Welcome! Please Sign-In
Top Sellers
T-Ball Swage Fitting, 1/8" Wire Size from ALEXANDER-ROBERTS
T-Ball Swage Fitting, 1/8" Wire Size from ALEXANDER-ROBERTS
Electropolished 316 stainless steel. Running Back style has a stainless bail rather than a swage end, to accept Dyneema or other rope for a running backstay. *Running Back style has a stainless bail rather than a swage end to accept Spectra or other rope for a running backstay. Style: Swage . Material: Electropolished Type 316 stainless steel . Configuration: T-ball swage .
Whale Gulper 220 Pump, 12V DC, Draw: 2.4A from WHALE PUMPS
Whale Gulper 220 Pump, 12V DC, Draw: 2.4A from WHALE PUMPS
Use this 3. Large 3/4" inlet and outlet valves are cut at 45° angles to minimize flow restriction. Ports rotate to the position you need to facilitate hose connections and it mounts vertically or horizontally—making installation a snap! It can run dry for extended periods without burnout and boasts a large diaphragm that generates up to 13' of lift. Rubber mounting feet reduce noise. Features: Will run dry without damage and pump a mixture of air and water . Large single diaphragm .
CARB GASKET KIT from SIERRA
CARB GASKET KIT from SIERRA
Sierra carb kits and gaskets for engine tune ups.
Yamaha Carb Kit from SIERRA
Yamaha Carb Kit from SIERRA
Sierra carb kits and gaskets for engine tune ups.
Replaces OMC P/N 378444 from SIERRA
Replaces OMC P/N 378444 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
Impeller, 18-3062 from SIERRA
Impeller, 18-3062 from SIERRA
Recommended replacement schedule is every 3 years for fresh water and every year for salt water Click to view a Sierra Impeller Application Chart (PDF) For further assistance, have your year & model information handy and call our Product Advisors at 1-800-BOATING.
For Chrysler/Force, 89-817109A2 from SIERRA
For Chrysler/Force, 89-817109A2 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
Halyard Kit, 1/8" Wire Dia., 3/8" Line Dia., 40' Wire Length, 40' Line Length from WEST MARINE RIGGING
Halyard Kit, 1/8" Wire Dia., 3/8" Line Dia., 40' Wire Length, 40' Line Length from WEST MARINE RIGGING
Convenient, do-it-yourself kits offer an economical way to replace old halyards We offer these kits for those who want to replace their old halyards or install new low-stretch halyards. Made of the highest quality 7x19 oil-free stainless wire and New England Ropes premium white Sta-Set yacht braid. Comes with a Flemish eye at the rope end, and a thimble and sleeve, but no shackle. Rope Type: Sta-Set Yacht Braid . Shackle: Flemish eye splice, sleeve and thimble, no shackle .
Dyform Wire - 6MM 1X19, 7810BL from NAVTEC
Dyform Wire - 6MM 1X19, 7810BL from NAVTEC
Control your rig and sail plan more accurately with a low-stretch, high-performance wire strand. Dyform is an essential performance requirement on many racing sailboats and on cruising yachts seeking higher performance and greater margins of safety. It has 30% greater breaking strength and 25% less stretch than conventional wire strand. Wire strands are specially shaped to fill more cross sectional area for greater resistance to elastic stretch. Same corrosion resistance of 316S31 stainless.
Wiretec 405 Sparkplug Wire Set from WIRE TEC (MAGSTAR)
Twisted Pair Wire with Shield from ANCOR MARINE
Twisted Pair Wire with Shield from ANCOR MARINE
Similar to Ancor duplex wire, except that the conductors are twisted and surrounded by a copper shield for extra protection against noise and electrical interference. Red/black conductors. Recommended by ABYC for DC wiring near compasses and other magnetically - sensitive devices. Sold per foot. Wire Type: Twisted Pair . Construction: Tinned Copper . Conductors (Color and # of): 1 Red, 1 Black . Color of Exterior Insulation: White . Shielding: Copper Shield . Approvals: UL, ABYC, CSA .
