Top Sellers
Braided Polyester Cord, by the Foot from NEW ENGLAND ROPES
A low-stretch cord that’s great for flag halyards, foredeck netting, or light-air spinnaker sheets. Sold by the foot. Diameter: 1/8". Best use: Utility cord, flag halyards . Construction: Braided polyester . Breaking strength: 530lb. . Stretch: 3% at 15% of breaking strength .
|
50' Braided Polyester Cord from NEW ENGLAND ROPES
A low-stretch cord that’s great for flag halyards, foredeck netting, or light-air spinnaker sheets. Length: 50'. Diameter: 1/8". Best use: Utility cord, flag halyards . Construction: Braided polyester . Breaking strength: 530lb. . Stretch: 3% at 15% of breaking strength .
|
1/8" NPT X 5/16" Brass hose barb from MOELLER
1/8 NPT X 5/16" Brass hose barbs with male threads.
|
Hose Adapter, From 1-1/8" to 3/4"-5/8" from RULE INDUSTRIES
#69 is stepped & adapts from 1-1/8" to 3/4" - 5/8" #57 is an elbow & adapts from 1-1/8" to 1" NPT #67 adapts from 1-1/2" to 1-1/8".
|
Stern Rail Outboard Motor Mount for 1" Railing from EDSON CORPORATION
Convenient cleat and side handles allow you to tie the motor and lock it safely on board. The non-corroding polished 316 stainless bracket with nonskid pad, bolted to the UV stable poly backing board always looks shipshape. no more varnishing. Comes complete with hardware to attach to any standard 1'' (2. 5cm) stainless rail. Warning: Be sure the engine is securely tied onto the backing board and the engine mounts are tightened whenever the engine is stored on Edson's Outboard Motor Mount.
|
Roller Shaft Cap Nuts Only - 1/2", Pack of 8 from C E SMITH
Roller Size Length Shaft Diameter Shafts and Nuts 4" 5 1/4" 1/2" 4" 5 1/4" 5/8" 5" 6 1/4" 1/2" 5" 6 1/4" 5/8" 8" 9 1/4" 5/8" 10" 11 1/8" 5/8" 11" 12 3/4" 1/2" 12" 13 1/2" 5/8" Shaft Only 18" 19" 5/8" Cap Nuts Only Packs of 8.
|
Brass Reducer, 1/4"NPT x 1/8" FNPT from MOELLER
Barb-Fuel 1/4Fnp x 1/8Mnpt Brs|Barb-Fuel 1/4Fnp x 1/8Mnpt Brs.
|
110V AC Automatic Bilge Pump from RULE INDUSTRIES
The 1800gph pumping capacity and extra-long 24' power cord make this pump great for boats with shore power or protecting basements from flooding during wet weather. Motor and durable housing will last for years on the boat or in the home. 5/8" garden hose adapter. gph: 1800. Draw: 1. 1A@110V AC. Built-In Switch: Yes. Material: Plastic. Dimensions: 7-3/4" x 4-3/4". Port Size: 1-1/8".
|
Glasskoter Resin Roller Cover - 9" x 3/8" Nap from CORONA
For epoxy and polyester resinPhenolic core. Woven mohair. 3/8" nap for semi-smooth or 1/8" nap for fine finishes.
|
Removable Chafe Gear Wrap, 4', for 3/4"– 7/8" Line from MEGAFEND
Protect your docklines from chafe and extend their life with attractive ballistic nylon sleeves featuring easy Velcro™ installation/removal. Ends include 1/8"dia. nylon cords that attach to line to prevent slip. Finished edges create an aesthetically pleasing, uniform look.
|
Flipper Pump from WHALE PUMPS
Easy back-and-forth action produces one-way discharge. Spout swivels. Made of nylon, aluminum and synthetic rubber. For 1/2"ID hose. Material: Nylon, aluminum, rubber . Capacity: 2gpm . Dimensions: 7-1/8"H x 6"dia. . Cutout Size: 2". Clearance: 4-1/2" .
|
|
|
CP Bronze Strap Hinge - 1.125" H x 6" W from PERKO
Chrome plated bronze. Pin Height: 1-1/8" by 6" open width. Each hinge requires six #10 fasteners.
