Top Sellers
|
|
|
|
|
|
Cetol Marine Light - Quart from INTERLUX
Enhances and protects the natural beauty of interior and exterior woodSemi-transparent finish prevents weathering and repels water. just wash wood thoroughly and apply. Three coats are recommended for the first application, followed by annual touchups. Marine Light is more translucent than Marine. If a gloss finish is desired, either may be overcoated with Marine Gloss. Quart. Long-lasting adhesion and protection from UV rays and weathering. Flexible, breathable, translucent finish; Quarts.
|
Brightside Pre-Kote Primer - Gray, Quart from INTERLUX
Fills minor blemishes and sands easilyOne part primer for use with Brightside or any other one-part topside enamel. Microspheres provide high build and improved sandability. (Replaces Brightside Primer and 279 White Undercoater. ) Application: Brush, roller, airless/conventional spray . Number of Coats Recommended: One or two, depending on surface condition. Drying: Overcoating: 6 to 12 hrs. Drying Time: To touch: 1 to 3 hrs. Coverage: Brush: 112 sq. ft/qt, 450 sq. ft/gal; Spray: 87 sq.
|
Adaptor Fitting for Suzuki & Honda Lower Units from WEST MARINE
Metal threaded fitting fits MerCruiser, OMC, Evinrude, Johnson, Honda (70-90hp), Volvo, Force and Gamefisher lower units Fits standard quart plastic bottles. Flexible hose gets to hard-to-reach fill plugs.
|
Fiberglass Cleaner and Wax - Quart from SEAPOWER MARINE PROD
Cleans and waxes in one easy stepCleans, waxes, seals and protects the fiberglass surface. Contains the finest Carnauba waxes and silicones and removes surface oxidation, residue, dock marks, grease and dirt while leaving behind a durable high-gloss finish. Excellent for hand or machine use. Quart.
|
Inflatable Boat Antifouling Paint from PETTIT
Water-based, multi-season ablative antifouling paint. For hard- or soft-bottom inflatables. Cleans up with water. Black. Quart. Type: Copolymer Ablative. Recommended Usage: PVC or Hypalon; trailered boats. Biocide: CuOx 41%. Additives: No. Compatibility: With all other antifouling paints in good condition except VC-17. Number of Coats Recommended: Two.
|
3" Stove Pipe Deck Fitting from SEAFIT
This polished bronze fitting features a finned design that insulates the deck from hot stove and heater exhaust. 3" stove pipe screws into tapered bottom of adapter. Includes finishing ring, cover with O-ring seal and key. 2-7/8"H. Flange OD: 7".
|
|
|
Teak Care - Brightener, Quart from STARBRITE
Clean, brighten and protect your teak in three easy stepsBeautiful teak in three easy steps! Kit contains three pint-sized bottles, one each of Cleaner to remove stains and weathering; Brightener to highlight the natural grain and enhance color; and Oil to seal and protect wood from weather and UV damage. Individual, quart-sized bottles are also available. Cleaner chemically roots out stains, including ugly black mildew stains. Brightener restores teak's lustrous hue.
|
Teak Plugs - 3/8" from SEAFIT
Use these teak plugs to cover screw heads or fill small holes for a beautiful smooth finish to your installation. Sizes: 1/4" 5/8" 5/16" 3/8" 1/2" 1".
|
Micron CSC Antifouling Paint, Red, Quart from INTERLUX
Haul and relaunch without loss of performance The innovative copper-copolymer formula of Micron CSC provides a controlled release of antifouling biocide at the paint surface, which means that the longevity of the coating is related to the amount of paint applied. Can be applied over most paints in good condition. Micron CSC will not lose its effectiveness when hauled out of the water for extended periods of time (such as winter storage). Type: Copolymer . 2% Cuprous Oxide . Additives: None .
|
LetterU - White, 3" from HARDLINE PRODUCTS SR
Popular vinyl letters to meet USCG requirementsSelf-adhesive, 3"H vinyl, block, letters and numbers. Meet Coast Guard requirements when applied on contrasting background with proper spacing. Black or white. Sold individually or by the kit. Four of each letter and number for a total of 144 pieces in the kit. Meet USCG requirements when affixed to a contrasting background and properly spaced. Self-adhesive vinyl.
