Top Sellers
Replaces OMC P/N 378444 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
For Chrysler/Force, 89-817109A2 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
10 Micron Replacement Filter Element for OMC 502905 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. Today’s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage.
|
Water Circulating Pump - #18-3581 - Chrysler Inbd # 3004886, 3619542, 3619859, 3745985 from SIERRA
Water Pumps The water pump is the heart of your inboard or I/O cooling system. All Sierra pumps are bidirectional and can be installed on reverse rotation engines. The pumps are also powder coated for additional protection. Includes mounting gasket. Pumps include brass bi-directional impellers, brass plugs and fittings, carbon resin seal, all mounting gaskets, stainless steel seal cup and spring, stainless steel back plate (where required), and powder coating for maximum corrosion protection.
|
10 Micron Replacement Filter Element for Mercury 35-807172/35/35-802893Q, Yamaha ABB-FUELF-IL-TR (Short) from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. Today’s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage.
|
Johnson/Evinrude Outboard Starter, 120 to 140hp V4 (1985-99), 10 tooth drive gear from SIERRA
Sierra's new and remanufactured starters are the only marine starters that meet Marine UL standards. Sierra's remanufactured starters all have new solenoids, drives, bushings, brushes and springs. The bodies are powder coated for greater corrosion resistance. Sierra has entered an agreement with United Technologies to market their complete line of outboard starters and components. All are 100% load tested . Our remanufactured starters are covered by Sierra's customer satisfaction warranty .
|
Aqua View Element Only, Mercury Replacement Element, Replaces Racor S3213 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. Today’s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage.
|
30GPH Cartridge, Replaces Racor S3240 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
|
Sierra-Tube-Exhaust from SIERRA
Some larger V-8 engines that create a large amount of back pressure use exhaust tubes rather than bellows. This helps to relieve the excessive pressure and eliminate problems with premature bellows failure. In the past, the exhaust bellows would blow up like a balloon and cause the drive shaft bellows to rub against the yoke and U-joints causing holes in the bellows.
|
|
|
|
|
Prop Nut Kit, Yamaha 40-50HP from SIERRA
An excellent emergency item to carry in your toolbox, for those occasions when the prop nut is misplaced or lost.
|
Prop Nut Kit, Yamaha V4/V6 from SIERRA
An excellent emergency item to carry in your toolbox, for those occasions when the prop nut is misplaced or lost.
|
Exhaust Flapper Valve - 4" from SIERRA
Heavy duty rubber flapper valve keeps following seas from entering exhaust outlet when moving slowly or stopping.
|
|
|
|
from PERKO, Cobra from SIERRA, Tool from SIERRA, 17' from TELEFLEX
|
|
Home -> Engine Systems -> Propellers & Drive Trains
For 100-245 Stringer Unit (1968-72) Replaces 981799 Contains: One (1) Upper Gearcase Gasket (18-0939) - OE #315189. Four (4) Oil Seals (18-2073) - OE #981268. One (1) Rubber Seal (18-3111) - OE #907774. Two (2) Washers (18-4248) - OE #311598. Four (4) O-Rings (18-7103) - OE #308624. One (1) O-ring (18-7107) - OE #313175. One (1) O-Ring (18-7121) - OE #308621. One (1) O-Ring (18-7134) - OE #303059. One (1) O-Ring (18-7146) - OE #554545. Two (2) O-Rings (18-7198) - OE #308626.
Part No: 18-2666
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Tool-Sleeve Removal|**Tool-Sleeve Removal.
Part No: 18-9871
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Primers, Undercoats & Non-Skid->Griptex Non-Skid - (Professional Application Only)
Use on smooth decks, gelcoat decks with non-skid patterns and previously painted non-skid areas.
Part No: O73013/1QTAL
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers -> Cam and Clam Cleats->PXR Camcleats
PXR—the cleat you tune for the way you race Designed for precision control, these cleats feature an adjustable release spring that allows you to control how easy the camcleat is to release—an industry first. The incorporated three-stage release spring can be pre-set for the prevailing conditions and application. Harder settings for halyards and occasionally adjusted lines. While sailing, the roller action of the PXR keeps the release effort easy, even as the wind strength increases.
Part No: PXR0810
|
|
|
|
Home -> Sailboat -> Rigging Products->Turnbuckle, Toggle/Swage
Lengths are measured from bottom of swage hole to pin center.
