Top Sellers
West Marine/SOSpenders PFD Rearming Kit, 3/8" Threaded Cylinder Neck Dia. from WEST MARINE
West Marine/SOSpenders PFD Rearming Kit Style: Automatic. Cylinder Weight: 38g. Cylinder Neck Diameter: 3/8" or 1/2" threaded. Inflator Type: Halkey-Roberts. Kit Contents: Cylinder, green pin, bobbin. PFD Brands Commonly Used With*: West Marine/SOSpenders PFD . Inflator Number: V85000. *The column "PFD Brands Commonly Used With" is not all inclusive. Rearming Kits may be used with other brands and vests.
|
West Marine SOS Kid’s Hybrid Rearming Kit from WEST MARINE
West Marine SOS Kid’s Hybrid Rearming Kit Style: Automatic. Cylinder Weight: 12g. Cylinder Neck Diameter: 3/8" threaded. Inflator Type: Halkey-Roberts. Kit Contents: Cylinder, green pin, bobbin. PFD Brands Commonly Used With*: SOS Kid’s Hybrid. Inflator Number: V85000. *The column "PFD Brands Commonly Used With" is not all inclusive. Rearming Kits may be used with other brands and vests.
|
West Marine/Stearns PFD Rearming Kit from WEST MARINE
West Marine/Stearns PFD Rearming Kit Style: Manual. Cylinder Weight: 16g. Cylinder Neck Diameter: 3/8" threaded. Inflator Type: Halkey-Roberts. Kit Contents: Cylinder, green pin. PFD Brands Commonly Used With*: West Marine/Stearns PFD. Inflator Number: 840. *The term "PFD Brands Commonly Used With" is not all inclusive. Rearming Kits may be used with other brands and vests.
|
Circlips, Package of Five (5) from LEWMAR
Spares Kit, Single-Speed Winches For all single-speed winches less than 11 years old, includes 4 pawls, 4 pawl springs, 4 circlips. . Spares Kit, Two-Speed Winches For all two-speed and self-tailing winches to 16ST-66ST. Includes 2 circlips, 8 pawls, 12 pawl springs, 3 keys, 8 gear spindle sleeves, 2 collets . Spares Kit, Three-Speed Winches For all three-speed nonself-tailing winches to 65. Includes 4 circlips, 8 pawls, 18 pawl springs, 4 plungers, 6 plunger springs, 2 closing rings .
|
PE-1 Lexan Mast Pad Eye from FORESPAR
For use on our small poles. 1-3/4"H x 1-1/4" x 5/8"dia. ring. Same ring as supplied with 4-8 and 6-12 poles.
|
Zinc Grouper Anode from CANADA METALS
Supplements your boat's existing anodes An excellent anodic device to supplement a vessel’s existing anode system, especially to counteract stray current from defective shore power. Clip to bolt on outdrive. Clip to grounding strap if possible or wire items together with copper wire and clip to wire. Do not connect to negative battery terminals. Dimensions: 8 1/4"L x 3 1/4"W x 1 3/8"D.
|
CARB GASKET KIT from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Yamaha Carb Kit from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
|
|
Anchor Chain Tensioner from JOHNSON, C.S.
Holds chain up to 5/16" firmly to keep your anchor quiet on its roller. A quick-release pin holds the welded handle securely in a tensioned position. 316 stainless steel.
|
Service Kit for 30124-0000 Bilge Pump, 8 GPM from JABSCO
Kit includes Connecting rod. Diaphragm. Ppulsation dampener. Valve plate. Valve set (inlet and outlet) .
|
3/8" Bow/Stern Eye - 1.03" ID Between Studs x 4.63" Thread Length from SUNCOR
Bow / Stern Eye 304 Stainless Steel - Formed . Each U-Bolt set includes four nuts (two standard and two beveled) . Includes one bow plate, and one stern plate. . Threads are "UNC". . Stock size: 3/8" . ID between studs: 1. 03" . Thread length: 2. 50" .