10 Micron Replacement Filter Element for OMC 502905 from SIERRA
10 Micron Replacement Filter Element for OMC 502905 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. Today’s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage.
30GPH Cartridge, Replaces Racor S3240 from SIERRA
30GPH Cartridge, Replaces Racor S3240 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
60GPH Cartridge, Replaces Racor S3227 from SIERRA
60GPH Cartridge, Replaces Racor S3227 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
Furler Kit for Boat Length to 16', 500lb. SWL, 1/8" Max. Wire dia., 1/4" Pin dia., 2-1/2" Pin-to-Pin, 5/32" Furling Line dia. from HARKEN
Furler Kit for Boat Length to 16', 500lb. SWL, 1/8" Max. Wire dia., 1/4" Pin dia., 2-1/2" Pin-to-Pin, 5/32" Furling Line dia. from HARKEN
Furl or set your jib from your cockpit Harken small boat furlers allow the sail to be set and furled from the cockpit, a critical convenience in many racing dinghies and trailerable sailboats. Constructed of Hardkote anodized Teflon-impregnated aluminum, they feature multiple stacked races of Delrin or Torlon ball bearings for smooth rotation under load. The jib’s luff wire must be properly seized to the sail, since it carries most of the headstay load. 434 furler for dinghies under 16ft. (4.

32" Wire Size from ALEXANDER-ROBERTS, Distrcap from SIERRA

White from WEST MARINE Home -> Boats & Motors -> Inflatable Boats->Inflatable Boat Top Coating
Restore Hypalon or PVC. Remains flexible. Inflatables can be deflated and rolled without cracking the coating. Quart covers 10’ boat.
Part No: TPW-1
Mercury Outboards, 2001-2005, All 2-stroke models, 2.5-250HP from SELOC PUBLICATIONS Home -> Engine Systems -> Engine Parts
SELOC Marine tune-up and repair manuals provide the most comprehensive, authoritative information available for outboard, inboard and stern-drive engines, as well as personal watercraft. SELOC has been the leading source of how-to information for the marine industry since 1974. This manual covers Mercury Outboard, all 2-stroke models, 2. 5-250HP from 2001-2005. Every manual features: Easy-to-follow, step-by-step, illustrated procedures . Hundreds of exploded drawings, photographs and tables .
Part No: 1418
Full Synthetic Marine Engine Oil - SAE 30 - 5 Quarts from SIERRA Home -> Engine Systems -> Engine Lubrication
Full Synthetic Marine Engine Oil SAE 30 .
Part No: 18-9410-4
Manual from SIERRA Home -> Engine Systems -> Engine Parts
**Manual|**Manual.
Part No: 18-01602
Distrcap from SIERRA Home -> Engine Systems -> Engine Parts
**DistributorCap|**DistributorCap.
Part No: 18-5380
Machine Swage Interlocking Gate Eye, 3/16" Wire Size from JOHNSON, C.S. Home -> Cordage -> Rigging Products->Interlocking Gate Eyes
A universal hinge for gate opening, the eye on the standing part of the lifeline wire prevents the lifelines from going slack when the gate is open.
Part No: 22-304
Spares Kit for Whale Gulper 220 Pump from WHALE PUMPS Home -> Plumbing -> General Purpose Pumps->Repair and Service Kits, Spare Parts
Parts service and repair kits for Whale Water Systems Units.
Part No: AK1550
Flaxpkg from SIERRA Home -> Engine Systems -> Propellers & Drive Trains
**Packing-Flax|**Packing-Flax.
Part No: 4711
Finish Gel Coat - Waxed Non-Lam, Pint, White from WEST MARINE Home -> Paint & Maintenance -> Epoxy & Fiberglass->Finish Gel Coat - Waxed, Non-Laminating
Use with polyester and epoxy resins for reliable, high-strength coverings, laminates, and repairs. Medium density.
