Top Sellers
Vertical Sidelights, White from PERKO
For powerboats and sailboats less than 20m or 65. 6'. Plastic frames with ultrasonically welded lenses and gasketed plastic bases. 2nm visibility. Per pair, except bi-color. Case Material: Plastic . Case Dimensions: 3-1/2"L x 2-1/4"W x 13/16"H . Mounting Hardware: #8 FHMS (sold separately) . Volts: 12V . Draw: 0. 7A .
|
Medium Edging, White, 25' Coil, 3-1/2"H x 1-1/2"W from TAYLOR
Prevent scuffing when you dock Vinyl dock guard is specially formulated for softness and durability to protect your boat or dinghy. Each piece installs easily with screws or nails to the edge of docks, piers and floats. Material: Extruded PVC . Attachment Method: Stainless steel dock nails . Shock Absorption Mechanism: Flexible PVC .
|
LetterU - White, 3" from HARDLINE PRODUCTS SR
Popular vinyl letters to meet USCG requirementsSelf-adhesive, 3"H vinyl, block, letters and numbers. Meet Coast Guard requirements when applied on contrasting background with proper spacing. Black or white. Sold individually or by the kit. Four of each letter and number for a total of 144 pieces in the kit. Meet USCG requirements when affixed to a contrasting background and properly spaced. Self-adhesive vinyl.
|
F8B-9 Direct Bolt-On Engine Cooling Pump, Detroit Diesel OEM from JOHNSON PUMPS
Used by premier marine engine manufacturers including Volvo Penta, Westerbeke, Yanmar and MAN, Johnson Pump is a leading provider of cooling pumps to OEMs worldwide. The pumps feature bronze housings, flexible impellers and different port sizes that satisfy a variety of cooling needs with flows between 3 and 165 g. p. m.
|
Delrin Sheave, 1/2" Max. Line Dia., 1-7/16" OD, 3/8" ID, 5/8" Width from SCHAEFER
Schaefer sheaves are designed to be compatible with Schaefer products, and are not intended for use in other manufacturer's blocks. Delrin sheaves are injection molded with UV inhibitors and monitored molding cycles for a stronger product.
|
300 Series Fairlead Block, Fixed Style, 2-7/32" x 3/4" from SCHAEFER
Same as the Schaefer 200 Series fairlead blocks, but with twice the working load. Use #10 fasteners. Configuration: Lead block. Sheave: UV-stabilized white Delrin®. Ball Bearings: Delrin. Sheave Size: 1-7/16" (37mm). Line Diameter: 7/16". Cheek Material/Finish: Polished stainless.
|
Number 3 - Black, 3" from HARDLINE PRODUCTS SR
Popular vinyl letters to meet USCG requirementsSelf-adhesive, 3"H vinyl, block, letters and numbers. Meet Coast Guard requirements when applied on contrasting background with proper spacing. Black or white. Sold individually or by the kit. Four of each letter and number for a total of 144 pieces in the kit. Meet USCG requirements when affixed to a contrasting background and properly spaced. Self-adhesive vinyl.
|
Liquid Life-Calk Sealant - Black, 3 OZ from BOAT LIFE
Low-viscosity caulk/sealant fills cracks and seamsLow-viscosity version of Life-Calk. Formulation: Low-viscosity polysulfide caulking/sealant . Recommended Usage: Fine cracks and seams; fiberglass, wood, metal, glass. Material Incompatibilities: Glass to vinyl; ABS, Lexan; plastic hardware to fiberglass, wood. Adhesion Rating: Tensile adhesion: 80 ps. ; ultimate elongation: 200%. Cure Time: Tack free: 24 hrs; Complete cure: 10 to 20 days. Cleanup: Life-Calk Solvent. Quantity: 3oz. tubes.
|
13-1/4" x 17" Propeller for Evinrude/Johnson Outboards from MERCURY MARINE
Three-blade aluminum one-piece propellers for Evinrude/Johnson outboards. 8–15hp, 9. 9–15hp 2–stroke 1974 & up, 8/9. 9/15hp 4–stroke 1995 & up: Model 5026695. 20–35hp, 20hp 1984–97, 25/30hp 1984 & up, 35hp 1976 & up: Models 4744207, 8640492. 40–75hp, 40hp 1984 & up, 65hp 1980–85, 48hp 1987–96, 75hp 1975–85, 50hp 1975 & up, Sprint 1986–92, 55hp 1976–79, Formula E 1986–92, 60hp 1980–85: Models 8640484, 4744173, 4744181. 45–75hp large gearcase, OMC Cobra 2. 3–2.
