Top Sellers
Furler Kit for Boat Length to 16', 500lb. SWL, 1/8" Max. Wire dia., 1/4" Pin dia., 2-1/2" Pin-to-Pin, 5/32" Furling Line dia. from HARKEN
Furl or set your jib from your cockpit Harken small boat furlers allow the sail to be set and furled from the cockpit, a critical convenience in many racing dinghies and trailerable sailboats. Constructed of Hardkote anodized Teflon-impregnated aluminum, they feature multiple stacked races of Delrin or Torlon ball bearings for smooth rotation under load. The jib’s luff wire must be properly seized to the sail, since it carries most of the headstay load. 434 furler for dinghies under 16ft. (4.
|
RigTune Pro Digital Rig Tension Gauge from HARKEN
Old-fashioned spring gauges, like the Loos Pro, don’t provide repeatable numbers. This product does. Unlike spring-loaded gauges, the Harken Rigtune Pro measures rig tension to the nearest kilogram. A load cell records the pressure on one of the pins and the measurement is displayed on a simple, easy-to-read screen. The Rigtune Pro fits a specific range of rigging sizes, 2. As rigging is deflected over three pins on the back of the gauge, a load cell records the pressure on one of the pins.
|
Flat Cam Riser, 1"H from HARKEN
Harken Cam-Matic cleats are legendary for smooth operation when holding and releasing control lines. Three rows of Delrin ball bearings allow the jaws to open and close smoothly under the highest loads. Light springs allow the cleats to open freely, so the teeth do not have to be sharp which means that your line lasts longer. Use models with aluminum jaws for high loads, or when the line will be drawn through the teeth for adjustment.
|
Replacement Ball Bearings for 150 Cam Cleat from HARKEN
Harken Cam-Matic cleats are legendary for smooth operation when holding and releasing control lines. Three rows of Delrin ball bearings allow the jaws to open and close smoothly under the highest loads. Light springs allow the cleats to open freely, so the teeth do not have to be sharp which means that your line lasts longer. Use models with aluminum jaws for high loads, or when the line will be drawn through the teeth for adjustment.
|
Spinnaker Pole Car, Track #2720, 900sq.ft. Max. Sail Area, 1125lb. SWL from HARKEN
Now with captive ball bearings, which eliminates the need for a ball-bearing loader during installation or removal from track. These cars run freely, fit low-beam traveler track and are easy to adjust under any load.
|
Hi-Load Ti-Lite Car, Torlon Bearings, 850lb. SWL from HARKEN
These lightweight, solid aluminum and compact captive ball (CB) travelers are built to handle very high loads. Captive ball bearings let you roll the cars on and off the track without using a ball loader. Boat Size: Dinghies, multihulls, to small offshore boats. Material: One-piece solid aluminum . Shackle: Pivoting toggle models—fasten control blocks directly to post without needing a shackle. Sheave: Fixed sheave models—mainsheet loads 40° or less from vertical.
|
57mm Black Magic AirBlock, High-Load Strap Head with Becket, 2,500lb. SWL, 3.6oz. from HARKEN
Strong, lightweight aluminum blocks for offshore boats Used for sheets, halyards, running backstays and control lines on offshore boats, these strong, lightweight blocks are made of sculpted aluminum with Torlon rollers and carbon black balls for strength and UV protection. Cheek Material/Finish: 6160-T6 Hardkote anodized aluminum . Sheave Size: 57mm (2-1/4") . Construction: Three fasteners for quick disassembly. Plastic isolators separate dissimilar metals. Three-way head system.
|
29mm Carbo Clew Block Assembly from HARKEN
From the folks who invented ball bearing blocks, this line of blocks boasts an excellent strength-to-weight ratio. 29mm doubles and triples feature a U-lock to hold the swivel in the front or side position, or allow it to spin freely. Use the 40mm blocks for jib and mainsheet systems on high-performance dinghies, and for high-load control lines on small keelboats. The 57mm blocks have an enormous working range that makes them ideal for main and jib sheets, spinnaker halyards and control lines.
|
Winch Service Kit from HARKEN
Contains 10 pawls and 10 springs.
|
|
|
|
|
Midrange Four-Hole Eyestrap from HARKEN
Forged eyestraps are extremely strong and their smooth shape won’t chafe line. Stainless steel . 6000lb. Breaking load.
|
Cabin Hatch/Vent from LEWMAR
Designed to fit Lewmar hatches or to be mounted on deck, this vent features a built-in gasketed bung that makes it 100% watertight. The trim piece is available for thru-deck installations. Includes mounting screws. Type: Passive vent . Material: Acrylic composite . Dimensions: 2-1/4"H x 6-3/4" Dia. . Cutout Size: 3" .
|
Hatch Riser Arm for 20" x 20" Hatch from TAYLOR
Replacement arms for Taylor hatches from 1987 to the present. Universal arms can be left or right.