|
Halyard Kit, 1/8" Wire Dia., 3/8" Line Dia., 40' Wire Length, 40' Line Length from WEST MARINE RIGGING
Convenient, do-it-yourself kits offer an economical way to replace old halyards We offer these kits for those who want to replace their old halyards or install new low-stretch halyards. Made of the highest quality 7x19 oil-free stainless wire and New England Ropes premium white Sta-Set yacht braid. Comes with a Flemish eye at the rope end, and a thimble and sleeve, but no shackle. Rope Type: Sta-Set Yacht Braid . Shackle: Flemish eye splice, sleeve and thimble, no shackle .
|
|
Gasket 1189-0000 from JABSCO
Jabsco gaskets & gasket kits.
|
Impeller, 18-3062 from SIERRA
Recommended replacement schedule is every 3 years for fresh water and every year for salt water Click to view a Sierra Impeller Application Chart (PDF) For further assistance, have your year & model information handy and call our Product Advisors at 1-800-BOATING.
|
|
Kit from SIERRA, 8 from U, 12 from U, 3"ID from PERKO, (APR1332) from JABSCO
|
|
Home -> Electrical -> Exterior & Navigation Lighting->Quasar Bi-Color Deck-Mount Lights
Smoothly contoured, these lights are designed for use on boats to 20m or 65. 6'. A single locking screw connects the cap and base for easy installation and service. Resin lenses are tuned for maximum visibility. Includes 8W festoon bulb. Case Material: Plastic resin Case Dimensions: 3"L x 2-1/4"W x 1-3/8"H Mounting Hardware: Three #10 screws (not included) or mount to optional 3300 series snap-on base Volts: 12V Draw: 0.
Part No: 3123-7
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Includes large capacity 3/8" ID primer bulb and two hose clamps.
Part No: 18-8015
|
|
|
|
Home -> Safety -> Flares & Signaling Devices -> Horns & Whistles
Award-winning horn is great for emergency signaling or sending a message Winner of the 2003 Innovation Award presented by the National Marine Manufacturers Association. Our exclusive handheld horn is great onboard for emergency signaling or boat-to-boat hailing—and for camping, hunting, hiking or sporting events. This 9V horn uses Piezo-Electric technology and has no limited shelf-life so you don’t have the cost of replacement cans for your old airhorn. USCG approved. Maximum decibels: 112dB.
Part No: 545-5010-7
|
|
|
|
Home -> Watersports -> Tow Ropes & Accessories -> Watersport Accessories->Neoprene Comfo Sport Boots
High cut 5mm neoprene boots have a noncorrosive zipper and are easy to get on and off. Rubber toe and heel caps .
Part No: 260495
|
|
|
|
Home -> Cabin & Galley -> Stoves & Propane System -> Propane Systems->Onboard Propane Connection Hose Kit
Used in conjunction with the correct Type 3 control valve on the Marine Kettle Gas Grill, this kit allows you to connect your Magma gas grill into your on-board, pre-regulated, low pressure LPG (propane) system. Includes: All necessary brass fittings. Safety shutoff valve .
Part No: A10-223
|
|
|
|
Home -> Plumbing -> Fittings & Valves -> Metal Plumbing Fittings->Bronze Round Strainers
Helps keep debris out of water-intake lines that do not require a scoop strainer. Designed for use with an existing thru-hull fitting. Marine UL-listed.
Part No: 0086DP4PLB
|
|
|
|
Home -> Engine Systems -> Fuel Tanks->Bronze Ball Valves for Fuel Shut Off
Cast bronze with stainless lever and nut. Ball valve is polished chrome over brass. Glass-reinforced Teflon seats and seals. Operates smoothly. Fast 90° on/off turn.
