Top Sellers
Vertical Sidelights, White from PERKO
For powerboats and sailboats less than 20m or 65. 6'. Plastic frames with ultrasonically welded lenses and gasketed plastic bases. 2nm visibility. Per pair, except bi-color. Case Material: Plastic . Case Dimensions: 3-1/2"L x 2-1/4"W x 13/16"H . Mounting Hardware: #8 FHMS (sold separately) . Volts: 12V . Draw: 0. 7A .
|
Red/Green (for port, starboard and bi-color nav. lights) from DR. LED
Aqua Signal series 25 navigation lights LED replacement bulbs. 2nm brightness. Base Type: Gold plated dimpled festoon. *Click here for the Dr.
|
CARB GASKET KIT from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Yamaha Carb Kit from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Replaces OMC P/N 378444 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
Impeller, 18-3062 from SIERRA
Recommended replacement schedule is every 3 years for fresh water and every year for salt water Click to view a Sierra Impeller Application Chart (PDF) For further assistance, have your year & model information handy and call our Product Advisors at 1-800-BOATING.
|
For Chrysler/Force, 89-817109A2 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
Water Circulating Pump - #18-3581 - Chrysler Inbd # 3004886, 3619542, 3619859, 3745985 from SIERRA
Water Pumps The water pump is the heart of your inboard or I/O cooling system. All Sierra pumps are bidirectional and can be installed on reverse rotation engines. The pumps are also powder coated for additional protection. Includes mounting gasket. Pumps include brass bi-directional impellers, brass plugs and fittings, carbon resin seal, all mounting gaskets, stainless steel seal cup and spring, stainless steel back plate (where required), and powder coating for maximum corrosion protection.
|
Resin Coloring Agent - Admiral Blue from EVERCOAT
Match colors like a pro with these coloring agentsFor use with polyester or epoxy resins, fillers, or putties. These tints also work well with nonskid coatings. Use with West Marine Gel Coat or Evercoat Polyester Gel Paste.
|
Resin Coloring Agent - Brown from EVERCOAT
Match colors like a pro with these coloring agentsFor use with polyester or epoxy resins, fillers, or putties. These tints also work well with nonskid coatings. Use with West Marine Gel Coat or Evercoat Polyester Gel Paste.
|
Marine Color Vision Engine Spray Paint - Chrysler Blue, 12oz. from MOELLER
Color matched to your engine’s original color Marine Color Vision is formulated for the marine environment. For use on all outboard & inboard engines, stern drive and lower unit applications. Quick-dry formula!. Oil & Gasoline Resistant. 12 oz.
|
10 Micron Replacement Filter Element for OMC 502905 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. Today’s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage.
|
Johnson/Evinrude Outboard Starter, 120 to 140hp V4 (1985-99), 10 tooth drive gear from SIERRA
Sierra's new and remanufactured starters are the only marine starters that meet Marine UL standards. Sierra's remanufactured starters all have new solenoids, drives, bushings, brushes and springs. The bodies are powder coated for greater corrosion resistance. Sierra has entered an agreement with United Technologies to market their complete line of outboard starters and components. All are 100% load tested . Our remanufactured starters are covered by Sierra's customer satisfaction warranty .
|
30GPH Cartridge, Replaces Racor S3240 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
|
60GPH Cartridge, Replaces Racor S3227 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
|
|
Carbkit from SIERRA, Bi-Color Sidelight from ATTWOOD
|
|
Home -> Trailer & Parts -> Trailer Lighting
Replacement Parts for your under-80"W trailer with submersible LEDsDesigned specifically to fit leading-brand trailers, these LED lights feature stylish good looks with reliability to match. The submersible design meets all DOT/SAE specs. Lights mount with two mounting studs on 2" centers. The right light has six functions: tail, stop, turn, side and rear reflector and red marker. Left light: tail, stop, turn, side and rear reflector, red marker and a license plate illuminator.
Part No: 52652-5
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Cooling Systems
**Impeller|**Impeller.
Part No: 18-8901
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->Marine Surfacing Putty - Gallon
Versitile putty repairs scrapes, gouges, dings and dentsQuick, easy, permanent fiberglass, wood or metal repair. May be mixed with coloring agent. Formulation: Polyester putty Recommended Usage: Repairs to dents and scrapes in wood, fiberglass, stucco, cement, drywall and some metals Color: White, may be mixed with coloring agent to tint to desired shade. Recommended Usage: Repairs to dents and scrapes in wood, fiberglass, stucco, cement, drywall and some metals.
