Top Sellers
Replaces OMC P/N 378444 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
For Chrysler/Force, 89-817109A2 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
30GPH Cartridge, Replaces Racor S3240 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
|
10 Micron Replacement Filter Element for OMC 502905 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. Today’s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage.
|
10 Micron Replacement Filter Element for Mercury 35-807172/35/35-802893Q, Yamaha ABB-FUELF-IL-TR (Short) from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. Today’s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage.
|
Johnson/Evinrude Outboard Starter, 120 to 140hp V4 (1985-99), 10 tooth drive gear from SIERRA
Sierra's new and remanufactured starters are the only marine starters that meet Marine UL standards. Sierra's remanufactured starters all have new solenoids, drives, bushings, brushes and springs. The bodies are powder coated for greater corrosion resistance. Sierra has entered an agreement with United Technologies to market their complete line of outboard starters and components. All are 100% load tested . Our remanufactured starters are covered by Sierra's customer satisfaction warranty .
|
Aqua View Element Only, Mercury Replacement Element, Replaces Racor S3213 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. Today’s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage.
|
Water Circulating Pump - #18-3581 - Chrysler Inbd # 3004886, 3619542, 3619859, 3745985 from SIERRA
Water Pumps The water pump is the heart of your inboard or I/O cooling system. All Sierra pumps are bidirectional and can be installed on reverse rotation engines. The pumps are also powder coated for additional protection. Includes mounting gasket. Pumps include brass bi-directional impellers, brass plugs and fittings, carbon resin seal, all mounting gaskets, stainless steel seal cup and spring, stainless steel back plate (where required), and powder coating for maximum corrosion protection.
|
Exhaust Flapper Valve - 4" from SIERRA
Heavy duty rubber flapper valve keeps following seas from entering exhaust outlet when moving slowly or stopping.
|
Guzzler 500 Surface Mount Bilge Pump from GUZZLER/BOSWORTH
Guzzler 400 and 500 Bilge Pumps Capable of a 12' suction lift and a 12' delivery head. Surface-mount pumps include a fixed, horizontal handle. Thru-deck models include removable, vertical handle and thru-deck mounting plate with cover.
|
Sierra-Tube-Exhaust from SIERRA
Some larger V-8 engines that create a large amount of back pressure use exhaust tubes rather than bellows. This helps to relieve the excessive pressure and eliminate problems with premature bellows failure. In the past, the exhaust bellows would blow up like a balloon and cause the drive shaft bellows to rub against the yoke and U-joints causing holes in the bellows.
|
|
|
|
|
Prop Nut Kit, Yamaha 40-50HP from SIERRA
An excellent emergency item to carry in your toolbox, for those occasions when the prop nut is misplaced or lost.
|
Prop Nut Kit, Yamaha V4/V6 from SIERRA
An excellent emergency item to carry in your toolbox, for those occasions when the prop nut is misplaced or lost.
|
|
4" from GUZZLER, Bearing from SIERRA, Carbkit from SIERRA
|
|
Home -> Sailboat -> Tiller & Rudder -> Tillers Extensions & Ac->Fastac Tiller Extensions
All black 5/8" (16mm) aluminum tubes with smart black Omniflex end fittings. Omniflex is a universal joint of opaque elastomeric polymer with a fiber core.
Part No: R0835
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports->Breeze-Booster Hatch Ventilating System
Catch the breeze! Funnel the slightest breeze into your boat. Self-supporting system is simple to install in just two steps on power or sail boats and is an efficient way to ventilate your cabin through hatches and portlights. Made of durable ripstop nylon and fiberglass bows with all parts assembled.
Part No: MED-SC
|
|
|
|
Home -> Ventilation -> Vents -> Exterior Vents->Flexible PVC Cowl
These vents are a great way to supplement solar or 12V ventilating systems, and they are commonly used as bilge ventilators with or without a powered blower. The soft, flexible PVC is safer than metal or other types of rigid vents because it deforms if accidentally stepped on, then springs back to shape. Includes Cycolac deck ring and cap. The Deluxe Low Profile vent has a stylish red interior. Included Equipment: Cycolac deck ring & cap . Installation Hardware Required: #8 fasteners .
Part No: N10863
|
|
|
|
Home -> Shoes & Boots -> Waterproof Boots->Neo-Trek Uninsulated Knee Boot
Neo-Trek is a combination of scent free, 100% waterproof rubber exterior laminated to a 3mm or 5mm neoprene inner layer. This results in an incredibly comfortable, form fitting lightweight boot Side or rear cinch straps with cam lock buckles . Removable molded EVA insoles for added comfort . Heel "kick-off" lugs for easy on/off . Expanded rubber outsoles .