|
#809 Notched Spreader from WEST SYSTEM
4'' x 4'' plastic spreader with 1/8'', 3/16'' and 1/4'' notches on three sides for quickly applying modified epoxy at a constant thickness.
|
1/8" Single Braid, 2300lb. Breaking Strength, Green from SAMSON ROPE
The high-strength, low-stretch equivalent to wire rope with seven times less weight! Combined with flex-fatigue and service life durability, Amsteel 12-strand Dyneema SK-75 single braid can outlast wire rope and has none of the handling and safety issues associated with wire. Stretch: 0. 70% at 20% of breaking strength. Best Use: Cascade systems, replacements for wire halyards, tapered sheets, backstays, runners, checkstays and strong ultralight rigging . Construction: 12-strand single braid .
|
|
Motor from SIERRA, 1, 8"H from LEWMAR, Kohler from WICOR, White from TAYLOR
|
|
Home -> Interior, Flags & Gifts -> Clocks, Barometers, & Lamps -> Brass Lamps, Lighting
A classic best seller, the Trawler lamp uses a circular wick to provide an extremely bright circle of light, even in large cabins aboard. (Also available in a smaller size) Hanging bail and built-in smoke bell. Polished brass with a lacquer finish. White enamel shade underside for best light reflection. Large 33. 8 oz. oil or kerosene reservoir burns 30 hours. Round wick burner.
Part No: 8201/O
|
|
|
|
Home -> Engine Systems -> Engine Parts->Cooling Pumps
Typical pump features include: proven original equipment impellers, high quality brass housings, mechanical seals, wearplates, stainless steel covers, stainless steel hardware, and hardened shafts.
Part No: G907P
|
|
|
|
Telescoping outriggers, fixed model both in black/gold and sliver/black poles are 15', four section anodized aluminum poles with color trim rings and stainless line guides. Fits Tigress or any outrigger holder with a 1 1/8" ID Tube.
Part No: 88403
|
|
|
|
Home -> Engine Systems -> Engine Parts->Exhaust Manifolds, Elbows, Risers
Sierra exhaust manifolds, risers and elbows are 100% painted where the competition sends theirs out in primer alone. When the technician buys a manifold from us, time spent watching paint dry is saved for other profit generating work. Manifolds, risers and elbows are individually packaged in Instapack, an expanding packaging foam that keeps the part from chipping and breaking during transportation Water left in manifolds over the winter months can freeze and crack requiring replacement.
Part No: 18-1954-1
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->De-Icers
Protect your vessel against the damaging effects of iceKasco De-Icers circulate subsurface water (which is warmed by geothermal heat) to the surface to melt ice and prevent its formation. This helps to protect your boat and dock from lifting damage due to "ice jacking" and the shearing and crushing damage caused by ice expansion. Many factors affect the size of the open water area. In general, the 1/2hp model keeps a 50' dia. area from freezing while the 3/4hp model keeps a 75' dia.
Part No: 2400D025
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting->Beamer Remote-Controlled Searchlights
The Beamer’s 100W halogen bulb sends a piercing light through haze and rain, illuminating buoys up to a mile away. The wireless remote can turn the light on, off, swivel it through 355°, tilt it 75° from up to 150' away. All Beamers and console controls are water-resistant, easy to install and mount in any position. Wired Remotes include a 15', 7-wire harness with 22AWG control wires attached to a console control panel. Beamer Spot/Flood with Wired Remote: 100W Spotlight with 55W floodlight.
Part No: 503A
|
|
|
|
Home -> Plumbing -> Marine Sanitation
Cover assembly w/out control.
Part No: 33-4000-S
|
|
|
|
Home -> Electronics -> Boat Instruments->Un-Cut Flush Front Grand Prix Series
9. 5" Un-Cut Flush Front. Grand Prix series outer silicone seal is complemented by an internal seal made of memory resistant urethane foam gasketing that keeps its shape and sealing ability. Polished stainless steel tamperproof fasteners.
Part No: GP2030
|
|
|
|
Home -> Paint & Maintenance -> Winterizing & Storage->-50°F Engine & Water System Antifreeze
Formulated with non-toxic, virgin Propylene Glycol (30% Blend), it is tasteless and contains no alcohol. This product is ready-to-use; do not dilute it. Provides burst protection to -50°F (-46°C) and freeze protection within a range of +12°F to +16°F (-11°C to -9°C). When testing with a refractometer or hydrometer designed for use with propylene glycol, freeze point readings on the PG scale will range from +12°F to +16°F.