Part No: TS061212
|
|
|
|
An economical solution for high amperage loads where dependability is required in marine environments. Waterproof and ignition-protected (conforming to SAE J1171) so these circuit breakers are safe for installation aboard gasoline-powered boats. Ideal for branch circuits, windlasses, inverters and watermakers. False-trip free—designed to trip when subjected to a fault current. Available in panel and surface mounts. Interrupt Rating: 3000A at 12V DC. Voltage Compatibility: 42V DC.
Part No: 7109
|
|
|
|
Home -> Cabin & Galley -> Containers & Storage
Tournament Series™ Cockpit Organizer Fabricated from polished 304 grade stainless steel. . Great for fishing gear, binoculars and other personal items. Stainless mounting hardware included. Packed in clear sealed clamshell with four color graphics and mounting instructions. Size: 12. 5”L x 4. 5”W x 4.
Part No: 2213-0
|
|
|
|
Home -> Engine Systems -> Engine Parts->Sierra Solenoids
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
Part No: 18-6287
|
|
|
|
Home -> Sailboat -> Rigging Products->Hi-MOD Compression Studs
These slim Hi-MOD compression fittings are at least as strong as the rated breaking load of the rigging wire, and they work equally well with right/left hand lay wire. " The shallow angled cone establishes direct mechanical grip on the wire's core and all the outer strands. Constructed from 316 stainless steel, with aluminum/bronze crown rings, they can be taken apart for maintenance and re-used without the need for new parts (provided that no overloading has occurred).
Part No: 38CTS14
|
|
|
|
Home -> Electronics -> Global Positioning Systems->Fixed Mount GPS Accessories
.
Part No: 010-10275-00
|
|
|
|
Home -> Cordage -> Rigging Products->Splice Lines Lifeline Fittings
Popular Johnson lifeline fittings are now available with eye ends for today's high-tech low stretch line. Recommended for use with 1/4" Amsteel or similar single braid, which weighs one seventh as much as 1/4" 1x19 cable and costs about the same amount. Johnson advises replacing the line at three year intervals. . Professional splicing recommended.
Part No: LS-4200
|
|
|
|
Home -> Cordage -> Rigging Products->Extra Long Stud Terminals
Norseman Swageless Stud Terminals provide a completely secure end fitting on conventionally constructed strand, Dyform strand or 7-strand wire. They can be rigged at sea in minutes without special tools and can be inspected simply by unscrewing the assembly. The standard terminal can be used on 1x19 strand, 1x19 Dyform and 7-strand rope, using the appropriate cones. 316 stainless steel. Stud end to wire end. Terminals are reusable, but they must have a new cone.
Part No: N030L-0612
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting -> Navigation Lights->Removable Bi-Color Utility Lights
These 12" plug-in bi-color pole lights feature a deck illuminating built-in utility light that's controlled by a switch located on the light's top cover. Model 8582520 and 8582504 are USCG certified for use on power or sail boats under 12m (39. 4') in length. Model 8582512 is certified for powerboats only under 20m (65. Bases sold separately (next page). Model 8582512 uses a 3 contact, 5° angle base. Model 8582520 uses a 3 contact, 0° base. Model 8582504 uses a 2 contact, 0° base.
Part No: 1212DP2CHR
|
|
|
|
Keep your outboard looking good and protect it against the tough marine environment. Our motor hoods have been redesigned to better fit newer cowl sizes and later model engines.
Part No: 926117ON
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Bronze 90º Street Ells
Bronze 90º Street Ells.
Part No: 479618
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting
This solidly built ''ship-style'' light can be used on deck, in bilges, passages, work areas, or even in your shower! Uses household-type 12V DC, 32V DC, or 110V AC lamps up to 25W (not included). Made of corrosion-proof plastic. Heavy glass fresnel lens is O-ring sealed and. Protected by a high-impact plastic cage. Not for explosive, fumed areas.
Part No: 458-S
|
|
|
|
Home -> Engine Systems -> Engine Parts
All the parts you need to do the job right. Components are manufactured from premium materials to stringent quality standards. Kits contain: water tube. impeller. housing. water pump gasket. grommet. drain gasket. water pump base to gear housing gasket. water pump gasket. seal ring.