|
|
|
|
from FORESPAR, Quart from INTERLUX, Quart from PETTIT, 3" from SEAFIT
|
|
Home -> Fishing -> Rods->Tidewater Big Water Boat Rods
All the power you need to lift big fish, at a very affordable price. Solid glass full-length blanks with heavy-duty stainless-steel double-bridged guides and EVA foam handles. Anodized aluminum stunt roller tapered stripper guides on SUR models. Type: Conventional/Boat . Blank: Solid fiberglass . Reel Seat: Graphite seat with stainless steel hoods . Grip: EVA Foam . Butt: Nylon gimbal with rubber butt caps.
Part No: TW664/0F
|
|
|
|
Home -> Engine Systems -> Engine Parts->Water Pump Impeller Repair Kits
Type A: Fits Merc/Mar 4hp (1-cyl), Model 75 (7. 5hp) and Model 110/9. 8hp when the water impeller ID measures 0. 456" Type B: Fits all Mercruiser Alpha One Generation II drives with serial number OD 469859 and above Type C: Fits Merc/Mar 6/8/9. 9hp 2-cycle outboards (USA OA197112 & above, BEL 9461526 & above), 15hp 2-cycle and 9.
Part No: 89983Q1
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape -> Striping Tape->Premium Striping Tape
Premium 2mm vinyl striping tape makes it easy to add a colorful accent to your boat! Should you change your mind or simply decide to update the look of your boat, it's easy to remove this tape without the need to sand or ruin your paint or finish. Made from the same material used in quality custom boat graphics. It will not crack or peel, even in salt water. It can even be applied below the waterline. It can be bent, waved, and applied around corners. Each roll is 50' long.
Part No: 9650068
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape -> Striping Tape->Premium Striping Tape
.
Part No: 9650062
|
|
|
|
Home -> Electronics -> VHF Radios & Communications->Copper Grounding Foil
This is the “right stuff” for installing sensitive electronics like SSB and Ham radios that need a counterpoise to work as effectively as possible. Pure copper foil is 3" wide, 0. 003" thick.
Part No: GW0064
|
|
|
|
Milled Fibers (1/32" milled fiberglass) For use when epoxy must fill a void and provide extremely high strength and resistance to cracking (i. e.
Part No: 25-006
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Anchor Chocks & Accessories
Stow your anchor up off the deck, ready for instant deployment. These brackets hold fluke-style Danforth, West Marine, U. S. anchors up to 35lb. and all Fortress anchors (except those with mud palms).
|
|
|
|
Home -> Engine Systems -> Engine Parts
Kit contains contact set (OE #394-1100A3) and condenser (OE # 394-1130A1).
Part No: 18-5012
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Bottom Paint & Coatings
Recommended for use over vinylester and other blister-resistant gelcoats where sanding is forbidden, this primer eliminates the need to sand prior to application of antifouling paint. It may also be used over conventional gelcoats and as a tie-coat between two-part epoxy primers and antifouling paints. Quart. Color: Green/Silver. Drying time: To touch: 1hr. @ 70°F. ; to overcoat: 2hrs.
Part No: 1699808
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting -> Navigation Lights->Delta Series Universal Fit Pole Light
"Universal fit" allows these lights to fit all popular base angles from 0° to 20° rake. Complies with USCG and European CE regulations for use on powerboats under 20m, 65. 5'. 2-mile range. Models 6795389 and 6795397 fold in half for compact storage when not in use. Bases sold separately. Uses 2 pin bases. Case Material: Black plastic . Volts: 12V . Draw: 0. 69A .
Part No: 1470DP4CHR
|
|
|
|
Home -> Sailboat -> Downwind Poles & Cars -> Spinnaker Poles & Gear->Stanchion Mount Pole Chocks
Stop stumbling over deck-mounted poles and free up space on deck. Non-rusting molded urethane chocks mount easily on 1"dia. stanchions without drilling. You need two per pole.