Part No: 105175
Pump Kit from SIERRA Home -> Engine Systems -> Engine Parts
**Service Kit-WaterPump|**Service Kit-WaterPump.
Part No: 18-3265
12" Antenna Extension from WEST MARINE Home -> Electronics -> Antennas, Mounts, Cable -> Antenna Mounts->Stainless-Steel Antenna Extensions
Increases antenna height for better rangeHeavy-wall SS tubing with 1"-14 pitch threads (M and F) at the ends.
Part No: 4197 SS
#407 Low-Density Filler - 15.2 OZ from WEST SYSTEM Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Additives & Fiberglass->#407 Low Density Filler
Easy-to-sand, microballon-based filler A blended microballoon-based filler. Combine with 105 Epoxy Resin to make fairing putties that are easy to sand or carve. Relatively strong on a strength-to-weight basis.
Part No: 407-15
Marithane Wheel, 3" Dia., 2.8125"W, 0.5" Hole Size from WINDLINE Home -> Anchor & Docking -> Windlasses & Rollers -> Anchor Rollers & Mounts->Marithane Wheels
Make your own bow roller or replace your present one with a durable Marithane wheel. Hand-cast from an elastomer—unmatched in ability to resist wear and distortion at high loads. More durable, yet quieter than either hard plastic or metal.
Part No: WH16
OMC Cobra Stern Drive, 1986-1998, All models from SELOC PUBLICATIONS Home -> Engine Systems -> Engine Parts
SELOC Marine tune-up and repair manuals provide the most comprehensive, authoritative information available for outboard, inboard and stern-drive engines, as well as personal watercraft. SELOC has been the leading source of how-to information for the marine industry since 1974. Step-by-step illustrated keyed procedures guide you through every conceivable job possible, including all adjustments necessary. Accurate specifications and wiring diagrams covers all Gasoline Engines and Drive Systems.
Part No: 3404
Mercury Outboard 1965-89, L6, V6, 90-300HP from SELOC PUBLICATIONS Home -> Engine Systems -> Engine Parts
Designed and written to serve the needs of the professional mechanic, do-it-yourself boat enthusiast, instructor and student, these manuals are based on actual teardowns done by Seloc’s editors/authors in our on-site facility. Step-by-step illustrated keyed procedures guide you through every conceivable job possible, including all adjustments necessary. This repair manual covers all Mercury outboards, 90-300 h. , in-line 6 and V6 models, including fuel injected units and MR drives. 1965-1989.
Part No: 1408
Kwik-Lok Stainless-Steel Gunwal Tiedown 13' from WEST MARINE Home -> Trailer & Parts -> Trailer Parts & Carriers->Kwik-Lok Stainless-Steel Gunwale Tiedowns
Easy-to-use tiedowns for safer trailering A good choice for salt or brackish water because of their non-corroding stainless-steel hardware. SUR-Grip stainless-steel Kwik-Lok buckle. Built-in closure stores excess polyester webbing while trailering. Vinyl-coated stainless steel S-hooks with keeper. Available in 10', 13', 16' and 20' lengths.
Part No: F19009
T-Ball Swage Fitting, 7/32" Wire Size from ALEXANDER-ROBERTS Home -> Cordage -> Rigging Products->T-Ball Swage Fittings
Electropolished 316 stainless steel. Running Back style has a stainless bail rather than a swage end, to accept Dyneema or other rope for a running backstay. *Running Back style has a stainless bail rather than a swage end to accept Spectra or other rope for a running backstay. Style: Swage . Material: Electropolished Type 316 stainless steel . Configuration: T-ball swage .
Part No: TSW7
Bearing from SIERRA Home -> Engine Systems -> Propellers & Drive Trains
**Bearing-Roller Tapered|**Bearing-Roller Tapered.
Part No: 18-1162
Rod from SIERRA Home -> Engine Systems -> Engine Parts
**Rod-Connecting|**Rod-Connecting.
Part No: 18-1757
Complete Double Braid Splicing Kit from SAMSON ROPE Home -> Cordage -> Rigging Products -> Rigging, Sewing, Splicing->Double Braid Splicing Kit
Includes everything you need to make a smooth splice in double braid: tubular fids for 1/4", 5/16", 3/8", 7/16" and 1/2" line, a pusher and complete instructions. Fids and pusher are also sold separately.
