Top Sellers
Topsider MVP Oil Changer/Multi-Purpose Pump from BIGBOY
'' Prime the vacuum pump with 50 to 60 strokes, release the pinch clamp on its suction probe, and return in 8 to 10 minutes to find oil and sludge drained into a 2 gallon container Perfect for changing oil inside cramped engine rooms Not to be used with gasoline.
|
CARB GASKET KIT from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Yamaha Carb Kit from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Replaces OMC P/N 378444 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
Impeller, 18-3062 from SIERRA
Recommended replacement schedule is every 3 years for fresh water and every year for salt water Click to view a Sierra Impeller Application Chart (PDF) For further assistance, have your year & model information handy and call our Product Advisors at 1-800-BOATING.
|
For Chrysler/Force, 89-817109A2 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
Water Circulating Pump - #18-3581 - Chrysler Inbd # 3004886, 3619542, 3619859, 3745985 from SIERRA
Water Pumps The water pump is the heart of your inboard or I/O cooling system. All Sierra pumps are bidirectional and can be installed on reverse rotation engines. The pumps are also powder coated for additional protection. Includes mounting gasket. Pumps include brass bi-directional impellers, brass plugs and fittings, carbon resin seal, all mounting gaskets, stainless steel seal cup and spring, stainless steel back plate (where required), and powder coating for maximum corrosion protection.
|
30GPH Cartridge, Replaces Racor S3240 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
|
60GPH Cartridge, Replaces Racor S3227 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
|
10 Micron Replacement Filter Element for OMC 502905 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. Today’s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage.
|
Outdrive Gasket Set, 18-260, TR/TRS, 1973-1993 from SIERRA
Gasket and O-ring kits that seal the drive to the transom.
|
Johnson/Evinrude Outboard Starter, 120 to 140hp V4 (1985-99), 10 tooth drive gear from SIERRA
Sierra's new and remanufactured starters are the only marine starters that meet Marine UL standards. Sierra's remanufactured starters all have new solenoids, drives, bushings, brushes and springs. The bodies are powder coated for greater corrosion resistance. Sierra has entered an agreement with United Technologies to market their complete line of outboard starters and components. All are 100% load tested . Our remanufactured starters are covered by Sierra's customer satisfaction warranty .
|
|
|
|
|
Rejuvenate 2-Cycle Engine Oil, Pint from MERCURY MARINE
Rejuvenate is unlike anything on the market today. It rolls back the clock on engines by quickly removing performance robbing carbon deposits while stabilizing fuel. Powerful detergents remove carbon deposits on piston skirt, crowns and under crowns, power valves, cylinder intake, exhaust and heads. For air-cooled or water-cooled 2-cycle engines with premixed fuel or oil injection systems.
|
|
2" from PERKO, Gasket from SIERRA, Oil from SIERRA, Sealkit from SIERRA
|
|
Home -> Sailboat -> Cleats & Stoppers->Open-Based Cleats - Chromed Zinc, Plastic Base 4 1/2"
We stock a complete selection of cleats for anchoring, docking and general-purpose use. Zinc cleats should be used in fresh water only. Fasteners not included. 4 1/2" long. Requires four #10 FHMS fasteners.
Part No: 1306DP1CHR
|
|
|
|
Home -> Engine Systems -> Fuel Tanks->Series 350/355/368/369 Fire-Acol™ Fuel Hose
Premium fire-retardant marine fuel hose with high-nitrile tube handles alcohol-enhanced gasolines. USCG- and NMMA-approved for use with gasoline and diesel. Reinforced with two layers of high-strength synthetic fabric. Sold by the foot. Select TYPE 1 Low Permeation Feed/Vent Hose or TYPE 2 Vent/Fill Hose. Rating: Feed/vent or vent/fill hose . Approvals: SAE J1527 Type A1 & A2 . Construction: Reinforced hose w/ two layers of high strength fabric . Burst Strength: See model description.
Part No: 116-368-0383
|
|
|
|
Home -> Engine Systems -> Engine Parts
**SealKit-Crankshaft|**SealKit-Crankshaft.
Part No: 18-8355
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories
Similar to M-490 but with top-mounted terminals. Fits panels up to 1" thick.
Part No: M-492-BP
|
|
|
|
Home -> Cordage -> Running Rigging By The Foot -> Running Rigging->Spyderline by the Spool
Very low stretch with a variety of uses This spiderweb sized, high-performance line has a Dyneema SK-75 core inside a polyester double braid cover that provides superior strength for its tiny diameter. It is flexible, yet firm enough to be led through small leads, micro blocks and purchase systems and is also a great choice as sail ties for the performance Opti sailor. Best Use: Performance dinghy cascade systems and control lines . Core Fiber/Construction: Dyneema SK-75 braid .
Part No: 2972-02-00100
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains
Replaces: 43994A2, 821631Q1 For use on R/MR/Alpha One (Sterndrive & Transom Assembly 1983-90).
Part No: 18-6066A
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Tapping Screws - Slotted Oval Head - Bulk
Type 18-8 stainless steel.
Part No: 468
|
|
|
|
Home -> Sailboat -> Downwind Poles & Cars -> Pole End Fittings & Tub->Twist-Lock Pole Repair Kits
Contains all parts to recondition twist-lock telescoping poles, and complete instructions.
Part No: 400009
|
|
|
|
Home -> Electrical -> Meters & Distribution->Feed-Through Terminals
Feed-through terminals are ideal for passing high-current cables through hulls, decks and bulkheads where watertight or vapor-proof integrity must be maintained. These terminals also eliminate chafing and provide strain relief for large cables. Various sizes are available to meet a range of amp requirements. Assorted sizes, amp ratings, base dimensions.
