Top Sellers
Hatch Riser Arm for 20" x 20" Hatch from TAYLOR
Replacement arms for Taylor hatches from 1987 to the present. Universal arms can be left or right.
|
|
|
84”L Fiberglass Bow from TAYLOR
Bows moounted in bow sockets are the sure and easy way to keep a boat cover taut and free from water-collecting pockets. Sockets can be mounted on any rail system or anywhere on deck wall. Rubber gasket provides snug fit for fiberglass bows. Super strong and flexible, will not take a “set”. Cut to desired length. Incude rubber end covers to grab socket.
|
Replacement Gas Strut, 12" Compressed x 20" Extended Length, 40lb. Rating from TAYLOR
Reliable gas struts incorporate a strong annealed steel rod with a special coating for added corrosion resistance. Recommended by the manufacturer for use as dock box lid supports or hatch supports. Where use as a hatch cover support is desired, we recommend you base your selection upon the recommendation of the hatch manufacturer.
|
Adjustable Lock from TAYLOR
Three-part system provides easy snap-on/snap-off fender attachment and adjustment. A stainless base mounts to your boat, into which a peg snaps to hold the fender strap (sold separately). Fixed peg requires tying a knot to secure the fender at the desired height. Adjustable peg - adjust fender height by simply pulling on the strap. Max.
|
T-Top Boat Cover, Center-Line Length 20'5" to 21'4", Blue from TAYLOR
The main features of these covers are: Bow and stern sections are separated into two halves. The sections are joined through the use of a 7mm single pull molded nylon zipper on both the port and starboard sides. Cover design incorporates a "console tube" section with two adjustable straps which lift and secure the cover halves up and over the console body and up under the T-top. The top edge of console tube incorporates an adjustable draw rope in both front and rear sections.
|
Welcome Aboard Mat, Navy, 18" X 30" from TAYLOR
High-quality, marine-grade mats will add spice to any deck or door. Made from plush carpet that is waterproof, stain- and fade-resistant. Mats are mold- and mildew-resistant and feature a nonskid rubber backing.
|
Sully Stick Winter Mooring Buoy from TAYLOR
Extend the life of your mooring with our ice-proof stickUse this long tapered buoy in place of a standard round buoy during winter months to help prevent ice entrapment and extend the life of the mooring by protecting it from the damaging effects of freezing temperatures. Molded in eyelet at the top allows for easy retrieval and the base eyelet is reinforced with galvanized metal brushing to attach a rope and connect to the anchor chain. 80"L x 6" Dia.
|
Medium Edging, White, 25' Coil, 3-1/2"H x 1-1/2"W from TAYLOR
Prevent scuffing when you dock Vinyl dock guard is specially formulated for softness and durability to protect your boat or dinghy. Each piece installs easily with screws or nails to the edge of docks, piers and floats. Material: Extruded PVC . Attachment Method: Stainless steel dock nails . Shock Absorption Mechanism: Flexible PVC .
|
Single Deck Chair Cover, 24"H x 24"W x 22"D from TAYLOR
Protect your seats from the elements!Heavy-duty waterproof poly/vinyl blend keeps your seats from cracking and fading. Poly/vinyl blend is softer and more pliable than traditional vinyl.
|
Fishing Boat Cover - HS Blue 15'5"-16'4"/65" Beam from TAYLOR
Patterned to fit basic fishing boats with bench seats. (These covers are not patterned to fit over trolling motors. ) The bow and transom corners are reinforced to protect the cover from sharp aluminum edges. Poly Cotton Fabric: Trailerable 65% polyethelyne/35% cotton Breathable Mildew & Stain Resistant Water Repellant Heavy-gauge shock cord in hem 2-year limited warranty Color: Silver Gray. Hot Shot Fabric (HS): Trailerable 100% urethane-coated polyester 7.
|
Fender Pump from TAYLOR
Compact, high-pressure hand pump for filling fenders, rafts, footballs, etc.
|
|
|
T-Top Boat Cover, Center-Line Length 19'5" to 20'4", Blue from TAYLOR
The main features of these covers are: Bow and stern sections are separated into two halves. The sections are joined through the use of a 7mm single pull molded nylon zipper on both the port and starboard sides. Cover design incorporates a "console tube" section with two adjustable straps which lift and secure the cover halves up and over the console body and up under the T-top. The top edge of console tube incorporates an adjustable draw rope in both front and rear sections.
|
Windshield Support Bar, 13" from TAYLOR
Top-quality support bars are original equipment on many walk-thru windshields. Anodized aluminum tubing with nylon fittings, which pivot in almost any direction for easy installation.
|
|
from MOELLER, L from, MarineGlo™ from TAYLOR, Sand from TAYLOR
|
|
Home -> Safety -> Life Jackets -> Recreational Life Jackets->Runabout Vests
All-purpose recreational vest is great for the whole family! Affordable, high-quality general boating vest is a good choice for boating, fishing or relaxing on the water. The nylon shell is rugged and quick drying. The Crosstech Flotation® Foam is not bulky and conforms to your body's shape so it won't hinder your movements. Three adjustable belts offer a secure, personalized fit. Non-restrictive deep neckline. USCG Type: III. Flotation Material: Crosstech® Flotation Foam.