Part No: 105171
|
|
|
|
Home -> Engine Systems -> Control Systems -> Control Cables->400 Cables
For pre-1979 Johnson/Evinrude/OMC engines. Engine-connection kit not included. Measure tip-to-tip for length. Stainless core. 8" bend radius.
Part No: CC17014
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks
A tough boat hook is a valuable asset when launching, docking, mooring, or retrieving your favorite hat! Telescoping boat hook adjusts to 8' (240 cm). The threaded end accepts a deck brush, mop, squeegee and other accessories. A highly visible, soft vinyl top covers the thread and protects the boat's finish when fending off.
Part No: 4132
|
|
|
|
Home -> Interior, Flags & Gifts -> Flags & Staffs -> Code/Official Flags->International Flags
All flags available in our vibrant bright nylon colors. These beauties add an international flair to any boat. All World flags measure 12" x 18" with brass grommets.
Part No: 93162
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->FLAG Epoxy Resin
We highly recommend this resin for general purpose gluing applications where wet-out of fiberglass is not a consideration, and for all your filleting and fairing needs. FLAG Resin is a "medium" body resin specifically designed to perform as an adhesive and structural laminating foundation. FLAG is more reactive than our Low Viscosity Resin when mixed with Medium Hardener. FLAG Resin may be used with all MAS Hardeners, however, for filled applications we recommend our Medium Hardener.
Part No: FLAG032
|
|
|
|
Home -> Engine Systems -> Control Systems -> Control Cables->400 Cables
For pre-1979 Johnson/Evinrude/OMC engines. Engine-connection kit not included. Measure tip-to-tip for length. Stainless core. 8" bend radius.
Part No: CC17019
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->Rapid Cure Epoxy Kits
Mas's ONLY 1:1 ratio epoxy adhesive -- This stuff is FAST!! It's great for quick repairs and bonding. Mix small amounts - no more than 1/2 oz. of each of the resin and hardener at a time. You'll have 1-2 minutes to use it, and 5-10 minutes to set it. You can sand in 1 hour, and full cure is in 4-6 hours. Be Careful - this is FAST, PERMANENT, and WATERPROOF. The MINI, 8 oz. kits are great for keeping on board or at home in the tool kit. Useful for quick kayak and canoe - or home - repairs.
Part No: 30-100
|
|
|
|
Home -> Seating & Covers -> Carpet, Vinyl & Canvas->Flotilla Marine Grade Vinyl Fabric 54"W
Flotilla marine grade vinyl fabric is an excellent choice anywhere tough vinyl is needed. Width: 54" Weight: 29 oz. per linear yard 10 Degrees Cold Crack Light fastness 300 hrs. + minimum Meets the following codes: Motor Vehicle Safety Standard #302 California Tech Bulletin #117 Abrasion- Heavy Duty (Wyzenbeek) Federal Standard 191-A Method 5304.
Part No: 91407
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Putties, Sealers, Misc
Great for fiberglass and sheet metal ding repairsFiberglass filler with long strand reinforcing fibers for fiberglass and sheet metal repairs. Water-resistant. Hardener included. Great for quick and easy ding repair on fibergalss surfboards, sailboards, canoes and runabouts. Formulation: Polyester putty . Recommended Usage: Fiberglass and sheet metal repairs . Color: White.
Part No: 105170
|
|
|
|
Home -> Engine Systems -> Engine Parts
**CarburetorKit|**CarburetorKit.
Part No: 18-7726
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Hose-Molded|**Hose-Molded.
Part No: 18-70942
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers -> Boat Support->Super-Roller Polyurethane Bow Guards
- Outside Dia - - Hole Dia - - Fits Bracket - - Vendor Part # - V-Bow Stop V-Bow Stop Mini Bow Stop Bow Stop Bow Stop Bow Roller Bow Roller --- --- 4-1/4" 5-1/4" 5-1/4" 3" 3-1/4" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 3" 4" 3" 3" 4" 3" 4" RP-3 RP-404 ULT-435 ULT-3 ULT-4 RP-335 RP-444.