Part No: 18-3310
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->Marine AC 80 - Pure Epoxy, (Commercial/Industrial Only)
Marine AC 80 - Pure Epoxy - Commercial/Industrial Only A surface tolerant, two part 80% solids pure epoxy anticorrosive primer. Epoxy anticorrosive coating for use on the entire vessel: Underwater, topside, deck, house, water ballast tank, cofferdam, voids, cargo holds and internal spaces. High solids epoxy. Specifically designed for Steel and for (select styles) aluminum ships.
Part No: 8001K
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Snap Shackles->Forged Snap Shackles
Highest quality drop-forged 17-4 PH stainless-steel shackles are beautifully polished, with smooth contours. Great strength and reliability.
Part No: 2473
|
|
|
|
Home -> Seating & Covers -> Carpet, Vinyl & Canvas->Seaquest Vinyl Fabric - Flat Or Pleated
Designed specifically for all types of marine and outdoor applications, Seaquest vinyl is available plain (flat), or pleated with 1 1/2 inch pleats and embossed stitching. Polyester filled channels add depth to pleats. Width: 54 inches Weight: 32oz.
Part No: SQ4
|
|
|
|
Home -> Engine Systems -> Trim Tabs & Hydrofoils -> Power Tilt/Trim->Tilt/Trim Hoses
High-pressure hoses, cylinder to connector. Sierra trim hoses include marine-grade stainless-steel fittings and tubing, precision made for an exact fit. Working pressure up to 3000 PSI.
Part No: 18-2111
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Bronze Mushroom Head Barbed Thru-Hull Fittings
Includes nut For use with hose Not for use below the waterline per ABYC.
Part No: 65-BN7-02
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks
High-security lock offers superior corrosion resistance for the marine environment.
Part No: 89511
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting->Tungsten Halogen Floodlights & Replacement Bulbs
Unique trapezoidal light beam provides excellent and even floodlight coverage. Tungsten halogen 50W bulbs produce 9,900cp. The totally weatherproof housing is high-impact polypropylene with stainless steel fittings. Mounting bracket included. Average bulb life: 450 hours. Draw: 4A@12V DC.
Part No: 45903-0002
|
|
|
|
An economical solution for high amperage loads where dependability is required in marine environments. Waterproof and ignition-protected (conforming to SAE J1171) so these circuit breakers are safe for installation aboard gasoline-powered boats. Ideal for branch circuits, windlasses, inverters and watermakers. False-trip free—designed to trip when subjected to a fault current. Available in panel and surface mounts. Interrupt Rating: 3000A at 12V DC. Voltage Compatibility: 42V DC.
Part No: 7002
|
|
|
|
Home -> Watersports -> Skindiving Gear -> Skindiving Gear->Anacapa LX Mask, Snorkel & Fins Combo
One-window mask has a one-size-fits-all face skirt that fits a wide range of faces. Silicone face skirt provides optimum comfort. Snorkel has a contoured shape and pre-bent flex section to improve comfort. Fins are easy to use and comfortable. Nature’s Wing patented split-blade technology reduces drag and increases lift and propulsion. Adjustable foot strap to fine-tune fit. Set includes Anacapa 1 LX mask. Sonora II snorkel .
Part No: 277400
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories -> Outlets & Plugs->Watertight Deck Connections
Polarized double contacts rated for 15A@12, 24 and 32V.
Part No: 1189DP0CHR
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Additives & Fiberglass->Episize™ Unidirectional Carbon Tape
Episize™ Unidirectional Carbon Tapes Carbon fiber unidirectional reinforcing tapes are used to improve tensile and compressive strength and stiffness in one direction while adding minimum thickness and weight. Fiber bundles are held in place by a polyester fill thread for easy handling and wet out. . 015" thickness. #702 (144k fibers/inch width) 11/2" wide x 12' or 50' rolls.
Part No: 702-12
|
|
|
|
Home -> Engine Systems -> Control Systems -> Control Cables->33C Red Jacket™ Control Cables
The most widely used cable type in the world. 8" minimum bend radius. Cable adapter kits available for use with Mercury, MerCruiser, Johnson/ Evinrude, and OMC sterndrive. 3" travel.
Part No: CC33217
|
|
|
|
Home -> Seating & Covers -> Carpet, Vinyl & Canvas->Seaquest Vinyl Fabric - Flat Or Pleated
Designed specifically for all types of marine and outdoor applications, Seaquest vinyl is available plain (flat), or pleated with 1 1/2 inch pleats and embossed stitching. Polyester filled channels add depth to pleats. Width: 54 inches Weight: 32oz.
Part No: SQ18
|
|
|