Part No: 300042
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Brightside One-Part Polyurethane with Teflon
Achieve beautiful results with this easy-to-apply enamel The look of a two-part polyurethane with the application ease of a standard enamel. Teflon additives provide excellent stain and abrasion resistance. UV stabilizers ensure high gloss and color retention. Poly-Flow 4000 resin is self-leveling and provides excellent abrasion resistance and chemical resistance. May be brushed or sprayed on fiberglass, wood, aluminum or steel. At least two coats are required. For use above true waterline.
Part No: Y4259/QT
|
|
|
|
Home -> Electrical -> Shore Power -> Phone & TV Wiring
Use with 237230 inlet and 209124 & 197608 outlets With cord grip and PVC adapter Black plastic.
Part No: PH6619
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks->Treadmaster Step Pads
Maintain your footing under all conditions! Self-adhesive, diamond-patterned, nonskid pads are great for decks, steps, dinghy floors, personal watercraft, etc. They resist wear and tear, peeling, saltwater, fuels and chemicals. Pads have rounded edges and are precut to fit most common step sizes. Trim with scissors for a custom fit. Peel-and-stick installation. Sold in pairs.
Part No: JWTU200034
|
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Brightside One-Part Polyurethane with Teflon
Achieve beautiful results with this easy-to-apply enamel The look of a two-part polyurethane with the application ease of a standard enamel. Teflon additives provide excellent stain and abrasion resistance. UV stabilizers ensure high gloss and color retention. Poly-Flow 4000 resin is self-leveling and provides excellent abrasion resistance and chemical resistance. May be brushed or sprayed on fiberglass, wood, aluminum or steel. At least two coats are required. For use above true waterline.
Part No: Y4241/QT
|
|
|
|
Home -> Clothing Accessories -> Bags -> Utility & Tote Bags
A roomy daypack for school or travel Quality daypack has two large compartments for books or extra layers, and additional compartments to organize your essentials.
Part No: CBP-STD
|
|
|
|
Home -> Electronics -> Antennas, Mounts, Cable->SeaWatch 2030-G 21" Television Antenna
A sleekly designed omni-directional antenna Thanks to surface-mount technology, the 2030 is only 1 3/4" thick for the sleekest appearance possible. Its nylon antenna ferrule uses standard 1" antenna mounts. Exterior is white ABS plastic with a special UV-resistant lamination. Solid-state amplifier operates on 110V AC or 12V DC . Cable Length: 30' of RG-59 cable with gold-plated "F" connectors . Material: UV resistant plastic . Dimensions: 21"dia.
Part No: 4366
|
|
|
|
Home -> Seating & Covers -> Seating->Snap-Lock Power Pedestal Systems
Engineered to prevent unintentional detachment, components lock together yet release easily with the push of a button. Combines corrosion-resistant anodized aluminum, fixed or adjustable power pedestals with base plates and E-coated seat mounts that are dipped in black paint and electro-coated. Sturdy 1. 77"dia. system is virtually wobble-free. A - 13" Seat post. B - Adjustable drop in post, 16" - 20". C - Adjustable drop in post, 24" - 30".
Part No: SP-69773
|
|
|
|
Home -> Safety -> Flares & Signaling Devices
High visibility, rugged survival light is a powerful strobe that operates for up to eight hours using one AA battery. Floats with the light facing up, so it's visible for up to 1 mile. Waterproof to 500' and weighs only 3. 4oz. with batteries. Includes lanyard and Velcro® attachment. Light Type: Strobe . Maximum Range of Visibility: 1 mile . Battery Type: One AA Battery . Battery Life: Up to 8 hours . Dimensions: 5 12"L x 1 1/2"W .
Part No: AS-10-NY-WM
|
|
|
|
Home -> Engine Systems -> Trim Tabs & Hydrofoils -> Power Tilt/Trim->Tilt/Trim Hoses
High-pressure hoses, cylinder to connector. Sierra trim hoses include marine-grade stainless-steel fittings and tubing, precision made for an exact fit. Working pressure up to 3000 PSI.