Part No: ULT-4
|
|
|
|
Home -> Electrical -> Shore Power
The 50A shorepower systems are offered in 125V, 3-conductor pole, 2-pole models and 125V/250V, 4-conductor, 3-pole models. Make sure you order matching components, as they are not interchangeable (except covers). Yellow, moisture resistant vinyl cover . Features a moisture resistant seal with Lexan® ring. Fits over connectors # 203703 and # 237214 . Mates to # 229724, # 390625 and # 421893 inlets. Highly ozone- and UV-resistant.
Part No: 7715CRN
|
|
|
|
.
Part No: 191832
|
|
|
|
Home -> Sailboat -> Tiller & Rudder -> Rudder & Wheel Hdwr->Transom Fittings
Transom gudgeons and pintles.
Part No: 18.16B
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->Bronze Frearson (R & P) Flat Head Wood Screws - Bulk Packs
Silicon Bronze - the generic term used for various types of copper-silicon alloys. The properties of the alloy; a high percentage of copper, and small amounts of silicon, manganese or aluminum added for strength.
Part No: 2095A
|
|
|
|
Home -> Seating & Covers -> Carpet, Vinyl & Canvas->Flotilla Marine Grade Vinyl Fabric 54"W
Flotilla marine grade vinyl fabric is an excellent choice anywhere tough vinyl is needed. Width: 54" Weight: 29 oz. per linear yard 10 Degrees Cold Crack Light fastness 300 hrs. + minimum Meets the following codes: Motor Vehicle Safety Standard #302 California Tech Bulletin #117 Abrasion- Heavy Duty (Wyzenbeek) Federal Standard 191-A Method 5304.
Part No: 91401
|
|
|
|
Home -> Safety -> Fire Extinguishers -> Portable Extinguishers->Mariner 110 Fire Extinguisher Twin-Pack
These durable, USCG-approved Mariner 110 Fire Extinguishers feature easy-to-use, non-corrosive Zytel valves and handles. Tri-Class extinguishers will put out oil, grease and electrical fires, as well as wood, paper, cushions, canvas, fiberglass, rubber and plastics. monoammonium phosphate dry chemical. Extinguishing agent is corrosive to metal and electronics. Includes USCG-approved plastic strap bracket. Type: Portable . Activation Method: Manual . Disposable or Rechargeable: Disposable .
Part No: 466627
|
|
|
|
Home -> Seating & Covers -> Covers & Biminis
Prevents water from pooling and extends boat cover life. Uses either male canvas snap, grommet or plain end cap to work with any cover .
Part No: 11992
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Rings-Piston|**Rings-Piston.
Part No: 18-3969
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting
Replacement sealed beam bulb for flush mount floodlights (45960-0001, 45930-2012).
Part No: 18753-0351
|
|
|
|
Home -> Engine Systems -> Control Systems -> Control Cables->400 Cables
For pre-1979 Johnson/Evinrude/OMC engines. Engine-connection kit not included. Measure tip-to-tip for length. Stainless core. 8" bend radius.
Part No: CC17013
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting->2-Mile Stainless-Steel Sidelights
Horizontal deck mount Smooth contour prevent lines from snagging on housing Stainless steel electrical contacts will not corrode Compact size allows installation on confined decks Tinned-copper wire leads for easy installation and corrosion-resistance.
Part No: 3810-7
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Hose-Molded|**Hose-Molded.
Part No: 18-70943
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Thermostat Kit|**Thermostat Kit.
Part No: 18-3539
|
|
|
|
Home -> Interior, Flags & Gifts -> Flags & Staffs -> Code/Official Flags->International Flags
All flags available in our vibrant bright nylon colors. These beauties add an international flair to any boat. All World flags measure 12" x 18" with brass grommets.
Part No: 93163
|
|
|
|
Home -> Electronics -> Boat Instruments -> Instrument Mounts->Swing Mount TO 60LB
Mount electronics to swing out when you need them, fold away when you don't A versatile way to attach radar, sonar, computers and other devices. They can attach on horizontal or vertical surfaces including rails and masts from 1" to 2. 1/2"dia. Attachments are stainless steel and joints have nylon bearing surfaces for easy use. Arms are 6"L and rated to support 65lb. Choose from either a 2" X 6 1/4" end plate that pivots, or a ball and socket for more adjustability.
Part No: RAM-109-1A
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
**Vernatherm|**Vernatherm.
Part No: 18-3560
|
|
|