Top Sellers
|
|
|
|
Hose Adapter, From 1-1/8" to 3/4"-5/8" from RULE INDUSTRIES
#69 is stepped & adapts from 1-1/8" to 3/4" - 5/8" #57 is an elbow & adapts from 1-1/8" to 1" NPT #67 adapts from 1-1/2" to 1-1/8".
|
|
|
1-7/8" Polished Brass Flush Ring Pull from ABI
Highly polished brass . Convenient flush-fitting ring pull for cabinets, small doors, and hatches. . 1-7/8"L x 1-1/2"w . Requires four #5 fasteners .
|
PE-1 Lexan Mast Pad Eye from FORESPAR
For use on our small poles. 1-3/4"H x 1-1/4" x 5/8"dia. ring. Same ring as supplied with 4-8 and 6-12 poles.
|
Surface-Mount Titan Bilge Pump from WHALE PUMPS
Powerful, lightweight bilge pump. Constructed entirely from non-corroding materials. The Titan has a quick release clamp for speedy maintenance. The removable handle can be oriented in any direction. Surface mount and thru-deck mount models available. gpm: 28. Material: Plastic. Dimensions: 15-9/16"H x 9-1/4"W x 17-1/4"L. Port Sizes: 1-1/2".
|
Vertical Plunger Galley Pump, White from FYNSPRAY
Affordable, quality plastic pump with European styling. Vertical plunger action, with a 4" spout. Material: Chrome. Capacity: 58 strokes/gal. Dimensions: 4"H. Cutout Size: 1 1/4". Clearance 9".
|
Potable Water Holding Tank, 3 Gal. from TODD ENTERPRISES
1520) requirements. Standard Tanks feature a multiple port arrangement that enables use as a sanitation holding tank or for potable water storage. They include two 1 1/2" fill/drain ports and two 1/2" vent/supply ports. Designed for waste storage, each includes two 1 1/2" ports for inlet and drain and one 1/2" vent port. Both Standard and Heavy-Duty Tanks feature threaded NPT ports that are molded in to eliminate stress cracks and leaks. One year warranty.
|
CP Bronze Strap Hinge - 1.125" H x 6" W from PERKO
Chrome plated bronze. Pin Height: 1-1/8" by 6" open width. Each hinge requires six #10 fasteners.
|
Gas Deck Fill, Locking from PERKO
Includes grounding lug with screw and integral retainer for cap For 1 1/2" hose Impervious to gasoline.
|
Flush Lock and Latch from PERKO
Black plastic, with stainless steel "D" ring handle, stem and lock nut. Two O-rings for increased water resistance. Position indicator shows open or closed position. Lock with 2 keys. Door thickness: 3/8" to 1-1/4" . Face plate dimensions: 2-7/8" x 2-7/8" . Adjustment latch bar: 1-1/16" to 2-9/16" .
|
Mas Gelcoat Repair Kit, White from MAS EPOXY
Permanently repair nicks, gouges and scratches in fiberglass hulls and decks with these easy repair kits. Gelcote can be used immediately over repairs made with polyester and vinylester. To use over epoxy repairs, the epoxy must be allowed to fully cure - check the epoxy cure schedule for further details. White Gelcoat kit includes: 1 2oz. jar of white Gelcote paste. 1 1/4fl. bottle of hardener . Multicolor Gelcoat kit includes: 7 colors - white, red, yellow, tan, blue, green, black 1 2oz.
|
Rim Latch Sets - Reverse Bevel with Flush Strike from PERKO
Chrome-plated zinc. Sliding lock button. Case size: 2 1/8'' x 1 3/4''. Escutcheon Size: 4 3/8'' x 1 1/4''. For Door: 5/8'' to 1 3/8''.
|
|
|
|
1, 1-1, Mercruiser from SIERRA, Pistonkit from SIERRA, Puller from SIERRA
|
|
Home -> Plumbing -> Marine Sanitation -> Head Parts->Service Kits & Spare Parts for Raritan Heads
.
