Top Sellers
30GPH Cartridge, Replaces Racor S3240 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
|
60GPH Cartridge, Replaces Racor S3227 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
|
Anode Kit - 818298Q 1 from MERCURY MARINE
Mercury/MerCruiser Anodes and Anode Kit - VPN - - Description - - Fits - A 31640Q 4 Trim Tab Anode Fits most Mercury/Mariner outboards 35 hp. & above and all MerCruiser except Bravo. & above and all MerCruiser except Bravo. C 806189Q 1 Trim Cylinder Anode Fits Alpha One Gen II drives. D 806190Q 1 Trim Cylinder Anode Fits Bravo I, II, III, X, XR, XZ and Blackhawk drives. F 826134Q Side Pocket Anode Fits Mercury/Mariner 30-300hp outboards, Force 90 & 120hp 1995 and newer outboards.
|
Flipper Pump from WHALE PUMPS
Easy back-and-forth action produces one-way discharge. Spout swivels. Made of nylon, aluminum and synthetic rubber. For 1/2"ID hose. Material: Nylon, aluminum, rubber . Capacity: 2gpm . Dimensions: 7-1/8"H x 6"dia. . Cutout Size: 2". Clearance: 4-1/2" .
|
10 Micron Replacement Filter Element for OMC 502905 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. Today’s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage.
|
Noise Reduction Seam Tape from WEST MARINE
The 3/32" flexible vinyl sheet is fused between two layers of foam—an exterior (“decoupler”) layer and an interior (“absorber”) layer. The exterior layer is then covered with a thin film (2. 5 mil) of mylar, reinforced with elastomer-coated fiberglass, for surface heat protection and enhanced sound absorption. The overall effect is a dramatic noise reduction when compared with single-layer foam barriers. Available in two overall thicknesses. Peel and stick backing for easy installation.
|
CARB GASKET KIT from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Yamaha Carb Kit from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Replaces OMC P/N 378444 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
Impeller, 18-3062 from SIERRA
Recommended replacement schedule is every 3 years for fresh water and every year for salt water Click to view a Sierra Impeller Application Chart (PDF) For further assistance, have your year & model information handy and call our Product Advisors at 1-800-BOATING.
|
For Chrysler/Force, 89-817109A2 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
Outdrive Gasket Set, 18-260, TR/TRS, 1973-1993 from SIERRA
Gasket and O-ring kits that seal the drive to the transom.
|
Vertical Sidelights, White from PERKO
For powerboats and sailboats less than 20m or 65. 6'. Plastic frames with ultrasonically welded lenses and gasketed plastic bases. 2nm visibility. Per pair, except bi-color. Case Material: Plastic . Case Dimensions: 3-1/2"L x 2-1/4"W x 13/16"H . Mounting Hardware: #8 FHMS (sold separately) . Volts: 12V . Draw: 0. 7A .
|
Water Circulating Pump - #18-3581 - Chrysler Inbd # 3004886, 3619542, 3619859, 3745985 from SIERRA
Water Pumps The water pump is the heart of your inboard or I/O cooling system. All Sierra pumps are bidirectional and can be installed on reverse rotation engines. The pumps are also powder coated for additional protection. Includes mounting gasket. Pumps include brass bi-directional impellers, brass plugs and fittings, carbon resin seal, all mounting gaskets, stainless steel seal cup and spring, stainless steel back plate (where required), and powder coating for maximum corrosion protection.
|
|
|
|
2" from PERKO, 4" from PERKO, Anode from SIERRA, Gasket from SIERRA
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes->Electronic Horns
This under-deck hidden horn is designed for vessels under 12 meters, draws less than 1/2 amp and is easily installed in a standard 2 1/4" cutout. Each unit is completely sealed and comes with a waterproof gasket. All openings are sealed to let sound out but prevent water from coming in. Loudness dB: 106-108dB. Design Standards: USCG, CE. Dimensions: 4. 92"L x 3. 11"W x 3. 43"D. Draw: Less than 0. 5A at 12V.
Part No: 84400-7
|
|
|
|
Home -> Seating & Covers -> Covers & Biminis
Contains 40 sets of Button Sockets with 1/4" Barrel, 22 sets of Button Studs for 1/4" Barrel and Eyelet, eight Button Studs with #8 x 3/8" Tapping Screw, 10 Button Studs with #8 x 5/8" Tapping Screw, Punch Tool and Base.
