Top Sellers
Roller Shaft Cap Nuts Only - 1/2", Pack of 8 from C E SMITH
Roller Size Length Shaft Diameter Shafts and Nuts 4" 5 1/4" 1/2" 4" 5 1/4" 5/8" 5" 6 1/4" 1/2" 5" 6 1/4" 5/8" 8" 9 1/4" 5/8" 10" 11 1/8" 5/8" 11" 12 3/4" 1/2" 12" 13 1/2" 5/8" Shaft Only 18" 19" 5/8" Cap Nuts Only Packs of 8.
|
Deck Fill, Gas, w/Key, 1-1/2" from WHITECAP INDUSTRIES
Stainless-steel deck fills with durable cast heads—not the thin stamped heads found on many imports. Gas, Diesel and Water fills have 1 1/2" openings. Waste fill has 2" opening. All connect to 1 1/2" hose, and include a stainless key. Material: Stainless . Attachment Method: 1 1/2" hose . Flange Diameter: 3" or 3 1/2" (waste) . Fasteners: Three #10 FHMS . Cutout Diameter: 1 5/8" .
|
PowerPro Lower Unit Gear Lube from WEST MARINE
An 80W90 synthetic gear lube that protects high-performance lower units in extreme operating conditions. Highly recommended for engines over 100hp. Meets or exceeds API MT-1 and GL-5 ratings.
|
Drill Pump Kit from JABSCO
The self-priming drill pump chucks into a standard 1/4" drill motor and pumps up to 3 1/2gpm. Kit includes all items needed for draining engine oil through the dipstick tube. Includes 3' of 1/2" hose, probe adapter and 40"L x 1/4"dia.
|
Rim Latch Sets - Reverse Bevel with Flush Strike from PERKO
Chrome-plated zinc. Sliding lock button. Case size: 2 1/8'' x 1 3/4''. Escutcheon Size: 4 3/8'' x 1 1/4''. For Door: 5/8'' to 1 3/8''.
|
Solid Brass Vertical Action Galley Pump from FYNSPRAY
Vertical plunger pump with a gracefully arched spout. 50 strokes per gallon. 1"diameter tube. Fits 1/2"–5/8" hose. Requires 8 1/2" clearance below counter surface; 9 3/4" above Material: Brass. Capacity: 50 strokes/gal. Dimensions: 9 3/4"H. Cutout Size: 1 1/8". Clearance: 8 1/2".
|
Aft-Deck Shower System from ATTWOOD
This compact hot/cold shower stores neatly in its own compartment on the stern or in the head. Includes a handheld shower spray head with shutoff, 6' hose, hot/cold water controls and a cover. Easily hooked into your freshwater system. Compartment is drilled for six #8 fasteners. Material: High-impact plastic . Dimensions: 9-1/2"H x 5"W x 2-1/4"D . Hose Size: 6'L . Port Sizes: 1/2" NPT .
|
Stainless Boat Hook Holders from PERKO
Polished stainless steel holders for poles to 1. 5" dia. 3. 5" L x 1" W. . . Sold in pairs.
|
Replacement Gas Strut, 12" Compressed x 20" Extended Length, 40lb. Rating from TAYLOR
Reliable gas struts incorporate a strong annealed steel rod with a special coating for added corrosion resistance. Recommended by the manufacturer for use as dock box lid supports or hatch supports. Where use as a hatch cover support is desired, we recommend you base your selection upon the recommendation of the hatch manufacturer.
|
Panel Mount Thermal Circuit Breaker, 50A from BLUE SEA SYSTEMS
An economical solution for high amperage loads where dependability is required in marine environments. Waterproof and ignition-protected (conforming to SAE J1171) so these circuit breakers are safe for installation aboard gasoline-powered boats. Ideal for branch circuits, windlasses, inverters and watermakers. False-trip free—designed to trip when subjected to a fault current. Available in panel and surface mounts. Interrupt Rating: 3000A at 12V DC. Voltage Compatibility: 42V DC.
|
|
|
Flex Trim - Black 1/2" opening from TACO PRODUCTS
For a beautiful finished look on unfinished edges. Just push it on and it's on to stay. Grips on difficult materials, compound curves, etc. Individual corrosion resistant aluminum clips for a permanent grip. Black or White . Sold in 25' lengths. . Available in four sizes:. 5/32" opening x 35/64"H. 1/4" opening x 1/2"H. 3/8" opening x 5/8"H.
|
WL/1 Fairlead Model from SPINLOCK
New low-profile design easily mounts to 1" stanchion using internal clamping system. WL/2 sheave model utilizes unique tracker ball angle adjustment. WL/1 Fairlead model includes stainless-steel bullseye for strength.
|
Impeller, 18-3062 from SIERRA
Recommended replacement schedule is every 3 years for fresh water and every year for salt water Click to view a Sierra Impeller Application Chart (PDF) For further assistance, have your year & model information handy and call our Product Advisors at 1-800-BOATING.