Part No: BROWN-11
|
|
|
|
Home -> Foul Weather Gear & Jackets -> Foul Weather Gear -> Foul Weather Gear->Acadia Two-Piece Rain Suit
Affordable PVC rain suit with internal adjustable waist, Velcro®-adjustable sleeves and snap-adjustable pant cuffs is designed for a comfortable fit. Use on the boat for fishing, for protection against light rain or spray, as a spare set for on-board guests, or even as lightweight wet-weather gear ashore. Pants have an elasticized waist and convenient rear storage pocket. 20mm PVC-coated nylon . Category: Fishing/PVC. Best Use: Rain or spray protection, guests. Key Feature: Economical gear.
Part No: YELLOW-2X
|
|
|
|
Home -> Cordage -> Anchor Line & Dock Line -> Chafe Gear and Snubbers->Removable Chafing Gear
Protect your docklines from chafe and extend their life with attractive ballistic nylon sleeves featuring easy Velcro™ installation/removal. Ends include 1/8"dia. nylon cords that attach to line to prevent slip. Finished edges create an aesthetically pleasing, uniform look.
Part No: CG1025-3FT
|
|
|
|
Home -> Engine Systems -> Engine Parts
**SealKit-Lower Unit|**SealKit-Lower Unit.
Part No: 18-2633
|
|
|
|
Home -> Electrical -> Batteries & Accessories -> Battery Switches & Cable->350A Compact Battery Switches
Rated the top standard-duty switch by Powerboat Reports* Rated 350A continuous/600A Intermittent/2000A cranking with the new Engine Starting Standard. Tin-plated copper terminals are 3/8" for better conductivity. Tactile indicators for safe operation in low light. Surface mount with four 1/4" fasteners on 3" centers or flush mount in a 3 5/8" hole. Max Momentary Rating: 2000A . Switch Material: Lexan Polycarbonate . Terminal Material/Size: Tin-plated Copper; 3/8" .
Part No: 9002E
|
|
|
|
Home -> Anchor & Docking -> Anchor Line & Dock Line -> Dock Line->Prespliced Double Braid Nylon Dock Line
Give your boat a sharp, well-kept look! This is the strongest and easiest-to-handle line you can buy that stays flexible throughout its service life. The core and cover is constructed from the highest quality treated nylon. Our Double Braid line offers controlled elongation and excellent abrasion resistance. Double braid lines stretch slightly less but are stronger than three-strand lines. Each line has a professionally spliced 12" eye with a heat-sealed bitter end. High elongation.
Part No: 4069-20-00035
|
|
|
|
Home -> Shoes & Boots -> Waterproof Boots->Neo-Trek Uninsulated Knee Boot
Neo-Trek is a combination of scent free, 100% waterproof rubber exterior laminated to a 3mm or 5mm neoprene inner layer. This results in an incredibly comfortable, form fitting lightweight boot Side or rear cinch straps with cam lock buckles . Removable molded EVA insoles for added comfort . Heel "kick-off" lugs for easy on/off . Expanded rubber outsoles .
Part No: BROWN-9
|
|
|
|
Home -> Plumbing -> Fittings & Valves -> Valves, Deck Fills, Misc.->Sea-Lect Diverter Valves
Simple and compact, with full-port openings that won’t restrict flow. Epoxy-coated aluminum handles and Delrin bodies.
Part No: Y-94-12BA
|
|
|
|
Home -> Foul Weather Gear & Jackets -> Foul Weather Gear -> Foul Weather Gear->Acadia Two-Piece Rain Suit
Affordable PVC rain suit with internal adjustable waist, Velcro®-adjustable sleeves and snap-adjustable pant cuffs is designed for a comfortable fit. Use on the boat for fishing, for protection against light rain or spray, as a spare set for on-board guests, or even as lightweight wet-weather gear ashore. Pants have an elasticized waist and convenient rear storage pocket. 20mm PVC-coated nylon . Category: Fishing/PVC. Best Use: Rain or spray protection, guests. Key Feature: Economical gear.
Part No: YELLOW-M
|
|
|
|
Home -> Engine Systems -> Trim Tabs & Hydrofoils
The transom on some pontoon boats are inset with an aluminum lip along the sides. To conveniently mount the PT-130 to this type transom, this transom spacer is available.
Part No: 13032
|
|
|
|
Home -> Engine Systems -> Engine Parts->Impeller Repair Kits for Outboards
.
Part No: 18-3317
|
|
|
|
Home -> Engine Systems -> Engine Parts->I/O & Inboard Ignition Coil - 185434 Uses external resistor, for many IBM applications. Replaces Volvo P/N 835998-6, Pleasurecraft P/N R117001, Crusader P/N 41080.
