Top Sellers
Stern Rail Outboard Motor Mount - Aluminum for 1-1/4" Railings from EDSON CORPORATION
Built to hold motors up to 15 hp or 100 lbs/45 kg. Convenient cleat and side handles allow you to tie the motor and lock it safely on board. The non-corroding polished 316 stainless bracket with non-skid pad, bolted to the UV stable poly backing board always looks ship-shape… no more varnishing. Bottom cleat comes unattached so that it will fit any rail spacing. Note: 1-1/4” rail version comes complete with anodized aluminum bracket, stainless cleat and stainless U-bolt for 1-1/4” railing.
|
1/4" NPT X 3/8" Brass hose barb from MOELLER
1/4 NPT X 3/8" Brass Hose barbs with male threads.
|
|
|
Diamond Pad Eye 3-1/4" from SUNCOR
Diamond Pad Eyes. Heavy-Duty, one-piece precision casting.
|
Yamaha Outboard 1984-1996, 1-4 Cyl., V4, V6, 2-250 HP from SELOC PUBLICATIONS
Designed and written to serve the needs of the professional mechanic, do-it-yourself boat enthusiast, instructor and student, these manuals are based on actual teardowns done by Seloc’s editors/authors in our on-site facility. This repair manual covers all Yamaha outboard engines, 12-250 HP, 1-4 cylinder, V4, V6 models, 1990 to 2001. Every manual features: Easy-to-follow, step-by-step, illustrated procedures . Hundreds of exploded drawings, photographs and tables . Troubleshooting sections .
|
Flex Trim - Black 1/2" opening from TACO PRODUCTS
For a beautiful finished look on unfinished edges. Just push it on and it's on to stay. Grips on difficult materials, compound curves, etc. Individual corrosion resistant aluminum clips for a permanent grip. Black or White . Sold in 25' lengths. . Available in four sizes:. 5/32" opening x 35/64"H. 1/4" opening x 1/2"H. 3/8" opening x 5/8"H.
|
PE-1 Lexan Mast Pad Eye from FORESPAR
For use on our small poles. 1-3/4"H x 1-1/4" x 5/8"dia. ring. Same ring as supplied with 4-8 and 6-12 poles.
|
Off/1/All/2 Battery Switch, 380 Continuous Amps, 850 Intermittent Amps from PERKO
For high-amperage applications like diesel engine starters, large inverters and windlasses. Reinforced polycarbonate body, 1/2"dia. brass terminal connections and an alternator field disconnect. Alt. Field Disc. : Yes . Switch Material: Reinforced Polycarbonate. Terminal Material/Size: Brass 1/2"dia. . Switch Dimensions: 5-1/4"sq. x 3-3/8"H .
|
Series 150 Clear PVC Tubing, 1/2"ID, 45psi Burst Pressure from SHIELDS RUBBER
Single layer, nontoxic, FDA-approved clear vinyl tubing. Ideal for drain lines, iceboxes, refrigerators, livewells, bilge pump discharge, freshwater lines, water and holding tank vents. Sold per foot: 50’ maximum continuous length for 1/4" and 3/8" hose; 100' maximum continuous length for 1/2" hose and larger. Application: Non-pressurized water system supply; sink, shower, and icebox drains. Material: FDA formula vinyl. Reinforcement: None. Temperature Range: N/A.
|
Roller Shaft Cap Nuts Only - 1/2", Pack of 8 from C E SMITH
Roller Size Length Shaft Diameter Shafts and Nuts 4" 5 1/4" 1/2" 4" 5 1/4" 5/8" 5" 6 1/4" 1/2" 5" 6 1/4" 5/8" 8" 9 1/4" 5/8" 10" 11 1/8" 5/8" 11" 12 3/4" 1/2" 12" 13 1/2" 5/8" Shaft Only 18" 19" 5/8" Cap Nuts Only Packs of 8.