Part No: KP7262W
|
|
|
|
Home -> Seating & Covers -> Carpet, Vinyl & Canvas->Flotilla Marine Grade Vinyl Fabric 54"W
Flotilla marine grade vinyl fabric is an excellent choice anywhere tough vinyl is needed. Width: 54" Weight: 29 oz. per linear yard 10 Degrees Cold Crack Light fastness 300 hrs. + minimum Meets the following codes: Motor Vehicle Safety Standard #302 California Tech Bulletin #117 Abrasion- Heavy Duty (Wyzenbeek) Federal Standard 191-A Method 5304.
Part No: 91416
|
|
|
|
Home -> Seating & Covers -> Carpet, Vinyl & Canvas->Flotilla Marine Grade Vinyl Fabric 54"W
Flotilla marine grade vinyl fabric is an excellent choice anywhere tough vinyl is needed. Width: 54" Weight: 29 oz. per linear yard 10 Degrees Cold Crack Light fastness 300 hrs. + minimum Meets the following codes: Motor Vehicle Safety Standard #302 California Tech Bulletin #117 Abrasion- Heavy Duty (Wyzenbeek) Federal Standard 191-A Method 5304.
Part No: 91409
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Gasket-Head|**Gasket-Head.
Part No: 18-3879
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting -> Navigation Lights->2-Mile Stainless-Steel Sidelights
Horizontal deck mount Smooth contour prevent lines from snagging on housing Stainless steel electrical contacts will not corrode Compact size allows installation on confined decks Tinned-copper wire leads for easy installation and corrosion-resistance.
Part No: 3820G7
|
|
|
|
Home -> Engine Systems -> Control Systems->3300 Universal Control Cables
For I/Os, inboards and outboards. Fit most engines, including Mariner (40 hp and below), Yamaha, Volvo, Suzuki, Tohatsu, Honda, Nissan and Chrysler/Force. Just measure tip-to-tip for length. Sold individually. 10-32 UNF threads.
Part No: CC17212
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Bronze Check Valves
For vertical or horizontal use in fuel or water systems to maintain pump prime or prevent backflow to fluid source. The unique design minimizes fluid turbulence and flow restriction.
Part No: 290606
|
|
|
|
Home -> Engine Systems -> Control Systems -> Control Cables->400 Cables
For pre-1979 Johnson/Evinrude/OMC engines. Engine-connection kit not included. Measure tip-to-tip for length. Stainless core. 8" bend radius.
Part No: CC17017
|
|
|
|
Home -> Interior, Flags & Gifts -> Flags & Staffs -> Code/Official Flags->International Flags
All flags available in our vibrant bright nylon colors. These beauties add an international flair to any boat. All World flags measure 12" x 18" with brass grommets.
Part No: 93159
|
|
|
|
Home -> Clothing Accessories -> Hats, Watches, & Accessories->Floating Hat
A chin strap keeps this cotton canvas hat on your head and a wide brim protects you from the sun.
Part No: NATURAL-M
|
|
|
|
Home -> Sailboat -> Rigging Products->Turnbuckle, Jaw and Swage
Exclusively for lifeline applications. 1/4" pin dia. Lock nuts prevent loosening. Open body (O), and Tubular (T) styles.
Part No: 26-412
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Has older style small quick connect on engine end and 5/16" NPT threaded fitting on the tank end. Primer bulb is included in the 8ft. (2. 44 m) assembly. Engine end fits Force 5 HP, and fits 9. 9/15HP (1997 & prior), and 25HP (3 cyl. Tank end has fitting for thread in style tank connection or attaching a bayonet. Length: 8' Hose Diameter: 5/16" Silverado 2000 Premium Includes: Primer bulb 5/16" diameter (18-8004) with hose clamps. Female tank end fuel connector (18-8070).
Part No: 18-8010
|
|
|
|
Home -> Engine Systems -> Control Systems
**Shift Lever|**Shift Lever.
Part No: 18-3762
|
|
|
|
Home -> Engine Systems -> Control Systems->3300 Universal Control Cables
Teleflex engine cables are manufactured to exceed specifications for fit, function, reliability, and quality dictated by all major engine and boat manufacturers. Always replace both engine cables at the same time" "when one cable wears out, the other will soon follow. To find the length of existing and installed cables, check the engine or throttle ends for a stamp indicating the length. Low-friction, high-quality cables are stainless steel, with stainless steel and brass fittings.
Part No: CC17214
|
|
|
|
Home -> Engine Systems -> Engine Instruments->Heavy-Duty Series Instruments for Diesel Engines
The best instrumentation for big boats. White graphics on deep black faces, with very rugged black nylon housings. Low-profile bezels in polished stainless with scratch-resistant glass. All have 2-1/8"dia. housings, except tachometers which have 3-3/8"dia. housings. Reverse polarity protected. Silicone-damped pointers provide smooth sweep and easy reading in rough water. *These items are instruments only.
