Top Sellers
CARB GASKET KIT from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Yamaha Carb Kit from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Replaces OMC P/N 378444 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
Impeller, 18-3062 from SIERRA
Recommended replacement schedule is every 3 years for fresh water and every year for salt water Click to view a Sierra Impeller Application Chart (PDF) For further assistance, have your year & model information handy and call our Product Advisors at 1-800-BOATING.
|
For Chrysler/Force, 89-817109A2 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
Water Circulating Pump - #18-3581 - Chrysler Inbd # 3004886, 3619542, 3619859, 3745985 from SIERRA
Water Pumps The water pump is the heart of your inboard or I/O cooling system. All Sierra pumps are bidirectional and can be installed on reverse rotation engines. The pumps are also powder coated for additional protection. Includes mounting gasket. Pumps include brass bi-directional impellers, brass plugs and fittings, carbon resin seal, all mounting gaskets, stainless steel seal cup and spring, stainless steel back plate (where required), and powder coating for maximum corrosion protection.
|
Outdrive Gasket Set, 18-260, TR/TRS, 1973-1993 from SIERRA
Gasket and O-ring kits that seal the drive to the transom.
|
10 Micron Replacement Filter Element for OMC 502905 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. Today’s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage.
|
Johnson/Evinrude Outboard Starter, 120 to 140hp V4 (1985-99), 10 tooth drive gear from SIERRA
Sierra's new and remanufactured starters are the only marine starters that meet Marine UL standards. Sierra's remanufactured starters all have new solenoids, drives, bushings, brushes and springs. The bodies are powder coated for greater corrosion resistance. Sierra has entered an agreement with United Technologies to market their complete line of outboard starters and components. All are 100% load tested . Our remanufactured starters are covered by Sierra's customer satisfaction warranty .
|
30GPH Cartridge, Replaces Racor S3240 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
|
60GPH Cartridge, Replaces Racor S3227 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
|
8V-92, 8V71, replaces Detroit Diesel 5574508 from SIERRA
Remove harmful contaminants without filtering detergent additivesRemove harmful contaminants without filtering detergent additives. Engineered for long life, low restriction and efficient filtering performance.
|
|
|
Sierra-Tube-Exhaust from SIERRA
Some larger V-8 engines that create a large amount of back pressure use exhaust tubes rather than bellows. This helps to relieve the excessive pressure and eliminate problems with premature bellows failure. In the past, the exhaust bellows would blow up like a balloon and cause the drive shaft bellows to rub against the yoke and U-joints causing holes in the bellows.
|
Prop Nut Kit, Yamaha V4/V6 from SIERRA
An excellent emergency item to carry in your toolbox, for those occasions when the prop nut is misplaced or lost.
|
|
from HARKEN, Gasket from SIERRA, Additive from SIERRA
|
|
Home -> Sailboat -> Sailboat Canvas -> Winch Wheel & Acc. Cove->Bulkhead Sheet Bags
"Easy to remove and store in the cabin so they don’t get weather-beaten. " Keep sheets and other gear organized and out of the way Tough, UV-protected nylon sheet bags mount to your bulkhead easily and reduce clutter while underway. The sides of each bag cinch in with bungee cord to help keep contents contained. The Combi sheet bags feature two additional inside pockets for holding winch handles or drinks . An outside mesh pocket that keeps your wetnotes or multi-tool handy.
Part No: BP505
|
|
|
|
Home -> Sailboat -> Blocks->Big Bullet Blocks
Can be used as main or jib sheet blocks on dinghies, or for control line applications, such as travelers, cunninghams or boom vangs on offshore boats. Where applicable, blocks use #10 fasteners. Sheave: Delrin. Sheave Size: 1-1/2" (38mm). Ball Bearings: Delrin. Line Diameter: 3/8" . Cheek Material/Finish: Plastic/stainless straps.
Part No: 128
|
|
|
|
Home -> Sailboat -> Blocks->7 Series Universal Head Blocks
Universal head allows one block to function as a front shackle, side shackle, or swivel shackle block. Large sheave diameter and high working loads make them suitable for sheet and control blocks on medium to large offshore boats. Beckets are removable. 704 series are aluminum; 705 blocks are stainless. Where applicable, blocks use 1/4'' fasteners. Each ShWt 1, except fiddles ShWt 2 Sheave diameter: 2 3/8'' (60mm) Maximum line diameter: 9/16'' Maximum working load: 2250 lbs.
Part No: 704-05
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> Mainsheet Traveler->Small Boat Traveler Track & Accessories
Accepts all Harken Small Boat cars. Use low-beam when track is supported at each fastener hole. High-beam can span unsupported areas. Holes on 100mm centers.
Part No: 2720.1.2M
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports -> Exterior Vents->Dorade Boxes
Teak dorades are made with high-grade Burmese 3/4" thick teak with epoxied, biscuited joints for superior strength Bodega and Chesapeake models include baffles while the Newport model is designed to be used in conjunction with a mushroom vent that becomes the water trap Mounting hardware is included Fasteners sold separately.
