Top Sellers
Hose Adapter, From 1-1/8" to 3/4"-5/8" from RULE INDUSTRIES
#69 is stepped & adapts from 1-1/8" to 3/4" - 5/8" #57 is an elbow & adapts from 1-1/8" to 1" NPT #67 adapts from 1-1/2" to 1-1/8".
|
Roller Shaft Cap Nuts Only - 1/2", Pack of 8 from C E SMITH
Roller Size Length Shaft Diameter Shafts and Nuts 4" 5 1/4" 1/2" 4" 5 1/4" 5/8" 5" 6 1/4" 1/2" 5" 6 1/4" 5/8" 8" 9 1/4" 5/8" 10" 11 1/8" 5/8" 11" 12 3/4" 1/2" 12" 13 1/2" 5/8" Shaft Only 18" 19" 5/8" Cap Nuts Only Packs of 8.
|
60mm Racing Fiddle Block with Becket & Cleat, 882lb. SWL, 12.4oz. from LEWMAR
For chafe-free, low-friction tackles. Sheave: Anodized aluminum alloy . Ball Bearings: Delrin® . Sheave Size: 2-3/8" (60mm) & 1-5/8" (40mm) . Line Dia. : 3/8" max. . Cheek Material/Finish: Anodized aluminum alloy . Shackle/Strap Type: Swivel with three-way locking, drilled-out head . Cleat: Model with cleat: adjustable arm, aluminum cam cleat .
|
Removable Chafe Gear Wrap, 4', for 3/4"– 7/8" Line from MEGAFEND
Protect your docklines from chafe and extend their life with attractive ballistic nylon sleeves featuring easy Velcro™ installation/removal. Ends include 1/8"dia. nylon cords that attach to line to prevent slip. Finished edges create an aesthetically pleasing, uniform look.
|
Fold-Down Transom Ladder from GARELICK
Great for boats with small transoms. Includes a unique bracket for attaching to most angled or curved transoms in an area only 12"W x 6. 5"H. Both steps fold down for boarding.
|
Anchor Chain Tensioner from JOHNSON, C.S.
Holds chain up to 5/16" firmly to keep your anchor quiet on its roller. A quick-release pin holds the welded handle securely in a tensioned position. 316 stainless steel.
|
Delrin Sheave, 1/2" Max. Line Dia., 1-7/16" OD, 3/8" ID, 5/8" Width from SCHAEFER
Schaefer sheaves are designed to be compatible with Schaefer products, and are not intended for use in other manufacturer's blocks. Delrin sheaves are injection molded with UV inhibitors and monitored molding cycles for a stronger product.
|
Series 60 Orbit Block, Single Light-Load, 2-3/8" Sheave Size, 1,710lb. SWL, 4.7oz. from RONSTAN
These exceptionally strong blocks feature the performance Orbit sheave with captive Acetal ball bearings for side thrust loads, eliminating the need for side retainer plates. The 75mm webbing block (RF79107) can be used where swivel head and shackle attachment is not required to achieve further weight savings. Sheave Size: 2-3/8" (60mm) or 3" (75mm). Line Diameter: Series 60: 1/2" (12mm), Series 75: 9/16" (14mm). Cheek Material/Finish: Anodized aluminum.
|
1/4" NPT X 3/8" Brass hose barb from MOELLER
1/4 NPT X 3/8" Brass Hose barbs with male threads.
|
3/8" NPT Aluminum hose barb from MOELLER
3/8 NPT X 3/8" Aluminum hose barb with male threads.
|
Spring Loaded Ring Pull, Square 2 x 2 3/8" from WEST MARINE
Spring-loaded ring immediately returns to flush when released. Type 304 stainless steel . Size: 2 x 2 3/8" .
