Top Sellers
Furler Kit for Boat Length to 16', 500lb. SWL, 1/8" Max. Wire dia., 1/4" Pin dia., 2-1/2" Pin-to-Pin, 5/32" Furling Line dia. from HARKEN
Furl or set your jib from your cockpit Harken small boat furlers allow the sail to be set and furled from the cockpit, a critical convenience in many racing dinghies and trailerable sailboats. Constructed of Hardkote anodized Teflon-impregnated aluminum, they feature multiple stacked races of Delrin or Torlon ball bearings for smooth rotation under load. The jib’s luff wire must be properly seized to the sail, since it carries most of the headstay load. 434 furler for dinghies under 16ft. (4.
|
Bullet Block, Double, 400lb. SWL, 2.5oz. from HARKEN
Available in a wide range of designs, bullet blocks are the foundation of the Harken line, and are adaptable to almost all control line applications. Ideal for cunninghams, vangs, outhauls, traveler controls, spinnaker controls, barberhaulers, etc. Where applicable, blocks use #10 fasteners. Sheave: Delrin® . Ball Bearings: Delrin® . Sheave Size: 1 1/8" (29mm) . Line Dia: 5/16" max. . Cheek Material/Finish: Plastic with stainless strap . Cleat: 094, 095, 291- 423 Carbo-Cam® .
|
Bullet Block, Cheek, 300lb. SWL, 1.3oz. from HARKEN
Available in a wide range of designs, bullet blocks are the foundation of the Harken line, and are adaptable to almost all control line applications. Ideal for cunninghams, vangs, outhauls, traveler controls, spinnaker controls, barberhaulers, etc. Where applicable, blocks use #10 fasteners. Sheave: Delrin® . Ball Bearings: Delrin® . Sheave Size: 1 1/8" (29mm) . Line Dia: 5/16" max. . Cheek Material/Finish: Plastic with stainless strap . Cleat: 094, 095, 291- 423 Carbo-Cam® .
|
Bullet Block, Single, 300lb. SWL, 1.0oz. from HARKEN
Available in a wide range of designs, bullet blocks are the foundation of the Harken line, and are adaptable to almost all control line applications. Ideal for cunninghams, vangs, outhauls, traveler controls, spinnaker controls, barberhaulers, etc. Where applicable, blocks use #10 fasteners. Sheave: Delrin® . Ball Bearings: Delrin® . Sheave Size: 1 1/8" (29mm) . Line Dia: 5/16" max. . Cheek Material/Finish: Plastic with stainless strap . Cleat: 094, 095, 291- 423 Carbo-Cam® .
|
2.25" Block, Double with Becket, 1,000lb. SWL, 9.5oz. from HARKEN
The original Harken block Used for main and jib sheets on course racing keelboats, scows and dinghies with large mains. Often used for spinnaker halyards and sheets on small offshore boats. Swivel blocks feature a three-way head system with a set screw. Blocks with cams feature adjustable cam arms and reversible cam cleats. Where applicable, blocks use #8 fasteners. Sheave: Delrin. Bearings: Delrin ball bearings. Sheave Size: 2-1/4" (57mm). Line Diameter: 7/16" max.
|
2.25" Block, Double, 1,000lb. SWL, 8.5oz. from HARKEN
The original Harken block Used for main and jib sheets on course racing keelboats, scows and dinghies with large mains. Often used for spinnaker halyards and sheets on small offshore boats. Swivel blocks feature a three-way head system with a set screw. Blocks with cams feature adjustable cam arms and reversible cam cleats. Where applicable, blocks use #8 fasteners. Sheave: Delrin. Bearings: Delrin ball bearings. Sheave Size: 2-1/4" (57mm). Line Diameter: 7/16" max.
|
Single Sheave, No Cleat, 2:1 Purchase, 300lb. SWL from HARKEN
These end controls fit on all Harken Small Boat track. Low-profile, high-strength and lightweight, these can be used in 2:1, 3:1 or 4:1 purchase systems. Easy installation with the turn of a screw. Sold in pairs. Track Type: Fits all Small Boat track. Material: One-piece aluminum base. Ball Bearings: Carbon-black Delrin. Sheave Size: 1-1/8" (29mm). Length: 3-7/16" (87mm).