Part No: 1214W
|
|
|
|
Home -> Engine Systems -> Engine Parts->200 & 400 Series Spin-On Replacement Elements
For Racor Spin-On Series Diesel Fuel Filter/Water Separators.
Part No: S3204TUL
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports->Bomar & Nibo Hatch Parts
With these spare parts for your Nibo or Gray hatch, you can replace worn or damaged parts for a fraction of the cost of replacing the hatch. Low-Profile Gasket in a 9' length. 9/16" Gasket in a 10' length. Available for the 100 series: Riser Arm Male Hatch Knob Female Hatch Knob. Hatch Tiedown Dog. Left-Locking Quick Dog.
Part No: P100-55
|
|
|
|
Two position is for engines with a separate starter pushbutton. Three position: Off/Ignition/Start. Four position: Accessory/ Off/Ignition/Start or Off/Run/Push to Choke/Battery-Start (magneto switch). Brass construction, 2 keys supplied. 13/16" dia. mounting hole.
Part No: M-550-BP
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains
**Washer-Thrust Foward Gear|**Washer-Thrust Foward Gear.
Part No: 18-0198
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyestraps, Fairleads, Bails->Stanchion Mounted Bullseye Fairleads
Mount without drilling on stanchion or base from 7/8" to1" diameter. Deluxe model has a stainless steel-bushed bulls-eye to minimize friction. Easily installs with clamp. No need to drill holes.
Part No: 40-503
|
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Piston Kit|**Piston Kit.
Part No: 18-4069
|
|
|
|
Home -> Cordage -> Rigging Products->Cast Pelican Hooks
Good looking hooks for great strength and security. Large pelican “bill” accepts lots of lifeline tension. Smooth, sleek, snag-free design. Spring-loaded pull pin and split ring for easy release.
Part No: 182177
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers->Lance Cleats
For use when space or weight is at a premium. A single aluminum alloy cam is mounted vertically in a black molded frame.
Part No: R3605
|
|
|
|
Home -> Trailer & Parts -> Trailer Lighting -> Trailer Lighting->LED Identification Light Bar
Shock-, vibration- and corrosion-resistant Tri-Bar LED Light is constructed of durable ABS plastic. Three submersible LED lights. 6" and 12" apart, and is required for trailers more than 80" wide. Operates from 9–16V. Pre-wired with 7" leads. Available with attractive Clear lenses.
Part No: 49232-5
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Locking Caps for Deck Fills
Locking caps provide peace of mind. Black Acetal plastic. .
Part No: 1324DP1BLK
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting->Traditional Chrome Bi-Color and Sidelights
For powerboats and sailboats less than 12m or 39. 4'. Chrome-plated brass (except where noted). 1nm visibility. Horizontal and vertical sidelights are sold in pairs. Bi-colors sold individually. Case Material: Chrome-plated brass or zinc (as noted) . Mounting Hardware: #4 FH (Models 281113, 257139, 268724), #8 FH (Models 281097, 199663) sold separately . Volts: 12V . Draw: 0. 80A .
Part No: 1310DP0CHR
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Brass Screw Eyes - Bulk Packs
Brass screws are intended for brass fittings and decorative use.
Part No: 2815A
|
|
|
|
Home -> Seating & Covers -> Seating -> Seat Hardware
Side lever release for quick and easy removal of any standard seat.
Part No: 830
|
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Tool-Bearing Puller|**Tool-Bearing Puller.
Part No: 18-9849
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Standard T-Track
Made of 6061-T6 anodized aluminum, this track features three stop pin holes between fastener holes. Holes at 1-3/8" (34mm) intervals allow sailors to fine-tune sails with three-times the adjustment of normal track. Also works well with reefing blocks and spinnaker mast eyes. The concave shaped riser fits most spar sections and allows for proper sealant bedding on flat surfaces. Mounting holes on 4" centers.