Part No: 2203
|
|
|
|
Home -> Electronics -> VHF Radios & Communications->VHF Radio Accessories
Accessories and kits for Uniden VHF radios include: Battery packs. Flush mount kits. Cords. Speaker mics.
Part No: FMB322W
|
|
|
|
Home -> Electronics -> VHF Radios & Communications -> VHF Accessories->VHF Radio Accessories
Accessories and kits for Uniden VHF radios include: Battery packs. Flush mount kits. Cords. Speaker mics.
Part No: FMB322B
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring -> Anchor Chain
Galvanized, proof-coil anchor chain is PVC coated to protect boat surfaces. Specially formulated PVC offers excellent flexibility and durability.
|
|
|
|
Home -> Engine Systems -> Engine Lubrication
**Oil-SynthBlndMrcrsr5Qt|**Oil-SynthBlndMrcrsr5Qt.
Part No: 18-9440-4
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers -> Boat Support->Bell Assembly Bow Stops
Thermal-plasticized rubber bow stops with bell ends protect your boat's hull from hitting metal bow stop brackets.
Part No: 29300
|
|
|
|
Home -> Cabinet & Deck Hardware -> Rail Fittings & Rub Rail -> Zamak Rail Fittings->Handrail Fittings
Rail fittings let you build rigid bow, stern and cabin top handrail and lifeline systems, providing secure handholds and/or rigid barriers around your boat‘s perimeter. , used on sailboats and larger powerboats. Zamak fittings have a highly polished look when new, but only a modest amount of corrosion resistance when subjected to saltwater, so we recommend them for fresh water environments only. Stainless steel fittings are stronger and have outstanding corrosion resistance, at a premium price.
Part No: F14-0080-1W
|
|
|
|
Home -> Interior, Flags & Gifts -> Sunshowers & Sunscreen->Dry Lite Towels
The DryLite™ Towel is exactly what you want in a microfiber towel: it’s soft and thirsty, but compact and quick drying. Available in five sizes from hand towel size up to a beach towel size. Ideal for boating, camping or travel. Microfiber with super soft ultra-suede finish. Remarkably absorbent and fast drying. Lightweight & very compact. Machine washable.
Part No: 274
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Plastic Check Valves
For use in installations where an in-line check valve is required.
Part No: LV1215
|
|
|
|
Home -> Electrical -> Interior Lighting->Marine Linear Strips
Ultra-bright exterior LED accent lights are great for use aboard your boat or vehicle. Easily connect to any 12V battery and can be connected together in a series. Light Style: Interior/Exterior linear access strips. Voltage/Draw: 40mA. Fixture Dimensions: 8"L x 3/4"W x 3/4"D. Mounting Hardware Included/Required: Includes two screws. Wiring Hardware Included/Required: Includes wiring harness with fuse.
Part No: 1043631
|
|
|
|
Breathable rip/stop polyester fabric plus air vents provide optimum protection and ventilation for your seats, especially in hot and humid climates. Polyurethane coating on the inside prevents color transfer or bleed-through . Comes with drawstring hem . Available for most popular seat styles .
Part No: 80220
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Propeller Hardware Kits, Tools & Accessories
Hardware kit consists of two washers only, check your model number for the appropriate part, tool or kit.
Part No: 827614Q01
|
|
|
|
Home -> Plumbing -> Bilge Pumps -> Bilge Pump Parts->Replacement Parts
.
Part No: 30004-0000
|
|
|
|
Home -> Anchor & Docking -> Anchors -> River/Lake Anchors->Mushroom Anchors
The ideal size and weight for skiffs, canoes, inflatables and other small boats in calm waters.
Part No: 508-B
|
|
|
|
Home -> Books & Videos -> Books
The Story of Choices, Families, Time Commitments, and How We Can Create a Better Future.
Part No: CHB001
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Dock Hardware->Flip Up Dock Cleats
These sleek, low-profile cleats fold down and out of the way when not in use. The smooth rounded surfaces are made of solid aluminum with a white polyester power coating. Predrilled for mounting with 3/8" carriage bolts (hardware sold seperately). .
Part No: 2606W-F
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Marelon Mushroom Heads, Barbed
253 Series Hose tailpipe/Mushroom Head.
Part No: 906031
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting->Replacement Bulbs for Aqua Lights Underwater Lights
**AquaLight Bulb 175W Halide W|**AquaLight Bulb 175W Halide W.
Part No: AL75BH24V
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Gasket-Push Rod Cover|**Gasket-Push Rod Cover.
Part No: 18-2815
|
|
|
|
Shakespeare's Style 4720 Economy Rail Mount is designed for quick and easy installation on vertical or horizontal, straight or angled rails. Its simple design makes installation a snap. The vice section grips the rail, and the flat section supports the antenna. The flat section can also be bolted to a flat surface, instead of to the rail grip. Standard 1" - 14 thread. Nylon adapters included for 7/8", 1", and 1¼" vertical or horizontal rails.
Part No: 4720
|
|
|
|
Home -> Sailboat -> Rigging Products
Backing plate for Schaefer 78-17 padeye.
Part No: 97-54
|
|
|
|
Home -> Navigation -> Compasses & Navigation Tools -> Plotting Tools->Matte Nickel Dividers
Lightweight, straight leg brass dividers have a matte nickel plating for durability in the marine environment.
Part No: 1043
|
|
|