|
12 Volt White Dual Trumpet Mini Air Horn from AFI
White epoxy powder-coated finish over solid brass. Noncorrosive Lexan® diaphragm. 12vDC. . Draws 20 amps max. Includes compressor, air tubing, fittings, and hardware. 5" W x 3-3/4"H x 9-1/2" L.
|
12-1/4" x 15" Propeller for Evinrude/Johnson Outboards from MERCURY MARINE
Three-blade aluminum one-piece propellers for Evinrude/Johnson outboards. 8–15hp, 9. 9–15hp 2–stroke 1974 & up, 8/9. 9/15hp 4–stroke 1995 & up: Model 5026695. 20–35hp, 20hp 1984–97, 25/30hp 1984 & up, 35hp 1976 & up: Models 4744207, 8640492. 40–75hp, 40hp 1984 & up, 65hp 1980–85, 48hp 1987–96, 75hp 1975–85, 50hp 1975 & up, Sprint 1986–92, 55hp 1976–79, Formula E 1986–92, 60hp 1980–85: Models 8640484, 4744173, 4744181. 45–75hp large gearcase, OMC Cobra 2. 3–2.
|
10" x 13" Propeller for Evinrude/Johnson Outboards from MERCURY MARINE
Three-blade aluminum one-piece propellers for Evinrude/Johnson outboards. 8–15hp, 9. 9–15hp 2–stroke 1974 & up, 8/9. 9/15hp 4–stroke 1995 & up: Model 5026695. 20–35hp, 20hp 1984–97, 25/30hp 1984 & up, 35hp 1976 & up: Models 4744207, 8640492. 40–75hp, 40hp 1984 & up, 65hp 1980–85, 48hp 1987–96, 75hp 1975–85, 50hp 1975 & up, Sprint 1986–92, 55hp 1976–79, Formula E 1986–92, 60hp 1980–85: Models 8640484, 4744173, 4744181. 45–75hp large gearcase, OMC Cobra 2. 3–2.
|
|
|
Black 3-Strand Nylon, 7/16'' Diameter, 5300lb. Breaking Strength from NEW ENGLAND ROPES
Dramatic resistance to damaging internal and external abrasion Combining premium nylon fiber with a high-quality marine coating and New England Rope’s superior manufacturing processes produces line that is five times more abrasion-resistant wet than any other nylon line. You can actually feel this critical performance advantage when you handle the supple line. Stretch: 16% at 15% of breaking strength. *Approximately 10–15% less strength than White Premium Three-Strand Nylon.
|
Impeller 09-812B - For pump size F6B from JOHNSON PUMPS
More durable, longer lasting replacement pump has a one-piece bronze body and bronze end-plate with a replaceable cam and wear-plate so it can be rebuilt when needed.
|
|
from SCHAEFER, S from HARKEN, L from JOHNSON, White from PERKO, 3
|
|
Home -> Electrical -> Electrical Wire -> Duplex Wire->Duplex Wire, Mini Packs
White jacket over a black and a red conductor. Wire Type: Duplex . Construction: Tinned Copper . Conductors: One Black, One Red . Color of Exterior Insulation: White .
Part No: 189503
|
|
|
|
Home -> Foul Weather Gear & Jackets -> Long Underwear & Rash Guards -> Rash Guards->UV Short Sleeve Rashguard Shirt
Provides excellent UV protection (tested to UPP 50+) and dries very quickly. Constructed with ergonomic paneling and flatlock seams from lighter weight 6oz. Lycra® (88% nylon, 12% elastene) for comfort under a wetsuit or dinghy suit. Sizes: S-XXL.
Part No: 4401BXL
|
|
|
|
Home -> Cordage -> Rigging Products->Hi-MOD Compression Extenders
Solid and strong, the innovative Hi-MOD extender lends incredible holding power to any compression system.
Part No: CTX932
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->AGC Fuse Block Systems
Glass-filled polycarbonate case holds six 30A circuits and ground. Clear insulating cover with label recesses for standard Blue Sea Systems labels (not included) protects all conductive parts and allows easy inspection of AGC or MDL fuses. Tin-plated components. Max.
Part No: 5018
|
|
|
|
Home -> Engine Systems -> Engine Parts->Gasoline Filter Spin-On Replacement Elements
Gasoline Filter Spin-On Replacement Elements.
