Top Sellers
Starboard Side Green Vertical-Mount Side Navigation Light, 3-5/8”H x 4-1/8”W from PERKO
European style Series 170 side navigational lights are certified for use on powerboats and sailboats up to 20m (or 65. 6') with 12V electrical systems. Red or green lenses with 12V bulbs included. 2nm visibility range. Case Material: Chrome-plated brass tops with black plastic bases . Mounting Hardware: #10 FHMS (sold separately) . Volts: 12V . Draw: 0. 97A . Replacement Bulb: Model 8646853 .
|
Horizontal Chrome/Brass Masthead Light, Boat Size to 12m (39'4"), 2-3/8"H x 7/8"W from PERKO
For powerboats and sailboats. Chrome-plated brass or chrome-plated zinc. Mounting Hardware: #4 FHMS Volts: 12V Draw: 0.
|
Vertical Sidelights, White from PERKO
For powerboats and sailboats less than 20m or 65. 6'. Plastic frames with ultrasonically welded lenses and gasketed plastic bases. 2nm visibility. Per pair, except bi-color. Case Material: Plastic . Case Dimensions: 3-1/2"L x 2-1/4"W x 13/16"H . Mounting Hardware: #8 FHMS (sold separately) . Volts: 12V . Draw: 0. 7A .
|
Stainless-Steel Compact Electric Horn - Double from AFI
Mini Twin Electric Horn Excellent for use in the marine environment. totally seal sound units have type 304 stainless cover, diaphragm and mounting brackets. Material: 304 stainless cover & horn diaphragm. Loudness dB: 106 dB. Approvals: ABYC for boats up to 20 meters. Dimensions: 3"L x 8"W x 1 3/4"H. Power Requirements: 12V. Draw: 3A @ 12V (max. 6A). Fundamental frequency: 490±20/440±20.
|
500 RC Windlass, 600lb. Max. Pull, Boat Length 35', 1/4"HT Chain, 1/2" Rope Rode Size, 62'–Chain; 45'–Rope Speed Up/Min., 60' Speed Down/Min., 60A–75A @12V Draw from MAXWELL
These low-profile windlasses feature a patented tension system that maintains resistance required to feed chain/rope rode into the locker instead of jamming it in the windlass. Designed for easy installation, the motor can be oriented in any of 12 positions below decks. Two pieces bolt together quickly. Gasketed, watertight base. For decks to 2 3/4" thick. Capstan models and extra-long shafts for thick decks are available by Special Order. Style: Vertical . Rode Type: Rope/chain .
|
Stern Three-Mile LED Light from ATTWOOD
Energy-efficient three-mile 12" pole anchor/masthead and transom lights. Solid stainless hardware for corrosion resistance and unsurpassed polished appearance. Pole light is direct replacement for Perko 1181DPO CHR used on most Sea Ray boats. Case Material: Stainless steel . Mounting Hardware: Not included . Pole Diameter: 3/4" . Pole Material: Anodized aluminum . Draw: 0. 15A (1. 8W@12V DC) . Volts: 12V DC.
|
500gph 12V Bilge Pump, 1.9A Draw at 12V DC, 3/4" Port, 4"H x 2-3/8"W from RULE INDUSTRIES
An internal computer chip cycles these pumps on every 2. 5 minutes, then quickly shuts them down if no water is detected. Built-in strainer bases snap off to make cleaning easy. Completely submersible, rust-proof, corrosion-proof and ignition-protected. Three-way wiring enables connection to a switch for manual override or indicator light. Small 500gph pump is designed to handle spray and rainwater. Built-In Switch: Yes, cycles every 2. 5 min.
|
500gph 12V Bilge Pump, 3/4" Port, 1.9A Draw, 2.5A Fuse, 3-1/2"H x 2-3/8"W from RULE INDUSTRIES
Tough and reliable at a value price Great performance at a value price, Rule submersible pumps are the first choice for many boat manufacturers. Their motors feature stainless-steel shafts, water cooling and a vibration-free centrifugal impeller that won’t burn out if run dry. Strainer bases can easily be snapped off for cleaning. Each pump requires a panel switch for manual operation or a float switch for automatic operation. Select from 12V, 24V and 32V models. Can run dry without damage.