Part No: 363770
|
|
|
|
Home -> Seating & Covers -> Seating
This uniquely designed, one-piece, molded ladderback chair is built to provide extra comfort to any helm station. Features a molded in grab handle and heavy-duty marine grade tufted cushions that are ideal for use in salt water environments. Ladder-Back Captain’s Chair with cushions. Positive locking swivel/slider mount with 360° rotation and forward and aft adjustment.
Part No: 40-1050PK
|
|
|
|
Home -> Fishing -> Trolling Motors->Freshwater Foot-Control Trolling Motors
Improved Digital efficiency results in longer battery life and more time on the water. MotorGuide bow mount motors include lighted turn indicators for night operation and feature solid all-metal Gator Flex 360 mounts that can take a pounding, with 360° breakaway capability and automatic hands-free reset. Its patented Gator Flex Isolator absorbs shock to protect the lower unit from run-ins with structure. It also cancels vibration in the stow position to prevent damage during rough-water runs.
Part No: 921310110
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass
Marine-Tex, the legendary high-strength repair compound designed for filling, bonding and rebuilding wood, fiberglass, ceramic, glass, metal, masonry and many plastics. Marine-Tex paste provides waterproof repairs that can be used with fiberglass tape or cloth to bridge holes and reinforce structural repairs as needed. Emergency and permanent repairs to machinery and equipment, hulls, decks, stripped fasteners, piping and tanks are all easily accomplished with the mighty repair kit.
Part No: RM304K
|
|
![Pontoon Corner Lounge, Right Side, Light Gray from B & M SEATING]( "Pontoon Corner Lounge, Right Side, Light Gray from B & M SEATING")
|
|
Home -> Seating & Covers -> Seating->Short Pontoon Corner Seats
Remove seat cushion for under seat storage Rugged, rot-resistant, molded plastic frames Measures: 25"H x 30"W x 25"D NOTE: 8 WEEK LEAD TIME WHEN ORDERING.
Part No: BM132OVT-221
|
|
|
|
|
Telescoping outriggers, fixed model both in black/gold and sliver/black poles are 15', four section anodized aluminum poles with color trim rings and stainless line guides. Fits Tigress or any outrigger holder with a 1 1/8" ID Tube.
Part No: 88404
|
|
|
|
Home -> Fishing -> Fishing Accessories
A heavy-duty downrigger for mid-sized boats Designed for heavy duty use, this unit will handle long hours and heavy weights in tough conditions. Few downriggers can match its speed, low amp draw, lifting power, ease of operation, durability and lifetime warranty. Includes swivel mount. Full automatic hands-free operation on retrieval. Use the No. 1008 stopper beads (Model 349194) to stop at any position that you set . Less than one third the battery draw than some of the competition. load.
Part No: 1101
|
|
|
|
A stationary carbon flange is held in contact against a stainless flange, which rotates with the prop shaft. The high-density carbon/graphite flange is attached to the boat by a nitrile bellows which, with the help of water pressure, produces a constant pressure between the carbon and stainless flanges. This mechanical seal is impervious to engine motion and vibration, creating a 100% watertight and maintenance-free seal.
Part No: 02-134-300
|
|
|
|
Home -> Seating & Covers -> Seating -> Helm & Fishing Seats->Ladder Back Chair
Resilient, comfortable seating for long hours at the helm. Built for durability and weather-resistance with high-impact plastic and all-stainless steel hardware for the ultimate corrosion resistance. Heavy-duty 28oz. marine grade vinyl upholstery is mildew- and UV-resistant. High-density foam cushions snap on and off for stowing. The chair is available with arms (SKU 9415183) and no arms (SKU 9415175).
Part No: BM562NP-710
|
|
|
|
Home -> Engine Systems -> Trim Tabs & Hydrofoils->Manual On-the-Water Adjustment Jack Plate
The only jack plate you can adjust from inside the boat with only one screw The only jack plate that can be adjusted from inside the boat with only one screw. Patented design has no side hardware to loosen. Just turn the adjustment screw to the desired height, tighten the locking nut, and you are ready to go. Rated for 585hp. Vertical lift of 3. Interlocking design provides strength. Anodized aluminum body, aluminum angle, bronze oil-lite bushings, precision stainless steel support rods.