Part No: 80150P
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring->SS Screw Pin Anchor Shackles
To prevent accidental opening, always seize (safety wire) the shackle pin.
Part No: 6618S
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting->Pole Light Bases
The "universal fit" design of these all round pole lights easily adjusts for up to 20° of rake. Their bright long-life LEDs consume minimal power (less then half of an incandescent bulb) and are corrosion and vibration resistant. Globes are permanently sealed to the body and feature a reduced-glare design. Electrical contacts are gold plated to assure reliable connections and long dependable service in the marine environment. 36" Pole length. Two pole screw positions.
Part No: 1060PB0DP
|
|
|
|
Home -> Seating & Covers -> Carpet, Vinyl & Canvas->Flotilla Marine Grade Vinyl Fabric 54"W
Flotilla marine grade vinyl fabric is an excellent choice anywhere tough vinyl is needed. Width: 54" Weight: 29 oz. per linear yard 10 Degrees Cold Crack Light fastness 300 hrs. + minimum Meets the following codes: Motor Vehicle Safety Standard #302 California Tech Bulletin #117 Abrasion- Heavy Duty (Wyzenbeek) Federal Standard 191-A Method 5304.
Part No: 91417
|
|
|
|
Home -> Seating & Covers -> Carpet, Vinyl & Canvas->Flotilla Marine Grade Vinyl Fabric 54"W
Flotilla marine grade vinyl fabric is an excellent choice anywhere tough vinyl is needed. Width: 54" Weight: 29 oz. per linear yard 10 Degrees Cold Crack Light fastness 300 hrs. + minimum Meets the following codes: Motor Vehicle Safety Standard #302 California Tech Bulletin #117 Abrasion- Heavy Duty (Wyzenbeek) Federal Standard 191-A Method 5304.
Part No: 91418
|
|
|
|
Home -> Engine Systems -> Control Systems->3300 Universal Control Cables
.
Part No: CC17220
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Dock Pro™ Vinyl Dock Edging
Prevent scuffing when you dock Vinyl dock guard is specially formulated for softness and durability to protect your boat or dinghy. Each piece installs easily with screws or nails to the edge of docks, piers and floats. Material: Extruded PVC . Attachment Method: Stainless steel dock nails . Shock Absorption Mechanism: Flexible PVC .
Part No: 46071
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting->Pole Light Bases
The "universal fit" design of these all round pole lights easily adjusts for up to 20° of rake. Their bright long-life LEDs consume minimal power (less then half of an incandescent bulb) and are corrosion and vibration resistant. Globes are permanently sealed to the body and feature a reduced-glare design. Electrical contacts are gold plated to assure reliable connections and long dependable service in the marine environment. 36" Pole length. Two pole screw positions.
Part No: 1046P00DP
|
|
|
|
Home -> Engine Systems -> Control Systems->3300 Universal Control Cables
.
Part No: CC17213
|
|
|
|
Home -> Engine Systems -> Control Systems->3300 Universal Control Cables
.
Part No: CC17208
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Propeller Nut Kit s Yamaha
PROP NUT KIT YAMAHA -6H1|PROP NUT KIT YAMAHA -6H1.
Part No: 18-3782D
|
|
|
|
Home -> Ventilation -> Blowers & Heaters -> Cabin Heaters->Cabin Heater Pipes & Accessories
Cabin Heater Pipes & Accessories.
Part No: 13111
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains
**Anode|**Anode.
Part No: 18-6027
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Each assembly comes complete with a large alcohol resistant primer bulb with fittings, co-extruded braided fuel line hose which is alcohol resistant, and barb connectors which can be used with large, as well as small engines. Assemblies use a compounded, tough & pliable UV-resistant hose. Promotes maximum fuel flow. Includes fittings built to OEM Specifications for replacement parts. Uses o-ring construction on all fittings for tight, leak-free connections. Specifications: 5/16".
Part No: 034395-10LP
|
|
|
|
Home -> Engine Systems -> Engine Instruments->Heavy-Duty Series Instruments for Diesel Engines
The best instrumentation for big boats. White graphics on deep black faces, with very rugged black nylon housings. Low-profile bezels in polished stainless with scratch-resistant glass. All have 2-1/8"dia. housings, except tachometers which have 3-3/8"dia. housings. Reverse polarity protected. Silicone-damped pointers provide smooth sweep and easy reading in rough water. *These items are instruments only.
Part No: 80590P
|
|
|