Part No: 3570-0149
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Cooling Systems->Thermostat Gaskets, Kits, Hoses
Please choose your part using Sierra's part number.
Part No: 18-70932
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Fenders->Super Gard™ Fenders
These fenders will stand up to anything and stand out in a crowd TaylorMade Products has incorporated the latest in technology, design innovation, and attention to detail to bring you the finest looking, top performing protection for your dollar. Super Gard™ fenders can take the toughest abuse your boat can hand out. Seamless one-piece construction with ribbed sides minimizes roll, and a molded-in valve ensures easy inflation and long life. Double molded black ends for extra strength.
Part No: 700520
|
|
![Zinc Hull Anode - 5"L x 2 1/2"W x 1" thickness from CANADA METALS]( "Zinc Hull Anode - 5\"L x 2 1/2\"W x 1\" thickness from CANADA METALS")
|
|
Home -> Paint & Maintenance -> Zinc Anodes -> Hull/Rudder/Engine Anodes->Hull Anodes
Hull Anodes Rigorously tested to ensure consistency and quality.
Part No: CMZ06SZ
|
|
|
|
Home -> Engine Systems -> Engine Parts
**SealKit-Lower Unit|**SealKit-Lower Unit.
Part No: 18-8373
|
|
|
|
Hayward Fishing trolling weights can be used with all makes of down-riggers.
Part No: HDRRC-06
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Super Gard™ Fenders
.
Part No: 960520
|
|
|
|
Home -> Sailboat -> Rigging Products -> Shroud Covers, Mast Boots->Spreader Boots
Protect your sails from ripping or tearing on your boat’s spreaders with these soft injection-molded UV-resistant synthetic rubber spreader boots. They fit wing and round spreaders, feature a smaller frontal area for less wind resistance and have greater surface area on the end to reduce sail chafing. They install quickly and easily over spreader ends and shrouds, and secure with self bonding rigging tape, Model 318600 (sold separately).
Part No: SPRBOOTSM
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Deckfills and Spare Caps
Larger opening for above deck fills allows better seal with nozzle.
Part No: 6061C
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains
**Retaining Tab|**Retaining Tab.
Part No: 18-1343
|
|
|
|
Home -> Clothing Accessories -> Hats, Watches, & Accessories->Rabbit Island Hat
Part of the Watership Sports™ Collection, the Rabbit Island Sport™ is a great kayaking hat. Made with performance enhancing materials, this hat floats and provides excellent sun protection. It is adjustable and comes with a break-away chinstrap. Comfortable adjustable sizing with high performance wicking sweatband. These lightweight hats wick moisture, are breathable, and quick drying. FEATURES: Colors: Red, Pacific Blue, Seashell. UPF 50+. Adjustable size. Brass eyelets. Dark underbrim.
Part No: RED/BLACK-S/M
|
|
|
|
Home -> Casual Apparel -> Shirts->Men’s Long Sleeve Performance T-Shirts
These t-shirts feel as soft as cotton but their outstanding performance, fit and feel is far superior. And because they have 30+ UPF sun protection built right in, you’ll be protected no matter what you’re doing on the water. 94% polyester, 6% spandex. Men’s M-XXL.
Part No: TSUNAMI-2X
|
|
|
|
Home -> Plumbing -> Fittings & Valves->NozAll Pumpout Adapters
The tough plastic adapter screws into your existing deck fitting and makes an airtight seal with pumpout station’s nozzle. Makes emptying your holding tank as clean, easy and fast as a trip to the gas station.
Part No: 310343504
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass
The assembly adhesive which also seals! Flex-Bond 5000 is the strong one-component adhesive and sealant with good adhesion to metallic surfaces even under the action of water. Thanks to the good initial tack, Flex-Bond 5000 permits uncomplicated and fast assembly. Safety Good adhesion to metallic surfaces even under the action of water. High temperature stability (from –40 °C to +100 °C). High UV stability. Aging resistance. Good resistance to water, cleaning agents, weak acids and alkalis.
Part No: 35-057
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Fender Covers (A-Series, F-Series, HTM-Series & AERE)
Master Fender Covers are specially designed to protect the topsides and hull from fender scuff and reduce the need for expensive gel coat repairs. They are made from a premium stain resistant, non-abrasive, loop-knit acrylic fabric, which is both durable and fade resistant. The HTM-Series (Hole Through Middle) comes in singles or doubles which are also reversible; they fit Taylor Made Big B™ and SuperGard™ fenders.