Part No: 18-2137
|
|
|
|
|
Home -> Engine Systems -> Engine Parts
**CarburetorKit|**CarburetorKit.
Part No: 18-7755
|
|
|
|
Home -> Sailboat -> Rigging Products->Hi-MOD Compression Studs
These slim Hi-MOD compression fittings are at least as strong as the rated breaking load of the rigging wire, and they work equally well with right/left hand lay wire. " The shallow angled cone establishes direct mechanical grip on the wire's core and all the outer strands. Constructed from 316 stainless steel, with aluminum/bronze crown rings, they can be taken apart for maintenance and re-used without the need for new parts (provided that no overloading has occurred).
Part No: 14CTS532
|
|
|
|
Home -> Engine Systems -> Engine Parts->Gasoline Filter Spin-On Replacement Elements
Gasoline Filter Spin-On Replacement Elements.
Part No: S3232
|
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Starter-Outboard Repair Kit|**Starter-Outboard Repair Kit.
Part No: 18-6250
|
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Brightside One-Part Polyurethane with Teflon
Achieve beautiful results with this easy-to-apply enamel The look of a two-part polyurethane with the application ease of a standard enamel. Teflon additives provide excellent stain and abrasion resistance. UV stabilizers ensure high gloss and color retention. Poly-Flow 4000 resin is self-leveling and provides excellent abrasion resistance and chemical resistance. May be brushed or sprayed on fiberglass, wood, aluminum or steel. At least two coats are required. For use above true waterline.
Part No: Y4233/QT
|
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Brightside One-Part Polyurethane with Teflon
Achieve beautiful results with this easy-to-apply enamel The look of a two-part polyurethane with the application ease of a standard enamel. Teflon additives provide excellent stain and abrasion resistance. UV stabilizers ensure high gloss and color retention. Poly-Flow 4000 resin is self-leveling and provides excellent abrasion resistance and chemical resistance. May be brushed or sprayed on fiberglass, wood, aluminum or steel. At least two coats are required. For use above true waterline.
Part No: Y4100/QT
|
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape -> Striping Tape->Premium Striping Tape
Premium 2mm vinyl striping tape makes it easy to add a colorful accent to your boat! Should you change your mind or simply decide to update the look of your boat, it's easy to remove this tape without the need to sand or ruin your paint or finish. Made from the same material used in quality custom boat graphics. It will not crack or peel, even in salt water. It can even be applied below the waterline. It can be bent, waved, and applied around corners. Each roll is 50' long.
Part No: 9650088
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Easypoxy 1-Part Polyurethane Enamel
Flows on easily and gives the glossy appearance of being sprayedA one-part blend of urethane, silicone and alkyd products. Even brushed or rolled, it gives the high gloss appearance of being sprayed on. For best results, prime surface with Easypoxy White Undercoater. Great for fiberglass, wood or metal. Base Formulation: One-part polyurethane/silicone modified alkyd enamel . Recommended Application Method: Brush, roller, conventional/airless spray. Number of Coats Recommended: Two or more .
Part No: 3801-QT
|
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Easypoxy 1-Part Polyurethane Enamel
Flows on easily and gives the glossy appearance of being sprayedA one-part blend of urethane, silicone and alkyd products. Even brushed or rolled, it gives the high gloss appearance of being sprayed on. For best results, prime surface with Easypoxy White Undercoater. Great for fiberglass, wood or metal. Base Formulation: One-part polyurethane/silicone modified alkyd enamel . Recommended Application Method: Brush, roller, conventional/airless spray. Number of Coats Recommended: Two or more .
Part No: 3520-QT
|
|
|
|
Home -> Electronics -> Boat Instruments->Pathfinder, C-Series and RayChart Accessories, SeaTalk Cables
RayMarine Pathfinder and RayChart accessories Extension cables for hsb splitters, active heading sensors, Radome cables, mounts and much more!.
Part No: D286
|
|
|