|
1/8" Endura 12 Dyneema Single Braid, 2,100lb. Breaking Strength from NEW ENGLAND ROPES
Extremely high strength-to-weight ratio! Excellent strength-to-weight ratio, ultra-low elongation, excellent flexibility and wet/dry strength retention, torque-free, and it floats. Constructed from Dyneema SK-75, Endura 12 has a proprietary urethane coating for improved abrasion resistance. Best Use: Halyards, sheets, low-stretch control lines, guys, slings/hoisting ropes . Construction: 12-strand single braid . Core Fiber/Construction: Coated Dyneema SK-75 . 0% at 30% of breaking strength .
|
CARB GASKET KIT from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Yamaha Carb Kit from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Replaces OMC P/N 378444 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
|
from SCHAEFER, 3' from TAYLOR, 8 from U, 12 from U, Anode from SIERRA
|
|
Home -> Fasteners -> Mechanical Fasteners -> Retail Packs & Kits->Machine Screws, Phillips Pan Head
Type 18-8 stainless steel.
Part No: 0824BP
|
|
|
|
Home -> Engine Systems -> Steering Systems -> Hydraulic Steering
Can also be used to reduce the helm's protrusion by a width equal to the thickness of the dash.
Part No: HA5418
|
|
|
|
Home -> Cordage -> Rigging Products->Lifeline Cushions
The patented design of these lifeline cushions puts them a step above the average backrest. They’re extremely tough and constructed from sturdy foam covered by abrasion-resistant woven polyester. Simply thread your lifeline through the center of the cushion and you’re set. Will not rot in the sun. Easy to clean with liquid soap. Color: White . Material: Polyester cover, foam core . Quantity: Pair .
Part No: LC150.30
|
|
|
|
Home -> Watersports -> Tow Ropes & Accessories -> Watersport Accessories->Neoprene Comfo Sport Boots
High cut 5mm neoprene boots have a noncorrosive zipper and are easy to get on and off. Rubber toe and heel caps .
Part No: 260495
|
|
|
|
Home -> Engine Systems -> Engine Instruments
**Sensor-Oil Pressure|**Sensor-Oil Pressure.
Part No: OP24301
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Fenders->Third Mate Fenders
We created this simple, less expensive fender for those of us (the vast majority) who don't hang our fenders horizontally. We eliminated one eye, and constructed our fender with premium vinyl that is soft, flexible and durable. The construction process yields an extremely uniform wall thickness with ribs to minimize roll. Offers the same protection as higher-priced fenders. A needle valve permits precise pressure regulation.
Part No: 31018
|
|
|
|
Home -> Cordage -> Anchor Line & Dock Line -> Dock Line->Prespliced Double Braid Nylon Dock Line
Give your boat a sharp, well-kept look! This is the strongest and easiest-to-handle line you can buy that stays flexible throughout its service life. The core and cover is constructed from the highest quality treated nylon. Our Double Braid line offers controlled elongation and excellent abrasion resistance. Double braid lines stretch slightly less but are stronger than three-strand lines. Each line has a professionally spliced 12" eye with a heat-sealed bitter end. High elongation.
Part No: 4064-16-00025
|
|
|
|
Home -> Seating & Covers -> Carpet, Vinyl & Canvas->Sungard® , Marine Grade Upholstery Thread
Ultra-Violet Stable Thread for use on vinyl, canvas and endless other outdoor uses. An excellent match for Sunbrella fabrics Will not rot. Many popular colors available. 1" diameter bobbin.
Part No: 886708
|
|
|
|
|
Home -> Seating & Covers -> Carpet, Vinyl & Canvas->Sungard® , Marine Grade Upholstery Thread
Ultra-Violet Stable Thread for use on vinyl, canvas and endless other outdoor uses. An excellent match for Sunbrella fabrics Will not rot. Many popular colors available. 1" diameter bobbin.
Part No: 886718
|
|
|
|
Home -> Plumbing -> Bilge Pumps -> Bilge Pump Switches
On-demand use from a water-resistant toggle and stainless steel faceplate.