Part No: 40-62
|
|
|
|
Outstanding solvent penetration resistance for all marine paints. . Bonded fiber formation reduces contamination of paint or varnish. . Use with Hand Masker M3000 Dispenser. .
Part No: 06738
|
|
|
|
|
Home -> Trailer & Parts -> Trailer Lighting->LED Identification Light Bar
Shock-, vibration- and corrosion-resistant Tri-Bar LED Light is constructed of durable ABS plastic. Three submersible LED lights. 6" and 12" apart, and is required for trailers more than 80" wide. Operates from 9–16V. Pre-wired with 7" leads. Available with attractive Clear lenses.
Part No: 49212-5
|
|
|
|
Home -> Anchor & Docking -> Windlasses & Rollers
The Lewmar TT anode has a specially designed stainless-steel sheath for optimal retention.
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Spare Bronze Flanged Lock Nuts for Thru-Hulls
Designed and built with large surface to distribute load, for longer service life and more reliable connections. Plain bronze finish.
Part No: 65-006-42
|
|
|
|
Home -> Cordage -> Rigging Products->T-Ball Swage Fittings
Electropolished 316 stainless steel. Running Back style has a stainless bail rather than a swage end, to accept Dyneema or other rope for a running backstay. *Running Back style has a stainless bail rather than a swage end to accept Spectra or other rope for a running backstay. Style: Swage . Material: Electropolished Type 316 stainless steel . Configuration: T-ball swage .
Part No: TRB-6
|
|
|
|
Home -> Engine Systems -> Engine Parts
Replacement for Mercruiser Inboard/Outboard #32-90949T .
Part No: 18-2761
|
|
|
|
Home -> Fishing -> Trolling Motors->Sonar Ready Digital Wireless Lowrance Series Trolling Motors
Motorguide sonar ready adaptor, connect your fishfinder or sonar equipment.
Part No: 8M4000386
|
|
|
|
Home -> Sailboat -> Tiller & Rudder
For boats up to 22', the Swivel Stick is an economical fixed-length tiller extension. Features a removable Speed Lock rubber universal end fitting. . 5/8" dia. black anodized aluminum tubing with a rubber ball-style handle. . Made in U. S. A. . Mfr.
Part No: 102002
|
|
|
|
Home -> Sailboat -> Rigging Products->Eye Jaw Toggles
Bronze or Chrome Eye Jaw Toggles.
Part No: FT 12 BRZ
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Combination Gasoline Fill/Tank Vent
Integral tank vent with flame arrestor. Angled design with chrome-plated bronze cap and black plastic base. Fits 1-1/2"dia. fuel and 5/8"dia. vent hose. 2-7/16" neck length.
Part No: 0540DPGCHR
|
|
|
|
|
COOLER MAT 162 QT.
Part No: CM-162
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting -> Navigation Lights->OGM LED Navigation Light Accessories
Industry experts and avid boaters alike have chosen Orca Green Marine's innovative LED lights for their rugged construction and reliability. All lights are USCG Certified for 2 nautical miles and meet COLREGS '72 standard for boats up to 50 meters (running lights), and sailboats up to 20 meters (TriAnchor light). Each light is individually tested underwater to assure waterproof performance. Integrated DC-DC power supply maintains consistent brightness over a wide operating voltage range.
Part No: Switch-Sel
|
|
|
|
|
Home -> Engine Systems -> Engine Parts
**SealKit-Lower Unit|**SealKit-Lower Unit.
Part No: 18-2685
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks -> Locks->Nautilus Combination Lock
Set your own easy-to-remember combination on these padlocks with four-pin tumblers. You set the combination using the key provided. All brass internal components and a stainless steel shackle for superior corrosion protection. Type: Combination . Combination Type: Reset-able four tumbler . Material: Brass body and internal components, solid stainless shackle .
Part No: 15813
|
|
|