|
Power Bubbles 12V DC Aerator from MARINE METALS
This system runs on low current as it's dual bellows aerate up to 2L per minute of air. It saturates circulating water with oxygen. Double discharge allows aeration of one or two livewells. Increases flow capacity. Includes 10' of air tubing. Two large airstones allow the pump to be mounted in any protected area. Suitable for fresh or saltwater. Two anti-siphon valves protect pump against water intrusion. Quietly operates with solid-state circuits. Draw: 1/4A at 12V DC.
|
12V Macerator Pump, 14A Draw from SHURFLO
Designed specifically for the marine environment with run dry premium impeller technology. 5" male thread to screw directly onto a tank flange. Type: Macerating flexible impeller gpm: 13 Macerates: Yes Self-Prime: 5' Material: Nylon body, nitrile impeller, stainless wear plate Port Sizes: Inlet: 1-1/2" barb and 1-1/2" NPT male; Outlet: 1" hose barb Dimensions: 3-3/8"H x 4-5/8"W x 11"L Innovative blade design ensures problem-free pumping Inlet port has both a 1.
|
Whale Gulper 220 Pump, 12V DC, Draw: 2.4A from WHALE PUMPS
Use this 3. Large 3/4" inlet and outlet valves are cut at 45° angles to minimize flow restriction. Ports rotate to the position you need to facilitate hose connections and it mounts vertically or horizontally—making installation a snap! It can run dry for extended periods without burnout and boasts a large diaphragm that generates up to 13' of lift. Rubber mounting feet reduce noise. Features: Will run dry without damage and pump a mixture of air and water . Large single diaphragm .
|
12V Reversible Flo-Master Vane Pump from GROCO
Rigid-vane pumps for pumping water, oil or diesel. Positive-displacement pump is self-priming to 2’. Long-lasting, continuous-duty, ignition-protected motor has ball bearings and a #316 stainless-steel shaft Application: General light to intermittent duty utility pumping . Gallons Per Minute: 6. 5 (oil) . Material: Bronze pumphead, stainless shaft . Port Sizes: Male garden hose or 1/2" female NPT inlet & outlet . Dimensions: 3 3/8"H x 4 3/8"W x 7 1/2"L .
|
Deck Mate 25 Boat Anchor Windlass from POWERWINCH
Compact, deck-mounted windlass has power up/free-fall down capabilities and includes a built in light for added convenience. With low power draw and free fall deployment, this anchor winch puts less stress on your battery for longer battery life. Its small footprint takes up less deck space to mount and the spur gear train allows fast retrieval speeds and minimal current draw. Gear feature prevents rope from over running during anchor deployment. Style: Horizontal . Boat Length: Up to 25'' .
|
Replacement Pressure Switch from GROCO
Paragon Jr. Pressure Water System The Paragon Jr. can handle the demands of multiple outlets, either as a saltwater washdown or freshwater system pump. Includes a 12V bronze rotary pump, pressure gauge, strainer and PST-1 accumulator tank. Solid-state dry-tank shutoff Operates between 20 and 40psi For boats to 45' 7 GPM Draw: 30A starting, 26A running Self Prime: 6' Dimensions: 12"L x 7"H x 8"dia. (pump) 12"L x 8"dia.
|
LED, 12V 30W from DR. LED
Medium screw-base (Edison E26/E27) LED bulbs offer an energy-saving solution to incandescent lighting. Soothing warm white light. Offer low power draw and ultra-long service life: 50,000 hours. Impact and shock resistant. 8-18V DC. . U. S. made high flux LED. *Click here for the Dr.
|
|
18A Draw@12V, 2A 12V Draw, TriAnchor, Port Running Light, 75"H x 2, 4-1
|
|
Home -> Electrical -> Meters & Distribution -> Distribution Panels->AC Source Selection Rotary Switch Panels
Blue Sea Systems designs innovative, reliable, superior quality electrical system products. Blue Sea Systems products are tested aboard the company's boat to ensure reliability and ease of use in real world conditions. This results in the delivery of innovative, reliable electrical products that exceed the quality standards of other companies. Blue Sea Systems' in-house lab is used to load test and thermal test products to ensure they will perform under marine conditions.