Part No: 49PWC
|
|
|
|
INVISIBILITY! If the fish can’t see it…it can’t get spooked. The scientists at Pure Fishing have spent years developing the perfect formula for a family of lines that deliver ultimate sensitivity and low visibility. Berkley® FireLine® Crystal If it were any clearer it, it would be a mono. First translucent superline for near invisibility underwater.
Part No: 1123895
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting -> Navigation Lights->#3562 Navigation Lights for Boats to 39'4" (12 meters)
Compact navigation lights with modern styling. Completely waterproof, yet vented. Break-resistant polycarbonate housing snaps together without screws. Bulb snaps into a holder supported above condensing surfaces. Acrylic lens. 10W bulbs in colored lenses are visible 1nm. ; stern light is visible 2nm. Masthead light is visible 2nm. Case Material: Polycarbonate . Case Dimensions: 3"H x 2. 5"W x 2"L .
Part No: 003562005
|
|
|
|
Home -> Seating & Covers -> Carpet, Vinyl & Canvas->Non-Hazardous Carpet Glue
Non-flammable, solvent-free and completely waterproof after curing. For metal, wood, concrete or fiberglass. One gallon covers 90-120 sq.
Part No: 880532
|
|
|
|
|
Home -> Watersports -> Tow Ropes & Accessories -> Watersport Accessories->Neoprene Comfo Sport Boots
High cut 5mm neoprene boots have a noncorrosive zipper and are easy to get on and off. Rubber toe and heel caps .
Part No: 260515
|
|
|
|
Home -> Cabin & Galley -> Appliances & Cookware->Airtight Storage Canister Sets
Keep food fresh in these stackable, durable ”Storers” with airtight seals. The clip-toggle lid is designed for one-hand ease, to remove and replace the lid. Easy to clean. Set of three. Short set includes 0. 45L, 1L and 2L sizes. Tall set includes 1. 2L, 2. 4 and 4.
Part No: 5133 WHITE
|
|
|
|
Home -> Engine Systems -> Motor Mounts -> Motor Mounts->Outboard Locks
Help make your outboard less attractive to thieves, and also keep it from vibrating loose while running. The vinyl-clad steel tube slides over the mounting screws and is secured with a hardened brass padlock. Padlock is recessed inside the tube to protect against cutting. Comes with two keys. *Fits: OMC 6-30hp, Merc/Mariner 8-25hp, Yamaha 9. 9-40hp, Suzuki 8-13hp.
Part No: 74036
|
|
|
|
Home -> Safety -> Flares & Signaling Devices -> Lights, Strobes & Distress
Combines a dazzlingly bright strobe and a focused-beam flashlight for working on deck at night. Ruggedly built to ensure reliable operation, both lights are powered by two AA batteries (not included). A positive three-position switch prevents accidental illumination, but care must be exercised to ensure that there is always enough battery power available to power the strobe in an emergency.
Part No: 1916
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers->Bearing Life Bearing Protectors
Permanent protection against water and dirt. A spring holds the axle grease under pressure, preventing temperature changes from creating a vacuum in the bearings and pulling in contaminants and water. Install in place of Dust Caps. Available in four sizes. Sizes for bearings under 2" include covers, above 2" do not. Covers available separately, including for 2. 328" bearing size.
Part No: BP232S0604
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains
**Anode|**Anode.
Part No: 18-6107
|
|
|
|
|
Home -> Seating & Covers -> Carpet, Vinyl & Canvas->Sungard® , Marine Grade Upholstery Thread
Ultra-Violet Stable Thread for use on vinyl, canvas and endless other outdoor uses. An excellent match for Sunbrella fabrics Will not rot. Many popular colors available. 1" diameter bobbin.
Part No: 886702
|
|
|
|
|
Home -> Seating & Covers -> Carpet, Vinyl & Canvas->Sungard® , Marine Grade Upholstery Thread
Ultra-Violet Stable Thread for use on vinyl, canvas and endless other outdoor uses. An excellent match for Sunbrella fabrics Will not rot. Many popular colors available. 1" diameter bobbin.