|
Bullet Block, Triple with Cam, 600lb. SWL, 7.0oz. from HARKEN
Available in a wide range of designs, bullet blocks are the foundation of the Harken line, and are adaptable to almost all control line applications. Ideal for cunninghams, vangs, outhauls, traveler controls, spinnaker controls, barberhaulers, etc. Where applicable, blocks use #10 fasteners. Sheave: Delrin® . Ball Bearings: Delrin® . Sheave Size: 1 1/8" (29mm) . Line Dia: 5/16" max. . Cheek Material/Finish: Plastic with stainless strap . Cleat: 094, 095, 291- 423 Carbo-Cam® .
|
Bullet Block, Single Swivel, 300lb. SWL, 1.5oz. from HARKEN
Available in a wide range of designs, bullet blocks are the foundation of the Harken line, and are adaptable to almost all control line applications. Ideal for cunninghams, vangs, outhauls, traveler controls, spinnaker controls, barberhaulers, etc. Where applicable, blocks use #10 fasteners. Sheave: Delrin® . Ball Bearings: Delrin® . Sheave Size: 1 1/8" (29mm) . Line Dia: 5/16" max. . Cheek Material/Finish: Plastic with stainless strap . Cleat: 094, 095, 291- 423 Carbo-Cam® .
|
Cruising Kit for Boat Length to 25', 2000lb. SWL, 3/16" Max. Wire dia., 5/16" Pin dia., 4" Pin-to-Pin, 1/4" Furling Line dia. from HARKEN
Furl or set your jib from your cockpit Harken small boat furlers allow the sail to be set and furled from the cockpit, a critical convenience in many racing dinghies and trailerable sailboats. Constructed of Hardkote anodized Teflon-impregnated aluminum, they feature multiple stacked races of Delrin or Torlon ball bearings for smooth rotation under load. The jib’s luff wire must be properly seized to the sail, since it carries most of the headstay load. 434 furler for dinghies under 16ft. (4.
|
Bullet Block, Triple, 600lb. SWL, 3.8oz. from HARKEN
Available in a wide range of designs, bullet blocks are the foundation of the Harken line, and are adaptable to almost all control line applications. Ideal for cunninghams, vangs, outhauls, traveler controls, spinnaker controls, barberhaulers, etc. Where applicable, blocks use #10 fasteners. Sheave: Delrin® . Ball Bearings: Delrin® . Sheave Size: 1 1/8" (29mm) . Line Dia: 5/16" max. . Cheek Material/Finish: Plastic with stainless strap . Cleat: 094, 095, 291- 423 Carbo-Cam® .
|
Hi-Load Kit for Boat Length to 20', 950lb. SWL, 1/8" Max. Wire dia., 1/4" Pin dia., 2-1/2" Pin-to-Pin, 5/32" Furling Line dia. from HARKEN
Furl or set your jib from your cockpit Harken small boat furlers allow the sail to be set and furled from the cockpit, a critical convenience in many racing dinghies and trailerable sailboats. Constructed of Hardkote anodized Teflon-impregnated aluminum, they feature multiple stacked races of Delrin or Torlon ball bearings for smooth rotation under load. The jib’s luff wire must be properly seized to the sail, since it carries most of the headstay load. 434 furler for dinghies under 16ft. (4.
|
2.25" Block, Single, 500lb. SWL, 4.5oz. from HARKEN
The original Harken block Used for main and jib sheets on course racing keelboats, scows and dinghies with large mains. Often used for spinnaker halyards and sheets on small offshore boats. Swivel blocks feature a three-way head system with a set screw. Blocks with cams feature adjustable cam arms and reversible cam cleats. Where applicable, blocks use #8 fasteners. Sheave: Delrin. Bearings: Delrin ball bearings. Sheave Size: 2-1/4" (57mm). Line Diameter: 7/16" max.
|
Bullet Block, Pivoting Exit with Cam, 150lb. SWL, 3.8oz. from HARKEN
Available in a wide range of designs, bullet blocks are the foundation of the Harken line, and are adaptable to almost all control line applications. Ideal for cunninghams, vangs, outhauls, traveler controls, spinnaker controls, barberhaulers, etc. Where applicable, blocks use #10 fasteners. Sheave: Delrin® . Ball Bearings: Delrin® . Sheave Size: 1 1/8" (29mm) . Line Dia: 5/16" max. . Cheek Material/Finish: Plastic with stainless strap . Cleat: 094, 095, 291- 423 Carbo-Cam® .
|
Snatch Block, High-Load Style with Trunnion, 3,500lb. SWL from HARKEN
The recessed push button on these blocks allows quick one-handed operation for receiving or removing a line. Features Harken’s low-friction roller bearings for sheave loads and ball bearings for side loads. Snap shackles attach to pad eyes and bails, while trunnion shackles attach to toerails and other fixtures where an ordinary snap shackle will not align with the load. : 5/8". Sheave: Glass-filled Delrin® . Bearings: Ball and roller bearings . Opening: One-handed push button .
|
|
from HARKEN, SWL from HARKEN, from RONSTAN, from LEWMAR, 32IN from HARKEN, SWL
|
|
Seating & Covers -> Carpet, Vinyl & Canvas->Sungard® , Marine Grade Upholstery Thread
Ultra-Violet Stable Thread for use on vinyl, canvas and endless other outdoor uses. An excellent match for Sunbrella fabrics Will not rot. Many popular colors available. 1" diameter bobbin.