Part No: 31380
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> Mainsheet Traveler->Midrange Control Black Accessories
Midrange traveler end controls allow installation of traveler purchase from 2:1 to 4:1, fastening directly to the track without extra holes in the deck.
Part No: 1561
|
|
|
|
Home -> Sailboat -> Winches -> Winch Repair Parts->Self-Tailing Winch Spare Feeder Arms
Self-Tailing Winch Spare Feeder Arms, Chrome.
Part No: 48000484
|
|
|
|
Home -> Sailboat -> Winches -> Winch Repair Parts->Self-Tailing Winch Spare Feeder Arms
Self-Tailing Winch Spare Feeder Arms, Chrome.
Part No: 48000480
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Docks And Accessories->Bird Spiders
Stainless steel “arms” of the Bird Spider move with the breeze, deterring birds from landing and causing damage to your boat, rooftop, lights, signs and more. It’s easy to install and maintain and will not harm people or birds.
Part No: MMBS800/BT
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Filter-Air|**Filter-Air.
Part No: 18-7907
|
|
|
|
Home -> Engine Systems -> Engine Parts
**SealKit-Gear Housing|**SealKit-Gear Housing.
Part No: 18-0024
|
|
|
|
Home -> Engine Systems -> Engine Parts
**RepairKit-WaterPump|**RepairKit-WaterPump.
Part No: 18-3312
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring -> Anchor Hardware
Double-end jaw and jaw swivel keeps bow and anchor aligned. Includes stainless-steel locking rings to prevent loosening of shackle pins. Handles 1/4" and 5/16" High Test (matches the load limit of 5/16" HT) and 3/8" BBB chain. Maintenance-free, non-corroding galvanized construction. 1500lb.
Part No: 440640011
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Ball Bearing|**Ball Bearing.
Part No: 18-1190
|
|
|
|
Home -> Engine Systems -> Engine Parts
For most popular marine versions of: Chevrolet In-line 4 & 6 cylinder V6 & V8 Engines and Ford 5. Minimizes inventory investment to cover most major engine applications. Maximizes inventory utilizations via mix and match system. Utilizes generic type gasket kits common among all engine brands. e. 7L) Crusader & Mercruiser would use the same short block & valve grind gasket sets, but would use different exhaust manifold gasket kits). Set 18-1274 contains: 18-2946 - Head Gasket.
Part No: 18-1274
|
|
|
|
Home -> Engine Systems -> Engine Parts
**CarburetorKit|**CarburetorKit.
Part No: 18-7071
|
|
|
|
Home -> Engine Systems -> Engine Lubrication -> Fuel Additives
**Additive-Fuel Stabilizer Ga|**Additive-Fuel Stabilizer Ga.
Part No: 18-9080
|
|
|
|
Home -> Sailboat -> Winches -> Winch Repair Parts->Self-Tailing Winch Spare Feeder Arms
Self-Tailing Winch Spare Feeder Arms, Chrome.
Part No: 48000483
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks
Type 304 electro-polished stainless steel. Drilled and countersunk for #8 screws (sold separately). Open: 2 3/4" x 1 5/8" .
Part No: H23-0157-1W
|
|
|
|
Home -> Engine Systems -> Engine Parts
**RepairKit-WaterPump|**RepairKit-WaterPump.
Part No: 18-3387
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Bronze Flush Head Threaded Thru-Hull Fittings
Bronze Flush Head Threaded Thru-Hull Fittings.
Part No: 0331DP6PLB
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Stainless Blind Rivets - Bulk Packs
Type 18-8 stainless steel.
Part No: 4906A
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Silicon Bronze Wood Screws - Slotted Flat Head - Bulk Packs
Silicon Bronze - the generic term used for various types of copper-silicon alloys. The properties of the alloy; a high percentage of copper, and small amounts of silicon, manganese or aluminum added for strength.
Part No: 2087
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Gasket-InnerExhaust Cvr|**Gasket-InnerExhaust Cvr.
Part No: 18-0927
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains
**Hose-Power Trim|**Hose-Power Trim.
Part No: 18-2127
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Tune Up Parts
**Piston Kit|**Piston Kit.
Part No: 18-40190
|
|
|
|
Home -> Electronics -> Fishfinders->50/200kHz Dual Frequency Transducers
A good choice for offshore fishing, these dual beam transducers offer better detail on the high frequency setting and deeper readings on the low frequency.
Part No: 010-10716-00
|
|
|
|
Home -> Engine Systems -> Engine Instruments -> Engine Instr. Components
Hourmeter, 10,000 hrs 12-32 vDC Style: Professional Red. Size: 2". Weight: .
Part No: 14613
|
|
|
|
Home -> Engine Systems -> Engine Instruments
Hourmeter, 10,000 hrs 12-32 vDC Style: Dress White. Size: 2". Weight: .
Part No: 13121
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Bronze Mushroom Head Threaded Thru-Hull Fittings
Bronze fitting recommended for connections below the waterline Includes nut Marine UL listed (except 1/2" & 3/4").
Part No: 65-BN7-53
|
|
|