|
Screen Kit Hinge from LEWMAR
Allows the aluminum framed screen included with Lewmar Trim and Screen Kits to be hinged for easier access to the hatch.
|
|
from HARKEN, from LEWMAR, SWL from HARKEN, Navy from TAYLOR
|
|
Home -> Anchor & Docking -> Fenders & Docking->Survivor Center Rope Tube Style Fenders
Survivor® fenders provide a new level of protection for your boat. Lab-tested for durability and performance, these fenders feature an innovative reinforced design and heavy-duty construction so they absorb collision better and last longer than standard fenders. In addition, with our exclusive built-in Micro Pump,™ these fenders have the advantage of being able to be inflated anytime, anywhere, without removing the fender or having to use additional pumps, needles or adapters.
Part No: 854026
|
|
|
|
Home -> Fishing -> Fishing Accessories
TACO’s Deluxe Pontoon Boat Tackle Rack offers secure & convenient, on-board 2-, 3- or 4-rod storage. Made from U. V. stabilized high density polyethylene and features stainless steel fasteners that resist rust and corrosion. The compact design is big enough to hold spinning & conventional tackle.
Part No: P03-074W
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Survivor Series Fenders
.
Part No: 857026
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers->Surf Board Carriers
Boardlocker Killer waves 50 miles up the coast? No problem. Just secure your board on top of your car with these carriers and go! The Boardlocker fits virtually any rack and includes a floating strap system for easy loading. Rubber-coated stainless-steel cable strap. Universal Crane Board Carrier The Crane Board Carrier uses a floating strap system that keeps the buckles elevated for easy loading. Heavy-duty polyester straps. Use with a Board Pad if boards are not in a protective padded bag.
Part No: INA745
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->2.25" Blocks
The original Harken block Used for main and jib sheets on course racing keelboats, scows and dinghies with large mains. Often used for spinnaker halyards and sheets on small offshore boats. Swivel blocks feature a three-way head system with a set screw. Blocks with cams feature adjustable cam arms and reversible cam cleats. Where applicable, blocks use #8 fasteners. Sheave: Delrin. Bearings: Delrin ball bearings. Sheave Size: 2-1/4" (57mm). Line Diameter: 7/16" max.
Part No: 206
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->Eye Bolts - Bulk Packs
Type 18-8 stainless steel.
Part No: 4811B
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Big Boat Car Controls
For use on offshore boats from 32’–65’. Torlon® bearings and pivoting shackles for non-vertical loads.
Part No: 1896
|
|
|
|
Home -> Sailboat -> Tiller & Rudder -> Tillers Extensions & Ac->Tiller Extensions
It allows sailors to helm from an optimum position in the boat, greatly improving boat handling and speed. In light air, this extension lets sailors move their weight forward to reduce wetted surface and minimize drag. In heavy air it allows sailors to hike farther out on the rail and flatten the boat while steering. A flexible rubber universal joint allows sailors to hold the extension from any direction for precise steering control. Rope core for safety. Fastener Spacing: 1-1/4".
Part No: 7100.42
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Cotter Pins - Bulk Packs
Type 18-8 stainless steel.
Part No: 1223B
|
|
|
|
Home -> Sailboat -> Blocks->40mm Carbo AirBlocks®
From the folks who invented ball bearing blocks, this line of blocks boasts an excellent strength-to-weight ratio. 29mm doubles and triples feature a U-lock to hold the swivel in the front or side position, or allow it to spin freely. Use the 40mm blocks for jib and mainsheet systems on high-performance dinghies, and for high-load control lines on small keelboats. The 57mm blocks have an enormous working range that makes them ideal for main and jib sheets, spinnaker halyards and control lines.
Part No: 2643
|
|
|
|
|
3-Year From 250 To 299. 99|3-Year From 250 To 299.
Part No: 2 EX 250-299.99
|
|
|
|
Home -> Sailboat -> Downwind Poles & Cars -> Pole End Fittings & Tub->Deck Mount Pole Chocks
Constructed of marelon, these chocks withstand rugged use and offer a “snag-proof” profile on deck.
Part No: 300002
|
|
|
|
|
2-Year DOP From 400 To 499. 99|2-Year DOP From 400 To 499.
Part No: 1YR DOP 400-499
|
|
|
|
Home -> Sailboat -> Tiller & Rudder -> Rudder & Wheel Hdwr->Rudder Fittings
Sea Sure rudder fittings are precision-machined, tough, reliable and lightweight. Both pintles and gudgeons are manufactured from a heat-treated corrosion-resistant aluminum alloy with black anodized finish for complete protection. Precision machining and optional low-friction carbon bushes eliminate undesirable play in the rudder system. Pintles are cross-pinned for added rigidity and absolute security.
Part No: 18.45B
|
|
|
|
Home -> Sailboat -> Headsail Furling -> Furling Accessories->Twin Groove Carbo Racing Foil Kits
For use with all Harken furling units.