Part No: 219Q4
|
|
|
Sailboat -> Blocks->Big Bullet Blocks
.
Part No: 148
|
|
|
Books & Videos -> Books
It's time to replace your dog-eared copies of the first edition of Spanish for Cruisers! The much-expanded second edition of this popular language guide is available and now covers ALL the language and vocabulary necessary to cruise the Spanish-speaking countries of the Caribbean, Central and South America and Europe. Spanish for Cruisers is just as useful ashore for food provisioning, shopping, dining, medical care, banking, phone, internet, transportation and directions.
Part No: 9780967590523
|
|
|
Sailboat -> Headsail Furling -> Furling Accessories->Clevis Pin Sets
Clevis Pin Sets.
Part No: 1107
|
|
|
Cabinet & Deck Hardware -> Rail Fittings & Rub Rail->Plastic Handles and Hand Rails
Plastic handles and hand rails. Handles available in black or white PVC coated plastic. Handrails are white polypropolene. Handles are 10" long Handrails are 1 1/16W x 1 3/8"H. 1 loop: 13"L. 2 loop: 23"L. 3 loop: 33"L.
Part No: 65104
|
|
|
Paint & Maintenance -> Paint, Varnish & Teak Oil -> Primers, Undercoats & Non-Skid->Alodine 1201 Primer (Professional Application Only)
Gold, chromic acid conversion coating for aluminum prevents corrosion.
Part No: O73003/1QTUS
|
|
|
Sailboat -> Blocks -> Blocks->Series 55 Ball-Bearing Orbit Blocks™
The precision design provides the optimum number of ball bearings in critically loaded areas, eliminates them in inactive areas and reduces ineffective mass, creating the "2-stage" bearing system for durability and low friction performance. The flexible Dyneema® rope link is a product of the latest trends in grand prix ocean racing and provides a more flexible, lighter weight and lower profile solution than traditional shackles. Sheave Size: 2-5/32" (55mm).
Part No: RF55101
|
|
|
Sailboat -> Headsail Furling -> Headsail Furling->Terminals For MKIII Unit 1 &1.5 Furlers
MkIII jib reefing and furling systems are strong, lightweight and aerodynamic, featuring free-rolling Torlon® bearings, computer-designed stacked bearing races, and large diameter drums for easy reefing and furling. Free-spinning high-strength Air Swivels reduce weight aloft to minimize pitching and heeling. Deep penetration Hardkote anodizing ensures years of corrosion resistance. Boat Size: 28' to 36' (8. 3 - 11m) . Headstay Length: Standard 45'8" (13. 92m); max 52'8" (16.
Part No: 818
|
|
|
Sailboat -> Blocks->16mm AirBlocks®
AirBlocks have a lightweight design and a unique patented bearing system which uses stainless steel balls in a captive, grooved race. Very high working loads in an extremely lightweight block, with the best strength-to-weight ratios around. Sheave: Delrin. Sheave Size: 5/8" (16mm). Ball Bearings: Stainless. Line Diameter: 7/32" max.
Part No: 409
|
|
|
Sailboat -> Blocks
Stand-Up base fits the head post of Series 50 blocks for added versatility. Diamond shape base measures 2" x 3" . Pin diameter: 3/16". MWL: 1100lb.
Part No: RF2450
|
|
|
Sailboat -> Sailboat Canvas -> Winch Wheel & Acc. Cove->Winch Covers
Protect winches from weather and salt Heavy-duty winch covers are made from tough, UV-protected ripstop nylon and feature side loops for securing. Reinforced fabric on top keeps marine weather at bay and a top loop makes for quick removal. Covers are sized from 1-13 to fit winches as tall as 15. 6" and diameters to 14.
Part No: BP905
|
|
|
Anchor & Docking -> Windlasses & Rollers->Anode Kits
The Lewmar TT anode has a specially designed stainless-steel sheath for optimal retention.