Part No: 78-256-10
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting->#3562 Navigation Lights for Boats to 39'4" (12 meters)
Compact navigation lights with modern styling. Completely waterproof, yet vented. Break-resistant polycarbonate housing snaps together without screws. Bulb snaps into a holder supported above condensing surfaces. Acrylic lens. 10W bulbs in colored lenses are visible 1nm. ; stern light is visible 2nm. Masthead light is visible 2nm. Case Material: Polycarbonate . Case Dimensions: 3"H x 2. 5"W x 2"L .
Part No: 003562025
|
|
|
|
Exhaust Manifold Mounting Kit Mercruiser GM Inline 6 Cylinder 250cu. in.
Part No: 18-8531
|
|
|
|
Home -> Seating & Covers -> Carpet, Vinyl & Canvas->Sungard® , Marine Grade Upholstery Thread
Ultra-Violet Stable Thread for use on vinyl, canvas and endless other outdoor uses. An excellent match for Sunbrella fabrics Will not rot. Many popular colors available. 1" diameter bobbin.
Part No: 204Q4
|
|
|
|
|
Home -> Seating & Covers -> Carpet, Vinyl & Canvas->Sungard® , Marine Grade Upholstery Thread
Ultra-Violet Stable Thread for use on vinyl, canvas and endless other outdoor uses. An excellent match for Sunbrella fabrics Will not rot. Many popular colors available. 1" diameter bobbin.
Part No: 214Q4
|
|
|
|
Home -> Engine Systems -> Engine Parts->Impeller Repair Kits
Includes impeller, rubber seal(s), impeller plate, impeller gasket(s), and O-rings.
Part No: 18-3080
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Fuel & Air Filters->AIRSEP® Air Filter Cleaning/Re-Oiling Kits
This air filter cleaning and conditioning kit is designed to service all Walker air filter elements installed on AIRSEPS, or high performance silencer assemblies. Each kit can typically clean four (4) 9" x9" tapered filters or equivalent two (2) times.
Part No: BAF2000
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->#404 High Density Filler
Use this filler when ultimate strength is most important A thickening additive developed for maximum physical properties in hardware bonding where high-cyclic loads are anticipated. It can also be used for filleting and gap-filling where maximum strength is necessary. May be added to the resin/hardener at a rate of 20–30% by weight, depending on the viscosity needed.
Part No: 404-45
|
|
|
|
Home -> Anchor & Docking -> Anchors->Color Coated Slip-Ring Fluke Anchors
This anchor combines the firm penetration of its traditional fluke style with a slip ring that makes it especially easy to retrieve in the event of a snag. It features a durable PVC coating that protects boat finishes, stays cleaner, and buffers rattling and vibration while underway. Combine it with the Coated Anchor Chain (below) in coordinated colors to match your watercraft Style: Light-duty fluke . Material: PVC-coated, hot-dip galvanized steel . Recommended Scope (line:depth): 7:1 .
Part No: 669-6-ZW
|
|
|
|
Home -> Engine Systems -> Engine Instruments -> Engine Instr. Components
**Warning Kit|**Warning Kit.
Part No: MP41400
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Tune Up Parts->Ignition Tune-Up Kits
Complete kits include cap and rotor, contacts and condenser if required. Tune-up kits have everything that the complete kits have, except for the cap.
Part No: 18-5279
|
|
|
|
Home -> Engine Systems -> Engine Parts->Thermostat Kits
Thermostats made from corrosion-resistant stainless steel and brass. Kits include gasket(s) necessary for installation.
Part No: 18-3666
|
|
|
|
Home -> Plumbing -> Marine Sanitation->Service Kit for Electric Toilet
Replacement and Service Parts We stock an extensive selection of parts and service kits for virtually all plumbing products. In addition, we can quickly get any part you need to repair your Jabsco, SHURflo, Raritan or Groco equipment directly from the manufacturer through our Special Order department. If you know the part number you need simply order the part using the Model or manufacturer's part number. If you don't know either number, please call us for assistance.
Part No: 92700-0060
|
|
|
|
|
Home -> Watersports -> Tow Ropes & Accessories -> Watersport Accessories->Neoprene Comfo Sport Boots
High cut 5mm neoprene boots have a noncorrosive zipper and are easy to get on and off. Rubber toe and heel caps .