|
Yamaha Outboard 1984-1996, 1-4 Cyl., V4, V6, 2-250 HP from SELOC PUBLICATIONS
Designed and written to serve the needs of the professional mechanic, do-it-yourself boat enthusiast, instructor and student, these manuals are based on actual teardowns done by Seloc’s editors/authors in our on-site facility. This repair manual covers all Yamaha outboard engines, 12-250 HP, 1-4 cylinder, V4, V6 models, 1990 to 2001. Every manual features: Easy-to-follow, step-by-step, illustrated procedures . Hundreds of exploded drawings, photographs and tables . Troubleshooting sections .
|
|
1, Pistonring from SIERRA, Rating from TAYLOR, 1" x 1, Yellow from WILLAPA
|
|
Home -> Sailboat -> Sailboat Canvas -> Cockpit Awnings/Cushions->Sunbrella Fabrics, 46 Inches Wide
Repair boat covers and biminis, or make your own! Repair existing covers and biminis, or make your own! Sunbrella, used in many covers, awnings, cushions and biminis, is an acrylic fiber with excellent resistance to weather, UV light and mildew. It won‘t shrink or stretch and is sew-able with a home machine. 46"W. Sold by the yard.
Part No: FS4631
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->LED Cluster Lamps
Bright diodes draw a miniscule 60mA. Single or double-contact bayonet sockets. 12V DC.
Part No: 529429
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Rings-Piston|**Rings-Piston.
Part No: 18-3927
|
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Tune Up Parts
**Rings-Piston|**Rings-Piston.
Part No: 18-3924
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports->Replacement Gas Struts for Dock Boxes & Hatches
Reliable gas struts incorporate a strong annealed steel rod with a special coating for added corrosion resistance. Recommended by the manufacturer for use as dock box lid supports or hatch supports. Where use as a hatch cover support is desired, we recommend you base your selection upon the recommendation of the hatch manufacturer.
Part No: 1831
|
|
|
|
Home -> Trailer & Parts -> Trailer Lighting -> Trailer Lighting->Waterproof, Low-Profile Thermoguarded Trailer Lights
Top-quality, multi-functional trailer lights feature waterproof capsules to protect bulbs from corrosion and thermoshock during boat launching and loading. Tough polycarbonate lens and rugged duramold housing. The kit includes a right and left tail light, license bracket, wire harness, hardware and instructions. The replacement lens kit includes two stop/turn/tail lenses, two side lenses and eight replacement screws. For any trailer, including those with overallwidths of 80" or more.
Part No: 01-5249-71
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Dock Hardware->"S" Cleats
The S-shape makes it easy to loop a rope around the horns. The wide bolt pattern and large bosses on the underside allow for secure fastening to the dock.
Part No: 35-12
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Plastic Bilge Strainers
Built-in check valve prevents water from draining back into bilge. Molded plastic with synthetic rubber valve. Screen may be removed for cleaning. Fits 1" and 1-1/2" hose.
Part No: SB4222
|
|
|
|
Home -> Electrical -> Chargers & Inverters -> Wind/Water Chargers->Air Breeze Wind Generator Accessories
Accessories for Air Breeze Wind Generator.
Part No: 2-ARAC-103
|
|
|
|
Home -> Anchor & Docking -> Anchor Line & Dock Line->Anchor Buddy Mooring Line
The anchor rope that stretches Rope-covered bungee cord stretches from 14' to 50'. Anchor with Anchor Buddy, drive to shore, tie up boat securely to land and let the Anchor Buddy stretch cord pull it back out from shore for safe moorage.
Part No: AB4000-RD
|
|
|
|
Home -> Trailer & Parts -> Trailer Lighting -> Trailer Lights, Wiring
Premium LED trailering lights are fully submersiblePremium LED lights are designed for submersible applications and often used in the fender marker lamp location. Polycarbonate lights are sonically sealed to keep out water and corrosion. Kit includes chrome mounting bracket, two-wire sealed pigtail and PVC grommet to accommodate any mounting location.
Part No: G1512-5
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting->Series 20 Navigation Lights
For powerboats to 12m. Computer-designed fresnel lenses are focused to eliminate glare. Efficient 5W lamp consumes just 0. 42A @ 12V DC. 8" masthead w/15° aft incline. Case Material: Glass-reinforced polycarbonate . Mounting Hardware: Self-adhesive gasket and special dowel included . Volts: 12V . Draw: 0. 42A @ 12V DC . Replacement Bulb: Model 365510 .
Part No: 20202-7
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Includes hose, 3/8" primer bulb (18-8004) and a 1/4" hose barb to the tank (18-8055) and a fuel line connector to the engine (18-8085). Length: 8' . Hose Diameter: 5/16" . Silverado 2000 Premium . Fits Force 40 HP and larger (1993 & Newer), Force 9.