|
|
|
Acetal Thru-Transom Scupper from WEST MARINE
One-way rubber flapper valve and thru-hull fitting. For 1-1/2"ID hose. Overall length: 6-1/4". Installation hole size: 2". Max.
|
4-Cup 12V Coffee Maker from WARING
Enjoy fresh coffee ashore or afloat with this 4-cup coffee maker that plugs into any 12V outlet. Features include a durable stainless-steel carafe, dripless pour spout, knuckle guard, 30-minute auto shut off, “On” indicator light, and a convenient “Brew Pause” feature that lets you pour a cup of coffee before brewing has finished. Includes coffee scoop and three filters. 10 1/4"H x 5 1/4"W x 7 5/8"D.
|
Aft-Deck Shower System from ATTWOOD
This compact hot/cold shower stores neatly in its own compartment on the stern or in the head. Includes a handheld shower spray head with shutoff, 6' hose, hot/cold water controls and a cover. Easily hooked into your freshwater system. Compartment is drilled for six #8 fasteners. Material: High-impact plastic . Dimensions: 9-1/2"H x 5"W x 2-1/4"D . Hose Size: 6'L . Port Sizes: 1/2" NPT .
|
Chrysler Outboard 1962-1984, 1-4 Cyl., 3.5-150 HP from SELOC PUBLICATIONS
SELOC Marine tune-up and repair manuals provide the most comprehensive, authoritative information available for outboard, inboard and stern-drive engines, as well as personal watercraft. Designed and written to serve the needs of the professional mechanic, do-it-yourself boat enthusiast, instructor and student, these manuals are based on actual teardowns done by Seloc’s editors/authors in our on-site facility. , 3. 5-150 HP from 1962-1984. Hundreds of exploded drawings, photographs and tables .
|
|
from HARKEN, 8oz, SWL from HARKEN, from RONSTAN, 1, SWL, 1-1, 4" from SEAFIT
|
|
Home -> Engine Systems -> Engine Parts->Standard Spin-On Replacement Elements
For Racor Spin-On Series Diesel Fuel Filter/Water Separators.
Part No: R24SUL
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Fuel & Air Filters->Aqua View Replacement Filter Element & Bowl
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. Today’s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage.
Part No: 18-7920
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Retail Packs & Kits->Machine Bolts, Hex Head, Bulk Packs
Type 18-8 stainless steel.
Part No: 30109C
|
|
|
|
Home -> Plumbing -> Bilge Pumps -> Bilge Pump Switches
Converts any Attwood or competitive model to automatic operation. Fully sealed and isolated from moisture and shock. Test knob for manual checks . Contains no mercury . Sold without a cover .
Part No: 99W 4202-7
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->Bullet Blocks
Available in a wide range of designs, bullet blocks are the foundation of the Harken line, and are adaptable to almost all control line applications. Ideal for cunninghams, vangs, outhauls, traveler controls, spinnaker controls, barberhaulers, etc. Where applicable, blocks use #10 fasteners. Sheave: Delrin® . Ball Bearings: Delrin® . Sheave Size: 1 1/8" (29mm) . Line Dia: 5/16" max. . Cheek Material/Finish: Plastic with stainless strap . Cleat: 094, 095, 291- 423 Carbo-Cam® .
Part No: 085
|
|
|
|
Home -> Sailboat -> Blocks->Micro Blocks
Extremely lightweight, free running blocks. Designed for any number of uses on dinghies and for lightly-loaded control lines on boats of all sizes (inside masts and booms, lead car returns, tackle, etc. ). Where applicable, blocks use #10 fasteners. Sheave: Delrin® . Ball Bearings: Delrin® . Sheave Size 7/8" (22mm) . Line Dia: 1/4" max. . Cheek Material/Finish: Polished 316 stainless . Shackle/Strap Type: Fixed loop, loop with shackle .