Part No: MFC-2NS
|
|
|
|
Home -> Paint & Maintenance -> Zinc Anodes->Outdrive Anodes, MerCruiser
Sold in pairs or, where indicated, in kits which include hardware.
Part No: CM821629M
|
|
|
|
Home -> Casual Apparel -> Shirts->Men's Captain Short-Sleeve Tech Tee
Performance layering starts with our Captain Tees. They’re loose cut, with raglan sleeves and underarm gussets for a relaxed fit. Primarily designed as a base layer for active outerwear, these cool tees can also be worn alone. UPF60 fabric protects you against the sun and an anti-microbial treatment inhibits odor. No matter what your level of activity, the breathable, moisture wicking fabric will help to keep you dry. Colors: Orca Black, Marlin Blue, Dolphin Gray, Deck White.
Part No: MARLIN BLUE-L
|
|
|
|
Home -> Casual Apparel -> Shorts->Men's Capitola Short
Lots of pockets, lots of comfort Comfortable and ready for adventure, these casual cargos are made of breathable 100% cotton. Six pockets keep items handy. Men's Sizes: 32 - 42. Colors: Khaki, Olive, Marine, Stone. 6" inseam.
Part No: OLIVE-32
|
|
|
|
Home -> Books & Videos -> Videos & DVDs->Annapolis Seamanship Video/DVD Series
Based on the famous book and narrated by the author John-Rousmaniere--this award-winning series features some of the most outstanding informational sessions in fields like heavy weather sailing, safety, navigation and cruising technique.
Part No: Y371DVD
|
|
|
|
Home -> Casual Apparel -> Swimwear->Beer Can Swim Trunks
Lightweight swim trunks with real pockets! Sporty, lightweight, quick-drying trunks have cargo side pockets and secure zip pocket on the inside waistband. Imported . Men’s sizes M-XXL .
Part No: SEA GREEN-XL
|
|
|
|
Home -> Engine Systems -> Steering Systems -> Hydraulic Steering
.
Part No: 032377-03-072.0
|
|
|
|
You know they’re down there the deep dwellers the huge saltwater monsters that break trolling lines and records! Find out just how to bag ‘em with instructional video hints.
Part No: F3975DVD
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Super Gard™ Fenders
These fenders will stand up to anything and stand out in a crowd TaylorMade Products has incorporated the latest in technology, design innovation, and attention to detail to bring you the finest looking, top performing protection for your dollar. Super Gard™ fenders can take the toughest abuse your boat can hand out. Seamless one-piece construction with ribbed sides minimizes roll, and a molded-in valve ensures easy inflation and long life. Double molded black ends for extra strength.
Part No: 950520
|
|
|
|
Home -> Electronics -> Fishfinders -> Transducers and Accessories->Sonar Accessories
Included are: New Portable Transducers: mount on the transom or side of almost any wood, aluminum, or fiberglass boat and are for use at trolling speeds only New Trolling Motor Mount Transducers: designed to mount on to the body of most trolling motors AD-STM Trolling Motor Adaptor: Adapter hardware for attaching high speed sensor to trolling motor Other Thru-hull and transom mount transducers and hardware kits Temperature and speed sensors Transducer switches.
Part No: 720003-1
|
|
|
|
Home -> Boats & Motors -> Inflatable Boats->Inflatable Boat Oar Lock Assemblies
Inflatable Boat Oar Lock Assemblies.
Part No: SSLH250200
|
|
|
|
Home -> Plumbing -> Bilge Pumps -> Electric Bilge Pumps->Cartridge Bilge Pumps
Pumps ship with a 90°, smooth elbow and one straight discharge port. Made of durable, yet resilient polypropylene, these ports install via a convenient one inch garden hose style fitting which eliminates stress cracks caused by overtightening. An added benefit is that the 90° elbow may be rotated to make hose connections easy in cramped mounting locations. Outlet port check valve included for optional use. Removable motor cartridge for easy cleaning. Type: Submersible cartridge bilge pump .
Part No: 32503
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes -> Drain Plugs
Threaded removeable plug. Retention system keeps plug from getting lost. Large 7/8" (27mm) hole for servicing stern drives. Highly polished 316 stainless steel.
Part No: 7557-7
|
|
|
|
Home -> Fishing -> Rods -> Spinning Rods
The Mariner Series, Stand up style and Boat rods, are unique among solid glass rods. The tapers are comparable to more expensive tubular blanks, but miraculously without breakage issues. Lighter than other glass-blank rods, the Mariner is a trusty choice for either style angler.
Part No: 0009-1154
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Dock Bumpers->Dock Pro™ Double-Molded Profiles
Commercial-grade, double-molded PVC dock edging is industrial strength to suit the needs of dock builders, marinas and large boat owners.
Part No: 46032
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
5/16" I. D.
Part No: 034395-10
|
|
|