Part No: 589550
|
|
|
|
Sailboat -> Sailboat Canvas -> Winch Wheel & Acc. Cove->Winch Covers
Protect winches from weather and salt Heavy-duty winch covers are made from tough, UV-protected ripstop nylon and feature side loops for securing. Reinforced fabric on top keeps marine weather at bay and a top loop makes for quick removal. Covers are sized from 1-13 to fit winches as tall as 15. 6" and diameters to 14.
Part No: BP904
|
|
|
Sailboat -> Blocks->30mm Synchro Control Blocks
Quality Lewmar blocks in compact 30mm size Lightweight 30mm blocks feature the same advanced materials and open design of Lewmar's 40mm blocks for high performance and reduced weight. The MRT (Metal Replacement Technology) sheaves, combined with the stainless steel central race and balls, deliver the ultimate efficiency and weight advantage. Sheave: MRT Composite reinforced plastic Ball Bearings: Stainless-steel central race and balls Sheave Size: 1-1/16" (30mm) Line Dia.
Part No: 29901325
|
|
|
|
Anchor & Docking -> Windlasses & Rollers
The Lewmar TT anode has a specially designed stainless-steel sheath for optimal retention.
|
|
|
|
Sailboat -> Sailboat Canvas -> Winch Wheel & Acc. Cove->Winch Covers
Protect winches from weather and salt Heavy-duty winch covers are made from tough, UV-protected ripstop nylon and feature side loops for securing. Reinforced fabric on top keeps marine weather at bay and a top loop makes for quick removal. Covers are sized from 1-13 to fit winches as tall as 15. 6" and diameters to 14.
Part No: BP903
|
|
|
Sailboat -> Blocks -> Blocks->Bullet Blocks
Available in a wide range of designs, bullet blocks are the foundation of the Harken line, and are adaptable to almost all control line applications. Ideal for cunninghams, vangs, outhauls, traveler controls, spinnaker controls, barberhaulers, etc. Where applicable, blocks use #10 fasteners. Sheave: Delrin® . Ball Bearings: Delrin® . Sheave Size: 1 1/8" (29mm) . Line Dia: 5/16" max. . Cheek Material/Finish: Plastic with stainless strap . Cleat: 094, 095, 291- 423 Carbo-Cam® .
Part No: 085
|
|
|
Sailboat -> Blocks->Micro Blocks
Extremely lightweight, free running blocks. Designed for any number of uses on dinghies and for lightly-loaded control lines on boats of all sizes (inside masts and booms, lead car returns, tackle, etc. ). Where applicable, blocks use #10 fasteners. Sheave: Delrin® . Ball Bearings: Delrin® . Sheave Size 7/8" (22mm) . Line Dia: 1/4" max. . Cheek Material/Finish: Polished 316 stainless . Shackle/Strap Type: Fixed loop, loop with shackle .
Part No: 229
|
|
|
Engine Systems -> Steering Systems->TFXtreme 4300 BC Performance Cables
TfXtreme's unique design assures smoothness and efficiency–with hardly any lost motion–even in the longest and most complex cable routings! This means superior feel at the control, in any boat–performance that had been considered "impossible". TfXtreme achieves the "impossible". Patent-pending splined core to achieves the impossible–easy movement and minimum lost motion.
Part No: CC69207
|
|
|
Sailboat -> Blocks->40mm Carbo AirBlocks®
From the folks who invented ball bearing blocks, this line of blocks boasts an excellent strength-to-weight ratio. 29mm doubles and triples feature a U-lock to hold the swivel in the front or side position, or allow it to spin freely. Use the 40mm blocks for jib and mainsheet systems on high-performance dinghies, and for high-load control lines on small keelboats. The 57mm blocks have an enormous working range that makes them ideal for main and jib sheets, spinnaker halyards and control lines.
Part No: 2655
|
|
|
Sailboat -> Traveler, Tracks & Vang->Battcar Batten Traveler Systems, System A Components
Add a lazy jack system, and raising or lowering your mainsail becomes a single person operation. Battcar systems also improve sailing performance, because they do not require the sail to be cut flat, or reduce the size of the roach, as with other systems. They make mainsail handling safer, by allowing you to raise or lower the sail with practically no effort at all, even with the sail powered up. At the inboard end of every batten, special ball bearing or slider Battcars move along the track.