Part No: 260515
|
|
|
|
Home -> Fishing -> Fishing Accessories->Electric Plug and Socket
Electric plug and socket for use with Depthpower electric models.
Part No: 1125
|
|
|
|
|
Home -> Cabin & Galley -> Stoves & Propane System -> Propane Systems->Onboard Propane Connection Hose Kit
Used in conjunction with the correct Type 3 control valve on the Marine Kettle Gas Grill, this kit allows you to connect your Magma gas grill into your on-board, pre-regulated, low pressure LPG (propane) system. Includes: All necessary brass fittings. Safety shutoff valve .
Part No: A10-224
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Third Mate Fenders
We created this simple, less expensive fender for those of us (the vast majority) who don't hang our fenders horizontally. We eliminated one eye, and constructed our fender with premium vinyl that is soft, flexible and durable. The construction process yields an extremely uniform wall thickness with ribs to minimize roll. Offers the same protection as higher-priced fenders. A needle valve permits precise pressure regulation.
Part No: 31018
|
|
|
|
Home -> Engine Systems -> Motor Mounts->Outboard Locks
Help make your outboard less attractive to thieves, and also keep it from vibrating loose while running. The vinyl-clad steel tube slides over the mounting screws and is secured with a hardened brass padlock. Padlock is recessed inside the tube to protect against cutting. Comes with two keys. *Fits: OMC 6-30hp, Merc/Mariner 8-25hp, Yamaha 9. 9-40hp, Suzuki 8-13hp.
Part No: 74038
|
|
|
|
Home -> Safety -> Flares & Signaling Devices
Combines a dazzlingly bright strobe and a focused-beam flashlight for working on deck at night. Ruggedly built to ensure reliable operation, both lights are powered by two AA batteries (not included). A positive three-position switch prevents accidental illumination, but care must be exercised to ensure that there is always enough battery power available to power the strobe in an emergency.
Part No: 1916
|
|
|
|
|
Home -> Seating & Covers -> Carpet, Vinyl & Canvas->Sungard® , Marine Grade Upholstery Thread
Ultra-Violet Stable Thread for use on vinyl, canvas and endless other outdoor uses. An excellent match for Sunbrella fabrics Will not rot. Many popular colors available. 1" diameter bobbin.
Part No: 216Q4
|
|
|
|
|
Home -> Seating & Covers -> Carpet, Vinyl & Canvas->Sungard® , Marine Grade Upholstery Thread
Ultra-Violet Stable Thread for use on vinyl, canvas and endless other outdoor uses. An excellent match for Sunbrella fabrics Will not rot. Many popular colors available. 1" diameter bobbin.
Part No: 222Q4
|
|
|
|
Home -> Electrical -> Shore Power -> Adapters, Plugs & Outlets->30 Amp, 125 Volt Shore Power Components
Watertight power inlet with 4-way, right-angle safety enclosure. Black non-metallic, with two 3/4" KO holes. Accepts 15A, 20A, and 30A receptacles. Also accepts 7420CR weatherproof covers.
Part No: 6080
|
|
|
|
Home -> Seating & Covers -> Seating->Millennium 2000 Seat Swivel/Slide System
The easy-to-use aluminum Mill 2000 system combines dual Quick-Lock handles, for stable, wobble-free support; a positive lock-action slide, with 6" fore-and-aft travel; and a swiveling spider, with 4-prong, 360° rotation, for smooth operation. Slider plate is 13 3/4" x 8" with a 5" x 12" mounting hole pattern. Use with 2 7/8"dia. fluted pedestals only, including the PosiPin-type that secures the stanchion at specific 1" increments with a spring-loaded pin.
Part No: 75020:01
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Fuel & Air Filters->Turbine Filter Installation Fittings for 900- & 1000-Series Filters
Racor Turbine Filter Installation Fittings.
Part No: 913-O10-H5-WM
|
|
|