Replaces Volvo 835998-6, Pleasurecraft R117001, Crusader 41080.
Part No: 18-5434
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring->Mast Buoys
Just lean over and grab your mooring without a boat hook! Makes your mooring easier to find, and prevents it from being run over by other boats. Tough fiberglass pole, vinyl coated metal weight, and sealed PVC white float for maximum buoyancy. Bright band for high visibility Made in U. S. A.
Part No: 22126
|
|
|
|
Home -> Navigation -> Compasses & Navigation Tools -> Surface Mount Compasses->Globemaster SP-5C Binnacle-Mount Compass Accessories
Accessories for Globemaster compass models SP-5B and SP-5C.
Part No: GM-5-C
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
**Elbow-Fuel (5)|**Elbow-Fuel (5).
Part No: 18-8110-9
|
|
|
|
Home -> Foul Weather Gear & Jackets -> Foul Weather Gear -> Foul Weather Gear->Acadia Two-Piece Rain Suit
Affordable PVC rain suit with internal adjustable waist, Velcro®-adjustable sleeves and snap-adjustable pant cuffs is designed for a comfortable fit. Use on the boat for fishing, for protection against light rain or spray, as a spare set for on-board guests, or even as lightweight wet-weather gear ashore. Pants have an elasticized waist and convenient rear storage pocket. 20mm PVC-coated nylon . Category: Fishing/PVC. Best Use: Rain or spray protection, guests. Key Feature: Economical gear.
Part No: YELLOW-S
|
|
|
|
Home -> Engine Systems -> Engine Parts
**CarburetorKit|**CarburetorKit.
Part No: 18-7091
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers -> Wheels & Tires->Trailer Tires & Wheels
Boat and camper tires take a real pounding on the road and long periods of storage can cause deterioration. These affordable replacement tires meet Department of Transportation Standards. Tires beginning with ST are special trailer tires with stiffer sidewalls to improve trailer stability and reduce sway. Select bias ply with galvanized, painted or chrome rims, spoked or solid, in a variety of sizes. For heavier loads and/or trailers used over long distances, we recommend radial tires.
Part No: 16555
|
|
|
|
Home -> Cordage -> Anchor Line & Dock Line->LineSaver Mooring Snubbers
Recently redesigned and tested to 1. 2 million cycles, these super-elastic, natural rubber snubbers absorb shock loads and extend the life of dock lines while minimizing stress to structural areas around cleats caused by the jolting action of wind, waves and wakes.
Part No: 309WM
|
|
|
|
Meets American Boat and Yacht Council (ABYC) standards UL 1077 recognized, TUV certified, CE marked for Europe and CSA certified for Canada The industry standard circuit breaker for Blue Sea Systems electrical panels Combines switching and circuit protection into a single device Used as AC Main circuit protection "Trip Free" design cannot be held "ON" during fault current condition.
Part No: 7237
|
|
|
|
Home -> Engine Systems -> Engine Lubrication->Rotella T SAE 15/40 Engine Oil
Provides significantly lower wear, exceptional deposit control and engine cleanliness for both pre-2007 engines and the latest performance and emissions systems technology found on new engines.
Part No: 550019919
|
|
|
|
Home -> Paint & Maintenance -> Caulking & Adhesives->Dolfinite Bedding Compound - Quart
Never hardens—permits easy removal of hardware and fittingsA tan-colored, heavy-bodied compound for bedding in keels, transoms, molding and deck hardware. Doesn't harden, soften, or ooze. Provides waterproof seal for every joint and fitting. Formulation: One-part bedding compound .
Part No: 2005N-QT
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Sealant-Bearing Mount 609|**Sealant-Bearing Mount 609.
Part No: 37483
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->InterProtect® 3000, Quart
Microplates® act like shingles to prevent water absorptionHigh solids, VOC compliant epoxy with Microplates®. Can be used down to 32°F. Use Interprotect® 2000E as tie coat prior to the application of antifouling paint. Total Thickness Required: 10mil dry (3-4 coats) Drying Time: To touch 1-16hrs. ; overcoating: 1 1/2hrs. - 3 months @ 32°-95°F. Coverage: Brush: 82sq. ft. /qt. , 330sq. ft.
Part No: Y3000KIT/QT
|
|
|
|
Home -> Shoes & Boots -> Waterproof Boots->Sailing Boots
U/SAILINGBOOT/S/S5.
Part No: CL63S
|
|
|
|
Home -> Engine Systems -> Engine Parts
Replaces: 89-803822T, 89-F460917-1, F460917-1, 89-817109A3 For: Early model 35-150 HP.
Part No: 18-5835
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Screw|**Screw.
Part No: 18-9894
|
|
|