Part No: 886725
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting->Quasar Bi-Color Deck-Mount Lights
Smoothly contoured, these lights are designed for use on boats to 20m or 65. 6'. A single locking screw connects the cap and base for easy installation and service. Resin lenses are tuned for maximum visibility. Includes 8W festoon bulb. Case Material: Plastic resin Case Dimensions: 3"L x 2-1/4"W x 1-3/8"H Mounting Hardware: Three #10 screws (not included) or mount to optional 3300 series snap-on base Volts: 12V Draw: 0.
Part No: 3123-7
|
|
|
|
Home -> Engine Systems -> Engine Parts
Replaces: OMC 912766 Chrysler Inboard 4417375 Mercruiser 27-13709T For: Mercruiser 224 (3. 7L) CID Eng. , Eng.
Part No: 18-3878
|
|
|
|
Home -> Seating & Covers -> Covers & Biminis
Eliminate pooling water and collecting debris with under-cover support. Telescoping pole (28'' to 48'') props the cover up with a wide support on top, and guides 1'' webbing straps from bow to stern. Straps form a double ridge line under the cover. Straps attach to the stern with non-marring hooks.
Part No: 55741
|
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting -> Navigation Lights->#3562 Navigation Lights for Boats to 39'4" (12 meters)
Compact navigation lights with modern styling. Completely waterproof, yet vented. Break-resistant polycarbonate housing snaps together without screws. Bulb snaps into a holder supported above condensing surfaces. Acrylic lens. 10W bulbs in colored lenses are visible 1nm. ; stern light is visible 2nm. Masthead light is visible 2nm. Case Material: Polycarbonate . Case Dimensions: 3"H x 2. 5"W x 2"L .
Part No: 995004011
|
|
|
|
Home -> Watersports -> Skindiving Gear
The low-volume, two-window mask has easy-to-adjust buckles The Tropic Snorkel has a contoured shape , dry top to keep splash water out and an easy-clear purge valve The Rip Fins are a great multi-use kids' fin with adjustable straps for growing feet The soft foot pocket fits a range of sizes Blue.
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Emergency Cut-Off Switch
Add safety to older boats easily. In an emergency, a quick pull on the lanyard stops the engine, preventing accidental runaway. Installs directly into ignition line.
Part No: M-597-BP
|
|
|
|
Home -> Cabin & Galley -> Containers & Storage -> Containers, Boxes, Bins
The space saving folding design is also equipped with molded silicone fingers to adjust to the varying diameters of cans, cups, cozies and mugs. It also has a molded silicone "coaster" on the inside of the cover to reduce noise and to keep containers from sliding. Stainless steel mounting hardware is included. Nylon sound dampening washers for positioning between the unit and the hull. Packaged in a clear sealed clamshell with four color graphics and mounting instructions.
Part No: 2211-0
|
|
|
|
Home -> Engine Systems -> Engine Parts->Water Pump Impeller Repair Kits
Type A: Fits Merc/Mar 4hp (1-cyl), Model 75 (7. 5hp) and Model 110/9. 8hp when the water impeller ID measures 0. 456" Type B: Fits all Mercruiser Alpha One Generation II drives with serial number OD 469859 and above Type C: Fits Merc/Mar 6/8/9. 9hp 2-cycle outboards (USA OA197112 & above, BEL 9461526 & above), 15hp 2-cycle and 9.
Part No: 42038Q3
|
|
|
|
Home -> Sailboat -> Blocks->Series 303 Aluminum Blocks
Use as sheet control blocks on dinghies, or for control lines on larger boats. High-impact Delrin® sheaves turn on polished stainless steel spacers, so the cheeks won't squeeze or bind the sheave, even under extremely heavy loads. Head shackles are stamped stainless steel with clevis pin and cotter ring. Cheeks are black hard-coated anodized aluminum. Straps, headclips, shackles, and rivets are tumbled and polished stainless steel. Sheave: Delrin. Cheek Material/Finish: Aluminum.
Part No: 303-09
|
|
|