Part No: 18-8024EP
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting->One-Mile Sidelights
Designed to mount on the foredeck or any flat surface of powerboats to 12m. Lights have 1nm visibility. Polycarbonate lenses. Accept #90 (7. 5W) lamps. Stainless model uses an 8W lamp. Bases are predrilled with two countersunk holes. Die-cast Zamak model has a Perma-Plate chrome finish. Volts: 12V . Draw: 0. 62A .
Part No: 6375D6
|
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports->Replacement Gas Struts for Dock Boxes & Hatches
Reliable gas struts incorporate a strong annealed steel rod with a special coating for added corrosion resistance. Recommended by the manufacturer for use as dock box lid supports or hatch supports. Where use as a hatch cover support is desired, we recommend you base your selection upon the recommendation of the hatch manufacturer.
Part No: 1826
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper
Works with electric and air drills on painted surfaces, metal, plastic and wood. Kit uses 2'' discs to reach those hard to get at surfaces. . Contains:. One 2'' disc holder. . Three 2'' RegaliteTM sanding discs. . Two 2'' Scotch-BriteTM stripping discs.
Part No: 03050NA
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Nylock Nuts - Bulk Packs
Type 18-8 stainless steel.
Part No: 1341C
|
|
|
|
Home -> Cordage -> Rigging Products
One convenient pre-packaged 20' length of soft, tubular blue nylon webbing.
Part No: WM 20 BLUE
|
|
|
|
12 Volt LED Length Overall: 1-7/8" Width: 9/16" Screw Size: #6.
Part No: 0145DP0NYN
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks->Floating & Telescoping Boat Hooks
West Marine floating and telescoping boat hooks are great for smaller boats with limited storage space We spent years looking for a boat hook good enough to put our name on. The one we chose floats and features anodized aluminum tubing that telescopes quickly and twist-locks securely. Our heavy-duty version, Model 7784267, features oversized anodized-aluminum tubes for greater strength and stiffness. It has a comfort grip handle and a fully co-molded soft-tipped hook that prevents scratches.
Part No: 85003B
|
|
|
|
|
Home -> Sailboat -> Sailboat Canvas->Sunbrella Fabrics, 46 Inches Wide
Repair boat covers and biminis, or make your own! Repair existing covers and biminis, or make your own! Sunbrella, used in many covers, awnings, cushions and biminis, is an acrylic fiber with excellent resistance to weather, UV light and mildew. It won‘t shrink or stretch and is sew-able with a home machine. 46"W. Sold by the yard.
Part No: FS4630
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers->Trailer Wheel Bearing Sets
Replace worn bearings for smoother operation of your trailer wheels. Each set outfits one wheel. Includes outer and inner bearing set, two races, grease seal and cotter pin.
Part No: 27115
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Bow, Keypin, “D,” Long “D” & Twisted “D” Shackles
Legendary for their quality, beautiful polish and smooth contours. Drop-forged stainless steel ensures that shape remains intact at loads that meet or exceed the deformation point.
Part No: 1413
|
|
|
|
Home -> Electronics -> VHF Radios & Communications -> Hailers & Intercoms->VHS External Speakers
All-purpose utility speaker is seaworthy and loud A handy external speaker for your boat's VHF radios, hailers, public address system, foghorns and intercoms.
Part No: EXT-2
|
|
|
|
|
Home -> Cordage -> Anchor Line & Dock Line->Anchor Buddy Mooring Line
The anchor rope that stretches Rope-covered bungee cord stretches from 14' to 50'. Anchor with Anchor Buddy, drive to shore, tie up boat securely to land and let the Anchor Buddy stretch cord pull it back out from shore for safe moorage.
Part No: AB4000-O
|
|
|
|
Home -> Fishing -> Fishing Accessories
400' Twisted Poly Rope 1/4"x400' twisted poly rope on a spool. Great for shrimping or crabbing. Color: Yellow.
Part No: 00159
|
|
|
|
Home -> Interior, Flags & Gifts -> Gifts
A unique way to keep your hangables in order!Practical and charming four hook decorative metal wall plaque has been hand crafted and enameled with a classic antiqued finish. Great for organizing keys, hats, coats, lines and more. 6. 3"H x 1. 57"W x 14.
Part No: AC300
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Back-Up Seal
The DrySeal has an optional back-up seal that if installed during the original time of installation can be installed without removing the unit or the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: EX-100
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes->Windshield Wiper Blades, Arms, Motors, and Kits
#32002 and 32003 have 110º adjustable sweep motor. #32000 and 32002 have 2-1/2" shaft length motor and are Windshield Frame Mount. 12 volt, 2 amps. AFI STD Wiper Motor with 11 inch stainless steel standard straight blade (33001) and adjustable (7-1/2 inches to 12 inches) stainless steel arm (33002) . Note: motor is not waterproof and is recommended for interior installations only. AFI Wiper Motors AFI-1000 is waterproof and powers 18" x 18" arm/blade combinations.
Part No: 33015
|
|
|
|
Home -> Cordage -> Rigging Products -> Wind Instruments
Includes aluminum shaft, brackets, and stainless fasteners for top or side mounts .
Part No: 1705
|
|
|