Part No: 229
|
|
|
|
Home -> Engine Systems -> Steering Systems->TFXtreme 4300 BC Performance Cables
TfXtreme's unique design assures smoothness and efficiency–with hardly any lost motion–even in the longest and most complex cable routings! This means superior feel at the control, in any boat–performance that had been considered "impossible". TfXtreme achieves the "impossible". Patent-pending splined core to achieves the impossible–easy movement and minimum lost motion.
Part No: CC69207
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->Series 20 Blocks
Two-stage bearing system with stainless-steel ball bearings handles very high safe working loads. Designed for small diameter, high-tech line on high-performance dinghies and control lines on sport and race boats. Each double and triple block offers a formed loop head and extra shackle for mounting versatility. Sheave: Acetal plastic. Sheave Size: 3/4" (20mm). Line Diameter: 1/4" max. Cheek Material/Finish: Stainless and textured fiber-reinforced Zytel.
Part No: RF20312
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->40mm Carbo AirBlocks®
From the folks who invented ball bearing blocks, this line of blocks boasts an excellent strength-to-weight ratio. 29mm doubles and triples feature a U-lock to hold the swivel in the front or side position, or allow it to spin freely. Use the 40mm blocks for jib and mainsheet systems on high-performance dinghies, and for high-load control lines on small keelboats. The 57mm blocks have an enormous working range that makes them ideal for main and jib sheets, spinnaker halyards and control lines.
Part No: 2655
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Brass Phillips Oval Head Screws - Bulk Packs
Brass screws are intended for brass fittings and decorative use.
Part No: 3118
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->Brass Wood Screws, Phillips Flat Head, Bulk Packs
Brass screws are intended for brass fittings and decorative use.
Part No: 2742
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Battcar Batten Traveler Systems, System A Components
Add a lazy jack system, and raising or lowering your mainsail becomes a single person operation. Battcar systems also improve sailing performance, because they do not require the sail to be cut flat, or reduce the size of the roach, as with other systems. They make mainsail handling safer, by allowing you to raise or lower the sail with practically no effort at all, even with the sail powered up. At the inboard end of every batten, special ball bearing or slider Battcars move along the track.
Part No: 3809
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Battcar Batten Traveler Systems, System A Components
Add a lazy jack system, and raising or lowering your mainsail becomes a single person operation. Battcar systems also improve sailing performance, because they do not require the sail to be cut flat, or reduce the size of the roach, as with other systems. They make mainsail handling safer, by allowing you to raise or lower the sail with practically no effort at all, even with the sail powered up. At the inboard end of every batten, special ball bearing or slider Battcars move along the track.
Part No: 3810
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Battcar Batten Traveler Systems, System A Components
Add a lazy jack system, and raising or lowering your mainsail becomes a single person operation. Battcar systems also improve sailing performance, because they do not require the sail to be cut flat, or reduce the size of the roach, as with other systems. They make mainsail handling safer, by allowing you to raise or lower the sail with practically no effort at all, even with the sail powered up. At the inboard end of every batten, special ball bearing or slider Battcars move along the track.
Part No: 3808
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->29mm Carbo AirBlocks®
From the folks who invented ball bearing blocks, this line of blocks boasts an excellent strength-to-weight ratio. 29mm doubles and triples feature a U-lock to hold the swivel in the front or side position, or allow it to spin freely. Use the 40mm blocks for jib and mainsheet systems on high-performance dinghies, and for high-load control lines on small keelboats. The 57mm blocks have an enormous working range that makes them ideal for main and jib sheets, spinnaker halyards and control lines.
Part No: 342
|
|
|
|
Home -> Sailboat -> Headsail Furling -> Furling Accessories->Carbo Furling Lead Block Assemblies
These stanchion lead blocks have free-rolling ball bearings to lead line aft for safe furling from the cockpit. Use the 7401 40mm block on the bow pulpit as an inboard lead. The 7402 features a ratchet to control spooling when unfurling. The 7401 and 7402 have ball and socket bases to align blocks for smooth leads aft. The 7403 has a 29mm sheave and allows the furling line to travel outboard of the stanchion to keep the side deck clear. Mounts to stanchion with a four-screw clamp.