Part No: S3220SUL
|
|
|
|
Home -> Cordage -> Rigging Products->Quick Attach™ Stud Swage Fitting
The advantage of "Quick Attach" over conventional fittings is the arrangement of the wedges on the outside of the cable which makes assembly much easier and allows different types of wire to be used with the same fitting. The Suncor Quick Attach Stud mechanical swage fitting allows very fast attachment to any type of cable (1X19, 7X19, or 7X7) using only simple tools. Working Load Limit (WLL) is determined by the WLL of the wire being used.
Part No: C0771-1007
|
|
|
|
Home -> Sailboat -> Rigging Products->Turnbuckle, Jaw and Swage
Exclusively for lifeline applications. 1/4" pin dia. Lock nuts prevent loosening. Open body (O), and Tubular (T) styles.
Part No: 27-412
|
|
|
|
Home -> Paint & Maintenance -> Caulking & Adhesives
Bonds substrates quickly, for improved productivity. Bonds even difficult substrates including polyethylene, polypropylene and many other plastics. Dries in 1–2 minutes . Comes with an adjustable tip that allows the selection of a 1"–3" spray . Contains no mehylene chloride, 1,1,1-tyichloroethane or chlorofluorocarbons .
Part No: 30023
|
|
|
|
Home -> Electrical -> Shore Power -> Phone & TV Wiring
Use to build your own line.
Part No: PH6624
|
|
|
|
Home -> Cordage -> Rigging Products->Split Backstay Adjuster
This adjusting car replaces separate blocks and a connecting member. Tandem sheaves eliminate severe flexing of the backstay, providing a neat, thoroughly functional fitting. The 38 Series with Delrin sheaves is intended for boats under 30ft. , while the husky 39 Series with aluminum sheaves is intended for boats up to 40 feet. 5 to 1 ratio between backstay base width and car height. Example: If backstay width is 5', car height should not exceed 7-1/2' to 8' in height off deck.
Part No: 38-201
|
|
|
|
Home -> Plumbing -> Fittings & Valves
These scuppers boast large 6"W x 2"H openings for excellent drainage and a trap door that slams shut to keep the ocean out. UV-resistant, glass filled nylon is nearly indestructible. Outside dimensions: 7"W x 3"H.
Part No: SEA-BLOCK WHITE
|
|
|
|
Home -> Seating & Covers -> Tables->Quick Release Table Pedestal System
Revolutionary new table hardware system features a deck ring mount, that mounts flush with your deck so cutting a large center hole is not required. It's easy to use and install—the deck ring mounts nearly flush with deck for minimal interference when table is stowed. Quick release levers allow effortless take down of table for storage. Marine grade polymer components resist corrosion.
Part No: 75647:01
|
|
|
|
Home -> Electrical -> Electrical Wire->Primary Wire by the Spool
Ordinary automotive-type wire can suffer a loss of conductivity after a few months in the marine environment, caused by corrosion and/or vibration. Premium Ancor wire will provide a lasting solution for your sophisticated marine electronics and instruments to operate at peak potential. 600V . 105°C dry, 75°C wet . Rated for oily and wet environments . Type 3 stranded, with 5–10 times more copper strands than Type 2 . Marine UL-listed, and meets the highest ABYC standards for AC or DC use .
Part No: 102010
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Thermostat Kit|**Thermostat Kit.
Part No: 18-3666D
|
|
|
|
Home -> Cabinet & Deck Hardware -> Rail Fittings & Rub Rail->Plastic Handles and Hand Rails
Plastic handles and hand rails. Handles available in black or white PVC coated plastic. Handrails are white polypropolene. Handles are 10" long Handrails are 1 1/16W x 1 3/8"H. 1 loop: 13"L. 2 loop: 23"L. 3 loop: 33"L.
Part No: 65101
|
|
|
|
Home -> Electrical -> Batteries & Accessories -> Battery Switches & Cable
Patented contour lock system allows it to be used as a standalone unit or locked together with other switches. Meets ABYC requirements. Dimensions: 2. 75"L x 2.
Part No: 701
|
|
|
|
|
Home -> Cordage -> Rigging Products->Quick Attach™ Stud Swage Fitting
The advantage of "Quick Attach" over conventional fittings is the arrangement of the wedges on the outside of the cable which makes assembly much easier and allows different types of wire to be used with the same fitting. The Suncor Quick Attach Stud mechanical swage fitting allows very fast attachment to any type of cable (1X19, 7X19, or 7X7) using only simple tools. Working Load Limit (WLL) is determined by the WLL of the wire being used.