Part No: 7006
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Bulk Pak Brass Cup Hooks
Bulk Paks are larger quantities of fasteners in disposable plastic packages. These cup hooks are beautiful polished brass.
Part No: 2825
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Bruce-Type Anchors->Manson Ray Anchors
Practical Sailor Best Choice among Heavyweight Anchors Anchors for the biggest, finest boats Designed for larger boats, Ray anchors are Lloyd’s certified as high-holding power anchors and are forged, not cast, for consistent quality of steel and measurements. Ray anchors are trusted to secure some of most famous ships including the world’s largest sloop, the Mirabella V. ) Pros: High holding (Lloyd's-certified) for larger boats to megayachts and ships. Forged—not cast—for quality; sets quickly.
Part No: SSRAY400
|
|
|
|
Home -> Anchor & Docking -> Windlasses & Rollers
For Lewmar Pro-Series Windlass wireless remote operation.
Part No: 68000593
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Premium Pivoting Fluke Anchors->Kedge Anchors
This Lloyd’s certified, high-holding power anchor is ideal for larger craft and features special flukes and tips that deliver exceptional holding power in a variety of conditions. Forged, not cast, for high, consistent quality and strength. Easily stored on larger boats, the Kedge can be manufactured in larger sizes than listed here (call for a custom quote). Pros: Lloyd’s certified high holding power in all bottom types Cons: Expensive due to their large size, materials and construction.
Part No: SSD400
|
|
|
|
Home -> Sailboat -> Blocks->30mm Synchro Control Blocks
Quality Lewmar blocks in compact 30mm size Lightweight 30mm blocks feature the same advanced materials and open design of Lewmar's 40mm blocks for high performance and reduced weight. The MRT (Metal Replacement Technology) sheaves, combined with the stainless steel central race and balls, deliver the ultimate efficiency and weight advantage. Sheave: MRT Composite reinforced plastic Ball Bearings: Stainless-steel central race and balls Sheave Size: 1-1/16" (30mm) Line Dia.
Part No: 29901326
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers
For replacement of ribbed wobble rollers. Kit includes four 5" x 3" black ribbed rollers, four Delrin bushings, four 1-1/8" washers, four 3/4" washers and four retainer rings.
Part No: 29210
|
|
|
|
Home -> Engine Systems -> Fuel Tanks->Electric Fuel Gauge Sending Units
These sending units fit the industry-standard bolt-hole pattern and 240-33 Ohm gauges. Internal measurement components will not rust or corrode.
Part No: 035729-10
|
|
|
|
|
Home -> Engine Systems -> Engine Parts
**RepairKit-WaterPump|**RepairKit-WaterPump.
Part No: 18-3238
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Filters & Chemicals->Waterguard™ Inline Filters
Easy to install on your boat or RV. These inline filters will rid your water of up to 95% of chlorine and provide gallons of clean drinking water. Self-contained filters are water-washed coconut carbon, which increases efficiency and filter life. One-year warranty.
Part No: RV-210GH-A
|
|
|
|
Home -> Cordage -> Anchor Line & Dock Line -> Chafe Gear and Snubbers->SHOCKLES
Eliminate shock on your boat in dozens of different situations with these extra rugged shock absorbers. Use a SHOCKLES to keep a strong, constant pressure on whatever you attach it to. Features a tough, U. S. made, marine-grade elastomer core that’s covered with 100% nylon webbing (rated to 3,500lb) for complete sun and abrasion resistance. Anodized aluminum marine-grade carabiners at both ends have stainless-steel gate pins and are rated for 5,000lb. Available in two lengths and two forces.
Part No: 0011
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyestraps, Fairleads, Bails->Light-Duty Block Hangers
Forged stainless-steel construction.
Part No: 90-10
|
|
|
|
Home -> Fishing -> Fishing Accessories
A quality scale with corrosion-resistant brass body and easy-to read increments. Should be in every tackle box. Useful for setting reel drags or weighing the Big One. The 8-1/2 body and cylindrical shape allow easy storage in a tackle box or tackle drawer on your boat.
Part No: 2012
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Tune Up Parts->Ignition Tune-Up Kits
Complete kits include cap and rotor, contacts and condenser if required. Tune-up kits have everything that the complete kits have, except for the cap.
Part No: 18-5277
|
|
|
|
Home -> Plumbing -> General Purpose Pumps->Dual Head Pump Service Kits
Dual Head Pump Service Kits for Models 7013378 and 7013386.
Part No: 94-122-00
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Putties, Sealers, Misc->Resin Spreader - 10 Pack
Sturdy, flexible and can be cut to width desiredSturdy, flexible spreaders. 2 1/2"W Use to spread resin and remove air bubbles from fibergalss layups. Cured epoxy and polyester resin easily removes from spreader surface.
Part No: 100524
|
|
|