Part No: 7401
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Red Bronze Couplings
Red Bronze Couplings.
Part No: 479660
|
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->Silicon Bronze Machine Bolts - Hex Head - Bulk Packs
Silicon Bronze - the generic term used for various types of copper-silicon alloys. The properties of the alloy; a high percentage of copper, and small amounts of silicon, manganese or aluminum added for strength.
Part No: 2273B
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Red Bronze Couplings
Red Bronze Couplings.
Part No: 479659
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->Brass Wood Screws – Slotted Round Head – Bulk Pack
Brass screws are intended for brass fittings and decorative use.
Part No: 1888
|
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Fine Thread Machine Bolts - Hex Head - Bulk Packs
Type 18-8 stainless steel.
Part No: 35B
|
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->Bronze Frearson (R & P) Flat Head Wood Screws - Bulk Packs
Silicon Bronze - the generic term used for various types of copper-silicon alloys. The properties of the alloy; a high percentage of copper, and small amounts of silicon, manganese or aluminum added for strength.
Part No: 2205A
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->316 Lock Washers - Bulk Packs
Pack quantities range from 25 to 100 count.
Part No: 31426B
|
|
|
|
Home -> Anchor & Docking -> Anchor Line & Dock Line->Prespliced Double Braid Nylon Dock Line
Give your boat a sharp, well-kept look! This is the strongest and easiest-to-handle line you can buy that stays flexible throughout its service life. The core and cover is constructed from the highest quality treated nylon. Our Double Braid line offers controlled elongation and excellent abrasion resistance. Double braid lines stretch slightly less but are stronger than three-strand lines. Each line has a professionally spliced 12" eye with a heat-sealed bitter end. High elongation.
Part No: 4060-16-00035
|
|
|
|
Home -> Sailboat -> Blocks->57mm Carbo AirBlocks®
From the folks who invented ball bearing blocks, this line of blocks boasts an excellent strength-to-weight ratio. 29mm doubles and triples feature a U-lock to hold the swivel in the front or side position, or allow it to spin freely. Use the 40mm blocks for jib and mainsheet systems on high-performance dinghies, and for high-load control lines on small keelboats. The 57mm blocks have an enormous working range that makes them ideal for main and jib sheets, spinnaker halyards and control lines.
Part No: 2607
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->Brass Wood Screws - Slotted Oval Head - Bulk Pack
Brass screws are intended for brass fittings and decorative use.
Part No: 1847
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->#209 Extra Slow Hardener
Provides approximately twice the working time of 206 Slow Hardener. Not intended for clear coating. Mini Pump Kit is a must for precise metering of all group sizes of WEST SYSTEM resins and hardeners. Mix Ratio, Resin:Hardener Pot life at 72°F (22°C) at 95°F (35°C) Cure to a solid state at 72°F (22°C) at 95°F (35°C) Cure to maximum strength at 72°F Minimum recommended temperature Pumps 3:1 by volume (3.
Part No: 209-SA
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->30mm Synchro Control Blocks
Quality Lewmar blocks in compact 30mm size Lightweight 30mm blocks feature the same advanced materials and open design of Lewmar's 40mm blocks for high performance and reduced weight. The MRT (Metal Replacement Technology) sheaves, combined with the stainless steel central race and balls, deliver the ultimate efficiency and weight advantage. Sheave: MRT Composite reinforced plastic Ball Bearings: Stainless-steel central race and balls Sheave Size: 1-1/16" (30mm) Line Dia.
Part No: 29901325
|
|
|
|
Home -> Anchor & Docking -> Windlasses & Rollers->Foot Switches
Lewmar Foot Swithces.
Part No: 229091
|
|
|
|
|
Home -> Anchor & Docking -> Windlasses & Rollers->Foot Switches
Lewmar Foot Swithces.
Part No: 68000616
|
|
|