Part No: C0775-1006
|
|
|
|
Home -> Cordage -> Rigging Products->Turnbuckle Bodies
Chrome-plated bronze.
Part No: 34-612
|
|
|
|
Home -> Ventilation -> Vents -> Exterior Vents->Chromed Brass Clamshell Vents
Type: Passive clamshell vent Material: Chrome-plated brass Warranty: Five years.
Part No: 0339DP0CHR
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Marine Alkyd 50, (Commercial/Industrial Only)
Marine Alkyd 50 - Commercial/Industrial Only Marine Alkyd 50 is a single component marine grade alkyd finish. High gloss and good color retention. Fast drying and good leveling characteristics. Good resistance to chemicals cleaners and abrasion. Specifically designed for Steel and for (select styles) aluminum ships.
Part No: 3004G
|
|
|
|
Home -> Cordage -> Rigging Products->Tubular-Body, Stainless-Steel Turnbuckles
Series 03 and 04 include LH upper terminals (unless designated RH).
Part No: 04-110
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains
**Anode- Magnesium|**Anode- Magnesium.
Part No: 18-6099
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks->Heavy Duty Ring Pulls
Designed for heavy hatches where a large, strong ring pull is required. Polished cast brass or chrome. 2 3/4" x 2 1/4". Ring ID: 1 1/8". Requires #8 FH screws (sold separately).
Part No: F62-2750CH-1W
|
|
|
|
Home -> Electrical -> Interior Lighting -> Led Interior Lights->LED Utility Light with Snap-On Front Cover
Black or White Molded Plastic Snap-On Front Cover Conceals Mounting Screws Diffusion Lens Flush Mounting Easy Installation Pig Tail 12 Volt L. E. D.
Part No: 1074DP2WHT
|
|
|
|
Home -> Clothing Accessories -> Gloves->3/4 Finger Sailing Gloves
"They stay soft and flexible better that gloves made from Amara synthetic leather. " Perfect for Dyneema, Vectran and other synthetic line. The grip and durability of the Black Magic® palm material is superior to other sailing gloves. Nylon Spandex mesh for super fit. Minimal stretch when wet. Dries soft. Imported. Dinghy and inshore performance sailing . Configuration: 3/4-finger . Elastic wristbands, adjustable Velcro tabs . Gray/Black .
Part No: 2563M
|
|
|
|
Home -> Engine Systems -> Trim Tabs & Hydrofoils->Trim Tab Accessories
Installation and replacement parts for Bennett Trim Tabs.
Part No: IR1000
|
|
|
|
|
Home -> Clothing Accessories -> Gloves -> Sailing Gloves->3/4 Finger Sailing Gloves
"They stay soft and flexible better that gloves made from Amara synthetic leather. " Perfect for Dyneema, Vectran and other synthetic line. The grip and durability of the Black Magic® palm material is superior to other sailing gloves. Nylon Spandex mesh for super fit. Minimal stretch when wet. Dries soft. Imported. Dinghy and inshore performance sailing . Configuration: 3/4-finger . Elastic wristbands, adjustable Velcro tabs . Gray/Black .
Part No: 2563S
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->Series 02 Blocks
Small utility blocks to use for control line applications on small dinghies and one-designs. Single blocks are constructed of polished and tumbled stainless steel. The Delrin<V>® sheaves turn on stainless steel spacers which keep cheeks from squeezing and binding the sheave. Sheave: Delrin. Sheave Size: 1-1/16" (27mm). Line Diameter: Up to 5/16". Cheek Material/Finish: Stainless steel. Shackle/Strap Type: Stainless clevis/cotter.
Part No: 02-50
|
|
|
|
Home -> Trailer & Parts -> Hitches, Winches & Jacks->Removable Receiver Tube Ball Mounts
Removable ball mounts for use with most receivers with 2" x 2" openings. Shank hole size is 1". Available in steel or aluminum. Steel ball mounts are offered with a chromium or black powder coat finish. Mounts meet or exceed V-5 requirements. Removable ball platforms fit in most square receivers. For trailers with a maximum gross trailer weight of 5,000lb.
Part No: 21344
|
|
|
|
Home -> Fishing -> Fishing Accessories -> Rod Holders
Innovative design automatically snugs the rack’s bungee retaining cords in place when rods are inserted, securely holding gear even in the roughest seas. Easily add, remove or relocate the racks to suit changing fishing situations. Installs on virtually any T-top or tower without the need for drilling or screwing. Unique mounting system accommodates regular sized round, oval or square piping. Includes all installation hardware.
Part No: 67660
|
|
|