Part No: 9990070
Crew Overboard Pole Accessory - White Plastic Flag Tube from HARKEN Home -> Safety -> Man Overboard Gear->Crew Overboard Pole Accessory - Backstay Mount Sleeve
Blue acrylan flag sleeve for the Backstay mount crew overboard pole (Model 317883).
Part No: 202013
Side Guard, 3-1/2"H x 1-3/8"W x 10'L from TAYLOR Home -> Anchor & Docking -> Fenders & Docking->Dock Pro™ Double-Molded Profiles
Commercial-grade, double-molded PVC dock edging is industrial strength to suit the needs of dock builders, marinas and large boat owners.
Part No: 46030
Dia 5/16", Thread 18, Pack of 50 from FASCO FASTENERS Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->Cap Nuts - Bulk Packs
Type 18-8 stainless steel.
Part No: 1362A
A. Marelon Ball Valves, 1/2" from FORESPAR Home -> Plumbing -> Fittings & Valves->Marelon Ball Valves & Tailpieces
A. Marelon Ball Valves - High-strength, lightweight glass-reinforced Marelon. After 11,000 duty cycles, they still hold 80psi of air leak-free. B. MarelonTailpieces - Hose barbs on one end. NPS pipe threads on the other. C.
Part No: 905100
Side Guard, 3-1/2"H x 1-3/8"W x 10'L from TAYLOR Home -> Anchor & Docking -> Fenders & Docking->Dock Pro™ Double-Molded Profiles
Commercial-grade, double-molded PVC dock edging is industrial strength to suit the needs of dock builders, marinas and large boat owners.
Part No: 46013
Snap Hook, 4"L, 3630lb. MWL from WICHARD Home -> Sailboat -> Shackles, Snaps & Fittings->Stainless-Steel Snap Hooks
Stainless steel, asymmetric, with eye.
Part No: 2326
200 Series (for R26SUL), 2 Micron Spin-On Replacement Element from RACOR-PARKER FILTRAT Home -> Engine Systems -> Engine Parts->Standard Spin-On Replacement Elements
For Racor Spin-On Series Diesel Fuel Filter/Water Separators.
Part No: R26SUL
MRV Wiper Motor Cover from AFI Home -> Engine Systems -> Horns/Wipers/Glove Boxes
Constructed of white ABS plastic. Easily installed.
Part No: 33025
Acrylic Sheet, 24"L x 27"W x 1/4", White from WEST MARINE Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Polymer Lumber->Marine Lumber Plastic Building Material
An ideal material for building projects to replace worn-out teak or plastic laminates. Marine Lumber is high-density polyethylene which is stabilized to resist saltwater, chemicals, and sunlight. It will not rot or delaminate, and is easily cut, routed, shaped and drilled, using standard woodworking tools. It retains its original color indefinitely, and doesn’t require refinishing. The scuff-resistant surface cleans easily and quickly with a scrub brush and light abrasive cleaner.
Part No: P10-2524WHA271W
KIT CAM from JABSCO Home -> Engine Systems -> Engine Parts -> Cooling Systems->Pump Service Kits
These kits simple mechanical characteristics ensure trouble-free running and long life.
Part No: 7867-0000
   Company History
   Mission Statement
   Press Room
   Careers at West Marine
   Affiliate Program
   Annual Catalog
   Store Locator
   And More...
   Stock Price
   Press Releases
   SEC Filings
   Email Alerts
   Analyst Coverage
   Management Team
   Financial FAQ
   And More...
   Terms Of Use
   Returns/Exchanges
   Privacy Policy
   Contact Us
   Site Map
   Annual Catalog
   Product Recalls
   And More...
Product offering and prices listed on this website (www.westmarine.com) are limited to Internet and phone orders (1-800-BOATING). Prices on periodic web-only specials apply only to Internet orders. Product offering and/or prices may vary at West Marine retail stores. ©2009 West Marine | All Rights Reservedpics11