Part No: 3809
|
|
|
|
Sailboat -> Traveler, Tracks & Vang->Battcar Batten Traveler Systems, System A Components
Add a lazy jack system, and raising or lowering your mainsail becomes a single person operation. Battcar systems also improve sailing performance, because they do not require the sail to be cut flat, or reduce the size of the roach, as with other systems. They make mainsail handling safer, by allowing you to raise or lower the sail with practically no effort at all, even with the sail powered up. At the inboard end of every batten, special ball bearing or slider Battcars move along the track.
Part No: 3808
|
|
|
|
Sailboat -> Traveler, Tracks & Vang->Battcar Batten Traveler Systems, System A Components
Add a lazy jack system, and raising or lowering your mainsail becomes a single person operation. Battcar systems also improve sailing performance, because they do not require the sail to be cut flat, or reduce the size of the roach, as with other systems. They make mainsail handling safer, by allowing you to raise or lower the sail with practically no effort at all, even with the sail powered up. At the inboard end of every batten, special ball bearing or slider Battcars move along the track.
Part No: 3810
|
|
|
Sailboat -> Blocks -> Blocks->29mm Carbo AirBlocks®
From the folks who invented ball bearing blocks, this line of blocks boasts an excellent strength-to-weight ratio. 29mm doubles and triples feature a U-lock to hold the swivel in the front or side position, or allow it to spin freely. Use the 40mm blocks for jib and mainsheet systems on high-performance dinghies, and for high-load control lines on small keelboats. The 57mm blocks have an enormous working range that makes them ideal for main and jib sheets, spinnaker halyards and control lines.
Part No: 342
|
|
|
Sailboat -> Headsail Furling->Carbo Furling Lead Block Assemblies
These stanchion lead blocks have free-rolling ball bearings to lead line aft for safe furling from the cockpit. Use the 7401 40mm block on the bow pulpit as an inboard lead. The 7402 features a ratchet to control spooling when unfurling. The 7401 and 7402 have ball and socket bases to align blocks for smooth leads aft. The 7403 has a 29mm sheave and allows the furling line to travel outboard of the stanchion to keep the side deck clear. Mounts to stanchion with a four-screw clamp.
Part No: 7401
|
|
|
Fishing -> Fishing Accessories->Piranha Straight Aerators
Designed for serious anglers, the Piranha Straight Aerator features strong UV stabilized, glass-filled nylon construction and comes complete with a through-hull fitting with nut and washer for easy mounting.
Part No: 357-012-10
|
|
|
Sailboat -> Blocks -> Blocks->Series 30 Orbit Blocks™
Their flexible lashing and Dyneema® Link technology mirrors the latest trends in development classes and grand prix ocean racing. The product of meticulous engineering, they deliver the ultimate in strength, weight savings and control. Months of on-water testing by elite sailors pushed the product to their limits. Halyard, vang and backstay applications on boats to 16ft . Control line applications on larger boats . Materials: Sheave: High-compression–strength carbon black Acetal .
Part No: RF35212
|
|
|
Sailboat -> Blocks -> Blocks->Series 30 Ball-Bearing Mini Blocks
Like Ronstan Series 20 blocks, but with larger (1-3/16") sheave diameter, higher SWL and Acetyl–not stainless steel–bearings. High-Load (HL) blocks feature a Nylatron® sheave suitable for both rope and wire. Sheave: UV-stabilized acetal. Ball Bearings: Two-stage acetal system. Sheave Size: 1-3/16"dia. Line Diameter: 5/16" max. Cheek Material/Finish: Stainless and textured fiber-reinforced Zytel.
Part No: RF30212
|
|
|
Sailboat -> Blocks->57mm Carbo AirBlocks®
From the folks who invented ball bearing blocks, this line of blocks boasts an excellent strength-to-weight ratio. 29mm doubles and triples feature a U-lock to hold the swivel in the front or side position, or allow it to spin freely. Use the 40mm blocks for jib and mainsheet systems on high-performance dinghies, and for high-load control lines on small keelboats. The 57mm blocks have an enormous working range that makes them ideal for main and jib sheets, spinnaker halyards and control lines.
Part No: 2607
|
|
|
Paint & Maintenance -> Epoxy & Fiberglass->#209 Extra Slow Hardener
Provides approximately twice the working time of 206 Slow Hardener. Not intended for clear coating. Mini Pump Kit is a must for precise metering of all group sizes of WEST SYSTEM resins and hardeners. Mix Ratio, Resin:Hardener Pot life at 72°F (22°C) at 95°F (35°C) Cure to a solid state at 72°F (22°C) at 95°F (35°C) Cure to maximum strength at 72°F Minimum recommended temperature Pumps 3:1 by volume (3.
Part No: 209-SA
|
|