Part No: 8363
|
|
|
|
Home -> Seating & Covers -> Seating->Pontoon Corner Lounge, Right Side
These L-shaped bench seats make valuable use of those empty corners on your pontoon boat. Fully enclosed storage in seat. Heavy duty marine-grade vinyl . High-density Polyurethane foam. 100% plastic frame construction. Measures: 27".
Part No: BM132OVT-07/15/
|
|
|
|
Home -> Engine Systems -> Engine Parts->Trim Cylinders
Sierra Power Trim Cylinders feature a high-gloss finish, excellent corrosion resistance and a marine-grade stainless-steel shaft. Tested for safety and durability. Click to view Trim Cylinder Application Chart (PDF).
Part No: 18-2427
|
|
|
|
Home -> Seating & Covers -> Seating
Two-position backrest makes it easy to face your guests or face the helm with a quick flip of the deep tufted, pillow back. The sturdy roto molded plastic frame topped with a hinged seat cushion adds precious storage and seating comfort in one. marine grade vinyl with matching double topstitched design boasts reliability and a uniform look for years to come. Application: Pontoon seating and storage . Frame Material: Roto molded plastic . Upholstery Material: Heavy-duty 30oz. Dimensions: 37.
Part No: BM981-842
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting -> Navigation Lights->LED Navigation Lights
Lopolights are available for boats up to 164' (50m). Each light is individually tested and certified, concluding with a 36-hour Reliability Stress Screening so you can just install it and forget it! Why should you buy Lopolights? • Completely waterproof (rated IP68+ submersible): Interior is fully filled and sealed with special epoxy resin. • Rated for over 50,000 hours of operation. Not damaged by vibration. • Low power consumption: Less than 30% of the draw of a standard incandescent lamp.
Part No: 200-010
|
|
|
|
Home -> Seating & Covers -> Seating->Premium Pontoon 70Qt. Cooler Flip Flop Seat
Complementing the Premium Pontoon line of boat seats with the same top-of-the-line construction, you can strategically place this two-position seat near the cockpit table for enjoying your favorite meal, then reverse the backrest to visit with your guests. The hinged seat cushion opens for more storage and doubles as a 70qt. Pillow back and seat offer superior comfort. Application: Pontoon boat seating and storage Frame . Material: Roto-molded plastic . Upholstery Material: Heavy-duty 30oz.
Part No: BM990-842
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Additives & Fiberglass->#407 Low Density Filler
Easy-to-sand, microballon-based filler A blended microballoon-based filler. Combine with 105 Epoxy Resin to make fairing putties that are easy to sand or carve. Relatively strong on a strength-to-weight basis.
Part No: 407-B
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting->LED Navigation Lights
All lights are USCG Certified for 2 nautical miles and meet COLREGS '72 standard for boats up to 50 meters (165') for running lights, and sailboats up to 20 meters (65') for Anchor and TriAnchor lights. Each light is individually tested under water to assure waterproof performance. Integrated DC-DC power supply maintains consistent brightness over a wide operating voltage range. Mounting brackets sold separately. LEDs are rated to 50,000 hours. Mounting Hardware: 6-32 screw inserts in base.
Part No: LXAAGREEN
|
|
|
|
Home -> Seating & Covers -> Seating->Premium Pontoon 70Qt. Cooler Flip Flop Seat
Complementing the Premium Pontoon line of boat seats with the same top-of-the-line construction, you can strategically place this two-position seat near the cockpit table for enjoying your favorite meal, then reverse the backrest to visit with your guests. The hinged seat cushion opens for more storage and doubles as a 70qt. Pillow back and seat offer superior comfort. Application: Pontoon boat seating and storage Frame . Material: Roto-molded plastic . Upholstery Material: Heavy-duty 30oz.