Part No: 600M
|
|
|
|
Home -> Seating & Covers -> Seating
Long-lasting and solid roto molded plastic console features recessed drink holders and access door for easy installation. Matches the rest of the Premium Pontoon furniture line with top-quality marine-grade vinyl upholstery. Application: Pontoon boat seating . Frame Material: Roto molded plastic . Upholstery Material: Heavy-Duty 30oz. Marine Vinyl . Dimensions: 33"H x 27"W x 19"D .
Part No: BM984-842
|
|
|
|
Home -> Engine Systems -> Control Systems -> Engine Controls->MT-3 Controls
This sturdy control provides positive one-handed engine control. Start and warm-up are done by pulling out the hand levers in the neutral position. This disengages the clutch and allows throttle to be advanced in neutral. Returning to neutral detent reengages the clutch.
Part No: 308601
|
|
|
|
Home -> Fishing -> Rods
Dendoh Style rods are built to match the performance characteristics of Daiwa’s Dendoh Style Power Assist Reels. All come with Limited Lifetime Warranty. Powerful fiberglass blank, super strong and resilient. Aluminum reel seat and curved aluminum butt. AFTCO® roller swivel top and Fuji® aluminum oxide guides.
Part No: SA-B60XXXHF-DD
|
|
|
|
Home -> Cabin & Galley -> Appliances & Cookware
This space-saving product can be placed on top of a kitchen counter or built right into a cabinet. Equipped with a specially designed dish rack and cutlery basket, it cleans up to four, four-piece place settings. Comes with electronic controls, easy-to-fill dispensers, LED display and end-of-cycle signal. Features: Offers five wash cycles, including a germ-killing sanitizing cycle, 156°F, pre-wash, delay start and rapid cycle. Single water inlet, internal water heater. Water Consumption: 1.
Part No: DWV303DB
|
|
|
|
CHROME HYDRAULIC PEDESTAL.
Part No: 20-40211
|
|
|
|
Home -> Anchor & Docking -> Windlasses & Rollers -> Anchor Rollers & Mounts->Chain Stoppers
Works with your anchor roller to take tension off your windlass. Removable pawl flips up when not in use. Standard model handles 1/4" to 3/8" chain and is made of polished stainless steel.
Part No: 66840081
|
|
|
|
|
Home -> Engine Systems -> Trim Tabs & Hydrofoils
**Motor-Tilt/Trim|**Motor-Tilt/Trim.
Part No: 18-6767-1
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-234-6
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-234-512
|
|
|
|
Home -> Cabin & Galley -> Appliances & Cookware -> Appliances
The cleaning power of a full-sized dishwasher in half the space. Features stainless-steel interior and spray arm. Can be built-in to galley cabinetry (with optional Trim and Hose Kits) or used on a countertop with Freestanding Hose Kit (optional). Uses 3. 3 gallons of water per cycle. Features: Two temp, settings, including germ-killing 151 degrees F. Safety interlock door Color: Black Dimensions: 22-3/8"W x 17-1/8"H x 19-3/8"D Material: Corrosion-resistant painted metal case.
Part No: DWV303DB
|
|
|
|
Home -> Engine Systems -> Fuel Tanks -> Permanent Fuel Tanks
Light, strong and tested tough, these aluminum tanks are the choice of many boat manufacturers. Built to meet the rigorous standards of the US Coast Guard as well as the NMMA. RDS fuel tanks are built of 5052 aluminum alloy and tested for their ability to retain pressure and withstand motion, impact and fire. Before welding, all aluminum parts are bathed in acid to eliminate any contamination that might weaken a weld or create the potential for leakage. Add 3" to height for fittings.
Part No: 59181
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Tuff End™ Oval Fenders
Tuff End fenders are for heavy duty marine applications. Constructed from the same flexible, resilient vinyl as our Super Gard, Big B, and Hull Gard fenders, the end in each Tuff End is injection molded for extra strength and reliability. Tuff Ends are designed to perform under the most demanding conditions. Fender eyes are injection molded vinyl . Eyes are tested to 2000 psi tensile strength, the strongest in the industry!.
Part No: 1194
|
|
|
