Compasses
Mounts anywhere, no drilling required Sporty, high-performance compasses with NO-SPIN card technology give you accurate, rock steady readings in a compact size. The unique, fully adjustable bracket design lets you mount your compass on any surface–even overhead—with the adhesive mounting disc provided. The use of screws is optional. 2" direct read card with 5° increments features 12V night lighting and built-in compensators. Apparent Card Dia. Card Type: Direct-read . Lubberlines: No .
Part No: C101
Panel Mount Thermal Circuit Breaker, 100A from BLUE SEA SYSTEMS An economical solution for high amperage loads where dependability is required in marine environments. Waterproof and ignition-protected (conforming to SAE J1171) so these circuit breakers are safe for installation aboard gasoline-powered boats. Ideal for branch circuits, windlasses, inverters and watermakers. False-trip free—designed to trip when subjected to a fault current. Available in panel and surface mounts. Interrupt Rating: 3000A at 12V DC. Voltage Compatibility: 42V DC.
Part No: 7002
Drogue - 32" from HART And HART MFG. Home -> Fishing -> Fishing Accessories->Drogues
Fish in comfort, even in high winds. Stabilize your drifting angle along banks or channels with this fishing aid It slows the boat's rate of drift in 15mph winds and up Can slow down your trolling speed 32" is for 16-22 ft.
Part No: 501
Medium Turnbuckle Cover, 1/2" Turnbuckle, 1-1/2" x 14"H from WEST MARINE Home -> Sailboat -> Rigging Products->Leather Turnbuckle Covers
Add a distinctive look and chafe protection, too. Natural gray leather attaches and removes easily with hook-and-loop strips.
Part No: 1405-14
Seaquest Vinyl - Pleated, American Beauty from REDRUM FABRICS Home -> Seating & Covers -> Carpet, Vinyl & Canvas->Seaquest Vinyl Fabric - Flat Or Pleated
Designed specifically for all types of marine and outdoor applications, Seaquest vinyl is available plain (flat), or pleated with 1 1/2 inch pleats and embossed stitching. Polyester filled channels add depth to pleats. Width: 54 inches Weight: 32oz.
Part No: SQ11
Tool from SIERRA Home -> Engine Systems -> Engine Parts -> Tune Up Parts
**Tool-Sleeve Removal|**Tool-Sleeve Removal.
Part No: 18-9871
Gas-Tank Vent from PERKO Home -> Engine Systems -> Fuel Tanks->Gas-Tank Vent
Chrome-plated, pressure-cast bronze with removable monel 30 mesh wire screening. USCG-approved. Model 256479 has 90º angle.
Part No: 0503DP4CHR
Panel Mount Thermal Circuit Breaker, 50A from BLUE SEA SYSTEMS An economical solution for high amperage loads where dependability is required in marine environments. Waterproof and ignition-protected (conforming to SAE J1171) so these circuit breakers are safe for installation aboard gasoline-powered boats. Ideal for branch circuits, windlasses, inverters and watermakers. False-trip free—designed to trip when subjected to a fault current. Available in panel and surface mounts. Interrupt Rating: 3000A at 12V DC. Voltage Compatibility: 42V DC.
Part No: 7000
Anti Theft Cable for the 8 Preson Liferaft from PLASTIMO Home -> Safety -> PLBs, EPIRBs, Life Rafts, Survival->Anti Theft Cable for Offshore Plus Liferaft
Anti-theft cables (supplied without padlock) For cradle A & B 40450 For cradle C & E 23136 For cradle D 40452.
Part No: 23136
Premier Stainless Steel Adjustable Arm, 10"-15" from AFI Home -> Engine Systems -> Horns/Wipers/Glove Boxes->Windshield Wiper Blades, Arms, Motors, and Kits
#32002 and 32003 have 110º adjustable sweep motor. #32000 and 32002 have 2-1/2" shaft length motor and are Windshield Frame Mount. 12 volt, 2 amps. AFI STD Wiper Motor with 11 inch stainless steel standard straight blade (33001) and adjustable (7-1/2 inches to 12 inches) stainless steel arm (33002) . Note: motor is not waterproof and is recommended for interior installations only. AFI Wiper Motors AFI-1000 is waterproof and powers 18" x 18" arm/blade combinations.
Part No: 33082
Fence Saver Fender for Pontoon boats from TAYLOR Home -> Anchor & Docking -> Fenders & Docking -> Fenders
Protects the delicate aluminum fencing on pontoon boats from dings that occur when rafting with conventional-hull boats. Shape: Half Cylinder. Attachment Method: Attach to Rail. External Surface: Ribbed. Color: White.
Part No: 31032
12 Position Fuse Block with Ground from BLUE SEA SYSTEMS Home -> Electrical -> Switches, Fuses & Accessories->ST Blade Fuse Blocks
Clear insulating cover insulates all conductive parts meeting ABYC/USCG requirements, and color-coding makes determining amperage easy. Tin-plated copper buses and fuse clips give 30A per circuit. Accepts ATO and ATC fast acting blade type fuses and plug-in style circuit breakers. Max. 100A@32V DC. Write-on labels included. Manufacturer's Documents Dimensioned Drawing . ST Blade Fuse Blocks Data Sheet.
Part No: 5026
Sail Track, 7/8"W x 6'L, #8 Fasteners from SCHAEFER Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Sail Track
Type 304 stainless steel. Hole spacing: 2-3/4" on center.
Part No: 75-07-72 inch
   Company History
   Mission Statement
   Press Room
   Careers at West Marine
   Affiliate Program
   Annual Catalog
   Store Locator
   And More...
   Stock Price
   Press Releases
   SEC Filings
   Email Alerts
   Analyst Coverage
   Management Team
   Financial FAQ
   And More...
   Terms Of Use
   Returns/Exchanges
   Privacy Policy
   Contact Us
   Site Map
   Annual Catalog
   Product Recalls
   And More...
Product offering and prices listed on this website (www.westmarine.com) are limited to Internet and phone orders (1-800-BOATING). Prices on periodic web-only specials apply only to Internet orders. Product offering and/or prices may vary at West Marine retail stores. ©2009 West Marine | All Rights Reservedpics11