Part No: BM990-840
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting->LED Navigation Lights
All lights are USCG Certified for 2 nautical miles and meet COLREGS '72 standard for boats up to 50 meters (165') for running lights, and sailboats up to 20 meters (65') for Anchor and TriAnchor lights. Each light is individually tested under water to assure waterproof performance. Integrated DC-DC power supply maintains consistent brightness over a wide operating voltage range. Mounting brackets sold separately. LEDs are rated to 50,000 hours. Mounting Hardware: 6-32 screw inserts in base.
Part No: LXTA
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting->LED Navigation Lights
All lights are USCG Certified for 2 nautical miles and meet COLREGS '72 standard for boats up to 50 meters (165') for running lights, and sailboats up to 20 meters (65') for Anchor and TriAnchor lights. Each light is individually tested under water to assure waterproof performance. Integrated DC-DC power supply maintains consistent brightness over a wide operating voltage range. Mounting brackets sold separately. LEDs are rated to 50,000 hours. Mounting Hardware: 6-32 screw inserts in base.
Part No: LXAARED
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting->LED Navigation Lights
All lights are USCG Certified for 2 nautical miles and meet COLREGS '72 standard for boats up to 50 meters (165') for running lights, and sailboats up to 20 meters (65') for Anchor and TriAnchor lights. Each light is individually tested under water to assure waterproof performance. Integrated DC-DC power supply maintains consistent brightness over a wide operating voltage range. Mounting brackets sold separately. LEDs are rated to 50,000 hours. Mounting Hardware: 6-32 screw inserts in base.
Part No: LXTA-S
|
|
|
|
Home -> Cabin & Galley -> Refrigeration & Coolers
Especially well suited for use in high ambient temperatures and for large volume boxes. Cooling volumes up to approx. 7 cu. ft. with 2” of insulation/8. 9 cu. ft. with 3” of insulation. High-performance forced air evaporator with fan. Dimensions: 8. 66”L (220 mm) x 10.
Part No: VD-15
|
|
|
|
Home -> Navigation -> Compasses & Navigation Tools->Navigator Compasses
The large, 4 1/2" apparent size PowerDamp dial on flat card models is easy to read and rock steady. Precision works are protected by fiberglass-reinforced, high-impact composite cases. The binnacle mount model is housed in brushed stainless steel. All feature PowerDamp cards, sapphire jewels and pivots, internal gimbal, built-in compensator magnets, 45° lubberlines dual 12V DC night lighting and movable sun shields (except BN-202). Apparent Card Dia. Case Material: Reinforced polymer .
Part No: DNB-200
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Big Boat Traveler Cars & Accessories
Big Boat Captive Ball Traveler Cars are built to handle high loads on boats from 32 to 50 ft. , and up to 70ft. Machined aluminum Hardkote-anodized races permit Torlon® bearings to transition smoothly from the active to return race for smooth trimming or easing. Stainless steel wire guides keep the balls captive when the car is off the track. Pivoting shackle/toggle cars have low pivot points to handle non-vertical loads. Blocks attach directly to the toggle for a low-profile, compact system.
Part No: 3173
|
|
|
|
3-Year DOP Fr 3500 To 3999. 99|3-Year DOP Fr 3500 To 3999.
Part No: 2 DOP 3500-3999
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Swiveling Connectors
Swiveling Connectors designed and intended for halyard connections Will reduce weight aloft for halyards. Dynex loops are 80% lighter than traditional stainless shackles, but can take the same loads. Use high-load Polymer swivels for easy rotation, and do not jam.
Part No: 14-8S
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Big Boat Traveler Cars & Accessories
Big Boat Captive Ball Traveler Cars are built to handle high loads on boats from 32 to 50 ft. , and up to 70ft. Machined aluminum Hardkote-anodized races permit Torlon® bearings to transition smoothly from the active to return race for smooth trimming or easing. Stainless steel wire guides keep the balls captive when the car is off the track. Pivoting shackle/toggle cars have low pivot points to handle non-vertical loads. Blocks attach directly to the toggle for a low-profile, compact system.
Part No: 3170
|
|
|
|
Home -> Sailboat -> Downwind Poles & Cars->Heavy-Duty Telescoping Twist-Lock Poles
These telescoping whisker poles are heavy-duty two-section and three-section aluminum spars which can be extended to lengths up to 17' and securely locked in position by an internal twist lock device. Poles feature self-latching Ultra Series™ fittings on the inboard and outboard ends. Aluminum tubing. End Fitting Inboard: UPX. End Fitting Outboard: UPX.
Part No: 407101
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang
Description: High-beam . Length: 11' 9-3/4" . Hole spacing: Slide Bolt . Weight: 402oz. . Fasteners: 5/16" HH . Endstop/trim cap: 562 / 3158 .
Part No: 3156.3.6M
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains
**RebuildKit-Housing Gimble|**RebuildKit-Housing Gimble.
Part No: 18-8311
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Topside Paint->U-2964 Brushing Catalyst
U-2964 brushing catalyst for gloss topcoats.
Part No: U-2964 1/2GAL
|
|
|
|
Home -> Seating & Covers -> Seating->Pontoon Corner Lounge, Left Side
These L-shaped bench seats make valuable use of those empty corners on your pontoon boat. Fully enclosed storage in seat. Heavy duty marine-grade vinyl . High-density Polyurethane foam. 100% plastic frame construction. Measures: 27".
Part No: BM131OVT-207
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Marine AF 25 - TBT Free Ablative Antifouling, (Commercial/Industrial Only)
Marine AF 25 - TBT Free Ablative Antifouling - Commercial/Industrial Only Low copper load ablative antifouling. Used for fouling control on coastal vessels requiring shorter drydock intervals in low fouling waters. Used for fouling control on flat bottoms of deep sea vessels Specifically designed for Steel and for (select styles) aluminum ships.
Part No: 2502-5G
|
|
|
|
Home -> Sailboat -> Rigging Products->Professional Wire Cutters
Extremely durable Swiss-made Felco precision cable cutters have unique triangular jaws that cut clean, without leaving frayed ends. All models have forged aluminum handles that are lightweight, yet incredibly strong.
Part No: C16
|
|
|
|
A stationary carbon flange is held in contact against a stainless flange, which rotates with the prop shaft. The high-density carbon/graphite flange is attached to the boat by a nitrile bellows which, with the help of water pressure, produces a constant pressure between the carbon and stainless flanges. This mechanical seal is impervious to engine motion and vibration, creating a 100% watertight and maintenance-free seal.
Part No: 02-112-300
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting->Beamer Remote-Controlled Searchlights
The Beamer’s 100W halogen bulb sends a piercing light through haze and rain, illuminating buoys up to a mile away. The wireless remote can turn the light on, off, swivel it through 355°, tilt it 75° from up to 150' away. All Beamers and console controls are water-resistant, easy to install and mount in any position. Wired Remotes include a 15', 7-wire harness with 22AWG control wires attached to a console control panel. Beamer Spot/Flood with Wired Remote: 100W Spotlight with 55W floodlight.
Part No: 502A
|
|
|
|
Home -> Seating & Covers -> Seating->Pontoon Corner Lounge, Left Side
These L-shaped bench seats make valuable use of those empty corners on your pontoon boat. Fully enclosed storage in seat. Heavy duty marine-grade vinyl . High-density Polyurethane foam. 100% plastic frame construction. Measures: 27".
Part No: BM131OVT-204
|
|
|
|
Home -> Safety -> Fire Extinguishers -> Fixed Extinguishers->Automatic Engine Shutdown Systems
ELS Series: Designed for Today’s Electronic Engines The ELS Series of Engine Shutdowns were developed to address low current, electronically controlled engines. Engine circuit relays feature an operating range of 10µA to 2 amps. Auxiliary relays have an operating range of 100 mA to 10 amps for the shutdown of generators, dampers, louvers, and other types of related engine room equipment. All ELS models are 12/24/32 VDC compatible with a choice of either a round or square display.
Part No: ELS-3510-01
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring -> Mooring Gear->Sur-Moor Taper Buoy
This buoy's taper shape design places more flotation area at the waterline creating a higher visibility mooring. Hard-skin buoys feature a reflective blue band to increase visibility and a Tube-Through-The-Center design. Hardware not included.
Part No: 46730
|
|
|